[U-Boot] [PATCH v10 4/4] doc: sifive-fu540: Update README to explicitly load DTB for Linux

[Anup Patel]

On Fri, Jul 26, 2019 at 12:27 AM Joe Hershberger <joe.hershberger at ni.com> wrote:
>
> On Mon, Jul 22, 2019 at 2:59 AM Anup Patel <Anup.Patel at wdc.com> wrote:
> >
> > We should explicitly load DTB from TFTP server or MMC/SD card
> > for Linux booting. This will allow us:
> > 1. To use different Linux DTB for SiFive Unleashed board with
> >    expansion board connected.
> > 2. Avoid re-flashing OpenSBI firmware whenever board connections
> >    change.
> >
> > This patch updates reference bootlog in SiFive FU540 README
> > as-per above.
> >
> > Signed-off-by: Anup Patel <anup.patel at wdc.com>
>
> Bad luck... This patch conflicts with [1] that recently went into
> mainline from Bin.
>
> Please rework and resend.

No problem, I will rework this patch.

Thanks,
Anup

>
> Thanks,
> -Joe
>
> [1] - https://patchwork.ozlabs.org/patch/1133598/
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot