[U-Boot] [PATCH v3 0/9] NXP LS1021A-TSN Board

[Vladimir Oltean]

Hi Joe,

On Tue, 23 Jul 2019 at 03:15, Joe Hershberger <joe.hershberger at ni.com> wrote:
>
> On Thu, Jul 18, 2019 at 4:33 PM Vladimir Oltean <olteanv at gmail.com> wrote:
> >
> > This patchset adds initial support for the NXP LS1021A-TSN board,
> > an evaluation platform built in partnership with VVDN/Argonboards
> > for some IEEE 802.1 TSN features.
> >
> > It features a cleaned-up U-Boot board support taken from OpenIL,
> > as well as an eTSEC migration to DM_ETH.  I picked up Bin Meng's
> > patch that converts the LS1021A-TWR (different board, same SoC):
> > https://lists.denx.de/pipermail/u-boot/2018-May/330096.html
> > verified it on the LS1021A-TSN board I am submitting, and made a
> > few adjustments where necessary.
> >
> > TODO items:
> > - Make the eTSEC driver support fixed-link interfaces (necessary
> >   for the enet2 <-> sja1105 internal port)
> > - Add driver for SJA1105 switch
> > - Potentially migrate the eTSEC MDIO bus driver to DM_MDIO and
> >   expose the TBI PHY to mdio commands (useful for debugging),
> >   once https://lists.denx.de/pipermail/u-boot/2019-June/371563.html
> >   is merged.
>
> This series is merged at this point... are you wanting to do that
> migration now or do it sometime later?
>

I think I would rather have these 9 patches merged first, now that
they got reviewed, instead of reworking them again.

> >
> > Bin Meng (1):
> >   arm: ls1021atwr: Convert to use driver model TSEC driver
> >
> > Jianchao Wang (1):
> >   Add support for the NXP LS1021A-TSN board
> >
> > Vladimir Oltean (7):
> >   net: tsec: Refactor the readout of the tbi-handle property
> >   net: tsec: Fix offset of MDIO registers for DM_ETH
> >   net: tsec: Reverse Christmas tree notation
> >   net: tsec: Make errors visible
> >   net: tsec: Common handling of MAC station address for DM_ETH
> >   net: tsec: Change compatible strings to match Linux
> >   configs: ls1021atwr: Fix distro_bootcmd for QSPI boot
> >
> >  arch/arm/Kconfig                              |  14 +
> >  arch/arm/cpu/armv7/ls102xa/cpu.c              |   2 +-
> >  arch/arm/cpu/armv7/ls102xa/fdt.c              |  10 +
> >  arch/arm/dts/Makefile                         |   2 +-
> >  arch/arm/dts/ls1021a-tsn.dts                  |  77 ++++++
> >  arch/arm/dts/ls1021a-twr.dtsi                 |  32 +++
> >  arch/arm/dts/ls1021a.dtsi                     |  30 +-
> >  board/freescale/ls1021atsn/Kconfig            |  18 ++
> >  board/freescale/ls1021atsn/MAINTAINERS        |   8 +
> >  board/freescale/ls1021atsn/Makefile           |   3 +
> >  board/freescale/ls1021atsn/README.rst         |  97 +++++++
> >  board/freescale/ls1021atsn/ls1021atsn.c       | 260 ++++++++++++++++++
> >  board/freescale/ls1021atsn/ls102xa_pbi.cfg    |  15 +
> >  board/freescale/ls1021atsn/ls102xa_rcw_sd.cfg |   8 +
> >  board/freescale/ls1021atwr/ls1021atwr.c       |  38 ---
> >  configs/ls1021atsn_qspi_defconfig             |  79 ++++++
> >  configs/ls1021atsn_sdcard_defconfig           |  91 ++++++
> >  configs/ls1021atwr_nor_SECURE_BOOT_defconfig  |   2 +
> >  configs/ls1021atwr_nor_defconfig              |   2 +
> >  configs/ls1021atwr_nor_lpuart_defconfig       |   2 +
> >  configs/ls1021atwr_qspi_defconfig             |   2 +
> >  ...s1021atwr_sdcard_ifc_SECURE_BOOT_defconfig |   2 +
> >  configs/ls1021atwr_sdcard_ifc_defconfig       |   2 +
> >  configs/ls1021atwr_sdcard_qspi_defconfig      |   2 +
> >  doc/device-tree-bindings/net/fsl-tsec-phy.txt |   4 +-
> >  drivers/net/tsec.c                            |  59 ++--
> >  include/configs/ls1021atsn.h                  | 250 +++++++++++++++++
> >  include/configs/ls1021atwr.h                  |  30 +-
> >  include/tsec.h                                |   4 +-
> >  29 files changed, 1038 insertions(+), 107 deletions(-)
> >  create mode 100644 arch/arm/dts/ls1021a-tsn.dts
> >  create mode 100644 board/freescale/ls1021atsn/Kconfig
> >  create mode 100644 board/freescale/ls1021atsn/MAINTAINERS
> >  create mode 100644 board/freescale/ls1021atsn/Makefile
> >  create mode 100644 board/freescale/ls1021atsn/README.rst
> >  create mode 100644 board/freescale/ls1021atsn/ls1021atsn.c
> >  create mode 100644 board/freescale/ls1021atsn/ls102xa_pbi.cfg
> >  create mode 100644 board/freescale/ls1021atsn/ls102xa_rcw_sd.cfg
> >  create mode 100644 configs/ls1021atsn_qspi_defconfig
> >  create mode 100644 configs/ls1021atsn_sdcard_defconfig
> >  create mode 100644 include/configs/ls1021atsn.h
> >
> > --
> > 2.17.1
> >
> > _______________________________________________
> > U-Boot mailing list
> > U-Boot at lists.denx.de
> > https://lists.denx.de/listinfo/u-boot

Regards,
-Vladimir