[U-Boot] [PATCH v2 7/9] arm: ls1021atwr: Convert to use driver model TSEC driver
Vladimir Oltean
olteanv at gmail.com
Sun Jul 14 00:16:59 UTC 2019
From: Bin Meng <bmeng.cn at gmail.com>
Now that we have added driver model support to the TSEC driver,
convert ls1021atwr board to use it.
This depends on previous DM series for ls1021atwr:
http://patchwork.ozlabs.org/patch/561855/
Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
Signed-off-by: Vladimir Oltean <olteanv at gmail.com>
[Vladimir] Made the following changes:
- Added 'status = "disabled";' for all Ethernet ports in ls1021a.dtsi
- Fixed the confusion between the SGMII/TBI PCS for enet0 and enet1 -
a mistake ported over from Linux. Each SGMII PCS lies on the private
MDIO bus of the interface (and the RGMII enet2 has no SGMII PCS).
- Added CONFIG_DM_ETH to all ls1021atwr_* defconfigs
- Completely removed non-DM_ETH support from ls1021atwr
- Changed "compatible" string from "fsl,tsec-mdio" to "fsl,etsec2-mdio"
and from "fsl,tsec" to "fsl,etsec2" to match Linux
---
Changes from v1:
Applied non-reverse #ifdef logic where possible.
Removed the non-DM_ETH code from board/freescale/ls1021atwr/ and
include/configs/ls1021atwr.h.
Aligned compatible strings to Linux.
arch/arm/cpu/armv7/ls102xa/cpu.c | 2 +-
arch/arm/cpu/armv7/ls102xa/fdt.c | 10 +++++
arch/arm/dts/ls1021a-twr.dtsi | 32 ++++++++++++++++
arch/arm/dts/ls1021a.dtsi | 30 +++++++++++++--
board/freescale/ls1021atwr/ls1021atwr.c | 38 -------------------
configs/ls1021atwr_nor_SECURE_BOOT_defconfig | 2 +
configs/ls1021atwr_nor_defconfig | 2 +
configs/ls1021atwr_nor_lpuart_defconfig | 2 +
configs/ls1021atwr_qspi_defconfig | 2 +
...s1021atwr_sdcard_ifc_SECURE_BOOT_defconfig | 2 +
configs/ls1021atwr_sdcard_ifc_defconfig | 2 +
configs/ls1021atwr_sdcard_qspi_defconfig | 2 +
include/configs/ls1021atwr.h | 28 +-------------
13 files changed, 85 insertions(+), 69 deletions(-)
diff --git a/arch/arm/cpu/armv7/ls102xa/cpu.c b/arch/arm/cpu/armv7/ls102xa/cpu.c
index ecf9e869855e..9ccfe1042ce5 100644
--- a/arch/arm/cpu/armv7/ls102xa/cpu.c
+++ b/arch/arm/cpu/armv7/ls102xa/cpu.c
@@ -296,7 +296,7 @@ int cpu_mmc_init(bd_t *bis)
int cpu_eth_init(bd_t *bis)
{
-#ifdef CONFIG_TSEC_ENET
+#if defined(CONFIG_TSEC_ENET) && !defined(CONFIG_DM_ETH)
tsec_standard_init(bis);
#endif
diff --git a/arch/arm/cpu/armv7/ls102xa/fdt.c b/arch/arm/cpu/armv7/ls102xa/fdt.c
index 8bf9c42b2260..1aadffff5991 100644
--- a/arch/arm/cpu/armv7/ls102xa/fdt.c
+++ b/arch/arm/cpu/armv7/ls102xa/fdt.c
@@ -16,12 +16,17 @@
#include <tsec.h>
#include <asm/arch/immap_ls102xa.h>
#include <fsl_sec.h>
+#include <dm.h>
DECLARE_GLOBAL_DATA_PTR;
void ft_fixup_enet_phy_connect_type(void *fdt)
{
+#ifdef CONFIG_DM_ETH
+ struct udevice *dev;
+#else
struct eth_device *dev;
+#endif
struct tsec_private *priv;
const char *enet_path, *phy_path;
char enet[16];
@@ -29,7 +34,12 @@ void ft_fixup_enet_phy_connect_type(void *fdt)
int phy_node;
int i = 0;
uint32_t ph;
+#ifdef CONFIG_DM_ETH
+ char *name[3] = { "ethernet at 2d10000", "ethernet at 2d50000",
+ "ethernet at 2d90000" };
+#else
char *name[3] = { "eTSEC1", "eTSEC2", "eTSEC3" };
+#endif
for (; i < ARRAY_SIZE(name); i++) {
dev = eth_get_dev_by_name(name[i]);
diff --git a/arch/arm/dts/ls1021a-twr.dtsi b/arch/arm/dts/ls1021a-twr.dtsi
index 5d3275ced913..27c96f95400a 100644
--- a/arch/arm/dts/ls1021a-twr.dtsi
+++ b/arch/arm/dts/ls1021a-twr.dtsi
@@ -51,6 +51,26 @@
};
};
+&enet0 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&sgmii_phy2>;
+ phy-connection-type = "sgmii";
+ status = "okay";
+};
+
+&enet1 {
+ tbi-handle = <&tbi1>;
+ phy-handle = <&sgmii_phy0>;
+ phy-connection-type = "sgmii";
+ status = "okay";
+};
+
+&enet2 {
+ phy-handle = <&rgmii_phy1>;
+ phy-connection-type = "rgmii-id";
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
};
@@ -84,12 +104,24 @@
sgmii_phy0: ethernet-phy at 0 {
reg = <0x0>;
};
+
rgmii_phy1: ethernet-phy at 1 {
reg = <0x1>;
};
+
sgmii_phy2: ethernet-phy at 2 {
reg = <0x2>;
};
+
+ /* SGMII PCS for enet0 */
+ tbi0: tbi-phy at 1f {
+ reg = <0x1f>;
+ device_type = "tbi-phy";
+ };
+};
+
+&mdio1 {
+ /* SGMII PCS for enet1 */
tbi1: tbi-phy at 1f {
reg = <0x1f>;
device_type = "tbi-phy";
diff --git a/arch/arm/dts/ls1021a.dtsi b/arch/arm/dts/ls1021a.dtsi
index 7fb24ab68787..e419d9c44fcb 100644
--- a/arch/arm/dts/ls1021a.dtsi
+++ b/arch/arm/dts/ls1021a.dtsi
@@ -350,12 +350,36 @@
<&platform_clk 1>;
};
+ enet0: ethernet at 2d10000 {
+ compatible = "fsl,etsec2";
+ reg = <0x2d10000 0x1000>;
+ status = "disabled";
+ };
+
+ enet1: ethernet at 2d50000 {
+ compatible = "fsl,etsec2";
+ reg = <0x2d50000 0x1000>;
+ status = "disabled";
+ };
+
+ enet2: ethernet at 2d90000 {
+ compatible = "fsl,etsec2";
+ reg = <0x2d90000 0x1000>;
+ status = "disabled";
+ };
+
mdio0: mdio at 2d24000 {
- compatible = "gianfar";
- device_type = "mdio";
+ compatible = "fsl,etsec2-mdio";
+ reg = <0x2d24000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mdio1: mdio at 2d64000 {
+ compatible = "fsl,etsec2-mdio";
+ reg = <0x2d64000 0x4000>;
#address-cells = <1>;
#size-cells = <0>;
- reg = <0x2d24000 0x4000>;
};
usb at 8600000 {
diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c
index 01ba1bc96213..fcf2ec97889d 100644
--- a/board/freescale/ls1021atwr/ls1021atwr.c
+++ b/board/freescale/ls1021atwr/ls1021atwr.c
@@ -248,44 +248,6 @@ int board_mmc_init(bd_t *bis)
int board_eth_init(bd_t *bis)
{
-#ifdef CONFIG_TSEC_ENET
- struct fsl_pq_mdio_info mdio_info;
- struct tsec_info_struct tsec_info[4];
- int num = 0;
-
-#ifdef CONFIG_TSEC1
- SET_STD_TSEC_INFO(tsec_info[num], 1);
- if (is_serdes_configured(SGMII_TSEC1)) {
- puts("eTSEC1 is in sgmii mode.\n");
- tsec_info[num].flags |= TSEC_SGMII;
- }
- num++;
-#endif
-#ifdef CONFIG_TSEC2
- SET_STD_TSEC_INFO(tsec_info[num], 2);
- if (is_serdes_configured(SGMII_TSEC2)) {
- puts("eTSEC2 is in sgmii mode.\n");
- tsec_info[num].flags |= TSEC_SGMII;
- }
- num++;
-#endif
-#ifdef CONFIG_TSEC3
- SET_STD_TSEC_INFO(tsec_info[num], 3);
- tsec_info[num].interface = PHY_INTERFACE_MODE_RGMII_ID;
- num++;
-#endif
- if (!num) {
- printf("No TSECs initialized\n");
- return 0;
- }
-
- mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
- mdio_info.name = DEFAULT_MII_NAME;
- fsl_pq_mdio_init(bis, &mdio_info);
-
- tsec_eth_init(bis, tsec_info, num);
-#endif
-
return pci_eth_init(bis);
}
diff --git a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
index 6c4bb9aaf665..830affc925b5 100644
--- a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
+++ b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
@@ -40,7 +40,9 @@ CONFIG_SYS_FLASH_CFI=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
CONFIG_MII=y
+CONFIG_DM_ETH=y
CONFIG_TSEC_ENET=y
+CONFIG_PHY_ATHEROS=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
diff --git a/configs/ls1021atwr_nor_defconfig b/configs/ls1021atwr_nor_defconfig
index 9d8c2024c04e..c4d18c6f6907 100644
--- a/configs/ls1021atwr_nor_defconfig
+++ b/configs/ls1021atwr_nor_defconfig
@@ -40,7 +40,9 @@ CONFIG_SYS_FLASH_CFI=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
CONFIG_MII=y
+CONFIG_DM_ETH=y
CONFIG_TSEC_ENET=y
+CONFIG_PHY_ATHEROS=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
diff --git a/configs/ls1021atwr_nor_lpuart_defconfig b/configs/ls1021atwr_nor_lpuart_defconfig
index b9cfdb6fd69e..b74d58a3487c 100644
--- a/configs/ls1021atwr_nor_lpuart_defconfig
+++ b/configs/ls1021atwr_nor_lpuart_defconfig
@@ -42,7 +42,9 @@ CONFIG_SYS_FLASH_CFI=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
CONFIG_MII=y
+CONFIG_DM_ETH=y
CONFIG_TSEC_ENET=y
+CONFIG_PHY_ATHEROS=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
diff --git a/configs/ls1021atwr_qspi_defconfig b/configs/ls1021atwr_qspi_defconfig
index 8c27c5908cb5..911061a37881 100644
--- a/configs/ls1021atwr_qspi_defconfig
+++ b/configs/ls1021atwr_qspi_defconfig
@@ -42,7 +42,9 @@ CONFIG_SPI_FLASH_STMICRO=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
CONFIG_MII=y
+CONFIG_DM_ETH=y
CONFIG_TSEC_ENET=y
+CONFIG_PHY_ATHEROS=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
diff --git a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
index 979878d560f4..d8c26393cead 100644
--- a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
+++ b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
@@ -53,7 +53,9 @@ CONFIG_SYS_FLASH_CFI=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
CONFIG_MII=y
+CONFIG_DM_ETH=y
CONFIG_TSEC_ENET=y
+CONFIG_PHY_ATHEROS=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
diff --git a/configs/ls1021atwr_sdcard_ifc_defconfig b/configs/ls1021atwr_sdcard_ifc_defconfig
index 59af172cb8a1..d23c87504c9b 100644
--- a/configs/ls1021atwr_sdcard_ifc_defconfig
+++ b/configs/ls1021atwr_sdcard_ifc_defconfig
@@ -54,7 +54,9 @@ CONFIG_SYS_FLASH_CFI=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
CONFIG_MII=y
+CONFIG_DM_ETH=y
CONFIG_TSEC_ENET=y
+CONFIG_PHY_ATHEROS=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
diff --git a/configs/ls1021atwr_sdcard_qspi_defconfig b/configs/ls1021atwr_sdcard_qspi_defconfig
index d7fec5e365eb..7b2c2900a060 100644
--- a/configs/ls1021atwr_sdcard_qspi_defconfig
+++ b/configs/ls1021atwr_sdcard_qspi_defconfig
@@ -53,7 +53,9 @@ CONFIG_SPI_FLASH_STMICRO=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
CONFIG_MII=y
+CONFIG_DM_ETH=y
CONFIG_TSEC_ENET=y
+CONFIG_PHY_ATHEROS=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index de0c9c7f26af..cbf7a496a564 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -260,33 +260,7 @@
*/
#ifdef CONFIG_TSEC_ENET
-#define CONFIG_MII_DEFAULT_TSEC 1
-#define CONFIG_TSEC1 1
-#define CONFIG_TSEC1_NAME "eTSEC1"
-#define CONFIG_TSEC2 1
-#define CONFIG_TSEC2_NAME "eTSEC2"
-#define CONFIG_TSEC3 1
-#define CONFIG_TSEC3_NAME "eTSEC3"
-
-#define TSEC1_PHY_ADDR 2
-#define TSEC2_PHY_ADDR 0
-#define TSEC3_PHY_ADDR 1
-
-#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
-
-#define TSEC1_PHYIDX 0
-#define TSEC2_PHYIDX 0
-#define TSEC3_PHYIDX 0
-
-#define CONFIG_ETHPRIME "eTSEC1"
-
-#define CONFIG_PHY_ATHEROS
-
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#define CONFIG_HAS_ETH2
+#define CONFIG_ETHPRIME "ethernet at 2d10000"
#endif
/* PCIe */
--
2.17.1
More information about the U-Boot
mailing list