[U-Boot] [PATCH v1] colibri_imx7: provide proper node name to pmic_get

[Igor Opaniuk]

From: Igor Opaniuk <igor.opaniuk at toradex.com>

Implementation of pmic_get() uses uclass_find_device_by_name(), which
behaviour was changed in 4213609cc7
("drivers: core: use strcmp when find device by name"). Now we have to
supply full node name with unit address.

Fixes boot issue:
U-Boot 2019.07-00788-g0ef6e69a1e-dirty (Jul 19 2019 - 15:27:02 +0300)

CPU:   Freescale i.MX7D rev1.3 1000 MHz (running at 792 MHz)
CPU:   Extended Commercial temperature grade (-20C to 105C) at 41C
Reset cause: POR
DRAM:  512 MiB
initcall sequence 9ffd3a4c failed at call 87803c61 (err=-19)
ERROR Please RESET the board

Fixes: 4213609cc7("drivers: core: use strcmp when find device by name")
Signed-off-by: Igor Opaniuk <igor.opaniuk at toradex.com>
---

 board/toradex/colibri_imx7/colibri_imx7.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/board/toradex/colibri_imx7/colibri_imx7.c b/board/toradex/colibri_imx7/colibri_imx7.c
index 0eb83474c4..c001316591 100644
--- a/board/toradex/colibri_imx7/colibri_imx7.c
+++ b/board/toradex/colibri_imx7/colibri_imx7.c
@@ -274,7 +274,7 @@ int power_init_board(void)
 	int ret;
 
 
-	ret = pmic_get("rn5t567", &dev);
+	ret = pmic_get("rn5t567 at 33", &dev);
 	if (ret)
 		return ret;
 	ver = pmic_reg_read(dev, RN5T567_LSIVER);
@@ -308,7 +308,7 @@ void reset_cpu(ulong addr)
 {
 	struct udevice *dev;
 
-	pmic_get("rn5t567", &dev);
+	pmic_get("rn5t567 at 33", &dev);
 
 	/* Use PMIC to reset, set REPWRTIM to 0 and REPWRON to 1 */
 	pmic_reg_write(dev, RN5T567_REPCNT, 0x1);
-- 
2.17.1