[U-Boot] [PATCH v5 6/8] rockchip: config: update config for TPL support on tinker-rk3288

[Kever Yang]

We need to update TEXT BASE for TPL/SPL/U-Boot;
SPL no need relocate STACK after enable TPL, so remove it;
Don't enable pinctrl names so that SPL can get pinctrl dts;

Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
---

Changes in v5: None
Changes in v4: None
Changes in v2: None

 configs/tinker-rk3288_defconfig | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/configs/tinker-rk3288_defconfig b/configs/tinker-rk3288_defconfig
index 0e8cf73fe9..e429c0c6f2 100644
--- a/configs/tinker-rk3288_defconfig
+++ b/configs/tinker-rk3288_defconfig
@@ -1,13 +1,12 @@
 CONFIG_ARM=y
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_SYS_TEXT_BASE=0x00000000
+CONFIG_SYS_TEXT_BASE=0x01000000
 CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_ROCKCHIP_RK3288=y
-CONFIG_SPL_SIZE_LIMIT=30720
-CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y
+CONFIG_TPL_LDSCRIPT="arch/arm/mach-rockchip/u-boot-tpl.lds"
 CONFIG_TARGET_TINKER_RK3288=y
 CONFIG_NR_DRAM_BANKS=1
-CONFIG_SPL_STACK_R_ADDR=0x80000
+CONFIG_SPL_SIZE_LIMIT=400000
 CONFIG_DEBUG_UART_BASE=0xff690000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_DEBUG_UART=y
@@ -17,9 +16,7 @@ CONFIG_CONSOLE_MUX=y
 CONFIG_DEFAULT_FDT_FILE="rk3288-tinker.dtb"
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
-CONFIG_SPL_TEXT_BASE=0xff704000
-CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
+CONFIG_SPL_TEXT_BASE=0
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
@@ -37,7 +34,7 @@ CONFIG_CMD_REGULATOR=y
 CONFIG_SPL_PARTITION_UUIDS=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="rk3288-tinker"
-CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_REGMAP=y
 CONFIG_SPL_REGMAP=y
-- 
2.20.1