[U-Boot] [PATCH v3 36/57] ram: rk3399: Configure soc odt support
Kever Yang
kever.yang at rock-chips.com
Tue Jul 16 13:15:41 UTC 2019
On 2019/7/16 下午7:57, Jagan Teki wrote:
> CTL 145, 146, 159, 160 registers are used to configure
> soc odt on rk3399.
>
> These soc odt values are updated from CS0_MR22_VAL and
> CS1_MR22_VAL and for lpddr4 these values ORed with
> tsel_rd_select_n.
>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> Signed-off-by: YouMin Chen <cym at rock-chips.com>
Reviewed-by: Kever Yang <Kever.yang at rock-chips.com>
Thanks,
- Kever
> ---
> drivers/ram/rockchip/sdram_rk3399.c | 49 ++++++++++++++++++++++++++++-
> 1 file changed, 48 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/ram/rockchip/sdram_rk3399.c b/drivers/ram/rockchip/sdram_rk3399.c
> index c38ea1d284..e0be9d2485 100644
> --- a/drivers/ram/rockchip/sdram_rk3399.c
> +++ b/drivers/ram/rockchip/sdram_rk3399.c
> @@ -40,6 +40,8 @@
> #define PHY_SLEWP_EN 0x1
> #define PHY_SLEWN_EN 0x1
> #define PHY_RX_CM_INPUT 0x1
> +#define CS0_MR22_VAL 0
> +#define CS1_MR22_VAL 3
>
> #define CRU_SFTRST_DDR_CTRL(ch, n) ((0x1 << (8 + 16 + (ch) * 4)) | \
> ((n) << (8 + (ch) * 4)))
> @@ -554,7 +556,7 @@ static void set_ds_odt(const struct chan_info *chan,
> const struct rk3399_sdram_params *params, u32 mr5)
> {
> u32 *denali_phy = chan->publ->denali_phy;
> -
> + u32 *denali_ctl = chan->pctl->denali_ctl;
> u32 tsel_idle_en, tsel_wr_en, tsel_rd_en;
> u32 tsel_idle_select_p, tsel_rd_select_p;
> u32 tsel_idle_select_n, tsel_rd_select_n;
> @@ -562,6 +564,7 @@ static void set_ds_odt(const struct chan_info *chan,
> u32 tsel_wr_select_dq_n, tsel_wr_select_ca_n;
> u32 tsel_ckcs_select_p, tsel_ckcs_select_n;
> struct io_setting *io = NULL;
> + u32 soc_odt = 0;
> u32 reg_value;
>
> if (params->base.dramtype == LPDDR4) {
> @@ -581,6 +584,35 @@ static void set_ds_odt(const struct chan_info *chan,
>
> tsel_ckcs_select_p = io->wr_ckcs_drv;
> tsel_ckcs_select_n = PHY_DRV_ODT_34_3;
> + switch (tsel_rd_select_n) {
> + case PHY_DRV_ODT_240:
> + soc_odt = 1;
> + break;
> + case PHY_DRV_ODT_120:
> + soc_odt = 2;
> + break;
> + case PHY_DRV_ODT_80:
> + soc_odt = 3;
> + break;
> + case PHY_DRV_ODT_60:
> + soc_odt = 4;
> + break;
> + case PHY_DRV_ODT_48:
> + soc_odt = 5;
> + break;
> + case PHY_DRV_ODT_40:
> + soc_odt = 6;
> + break;
> + case PHY_DRV_ODT_34_3:
> + soc_odt = 6;
> + printf("%s: Unable to support LPDDR4 MR22 Soc ODT\n",
> + __func__);
> + break;
> + case PHY_DRV_ODT_HI_Z:
> + default:
> + soc_odt = 0;
> + break;
> + }
> } else if (params->base.dramtype == LPDDR3) {
> tsel_rd_select_p = PHY_DRV_ODT_240;
> tsel_rd_select_n = PHY_DRV_ODT_HI_Z;
> @@ -621,6 +653,21 @@ static void set_ds_odt(const struct chan_info *chan,
> tsel_wr_en = 0;
> tsel_idle_en = 0;
>
> + /* F0_0 */
> + clrsetbits_le32(&denali_ctl[145], 0xFF << 16,
> + (soc_odt | (CS0_MR22_VAL << 3)) << 16);
> + /* F2_0, F1_0 */
> + clrsetbits_le32(&denali_ctl[146], 0xFF00FF,
> + ((soc_odt | (CS0_MR22_VAL << 3)) << 16) |
> + (soc_odt | (CS0_MR22_VAL << 3)));
> + /* F0_1 */
> + clrsetbits_le32(&denali_ctl[159], 0xFF << 16,
> + (soc_odt | (CS1_MR22_VAL << 3)) << 16);
> + /* F2_1, F1_1 */
> + clrsetbits_le32(&denali_ctl[160], 0xFF00FF,
> + ((soc_odt | (CS1_MR22_VAL << 3)) << 16) |
> + (soc_odt | (CS1_MR22_VAL << 3)));
> +
> /*
> * phy_dq_tsel_select_X 24bits DENALI_PHY_6/134/262/390 offset_0
> * sets termination values for read/idle cycles and drive strength
More information about the U-Boot
mailing list