[U-Boot] [RESEND PATCH v2 07/13] davinci: omapl138-lcdk: enable driver model for NAND

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski at baylibre.com>

Enable the driver-model on da850-lcdk. We need to add a dummy nand node
to the device tree, as the real nand node is a sub-node of the aemif
device.

On linux the aemif driver populates all its child nodes, but we can't do
it in u-boot currently.

Signed-off-by: Bartosz Golaszewski <bgolaszewski at baylibre.com>
---
 arch/arm/dts/da850-lcdk-u-boot.dtsi | 4 ++++
 configs/omapl138_lcdk_defconfig     | 1 +
 include/configs/omapl138_lcdk.h     | 4 ++++
 3 files changed, 9 insertions(+)

diff --git a/arch/arm/dts/da850-lcdk-u-boot.dtsi b/arch/arm/dts/da850-lcdk-u-boot.dtsi
index 80dda8ef58..541f4ca200 100644
--- a/arch/arm/dts/da850-lcdk-u-boot.dtsi
+++ b/arch/arm/dts/da850-lcdk-u-boot.dtsi
@@ -9,4 +9,8 @@
 	aliases {
 		i2c0 = &i2c0;
 	};
+
+	nand {
+		compatible = "ti,davinci-nand";
+	};
 };
diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig
index 7752308564..fa4ce692ff 100644
--- a/configs/omapl138_lcdk_defconfig
+++ b/configs/omapl138_lcdk_defconfig
@@ -39,6 +39,7 @@ CONFIG_DM=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_DAVINCI=y
 CONFIG_DM_MMC=y
+CONFIG_MTD=y
 CONFIG_NAND=y
 CONFIG_NAND_DAVINCI=y
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h
index db4a663c53..20fd7ff713 100644
--- a/include/configs/omapl138_lcdk.h
+++ b/include/configs/omapl138_lcdk.h
@@ -168,6 +168,10 @@
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_NAND_LOAD
+
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_SYS_NAND_SELF_INIT
+#endif
 #endif
 
 #ifdef CONFIG_SYS_USE_NOR
-- 
2.21.0