[U-Boot] [PATCH V2 47/51] tools: imx8m_image: support ddr4 firmware

[Peng Fan]

some boards use ddr4, not lpddr4, so we need to check ddr4 firmware.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 tools/imx8m_image.sh | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/tools/imx8m_image.sh b/tools/imx8m_image.sh
index 08a6a48180..603ba6e8f4 100755
--- a/tools/imx8m_image.sh
+++ b/tools/imx8m_image.sh
@@ -39,6 +39,16 @@ if [ $post_process = 1 ]; then
 		cat spl/u-boot-spl-pad.bin lpddr4_pmu_train_1d_fw.bin lpddr4_pmu_train_2d_fw.bin > spl/u-boot-spl-ddr.bin
 		rm -f lpddr4_pmu_train_1d_fw.bin lpddr4_pmu_train_2d_fw.bin lpddr4_pmu_train_1d_imem_pad.bin lpddr4_pmu_train_1d_dmem_pad.bin lpddr4_pmu_train_2d_imem_pad.bin spl/u-boot-spl-pad.bin
 	fi
+	if [ -f $srctree/ddr4_imem_1d.bin ]; then
+		objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 $srctree/ddr4_imem_1d.bin ddr4_imem_1d_pad.bin
+		objcopy -I binary -O binary --pad-to 0x4000 --gap-fill=0x0 $srctree/ddr4_dmem_1d.bin ddr4_dmem_1d_pad.bin
+		objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 $srctree/ddr4_imem_2d.bin ddr4_imem_2d_pad.bin
+		cat ddr4_imem_1d_pad.bin ddr4_dmem_1d_pad.bin > ddr4_1d_fw.bin
+		cat ddr4_imem_2d_pad.bin $srctree/ddr4_dmem_2d.bin > ddr4_2d_fw.bin
+		dd if=spl/u-boot-spl.bin of=spl/u-boot-spl-pad.bin bs=4 conv=sync
+		cat spl/u-boot-spl-pad.bin ddr4_1d_fw.bin ddr4_2d_fw.bin > spl/u-boot-spl-ddr.bin
+		rm -f ddr4_1d_fw.bin ddr4_2d_fw.bin ddr4_imem_1d_pad.bin ddr4_dmem_1d_pad.bin ddr4_imem_2d_pad.bin spl/u-boot-spl-pad.bin
+	fi
 fi
 
 exit 0
-- 
2.16.4