[U-Boot] [PATCH v2 3/5] configs: ls1088a: enable DM support for pcf2127 rtc

[Chuanhua Han]

Enable related configs to support pcf2127 rtc DM feature for
ls1088ardb board.

Signed-off-by: Chuanhua Han <chuanhua.han at nxp.com>
---
depends on: 
	- http://patchwork.ozlabs.org/project/uboot/list/?series=110856
	- http://patchwork.ozlabs.org/project/uboot/list/?series=109459

Changes in v2: 
	-No change.

 configs/ls1088ardb_tfa_SECURE_BOOT_defconfig |    8 +++++++-
 configs/ls1088ardb_tfa_defconfig             |    8 +++++++-
 2 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig
index 3c4437d..364fc59 100644
--- a/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1088ARDB=y
+CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SECURE_BOOT=y
 CONFIG_QSPI_AHB_INIT=y
@@ -9,7 +10,6 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -63,3 +63,9 @@ CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_RSA_SOFTWARE_EXP=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_RTC=y
+CONFIG_DM_GPIO=y
+CONFIG_RTC_PCF2127=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
diff --git a/configs/ls1088ardb_tfa_defconfig b/configs/ls1088ardb_tfa_defconfig
index 8cea8c7..eb35782 100644
--- a/configs/ls1088ardb_tfa_defconfig
+++ b/configs/ls1088ardb_tfa_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1088ARDB=y
+CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_TFABOOT=y
@@ -8,7 +9,6 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -61,3 +61,9 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_GADGET=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_RTC=y
+CONFIG_DM_GPIO=y
+CONFIG_RTC_PCF2127=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
-- 
1.7.1