[U-Boot] [PATCH v1] colibri_imx7: boot kernel in secure mode

[Peng Fan]

> Subject: Re: [U-Boot] [PATCH v1] colibri_imx7: boot kernel in secure mode
> 
> Hi Igor,
> 
> thanks for your comments! Is there any solution, patch or workaround I can
> try to power on the 2nd CPU core in secure mode with mainline kernel?

The upstream maintainer rejected the legacy method for i.MX7, so in upstream
psci was used, with psci, the kernel is booted in non-secure mode.

Regards,
Peng.

> 
> Thanks and best regards
> 
> Tobias
> 
> > I'm afraid you're right.
> > Just after a bit of time researching and discussing with Stefan, seems
> > that we need to introduce two different wrappers for booting the
> > mainline kernel and downstream NXP kernel.
> >
> > * NXP kernel has legacy code to enable all cores, which works only
> > when running in secure mode.
> > * Mainline kernel, as you said before, does use PSCI for this, which
> > is provided by U-boot (which adds proper psci nodes to the linux dtb
> > on-fly before transferring control to the linux kernel entry point).
> > When we try to load it in secure mode, it continues running on the
> > same Secure PL1, and communication using SMC calling convention
> > doesn't make sense at this case.
> 
>