[U-Boot] [PATCH v2 22/22] ARM: uniphier: set {kernel, ramdisk, fdt}_addr_r at boot-time
Masahiro Yamada
yamada.masahiro at socionext.com
Wed Jul 10 11:07:50 UTC 2019
The base of DRAM will be changed for the next generation SoC.
The addresses needed for booting the kernel should be shifted
according to the DRAM base.
Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
---
arch/arm/mach-uniphier/board_late_init.c | 4 ++++
include/configs/uniphier.h | 14 +++++++-------
2 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-uniphier/board_late_init.c b/arch/arm/mach-uniphier/board_late_init.c
index 4701a2892379..3180b24330b4 100644
--- a/arch/arm/mach-uniphier/board_late_init.c
+++ b/arch/arm/mach-uniphier/board_late_init.c
@@ -139,5 +139,9 @@ int board_late_init(void)
uniphier_set_env_addr("loadaddr", "loadaddr_offset");
+ uniphier_set_env_addr("kernel_addr_r", "kernel_addr_r_offset");
+ uniphier_set_env_addr("ramdisk_addr_r", "ramdisk_addr_r_offset");
+ uniphier_set_env_addr("fdt_addr_r", "fdt_addr_r_offset");
+
return 0;
}
diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index 6d3d9b318881..68568f412245 100644
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -121,8 +121,8 @@
#ifdef CONFIG_FIT
#define CONFIG_BOOTFILE "fitImage"
+#define KERNEL_ADDR_R_OFFSET "0x05100000"
#define LINUXBOOT_ENV_SETTINGS \
- "kernel_addr_r=0x85100000\0" \
"tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
"bootm $kernel_addr_r\0" \
"__nfsboot=run tftpboot\0"
@@ -130,17 +130,13 @@
#ifdef CONFIG_ARM64
#define CONFIG_BOOTFILE "Image"
#define LINUXBOOT_CMD "booti"
-#define KERNEL_ADDR_R "kernel_addr_r=0x82080000\0"
+#define KERNEL_ADDR_R_OFFSET "0x02080000"
#else
#define CONFIG_BOOTFILE "zImage"
#define LINUXBOOT_CMD "bootz"
-#define KERNEL_ADDR_R "kernel_addr_r=0x80208000\0"
+#define KERNEL_ADDR_R_OFFSET "0x00208000"
#endif
#define LINUXBOOT_ENV_SETTINGS \
- "fdt_addr_r=0x85100000\0" \
- KERNEL_ADDR_R \
- "ramdisk_addr_r=0x86000000\0" \
- "ramdisk_file=rootfs.cpio.gz\0" \
"boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 && " \
LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
"tftpboot=tftpboot $kernel_addr_r $bootfile && " \
@@ -155,6 +151,10 @@
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
+ "fdt_addr_r_offset=0x05100000\0" \
+ "kernel_addr_r_offset=" KERNEL_ADDR_R_OFFSET "\0" \
+ "ramdisk_addr_r_offset=0x06000000\0" \
+ "ramdisk_file=rootfs.cpio.gz\0" \
"netdev=eth0\0" \
"initrd_high=0xffffffffffffffff\0" \
"loadaddr_offset=0x05000000\0" \
--
2.17.1
More information about the U-Boot
mailing list