[U-Boot] [PATCH] env: ti: boot: Handle reboot reason from BCB

Sam Protsenko semen.protsenko at linaro.org
Fri Jul 12 17:35:18 UTC 2019


Superseded by v2.

On Tue, Jul 9, 2019 at 5:45 PM Sam Protsenko <semen.protsenko at linaro.org> wrote:
>
> In case of Android boot, reboot reason can be written into BCB (usually
> it's an area in 'misc' partition). U-Boot then can obtain that reboot
> reason from BCB and handle it accordingly to achieve correct Android
> boot flow, like it was suggested in [1]:
>   - if it's empty: perform normal Android boot from eMMC
>   - if it contains "bootonce-bootloader": get into fastboot mode
>   - if it contains "boot-recovery": perform recovery boot
>
> The latter is not implemented yet, as it depends on some features that
> are not implemented on TI platforms yet (in AOSP and in U-Boot).
>
> [1] https://marc.info/?l=u-boot&m=152508418909737&w=2
>
> Signed-off-by: Sam Protsenko <semen.protsenko at linaro.org>
> ---
>  include/environment/ti/boot.h | 28 ++++++++++++++++++++++++++--
>  1 file changed, 26 insertions(+), 2 deletions(-)
>
> diff --git a/include/environment/ti/boot.h b/include/environment/ti/boot.h
> index 54e9b2de4d..e37004af46 100644
> --- a/include/environment/ti/boot.h
> +++ b/include/environment/ti/boot.h
> @@ -98,6 +98,10 @@
>  #define AB_SELECT ""
>  #endif
>
> +#define FASTBOOT_CMD \
> +       "echo Booting into fastboot ...; " \
> +       "fastboot " __stringify(CONFIG_FASTBOOT_USB_DEV) "; "
> +
>  #define DEFAULT_COMMON_BOOT_TI_ARGS \
>         "console=" CONSOLEDEV ",115200n8\0" \
>         "fdtfile=undefined\0" \
> @@ -117,6 +121,27 @@
>                 "setenv mmcroot /dev/mmcblk0p2 rw; " \
>                 "run mmcboot;\0" \
>         "emmc_android_boot=" \
> +       "if bcb load " __stringify(CONFIG_FASTBOOT_FLASH_MMC_DEV) " misc; " \
> +       "then " \
> +               "if bcb test command = bootonce-bootloader; then " \
> +                       "echo BCB: Bootloader boot...; " \
> +                       "bcb clear command; bcb store; " \
> +                       FASTBOOT_CMD \
> +               "elif bcb test command = boot-recovery; then " \
> +                       "echo BCB: Recovery boot...; " \
> +                       "echo Warning: recovery boot is not implemented; " \
> +                       "echo Performing normal boot for now...; " \
> +                       "run emmc_android_normal_boot; " \
> +               "else " \
> +                       "echo BCB: Normal boot requested...; " \
> +                       "run emmc_android_normal_boot; " \
> +               "fi; " \
> +       "else " \
> +               "echo Warning: BCB is corrupted or does not exist; " \
> +               "echo Performing normal boot...; " \
> +               "run emmc_android_normal_boot; " \
> +       "fi;\0" \
> +       "emmc_android_normal_boot=" \
>                 "echo Trying to boot Android from eMMC ...; " \
>                 "run update_to_fit; " \
>                 "setenv eval_bootargs setenv bootargs $bootargs; " \
> @@ -176,8 +201,7 @@
>         "if test ${dofastboot} -eq 1; then " \
>                 "echo Boot fastboot requested, resetting dofastboot ...;" \
>                 "setenv dofastboot 0; saveenv;" \
> -               "echo Booting into fastboot ...; " \
> -               "fastboot " __stringify(CONFIG_FASTBOOT_USB_DEV) "; " \
> +               FASTBOOT_CMD \
>         "fi;" \
>         "if test ${boot_fit} -eq 1; then "      \
>                 "run update_to_fit;"    \
> --
> 2.20.1
>


More information about the U-Boot mailing list