[U-Boot] [PATCH v3 07/18] ram: rk3399: Add pctl start support

[Kever Yang]

On 2019/7/16 上午2:28, Jagan Teki wrote:
> Add support for pctl start for both channel 0, 1 control
> and phy registers.
>
> This would also handle pwrup_srefresh_exit init based
> on the channel number.
>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> Signed-off-by: YouMin Chen <cym at rock-chips.com>

Reviewed-by: Kever Yang <Kever.yang at rock-chips.com>

Thanks,
  - Kever
> ---
>   drivers/ram/rockchip/sdram_rk3399.c | 75 +++++++++++++++++++++--------
>   1 file changed, 55 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/ram/rockchip/sdram_rk3399.c b/drivers/ram/rockchip/sdram_rk3399.c
> index 6e944cafd9..084c949728 100644
> --- a/drivers/ram/rockchip/sdram_rk3399.c
> +++ b/drivers/ram/rockchip/sdram_rk3399.c
> @@ -49,10 +49,11 @@ struct chan_info {
>   struct dram_info {
>   #if defined(CONFIG_TPL_BUILD) || \
>   	(!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD))
> -	u32 pwrup_srefresh_exit;
> +	u32 pwrup_srefresh_exit[2];
>   	struct chan_info chan[2];
>   	struct clk ddr_clk;
>   	struct rk3399_cru *cru;
> +	struct rk3399_grf_regs *grf;
>   	struct rk3399_pmucru *pmucru;
>   	struct rk3399_pmusgrf_regs *pmusgrf;
>   	struct rk3399_ddr_cic_regs *cic;
> @@ -73,6 +74,11 @@ struct rockchip_dmc_plat {
>   	struct regmap *map;
>   };
>   
> +static void *get_ddrc0_con(struct dram_info *dram, u8 channel)
> +{
> +	return (channel == 0) ? &dram->grf->ddrc0_con0 : &dram->grf->ddrc0_con1;
> +}
> +
>   static void copy_to_reg(u32 *dest, const u32 *src, u32 n)
>   {
>   	int i;
> @@ -328,6 +334,48 @@ static void set_ds_odt(const struct chan_info *chan,
>   	clrsetbits_le32(&denali_phy[930], 0x1 << 17, reg_value);
>   }
>   
> +static void pctl_start(struct dram_info *dram, u8 channel)
> +{
> +	const struct chan_info *chan = &dram->chan[channel];
> +	u32 *denali_ctl = chan->pctl->denali_ctl;
> +	u32 *denali_phy = chan->publ->denali_phy;
> +	u32 *ddrc0_con = get_ddrc0_con(dram, channel);
> +	u32 count = 0;
> +	u32 byte, tmp;
> +
> +	writel(0x01000000, &ddrc0_con);
> +
> +	clrsetbits_le32(&denali_phy[957], 0x3 << 24, 0x2 << 24);
> +
> +	while (!(readl(&denali_ctl[203]) & (1 << 3))) {
> +		if (count > 1000) {
> +			printf("%s: Failed to init pctl for channel %d\n",
> +			       __func__, channel);
> +			while (1)
> +				;
> +		}
> +
> +		udelay(1);
> +		count++;
> +	}
> +
> +	writel(0x01000100, &ddrc0_con);
> +
> +	for (byte = 0; byte < 4; byte++) {
> +		tmp = 0x820;
> +		writel((tmp << 16) | tmp, &denali_phy[53 + (128 * byte)]);
> +		writel((tmp << 16) | tmp, &denali_phy[54 + (128 * byte)]);
> +		writel((tmp << 16) | tmp, &denali_phy[55 + (128 * byte)]);
> +		writel((tmp << 16) | tmp, &denali_phy[56 + (128 * byte)]);
> +		writel((tmp << 16) | tmp, &denali_phy[57 + (128 * byte)]);
> +
> +		clrsetbits_le32(&denali_phy[58 + (128 * byte)], 0xffff, tmp);
> +	}
> +
> +	clrsetbits_le32(&denali_ctl[68], PWRUP_SREFRESH_EXIT,
> +			dram->pwrup_srefresh_exit[channel]);
> +}
> +
>   static int phy_io_config(const struct chan_info *chan,
>   			 const struct rk3399_sdram_params *params)
>   {
> @@ -498,7 +546,6 @@ static int pctl_cfg(struct dram_info *dram, const struct chan_info *chan,
>   	const u32 *params_phy = params->phy_regs.denali_phy;
>   	u32 tmp, tmp1, tmp2;
>   	int ret;
> -	const ulong timeout_ms = 200;
>   
>   	/*
>   	 * work around controller bug:
> @@ -518,8 +565,8 @@ static int pctl_cfg(struct dram_info *dram, const struct chan_info *chan,
>   	writel(params->phy_regs.denali_phy[911], &denali_phy[911]);
>   	writel(params->phy_regs.denali_phy[912], &denali_phy[912]);
>   
> -	dram->pwrup_srefresh_exit = readl(&denali_ctl[68]) &
> -				    PWRUP_SREFRESH_EXIT;
> +	dram->pwrup_srefresh_exit[channel] = readl(&denali_ctl[68]) &
> +					     PWRUP_SREFRESH_EXIT;
>   	clrbits_le32(&denali_ctl[68], PWRUP_SREFRESH_EXIT);
>   
>   	/* PHY_DLL_RST_EN */
> @@ -580,22 +627,6 @@ static int pctl_cfg(struct dram_info *dram, const struct chan_info *chan,
>   	if (ret)
>   		return ret;
>   
> -	/* PHY_DLL_RST_EN */
> -	clrsetbits_le32(&denali_phy[957], 0x3 << 24, 0x2 << 24);
> -
> -	/* Waiting for PHY and DRAM init complete */
> -	tmp = get_timer(0);
> -	do {
> -		if (get_timer(tmp) > timeout_ms) {
> -			pr_err("DRAM (%s): phy failed to lock within  %ld ms\n",
> -			       __func__, timeout_ms);
> -			return -ETIME;
> -		}
> -	} while (!(readl(&denali_ctl[203]) & (1 << 3)));
> -	debug("DRAM (%s): phy locked after %ld ms\n", __func__, get_timer(tmp));
> -
> -	clrsetbits_le32(&denali_ctl[68], PWRUP_SREFRESH_EXIT,
> -			dram->pwrup_srefresh_exit);
>   	return 0;
>   }
>   
> @@ -1186,6 +1217,9 @@ static int sdram_init(struct dram_info *dram,
>   			return ret;
>   		}
>   
> +		/* start to trigger initialization */
> +		pctl_start(dram, channel);
> +
>   		/* LPDDR2/LPDDR3 need to wait DAI complete, max 10us */
>   		if (dramtype == LPDDR3)
>   			udelay(10);
> @@ -1262,6 +1296,7 @@ static int rk3399_dmc_init(struct udevice *dev)
>   #endif
>   
>   	priv->cic = syscon_get_first_range(ROCKCHIP_SYSCON_CIC);
> +	priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
>   	priv->pmugrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF);
>   	priv->pmusgrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUSGRF);
>   	priv->pmucru = rockchip_get_pmucru();