[U-Boot] [PATCH] common: fdt_support: Add missing cpu_to_fdt32() to fdt_pci_dma_ranges()
Marek Vasut
marek.vasut at gmail.com
Tue Jul 9 01:33:40 UTC 2019
On 7/9/19 2:49 AM, Marek Vasut wrote:
> The fdt_pci_dma_ranges() cannot work on e.g. ARM, since the DT entries
> endianness is not adjusted at all. Fix this.
>
> Signed-off-by: Marek Vasut <marek.vasut+renesas at gmail.com>
> Cc: Tom Rini <trini at konsulko.com>
+CC Simon
> ---
> common/fdt_support.c | 25 ++++++++++++++-----------
> 1 file changed, 14 insertions(+), 11 deletions(-)
>
> diff --git a/common/fdt_support.c b/common/fdt_support.c
> index f31e9b0cc5..e0043e8da6 100644
> --- a/common/fdt_support.c
> +++ b/common/fdt_support.c
> @@ -671,30 +671,33 @@ int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose) {
>
> dma_range[0] = 0;
> if (size >= 0x100000000ull)
> - dma_range[0] |= FDT_PCI_MEM64;
> + dma_range[0] |= cpu_to_fdt32(FDT_PCI_MEM64);
> else
> - dma_range[0] |= FDT_PCI_MEM32;
> + dma_range[0] |= cpu_to_fdt32(FDT_PCI_MEM32);
> if (hose->regions[r].flags & PCI_REGION_PREFETCH)
> - dma_range[0] |= FDT_PCI_PREFETCH;
> + dma_range[0] |= cpu_to_fdt32(FDT_PCI_PREFETCH);
> #ifdef CONFIG_SYS_PCI_64BIT
> - dma_range[1] = bus_start >> 32;
> + dma_range[1] = cpu_to_fdt32(bus_start >> 32);
> #else
> dma_range[1] = 0;
> #endif
> - dma_range[2] = bus_start & 0xffffffff;
> + dma_range[2] = cpu_to_fdt32(bus_start & 0xffffffff);
>
> if (addrcell == 2) {
> - dma_range[3] = phys_start >> 32;
> - dma_range[4] = phys_start & 0xffffffff;
> + dma_range[3] = cpu_to_fdt32(phys_start >> 32);
> + dma_range[4] = cpu_to_fdt32(phys_start & 0xffffffff);
> } else {
> - dma_range[3] = phys_start & 0xffffffff;
> + dma_range[3] = cpu_to_fdt32(phys_start & 0xffffffff);
> }
>
> if (sizecell == 2) {
> - dma_range[3 + addrcell + 0] = size >> 32;
> - dma_range[3 + addrcell + 1] = size & 0xffffffff;
> + dma_range[3 + addrcell + 0] =
> + cpu_to_fdt32(size >> 32);
> + dma_range[3 + addrcell + 1] =
> + cpu_to_fdt32(size & 0xffffffff);
> } else {
> - dma_range[3 + addrcell + 0] = size & 0xffffffff;
> + dma_range[3 + addrcell + 0] =
> + cpu_to_fdt32(size & 0xffffffff);
> }
>
> dma_range += (3 + addrcell + sizecell);
>
--
Best regards,
Marek Vasut
More information about the U-Boot
mailing list