[U-Boot] [PATCH v4 3/4] configs: ls1028a: enable DM support for pcf2127 rtc

[Chuanhua Han]

Enable related configs to support pcf2127 rtc DM feature for
ls1028ardb board.

Signed-off-by: Chuanhua Han <chuanhua.han at nxp.com>
---
depends on: 
	- https://patchwork.ozlabs.org/project/uboot/list/?series=113364
	- https://patchwork.ozlabs.org/project/uboot/list/?series=110856
	- https://patchwork.ozlabs.org/project/uboot/list/?series=109677    

Changes in v4:
	- Add configuration options for i2c dm to set default bus number Settings.
Changes in v3:
	- No change.
Changes in v2: 
	-  Enable secure boot defconfig to support pcf2127 rtc DM
feature for ls1028ardb board.

 configs/ls1028ardb_tfa_SECURE_BOOT_defconfig |    11 ++++++++++-
 configs/ls1028ardb_tfa_defconfig             |    11 ++++++++++-
 2 files changed, 20 insertions(+), 2 deletions(-)

diff --git a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
index 3432f90..c101a33 100644
--- a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1028ARDB=y
+CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_SECURE_BOOT=y
 CONFIG_SYS_FSL_SDHC_CLK_DIV=1
 CONFIG_TFABOOT=y
@@ -8,7 +9,6 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -60,3 +60,12 @@ CONFIG_WDT=y
 CONFIG_WDT_SP805=y
 CONFIG_RSA=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_DM_RTC=y
+CONFIG_DM_GPIO=y
+CONFIG_CMD_DATE=y
+CONFIG_RTC_PCF2127=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
diff --git a/configs/ls1028ardb_tfa_defconfig b/configs/ls1028ardb_tfa_defconfig
index c65e37d..a2fe8d6 100644
--- a/configs/ls1028ardb_tfa_defconfig
+++ b/configs/ls1028ardb_tfa_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1028ARDB=y
+CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_SYS_FSL_SDHC_CLK_DIV=1
 CONFIG_TFABOOT=y
 CONFIG_NR_DRAM_BANKS=2
@@ -7,7 +8,6 @@ CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
@@ -63,3 +63,12 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_WDT=y
 CONFIG_WDT_SP805=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0
+CONFIG_DM_RTC=y
+CONFIG_DM_GPIO=y
+CONFIG_CMD_DATE=y
+CONFIG_RTC_PCF2127=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
-- 
1.7.1