[U-Boot] [PATCH v2 08/16] stm32mp1: update device tree with ETZPC status

[Patrick DELAUNAY]

Hi,

> From: Patrick DELAUNAY <patrick.delaunay at st.com>
> Sent: vendredi 5 juillet 2019 17:20
> 
> U-Boot should disable nodes in device tree if needed according ETZPC status in
> ft_system_setup().
> 
> ETZPC itself use an array on addresses to do the match between the status bits
> and the node.
> 
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard at st.com>
> Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
> ---
> 
> Changes in v2: None
> 
>  arch/arm/mach-stm32mp/Kconfig |   7 ++
>  arch/arm/mach-stm32mp/fdt.c   | 178
> ++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 185 insertions(+)
> 

Applied to u-boot-stm32/master, thanks!

Patrick