[U-Boot] [PATCH v2 1/2] watchdog: omap_wdt: Convert watchdog driver to use DT and DM
sunil.m at techveda.org
sunil.m at techveda.org
Wed Jul 31 16:24:06 UTC 2019
From: Suniel Mahesh <sunil.m at techveda.org>
This patch adds device tree and driver model watchdog support,
converts the legacy omap watchdog driver to driver model for
TI AM335x chipsets. The following compile warning is removed:
===================== WARNING ======================
This board does not use CONFIG_WDT (DM watchdog support).
Please update the board to use CONFIG_WDT before the
v2019.10 release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/MIGRATION.txt for more info.
====================================================
CONFIG_HW_WATCHDOG is no more a default option for AM33XX devices
after DT/DM conversion, adjusted kconfig accordingly.
DM watchdog support is enabled by default in SPL. The SPL image
doesn't fit into SRAM because of size constraints and build breaks
with an overflow. For this reason DM watchdog support should be
disabled in SPL, driver code should be adjusted accordingly to serve
this purpose.
Built and tested on AM335x device (BeagleboneBlack), compile tested
for all other AM33xx based boards.
Signed-off-by: Suniel Mahesh <sunil.m at techveda.org>
---
Changes for v2:
- changed description a bit to make more sense.
- Travis CI build is performed on am33xx, omap branches apart from others.
https://travis-ci.org/sunielmahesh/u-boot/builds/566028250?utm_medium=notification&utm_source=email"
---
arch/arm/include/asm/ti-common/omap_wdt.h | 5 ++
configs/am335x_evm_defconfig | 2 +
drivers/watchdog/Kconfig | 9 ++-
drivers/watchdog/Makefile | 1 +
drivers/watchdog/omap_wdt.c | 114 ++++++++++++++++++++++++++++++
5 files changed, 130 insertions(+), 1 deletion(-)
diff --git a/arch/arm/include/asm/ti-common/omap_wdt.h b/arch/arm/include/asm/ti-common/omap_wdt.h
index 7d72e3a..fbc421b 100644
--- a/arch/arm/include/asm/ti-common/omap_wdt.h
+++ b/arch/arm/include/asm/ti-common/omap_wdt.h
@@ -56,4 +56,9 @@ struct wd_timer {
unsigned int wdt_unfr; /* offset 0x100 */
};
+struct omap3_wdt_priv {
+ struct wd_timer *regs;
+ unsigned int wdt_trgr_pattern;
+};
+
#endif /* __OMAP_WDT_H__ */
diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig
index ff96f19..fa6b030 100644
--- a/configs/am335x_evm_defconfig
+++ b/configs/am335x_evm_defconfig
@@ -58,6 +58,8 @@ CONFIG_DM_SPI=y
CONFIG_OMAP3_SPI=y
CONFIG_TIMER=y
CONFIG_OMAP_TIMER=y
+CONFIG_WDT=y
+CONFIG_WDT_OMAP3=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_DM_USB_GADGET=y
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index ccda432..c2a63c3 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -37,7 +37,6 @@ config OMAP_WATCHDOG
bool "TI OMAP watchdog driver"
depends on ARCH_OMAP2PLUS
select HW_WATCHDOG
- default y if AM33XX
help
Say Y here to enable the OMAP3+ watchdog driver.
@@ -122,6 +121,14 @@ config WDT_MTK
The watchdog timer is stopped when initialized.
It performs full SoC reset.
+config WDT_OMAP3
+ bool "TI OMAP watchdog timer support"
+ depends on WDT && ARCH_OMAP2PLUS
+ default y if AM33XX
+ help
+ This enables OMAP3+ watchdog timer driver, which can be
+ found on some TI chipsets and inline with driver model.
+
config WDT_ORION
bool "Orion watchdog timer support"
depends on WDT
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 97aa6a8..c40667a 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_WDT_CDNS) += cdns_wdt.o
obj-$(CONFIG_WDT_MPC8xx) += mpc8xx_wdt.o
obj-$(CONFIG_WDT_MT7621) += mt7621_wdt.o
obj-$(CONFIG_WDT_MTK) += mtk_wdt.o
+obj-$(CONFIG_WDT_OMAP3) += omap_wdt.o
obj-$(CONFIG_WDT_SP805) += sp805_wdt.o
obj-$(CONFIG_WDT_STM32MP) += stm32mp_wdt.o
obj-$(CONFIG_WDT_TANGIER) += tangier_wdt.o
diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c
index 343adb0..86f7cf1 100644
--- a/drivers/watchdog/omap_wdt.c
+++ b/drivers/watchdog/omap_wdt.c
@@ -42,10 +42,14 @@
#include <asm/io.h>
#include <asm/processor.h>
#include <asm/arch/cpu.h>
+#include <wdt.h>
+#include <dm.h>
+#include <errno.h>
/* Hardware timeout in seconds */
#define WDT_HW_TIMEOUT 60
+#if !CONFIG_IS_ENABLED(WDT)
static unsigned int wdt_trgr_pattern = 0x1234;
void hw_watchdog_reset(void)
@@ -134,3 +138,113 @@ void hw_watchdog_init(void)
while ((readl(&wdt->wdtwwps)) & WDT_WWPS_PEND_WSPR)
;
}
+#else
+static int omap3_wdt_reset(struct udevice *dev)
+{
+ struct omap3_wdt_priv *priv = dev_get_priv(dev);
+
+ priv->wdt_trgr_pattern = 0x1234;
+/*
+ * Somebody just triggered watchdog reset and write to WTGR register
+ * is in progress. It is resetting right now, no need to trigger it
+ * again
+ */
+ if ((readl(&priv->regs->wdtwwps)) & WDT_WWPS_PEND_WTGR)
+ return 0;
+
+ priv->wdt_trgr_pattern = ~(priv->wdt_trgr_pattern);
+ writel(priv->wdt_trgr_pattern, &priv->regs->wdtwtgr);
+/*
+ * Don't wait for posted write to complete, i.e. don't check
+ * WDT_WWPS_PEND_WTGR bit in WWPS register. There is no writes to
+ * WTGR register outside of this func, and if entering it
+ * we see WDT_WWPS_PEND_WTGR bit set, it means watchdog reset
+ * was just triggered. This prevents us from wasting time in busy
+ * polling of WDT_WWPS_PEND_WTGR bit.
+ */
+ return 0;
+}
+
+static int omap3_wdt_stop(struct udevice *dev)
+{
+ struct omap3_wdt_priv *priv = dev_get_priv(dev);
+
+/* disable watchdog */
+ writel(0xAAAA, &priv->regs->wdtwspr);
+ while (readl(&priv->regs->wdtwwps) != 0x0)
+ ;
+ writel(0x5555, &priv->regs->wdtwspr);
+ while (readl(&priv->regs->wdtwwps) != 0x0)
+ ;
+ return 0;
+}
+
+static int omap3_wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags)
+{
+ struct omap3_wdt_priv *priv = dev_get_priv(dev);
+ u32 pre_margin = GET_WLDR_VAL(timeout_ms);
+/*
+ * Make sure the watchdog is disabled. This is unfortunately required
+ * because writing to various registers with the watchdog running has no
+ * effect.
+ */
+ omap3_wdt_stop(dev);
+
+/* initialize prescaler */
+ while (readl(&priv->regs->wdtwwps) & WDT_WWPS_PEND_WCLR)
+ ;
+
+ writel(WDT_WCLR_PRE | (PTV << WDT_WCLR_PTV_OFF), &priv->regs->wdtwclr);
+ while (readl(&priv->regs->wdtwwps) & WDT_WWPS_PEND_WCLR)
+ ;
+/* just count up at 32 KHz */
+ while (readl(&priv->regs->wdtwwps) & WDT_WWPS_PEND_WLDR)
+ ;
+
+ writel(pre_margin, &priv->regs->wdtwldr);
+ while (readl(&priv->regs->wdtwwps) & WDT_WWPS_PEND_WLDR)
+ ;
+/* Sequence to enable the watchdog */
+ writel(0xBBBB, &priv->regs->wdtwspr);
+ while ((readl(&priv->regs->wdtwwps)) & WDT_WWPS_PEND_WSPR)
+ ;
+
+ writel(0x4444, &priv->regs->wdtwspr);
+ while ((readl(&priv->regs->wdtwwps)) & WDT_WWPS_PEND_WSPR)
+ ;
+
+ return 0;
+}
+
+static int omap3_wdt_probe(struct udevice *dev)
+{
+ struct omap3_wdt_priv *priv = dev_get_priv(dev);
+
+ priv->regs = (struct wd_timer *)devfdt_get_addr(dev);
+ if (!priv->regs)
+ return -EINVAL;
+
+ debug("%s: Probing wdt%u\n", __func__, dev->seq);
+ return 0;
+}
+
+static const struct wdt_ops omap3_wdt_ops = {
+ .start = omap3_wdt_start,
+ .stop = omap3_wdt_stop,
+ .reset = omap3_wdt_reset,
+};
+
+static const struct udevice_id omap3_wdt_ids[] = {
+ { .compatible = "ti,omap3-wdt" },
+ { }
+};
+
+U_BOOT_DRIVER(omap3_wdt) = {
+ .name = "omap3_wdt",
+ .id = UCLASS_WDT,
+ .of_match = omap3_wdt_ids,
+ .ops = &omap3_wdt_ops,
+ .probe = omap3_wdt_probe,
+ .priv_auto_alloc_size = sizeof(struct omap3_wdt_priv),
+};
+#endif /* !CONFIG_IS_ENABLED(WDT) */
--
2.7.4
More information about the U-Boot
mailing list