[U-Boot] [PATCH v6 1/3] common: Move bootm_decomp_image() to image.c (as image_decomp())

Julius Werner jwerner at chromium.org
Thu Jul 25 02:37:54 UTC 2019


Upcoming patches want to add decompression to use cases that are no
longer directly related to booting. It makes sense to retain a single
decompression routine, but it should no longer be in bootm.c (which is
not compiled for all configurations). This patch moves
bootm_decomp_image() to image.c and renames it to image_decomp() in
preparation of those upcoming patches.

Signed-off-by: Julius Werner <jwerner at chromium.org>
---
 - First version: v5
 - Changes for v6
   - Fixed test_fit.py (had a printf() without a newline)

 common/bootm.c     | 148 ++++++---------------------------------------
 common/image.c     | 111 ++++++++++++++++++++++++++++++++++
 include/bootm.h    |  17 ------
 include/image.h    |  17 ++++++
 test/compression.c |  24 ++++----
 5 files changed, 160 insertions(+), 157 deletions(-)

diff --git a/common/bootm.c b/common/bootm.c
index bea516025f..5509b341ff 100644
--- a/common/bootm.c
+++ b/common/bootm.c
@@ -7,17 +7,12 @@
 #ifndef USE_HOSTCC
 #include <common.h>
 #include <bootstage.h>
-#include <bzlib.h>
 #include <errno.h>
 #include <fdt_support.h>
 #include <lmb.h>
 #include <malloc.h>
 #include <mapmem.h>
 #include <asm/io.h>
-#include <linux/lzo.h>
-#include <lzma/LzmaTypes.h>
-#include <lzma/LzmaDec.h>
-#include <lzma/LzmaTools.h>
 #if defined(CONFIG_CMD_USB)
 #include <usb.h>
 #endif
@@ -299,23 +294,6 @@ static int bootm_find_other(cmd_tbl_t *cmdtp, int flag, int argc,
 }
 #endif /* USE_HOSTC */
 
-/**
- * print_decomp_msg() - Print a suitable decompression/loading message
- *
- * @type:	OS type (IH_OS_...)
- * @comp_type:	Compression type being used (IH_COMP_...)
- * @is_xip:	true if the load address matches the image start
- */
-static void print_decomp_msg(int comp_type, int type, bool is_xip)
-{
-	const char *name = genimg_get_type_name(type);
-
-	if (comp_type == IH_COMP_NONE)
-		printf("   %s %s ... ", is_xip ? "XIP" : "Loading", name);
-	else
-		printf("   Uncompressing %s ... ", name);
-}
-
 /**
  * handle_decomp_error() - display a decompression error
  *
@@ -325,16 +303,18 @@ static void print_decomp_msg(int comp_type, int type, bool is_xip)
  *
  * @comp_type:		Compression type being used (IH_COMP_...)
  * @uncomp_size:	Number of bytes uncompressed
- * @unc_len:		Amount of space available for decompression
- * @ret:		Error code to report
- * @return BOOTM_ERR_RESET, indicating that the board must be reset
+ * @ret:		errno error code received from compression library
+ * @return Appropriate BOOTM_ERR_ error code
  */
-static int handle_decomp_error(int comp_type, size_t uncomp_size,
-			       size_t unc_len, int ret)
+static int handle_decomp_error(int comp_type, size_t uncomp_size, int ret)
 {
 	const char *name = genimg_get_comp_name(comp_type);
 
-	if (uncomp_size >= unc_len)
+	/* ENOSYS means unimplemented compression type, don't reset. */
+	if (ret == -ENOSYS)
+		return BOOTM_ERR_UNIMPLEMENTED;
+
+	if (uncomp_size >= CONFIG_SYS_BOOTM_LEN)
 		printf("Image too large: increase CONFIG_SYS_BOOTM_LEN\n");
 	else
 		printf("%s: uncompress error %d\n", name, ret);
@@ -352,93 +332,6 @@ static int handle_decomp_error(int comp_type, size_t uncomp_size,
 	return BOOTM_ERR_RESET;
 }
 
-int bootm_decomp_image(int comp, ulong load, ulong image_start, int type,
-		       void *load_buf, void *image_buf, ulong image_len,
-		       uint unc_len, ulong *load_end)
-{
-	int ret = 0;
-
-	*load_end = load;
-	print_decomp_msg(comp, type, load == image_start);
-
-	/*
-	 * Load the image to the right place, decompressing if needed. After
-	 * this, image_len will be set to the number of uncompressed bytes
-	 * loaded, ret will be non-zero on error.
-	 */
-	switch (comp) {
-	case IH_COMP_NONE:
-		if (load == image_start)
-			break;
-		if (image_len <= unc_len)
-			memmove_wd(load_buf, image_buf, image_len, CHUNKSZ);
-		else
-			ret = 1;
-		break;
-#ifdef CONFIG_GZIP
-	case IH_COMP_GZIP: {
-		ret = gunzip(load_buf, unc_len, image_buf, &image_len);
-		break;
-	}
-#endif /* CONFIG_GZIP */
-#ifdef CONFIG_BZIP2
-	case IH_COMP_BZIP2: {
-		uint size = unc_len;
-
-		/*
-		 * If we've got less than 4 MB of malloc() space,
-		 * use slower decompression algorithm which requires
-		 * at most 2300 KB of memory.
-		 */
-		ret = BZ2_bzBuffToBuffDecompress(load_buf, &size,
-			image_buf, image_len,
-			CONFIG_SYS_MALLOC_LEN < (4096 * 1024), 0);
-		image_len = size;
-		break;
-	}
-#endif /* CONFIG_BZIP2 */
-#ifdef CONFIG_LZMA
-	case IH_COMP_LZMA: {
-		SizeT lzma_len = unc_len;
-
-		ret = lzmaBuffToBuffDecompress(load_buf, &lzma_len,
-					       image_buf, image_len);
-		image_len = lzma_len;
-		break;
-	}
-#endif /* CONFIG_LZMA */
-#ifdef CONFIG_LZO
-	case IH_COMP_LZO: {
-		size_t size = unc_len;
-
-		ret = lzop_decompress(image_buf, image_len, load_buf, &size);
-		image_len = size;
-		break;
-	}
-#endif /* CONFIG_LZO */
-#ifdef CONFIG_LZ4
-	case IH_COMP_LZ4: {
-		size_t size = unc_len;
-
-		ret = ulz4fn(image_buf, image_len, load_buf, &size);
-		image_len = size;
-		break;
-	}
-#endif /* CONFIG_LZ4 */
-	default:
-		printf("Unimplemented compression type %d\n", comp);
-		return BOOTM_ERR_UNIMPLEMENTED;
-	}
-
-	if (ret)
-		return handle_decomp_error(comp, image_len, unc_len, ret);
-	*load_end = load + image_len;
-
-	puts("OK\n");
-
-	return 0;
-}
-
 #ifndef USE_HOSTCC
 static int bootm_load_os(bootm_headers_t *images, int boot_progress)
 {
@@ -456,10 +349,11 @@ static int bootm_load_os(bootm_headers_t *images, int boot_progress)
 
 	load_buf = map_sysmem(load, 0);
 	image_buf = map_sysmem(os.image_start, image_len);
-	err = bootm_decomp_image(os.comp, load, os.image_start, os.type,
-				 load_buf, image_buf, image_len,
-				 CONFIG_SYS_BOOTM_LEN, &load_end);
+	err = image_decomp(os.comp, load, os.image_start, os.type,
+			   load_buf, image_buf, image_len,
+			   CONFIG_SYS_BOOTM_LEN, &load_end);
 	if (err) {
+		err = handle_decomp_error(os.comp, load_end - load, err);
 		bootstage_error(BOOTSTAGE_ID_DECOMP_IMAGE);
 		return err;
 	}
@@ -919,11 +813,6 @@ void __weak switch_to_non_secure_mode(void)
 
 #else /* USE_HOSTCC */
 
-void memmove_wd(void *to, void *from, size_t len, ulong chunksz)
-{
-	memmove(to, from, len);
-}
-
 #if defined(CONFIG_FIT_SIGNATURE)
 static int bootm_host_load_image(const void *fit, int req_image_type)
 {
@@ -957,13 +846,16 @@ static int bootm_host_load_image(const void *fit, int req_image_type)
 
 	/* Allow the image to expand by a factor of 4, should be safe */
 	load_buf = malloc((1 << 20) + len * 4);
-	ret = bootm_decomp_image(imape_comp, 0, data, image_type, load_buf,
-				 (void *)data, len, CONFIG_SYS_BOOTM_LEN,
-				 &load_end);
+	ret = image_decomp(imape_comp, 0, data, image_type, load_buf,
+			   (void *)data, len, CONFIG_SYS_BOOTM_LEN,
+			   &load_end);
 	free(load_buf);
 
-	if (ret && ret != BOOTM_ERR_UNIMPLEMENTED)
-		return ret;
+	if (ret) {
+		ret = handle_decomp_error(imape_comp, load_end - 0, ret);
+		if (ret != BOOTM_ERR_UNIMPLEMENTED)
+			return ret;
+	}
 
 	return 0;
 }
diff --git a/common/image.c b/common/image.c
index 9f9538fac2..495883185d 100644
--- a/common/image.c
+++ b/common/image.c
@@ -32,6 +32,12 @@
 #include <linux/errno.h>
 #include <asm/io.h>
 
+#include <bzlib.h>
+#include <linux/lzo.h>
+#include <lzma/LzmaTypes.h>
+#include <lzma/LzmaDec.h>
+#include <lzma/LzmaTools.h>
+
 #ifdef CONFIG_CMD_BDI
 extern int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
 #endif
@@ -375,6 +381,106 @@ void image_print_contents(const void *ptr)
 	}
 }
 
+/**
+ * print_decomp_msg() - Print a suitable decompression/loading message
+ *
+ * @type:	OS type (IH_OS_...)
+ * @comp_type:	Compression type being used (IH_COMP_...)
+ * @is_xip:	true if the load address matches the image start
+ */
+static void print_decomp_msg(int comp_type, int type, bool is_xip)
+{
+	const char *name = genimg_get_type_name(type);
+
+	if (comp_type == IH_COMP_NONE)
+		printf("   %s %s\n", is_xip ? "XIP" : "Loading", name);
+	else
+		printf("   Uncompressing %s\n", name);
+}
+
+int image_decomp(int comp, ulong load, ulong image_start, int type,
+		 void *load_buf, void *image_buf, ulong image_len,
+		 uint unc_len, ulong *load_end)
+{
+	int ret = 0;
+
+	*load_end = load;
+	print_decomp_msg(comp, type, load == image_start);
+
+	/*
+	 * Load the image to the right place, decompressing if needed. After
+	 * this, image_len will be set to the number of uncompressed bytes
+	 * loaded, ret will be non-zero on error.
+	 */
+	switch (comp) {
+	case IH_COMP_NONE:
+		if (load == image_start)
+			break;
+		if (image_len <= unc_len)
+			memmove_wd(load_buf, image_buf, image_len, CHUNKSZ);
+		else
+			ret = -ENOSPC;
+		break;
+#ifdef CONFIG_GZIP
+	case IH_COMP_GZIP: {
+		ret = gunzip(load_buf, unc_len, image_buf, &image_len);
+		break;
+	}
+#endif /* CONFIG_GZIP */
+#ifdef CONFIG_BZIP2
+	case IH_COMP_BZIP2: {
+		uint size = unc_len;
+
+		/*
+		 * If we've got less than 4 MB of malloc() space,
+		 * use slower decompression algorithm which requires
+		 * at most 2300 KB of memory.
+		 */
+		ret = BZ2_bzBuffToBuffDecompress(load_buf, &size,
+			image_buf, image_len,
+			CONFIG_SYS_MALLOC_LEN < (4096 * 1024), 0);
+		image_len = size;
+		break;
+	}
+#endif /* CONFIG_BZIP2 */
+#ifdef CONFIG_LZMA
+	case IH_COMP_LZMA: {
+		SizeT lzma_len = unc_len;
+
+		ret = lzmaBuffToBuffDecompress(load_buf, &lzma_len,
+					       image_buf, image_len);
+		image_len = lzma_len;
+		break;
+	}
+#endif /* CONFIG_LZMA */
+#ifdef CONFIG_LZO
+	case IH_COMP_LZO: {
+		size_t size = unc_len;
+
+		ret = lzop_decompress(image_buf, image_len, load_buf, &size);
+		image_len = size;
+		break;
+	}
+#endif /* CONFIG_LZO */
+#ifdef CONFIG_LZ4
+	case IH_COMP_LZ4: {
+		size_t size = unc_len;
+
+		ret = ulz4fn(image_buf, image_len, load_buf, &size);
+		image_len = size;
+		break;
+	}
+#endif /* CONFIG_LZ4 */
+	default:
+		printf("Unimplemented compression type %d\n", comp);
+		return -ENOSYS;
+	}
+
+	*load_end = load + image_len;
+
+	return ret;
+}
+
 
 #ifndef USE_HOSTCC
 #if CONFIG_IS_ENABLED(LEGACY_IMAGE_FORMAT)
@@ -551,6 +657,11 @@ void memmove_wd(void *to, void *from, size_t len, ulong chunksz)
 	memmove(to, from, len);
 #endif	/* CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG */
 }
+#else	/* USE_HOSTCC */
+void memmove_wd(void *to, void *from, size_t len, ulong chunksz)
+{
+	memmove(to, from, len);
+}
 #endif /* !USE_HOSTCC */
 
 void genimg_print_size(uint32_t size)
diff --git a/include/bootm.h b/include/bootm.h
index f771b733f5..edeeacb0df 100644
--- a/include/bootm.h
+++ b/include/bootm.h
@@ -59,23 +59,6 @@ int do_bootm_states(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
 
 void arch_preboot_os(void);
 
-/**
- * bootm_decomp_image() - decompress the operating system
- *
- * @comp:	Compression algorithm that is used (IH_COMP_...)
- * @load:	Destination load address in U-Boot memory
- * @image_start Image start address (where we are decompressing from)
- * @type:	OS type (IH_OS_...)
- * @load_bug:	Place to decompress to
- * @image_buf:	Address to decompress from
- * @image_len:	Number of bytes in @image_buf to decompress
- * @unc_len:	Available space for decompression
- * @return 0 if OK, -ve on error (BOOTM_ERR_...)
- */
-int bootm_decomp_image(int comp, ulong load, ulong image_start, int type,
-		       void *load_buf, void *image_buf, ulong image_len,
-		       uint unc_len, ulong *load_end);
-
 /*
  * boards should define this to disable devices when EFI exits from boot
  * services.
diff --git a/include/image.h b/include/image.h
index 5f82194951..27d7cb9d1e 100644
--- a/include/image.h
+++ b/include/image.h
@@ -849,6 +849,23 @@ static inline int image_check_target_arch(const image_header_t *hdr)
 }
 #endif /* USE_HOSTCC */
 
+/**
+ * image_decomp() - decompress an image
+ *
+ * @comp:	Compression algorithm that is used (IH_COMP_...)
+ * @load:	Destination load address in U-Boot memory
+ * @image_start Image start address (where we are decompressing from)
+ * @type:	OS type (IH_OS_...)
+ * @load_bug:	Place to decompress to
+ * @image_buf:	Address to decompress from
+ * @image_len:	Number of bytes in @image_buf to decompress
+ * @unc_len:	Available space for decompression
+ * @return 0 if OK, -ve on error (BOOTM_ERR_...)
+ */
+int image_decomp(int comp, ulong load, ulong image_start, int type,
+		 void *load_buf, void *image_buf, ulong image_len,
+		 uint unc_len, ulong *load_end);
+
 /**
  * Set up properties in the FDT
  *
diff --git a/test/compression.c b/test/compression.c
index 7bc0f73e09..dc5e94684f 100644
--- a/test/compression.c
+++ b/test/compression.c
@@ -471,15 +471,15 @@ static int run_bootm_test(struct unit_test_state *uts, int comp_type,
 	unc_len = strlen(plain);
 	compress(uts, (void *)plain, unc_len, compress_buff, compress_size,
 		 &compress_size);
-	err = bootm_decomp_image(comp_type, load_addr, image_start,
-				 IH_TYPE_KERNEL, map_sysmem(load_addr, 0),
-				 compress_buff, compress_size, unc_len,
-				 &load_end);
+	err = image_decomp(comp_type, load_addr, image_start,
+			   IH_TYPE_KERNEL, map_sysmem(load_addr, 0),
+			   compress_buff, compress_size, unc_len,
+			   &load_end);
 	ut_assertok(err);
-	err = bootm_decomp_image(comp_type, load_addr, image_start,
-				 IH_TYPE_KERNEL, map_sysmem(load_addr, 0),
-				 compress_buff, compress_size, unc_len - 1,
-				 &load_end);
+	err = image_decomp(comp_type, load_addr, image_start,
+			   IH_TYPE_KERNEL, map_sysmem(load_addr, 0),
+			   compress_buff, compress_size, unc_len - 1,
+			   &load_end);
 	ut_assert(err);
 
 	/* We can't detect corruption when not decompressing */
@@ -487,10 +487,10 @@ static int run_bootm_test(struct unit_test_state *uts, int comp_type,
 		return 0;
 	memset(compress_buff + compress_size / 2, '\x49',
 	       compress_size / 2);
-	err = bootm_decomp_image(comp_type, load_addr, image_start,
-				 IH_TYPE_KERNEL, map_sysmem(load_addr, 0),
-				 compress_buff, compress_size, 0x10000,
-				 &load_end);
+	err = image_decomp(comp_type, load_addr, image_start,
+			   IH_TYPE_KERNEL, map_sysmem(load_addr, 0),
+			   compress_buff, compress_size, 0x10000,
+			   &load_end);
 	ut_assert(err);
 
 	return 0;
-- 
2.22.0.657.g960e92d24f-goog



More information about the U-Boot mailing list