[U-Boot] [PATCH v3 35/57] ram: rk3399: Add tsel control clock drive

[Kever Yang]

On 2019/7/16 下午7:57, Jagan Teki wrote:
> tsel contrl clock drives are required to configure PHY
> 929, 939 controls drive settings.
>
> Add support for these control clock for all dramtype
> sdrams.
>
> Thse control clock drives are configure via tsel_ckcs_select_p
> and tsel_ckcs_select_n variables.
>
> tsel_ckcs_select_n is PHY_DRV_ODT_34_3 value where as
> tsel_ckcs_select_p is retrived from IO settings for lpddr4
> and rest uses PHY_DRV_ODT_34_3.
>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> Signed-off-by: YouMin Chen <cym at rock-chips.com>

Reviewed-by: Kever Yang <Kever.yang at rock-chips.com>

Thanks,
  - Kever
> ---
>   drivers/ram/rockchip/sdram_rk3399.c | 16 ++++++++++++++--
>   1 file changed, 14 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/ram/rockchip/sdram_rk3399.c b/drivers/ram/rockchip/sdram_rk3399.c
> index 1b8ce5160f..c38ea1d284 100644
> --- a/drivers/ram/rockchip/sdram_rk3399.c
> +++ b/drivers/ram/rockchip/sdram_rk3399.c
> @@ -560,6 +560,7 @@ static void set_ds_odt(const struct chan_info *chan,
>   	u32 tsel_idle_select_n, tsel_rd_select_n;
>   	u32 tsel_wr_select_dq_p, tsel_wr_select_ca_p;
>   	u32 tsel_wr_select_dq_n, tsel_wr_select_ca_n;
> +	u32 tsel_ckcs_select_p, tsel_ckcs_select_n;
>   	struct io_setting *io = NULL;
>   	u32 reg_value;
>   
> @@ -577,6 +578,9 @@ static void set_ds_odt(const struct chan_info *chan,
>   
>   		tsel_wr_select_ca_p = io->wr_ca_drv;
>   		tsel_wr_select_ca_n = PHY_DRV_ODT_40;
> +
> +		tsel_ckcs_select_p = io->wr_ckcs_drv;
> +		tsel_ckcs_select_n = PHY_DRV_ODT_34_3;
>   	} else if (params->base.dramtype == LPDDR3) {
>   		tsel_rd_select_p = PHY_DRV_ODT_240;
>   		tsel_rd_select_n = PHY_DRV_ODT_HI_Z;
> @@ -589,6 +593,9 @@ static void set_ds_odt(const struct chan_info *chan,
>   
>   		tsel_wr_select_ca_p = PHY_DRV_ODT_48;
>   		tsel_wr_select_ca_n = PHY_DRV_ODT_48;
> +
> +		tsel_ckcs_select_p = PHY_DRV_ODT_34_3;
> +		tsel_ckcs_select_n = PHY_DRV_ODT_34_3;
>   	} else {
>   		tsel_rd_select_p = PHY_DRV_ODT_240;
>   		tsel_rd_select_n = PHY_DRV_ODT_240;
> @@ -601,6 +608,9 @@ static void set_ds_odt(const struct chan_info *chan,
>   
>   		tsel_wr_select_ca_p = PHY_DRV_ODT_34_3;
>   		tsel_wr_select_ca_n = PHY_DRV_ODT_34_3;
> +
> +		tsel_ckcs_select_p = PHY_DRV_ODT_34_3;
> +		tsel_ckcs_select_n = PHY_DRV_ODT_34_3;
>   	}
>   
>   	if (params->base.odt == 1)
> @@ -659,10 +669,12 @@ static void set_ds_odt(const struct chan_info *chan,
>   	clrsetbits_le32(&denali_phy[935], 0xff, reg_value);
>   
>   	/* phy_pad_cs_drive 8bits DENALI_PHY_939 offset_0 */
> -	clrsetbits_le32(&denali_phy[939], 0xff, reg_value);
> +	clrsetbits_le32(&denali_phy[939], 0xff,
> +			tsel_ckcs_select_n | (tsel_ckcs_select_p << 0x4));
>   
>   	/* phy_pad_clk_drive 8bits DENALI_PHY_929 offset_0 */
> -	clrsetbits_le32(&denali_phy[929], 0xff, reg_value);
> +	clrsetbits_le32(&denali_phy[929], 0xff,
> +			tsel_ckcs_select_n | (tsel_ckcs_select_p << 0x4));
>   
>   	/* phy_pad_fdbk_drive 23bit DENALI_PHY_924/925 */
>   	clrsetbits_le32(&denali_phy[924], 0xff,