[U-Boot] [PATCH v4 0/4] SiFive SPI MMC Support

[Anup Patel]

This patchset adds:
1. SiFive SPI driver
2. New MMC SPI driver based on DM_MMC and DM_SPI
3. Enables SiFive SPI driver and MMC SPI driver for SiFive Unleashed board

With this patch series, we can now load files from SD card on SiFive
Unleashed board. Many thanks to Bhargav for porting SiFive SPI driver
and updating MMC SPI driver for us.

These patches can be also found in riscv_unleashed_mmc_spi_v4 branch of:
https//github.com/avpatel/u-boot.git

Changes since v3:
- Removed PATCH2, PATCH3, and PATCH4 because these are already merged
- Added separate patch to use SPI_XFER_xyz flags in MMC_SPI driver
- Use readl/writel directly instead of sifive_spi_read/sifi_spi_write
- Use SPI_XFER_xyz flags to enable/disable chipselect
- Remove unused callback sifive_spi_cs_info()

Changes since v2:
- Minor fixes in PATCH1 which adds SiFive SPI driver
- Removed CONFIG_MMC_SPI_xyz from scripts/config_whitelist.txt
- Removed cmd/mmc_spi and all its refrences as separate patch
- Removed DM_SPI and DM_MMC from SiFive FU540 Kconfig

Changes since v1:
- Make response matching part belongs to mmc_spi_sendcmd()
- Match response to zero for SEND_STATUS (CMD13)
- Add separate patch for updating SiFive FU540 Documentation

Anup Patel (2):
  mmc: mmc_spi: Use SPI_XFER_BEGIN and SPI_XFER_END flags
  doc: sifive-fu540: Update README for SiFive SPI and MMC SPI drivers

Bhargav Shah (2):
  spi: Add SiFive SPI driver
  riscv: sifive: fu540: Enable SiFive SPI and MMC SPI drivers

 board/sifive/fu540/Kconfig |   6 +
 doc/README.sifive-fu540    |   4 +-
 drivers/mmc/mmc_spi.c      |   4 +-
 drivers/spi/Kconfig        |   8 +
 drivers/spi/Makefile       |   1 +
 drivers/spi/spi-sifive.c   | 361 +++++++++++++++++++++++++++++++++++++
 6 files changed, 380 insertions(+), 4 deletions(-)
 create mode 100644 drivers/spi/spi-sifive.c

--
2.17.1