[U-Boot] [PATCH v1] pci: add DM based mpc85xx driver
Heiko Schocher
hs at denx.de
Tue Jul 16 03:35:57 UTC 2019
add DM based PCI Configuration space access support for
MPC85xx PCI Bridge
Signed-off-by: Heiko Schocher <hs at denx.de>
---
Travis build, see:
https://travis-ci.org/hsdenx/u-boot-test/builds/558855544
MAINTAINERS | 5 ++
drivers/pci/Kconfig | 7 ++
drivers/pci/Makefile | 1 +
drivers/pci/pci_mpc85xx.c | 132 ++++++++++++++++++++++++++++++++++++++
4 files changed, 145 insertions(+)
create mode 100644 drivers/pci/pci_mpc85xx.c
diff --git a/MAINTAINERS b/MAINTAINERS
index e91684191f..01faa67a6d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -639,6 +639,11 @@ S: Maintained
F: drivers/pci_endpoint/
F: include/pci_ep.h
+PCI MPC85xx
+M: Heiko Schocher <hs at denx.de>
+S: Maintained
+F: drivers/pci/pci_mpc85xx.c
+
POWER
M: Jaehoon Chung <jh80.chung at samsung.com>
S: Maintained
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 3fe38f7315..88db0067b4 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -68,6 +68,13 @@ config PCIE_FSL
PowerPC MPC85xx, MPC86xx, B series, P series and T series SoCs.
This driver does not support SRIO_PCIE_BOOT feature.
+config PCI_MPC85XX
+ bool "MPC85XX PowerPC PCI support"
+ depends on DM_PCI
+ help
+ Say Y here if you want to enable PCI controller support on FSL
+ PowerPC MPC85xx SoC.
+
config PCI_RCAR_GEN2
bool "Renesas RCar Gen2 PCIe driver"
depends on DM_PCI
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index b5ebd50c85..929f119fb3 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_PCIE_ECAM_GENERIC) += pcie_ecam_generic.o
obj-$(CONFIG_FSL_PCI_INIT) += fsl_pci_init.o
obj-$(CONFIG_PCI_INDIRECT_BRIDGE) += pci_indirect.o
obj-$(CONFIG_PCI_GT64120) += pci_gt64120.o
+obj-$(CONFIG_PCI_MPC85XX) += pci_mpc85xx.o
obj-$(CONFIG_PCI_MSC01) += pci_msc01.o
obj-$(CONFIG_PCIE_IMX) += pcie_imx.o
obj-$(CONFIG_FTPCI100) += pci_ftpci100.o
diff --git a/drivers/pci/pci_mpc85xx.c b/drivers/pci/pci_mpc85xx.c
new file mode 100644
index 0000000000..c0d35f7f2c
--- /dev/null
+++ b/drivers/pci/pci_mpc85xx.c
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * (C) Copyright 2019
+ * Heiko Schocher, DENX Software Engineering, hs at denx.de.
+ *
+ */
+#include <common.h>
+#include <asm/cpm_85xx.h>
+#include <pci.h>
+#include <dm.h>
+
+struct mpc85xx_pci_priv {
+ void __iomem *cfg_addr;
+ void __iomem *cfg_data;
+};
+
+static int mpc85xx_pci_dm_read_config(struct udevice *dev, pci_dev_t bdf,
+ uint offset, ulong *value,
+ enum pci_size_t size)
+{
+ struct mpc85xx_pci_priv *priv = dev_get_priv(dev);
+ u32 addr;
+
+ addr = bdf | (offset & 0xfc) | ((offset & 0xf00) << 16) | 0x80000000;
+ out_be32(priv->cfg_addr, addr);
+ sync();
+ *value = pci_conv_32_to_size(in_le32(priv->cfg_data), offset, size);
+
+ return 0;
+}
+
+static int mpc85xx_pci_dm_write_config(struct udevice *dev, pci_dev_t bdf,
+ uint offset, ulong value,
+ enum pci_size_t size)
+{
+ struct mpc85xx_pci_priv *priv = dev_get_priv(dev);
+ u32 addr;
+
+ addr = bdf | (offset & 0xfc) | ((offset & 0xf00) << 16) | 0x80000000;
+ out_be32(priv->cfg_addr, addr);
+ sync();
+ out_le32(priv->cfg_data, pci_conv_size_to_32(0, value, offset, size));
+
+ return 0;
+}
+
+static int mpc85xx_pci_dm_probe(struct udevice *dev)
+{
+ struct mpc85xx_pci_priv *priv = dev_get_priv(dev);
+ struct pci_region *io;
+ struct pci_region *mem;
+ struct pci_region *pre;
+ int ret;
+ ccsr_pcix_t *pcix;
+
+ ret = pci_get_regions(dev, &io, &mem, &pre);
+ if (ret != 2) {
+ printf("%s: wrong count of regions %d only 2 allowed\n",
+ __func__, ret);
+ return -EINVAL;
+ }
+
+ pcix = priv->cfg_addr;
+ /* BAR 1: memory */
+ out_be32(&pcix->potar1, (mem->bus_start >> 12) & 0x000fffff);
+ out_be32(&pcix->potear1, 0);
+ out_be32(&pcix->powbar1, (mem->phys_start >> 12) & 0x000fffff);
+ out_be32(&pcix->powbear1, 0);
+ out_be32(&pcix->powar1, (POWAR_EN | POWAR_MEM_READ |
+ POWAR_MEM_WRITE | (__ilog2(mem->size) - 1)));
+
+ /* BAR 1: IO */
+ out_be32(&pcix->potar2, (io->bus_start >> 12) & 0x000fffff);
+ out_be32(&pcix->potear2, 0);
+ out_be32(&pcix->powbar2, (io->phys_start >> 12) & 0x000fffff);
+ out_be32(&pcix->powbear2, 0);
+ out_be32(&pcix->powar2, (POWAR_EN | POWAR_IO_READ |
+ POWAR_IO_WRITE | (__ilog2(io->size) - 1)));
+
+ out_be32(&pcix->pitar1, 0);
+ out_be32(&pcix->piwbar1, 0);
+ out_be32(&pcix->piwar1, (PIWAR_EN | PIWAR_PF | PIWAR_LOCAL |
+ PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | PIWAR_MEM_2G));
+
+ out_be32(&pcix->powar3, 0);
+ out_be32(&pcix->powar4, 0);
+ out_be32(&pcix->piwar2, 0);
+ out_be32(&pcix->piwar3, 0);
+
+ return 0;
+}
+
+static int mpc85xx_pci_dm_remove(struct udevice *dev)
+{
+ return 0;
+}
+
+static int mpc85xx_pci_ofdata_to_platdata(struct udevice *dev)
+{
+ struct mpc85xx_pci_priv *priv = dev_get_priv(dev);
+ fdt_addr_t addr;
+
+ addr = devfdt_get_addr_index(dev, 0);
+ if (addr == FDT_ADDR_T_NONE)
+ return -EINVAL;
+ priv->cfg_addr = (void __iomem *)addr;
+ addr += 4;
+ priv->cfg_data = (void __iomem *)addr;
+
+ return 0;
+}
+
+static const struct dm_pci_ops mpc85xx_pci_ops = {
+ .read_config = mpc85xx_pci_dm_read_config,
+ .write_config = mpc85xx_pci_dm_write_config,
+};
+
+static const struct udevice_id mpc85xx_pci_ids[] = {
+ { .compatible = "fsl,mpc8540-pci" },
+ { }
+};
+
+U_BOOT_DRIVER(mpc85xx_pci) = {
+ .name = "mpc85xx_pci",
+ .id = UCLASS_PCI,
+ .of_match = mpc85xx_pci_ids,
+ .ops = &mpc85xx_pci_ops,
+ .probe = mpc85xx_pci_dm_probe,
+ .remove = mpc85xx_pci_dm_remove,
+ .ofdata_to_platdata = mpc85xx_pci_ofdata_to_platdata,
+ .priv_auto_alloc_size = sizeof(struct mpc85xx_pci_priv),
+};
--
2.21.0
More information about the U-Boot
mailing list