[U-Boot] [PATCH 19/24] rockchip: rk3328: Migrate to use common board file

[Matwey V. Kornilov]

22.07.2019 15:02, Kever Yang пишет:
> Use common board file for board_init() and board_late_init(),
> for Rockchip SoCs have very similar process.
> 
> Signed-off-by: Kever Yang <kever.yang at rock-chips.com>

Tested-by: Matwey V. Kornilov <matwey.kornilov at gmail.com>

Hi,

I've just checked that rock64-rk3328_defconfig is still bootable with
this series.

> ---
> 
>  arch/arm/mach-rockchip/Kconfig         |  1 +
>  board/rockchip/evb_rk3328/evb-rk3328.c | 64 --------------------------
>  2 files changed, 1 insertion(+), 64 deletions(-)
> 
> diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
> index b75c209b66..2b8bb8aa25 100644
> --- a/arch/arm/mach-rockchip/Kconfig
> +++ b/arch/arm/mach-rockchip/Kconfig
> @@ -110,6 +110,7 @@ config ROCKCHIP_RK3328
>  	select ARM64
>  	select SUPPORT_SPL
>  	select SPL
> +	imply ROCKCHIP_COMMON_BOARD
>  	imply SPL_ROCKCHIP_COMMON_BOARD
>  	imply SPL_SERIAL_SUPPORT
>  	imply SPL_SEPARATE_BSS
> diff --git a/board/rockchip/evb_rk3328/evb-rk3328.c b/board/rockchip/evb_rk3328/evb-rk3328.c
> index 64595c783d..779bc646b2 100644
> --- a/board/rockchip/evb_rk3328/evb-rk3328.c
> +++ b/board/rockchip/evb_rk3328/evb-rk3328.c
> @@ -3,67 +3,3 @@
>   * (C) Copyright 2016 Rockchip Electronics Co., Ltd
>   */
>  
> -#include <common.h>
> -#include <asm/armv8/mmu.h>
> -#include <dwc3-uboot.h>
> -#include <power/regulator.h>
> -#include <usb.h>
> -
> -DECLARE_GLOBAL_DATA_PTR;
> -
> -int board_init(void)
> -{
> -	int ret;
> -
> -	ret = regulators_enable_boot_on(false);
> -	if (ret)
> -		debug("%s: Cannot enable boot on regulator\n", __func__);
> -
> -	return ret;
> -}
> -
> -#if defined(CONFIG_USB_GADGET) && defined(CONFIG_USB_GADGET_DWC2_OTG)
> -#include <usb.h>
> -#include <usb/dwc2_udc.h>
> -
> -static struct dwc2_plat_otg_data otg_data = {
> -	.rx_fifo_sz	= 512,
> -	.np_tx_fifo_sz	= 16,
> -	.tx_fifo_sz	= 128,
> -};
> -
> -int board_usb_init(int index, enum usb_init_type init)
> -{
> -	int node;
> -	const char *mode;
> -	bool matched = false;
> -	const void *blob = gd->fdt_blob;
> -
> -	/* find the usb_otg node */
> -	node = fdt_node_offset_by_compatible(blob, -1,
> -					"snps,dwc2");
> -
> -	while (node > 0) {
> -		mode = fdt_getprop(blob, node, "dr_mode", NULL);
> -		if (mode && strcmp(mode, "otg") == 0) {
> -			matched = true;
> -			break;
> -		}
> -
> -		node = fdt_node_offset_by_compatible(blob, node,
> -					"snps,dwc2");
> -	}
> -	if (!matched) {
> -		debug("Not found usb_otg device\n");
> -		return -ENODEV;
> -	}
> -	otg_data.regs_otg = fdtdec_get_addr(blob, node, "reg");
> -
> -	return dwc2_udc_probe(&otg_data);
> -}
> -
> -int board_usb_cleanup(int index, enum usb_init_type init)
> -{
> -	return 0;
> -}
> -#endif
>