[U-Boot] [PATCH 3/3] board: puma: Use rockchip_* helpers to setup cpuid and macaddr

[Rohan Garg]

Signed-off-by: Rohan Garg <rohan.garg at collabora.com>
---

 .../puma_rk3399/puma-rk3399.c                 | 98 ++-----------------
 1 file changed, 8 insertions(+), 90 deletions(-)

diff --git a/board/theobroma-systems/puma_rk3399/puma-rk3399.c b/board/theobroma-systems/puma_rk3399/puma-rk3399.c
index 251cd2d566..af94ed998a 100644
--- a/board/theobroma-systems/puma_rk3399/puma-rk3399.c
+++ b/board/theobroma-systems/puma_rk3399/puma-rk3399.c
@@ -17,6 +17,7 @@
 #include <asm/arch-rockchip/clock.h>
 #include <asm/arch-rockchip/hardware.h>
 #include <asm/arch-rockchip/grf_rk3399.h>
+#include <asm/arch-rockchip/misc.h>
 #include <asm/arch-rockchip/periph.h>
 #include <power/regulator.h>
 #include <u-boot/sha256.h>
@@ -36,94 +37,6 @@ int board_init(void)
 	return 0;
 }
 
-static void setup_macaddr(void)
-{
-#if CONFIG_IS_ENABLED(CMD_NET)
-	int ret;
-	const char *cpuid = env_get("cpuid#");
-	u8 hash[SHA256_SUM_LEN];
-	int size = sizeof(hash);
-	u8 mac_addr[6];
-
-	/* Only generate a MAC address, if none is set in the environment */
-	if (env_get("ethaddr"))
-		return;
-
-	if (!cpuid) {
-		debug("%s: could not retrieve 'cpuid#'\n", __func__);
-		return;
-	}
-
-	ret = hash_block("sha256", (void *)cpuid, strlen(cpuid), hash, &size);
-	if (ret) {
-		debug("%s: failed to calculate SHA256\n", __func__);
-		return;
-	}
-
-	/* Copy 6 bytes of the hash to base the MAC address on */
-	memcpy(mac_addr, hash, 6);
-
-	/* Make this a valid MAC address and set it */
-	mac_addr[0] &= 0xfe;  /* clear multicast bit */
-	mac_addr[0] |= 0x02;  /* set local assignment bit (IEEE802) */
-	eth_env_set_enetaddr("ethaddr", mac_addr);
-#endif
-}
-
-static void setup_serial(void)
-{
-#if CONFIG_IS_ENABLED(ROCKCHIP_EFUSE)
-	const u32 cpuid_offset = 0x7;
-	const u32 cpuid_length = 0x10;
-
-	struct udevice *dev;
-	int ret, i;
-	u8 cpuid[cpuid_length];
-	u8 low[cpuid_length/2], high[cpuid_length/2];
-	char cpuid_str[cpuid_length * 2 + 1];
-	u64 serialno;
-	char serialno_str[17];
-
-	/* retrieve the device */
-	ret = uclass_get_device_by_driver(UCLASS_MISC,
-					  DM_GET_DRIVER(rockchip_efuse), &dev);
-	if (ret) {
-		debug("%s: could not find efuse device\n", __func__);
-		return;
-	}
-
-	/* read the cpu_id range from the efuses */
-	ret = misc_read(dev, cpuid_offset, &cpuid, sizeof(cpuid));
-	if (ret) {
-		debug("%s: reading cpuid from the efuses failed\n",
-		      __func__);
-		return;
-	}
-
-	memset(cpuid_str, 0, sizeof(cpuid_str));
-	for (i = 0; i < 16; i++)
-		sprintf(&cpuid_str[i * 2], "%02x", cpuid[i]);
-
-	debug("cpuid: %s\n", cpuid_str);
-
-	/*
-	 * Mix the cpuid bytes using the same rules as in
-	 *   ${linux}/drivers/soc/rockchip/rockchip-cpuinfo.c
-	 */
-	for (i = 0; i < 8; i++) {
-		low[i] = cpuid[1 + (i << 1)];
-		high[i] = cpuid[i << 1];
-	}
-
-	serialno = crc32_no_comp(0, low, 8);
-	serialno |= (u64)crc32_no_comp(serialno, high, 8) << 32;
-	snprintf(serialno_str, sizeof(serialno_str), "%016llx", serialno);
-
-	env_set("cpuid#", cpuid_str);
-	env_set("serial#", serialno_str);
-#endif
-}
-
 static void setup_iodomain(void)
 {
 	const u32 GRF_IO_VSEL_GPIO4CD_SHIFT = 3;
@@ -213,8 +126,13 @@ static int setup_boottargets(void)
 
 int misc_init_r(void)
 {
-	setup_serial();
-	setup_macaddr();
+	const u32 cpuid_offset = 0x7;
+	const u32 cpuid_length = 0x10;
+	u8 cpuid[cpuid_length];
+
+	rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid);
+	rockchip_cpuid_set(cpuid, cpuid_length);
+	rockchip_setup_macaddr();
 	setup_iodomain();
 	setup_boottargets();
 
-- 
2.17.1