[U-Boot] SiFive clock driver changes for U-Boot 2019.10

[Rick Chen]

Hi Anup

>
> On Thu, Jul 18, 2019 at 11:38 AM Rick Chen <rickchen36 at gmail.com> wrote:
> >
> > Hi Anup
> >
> > >
> > > Hi Rick,
> > >
> > > On Thu, Jul 18, 2019 at 8:27 AM Rick Chen <rickchen36 at gmail.com> wrote:
> > > >
> > > > Hi Anup
> > > >
> > > > >
> > > > > Hi Tom
> > > > >
> > > > > > Sent: Thursday, July 18, 2019 1:00 AM
> > > > > > To: Simon Glass; Rick Jian-Zhi Chen(陳建志)
> > > > > > Cc: Anup Patel; Atish Patra; U-Boot Mailing List
> > > > > > Subject: Re: SiFive clock driver changes for U-Boot 2019.10
> > > > > >
> > > > > > On Wed, Jul 17, 2019 at 10:44:23AM -0600, Simon Glass wrote:
> > > > > > > Hi,
> > > > > > >
> > > > > > > On Wed, 17 Jul 2019 at 00:40, Anup Patel <Anup.Patel at wdc.com> wrote:
> > > > > > > >
> > > > > > > > Hi Simon,
> > > > > > > >
> > > > > > > > Can you pick-up SiFive clock driver changes from below series for
> > > > > > > > U-Boot 2019.10?
> > > > > > >
> > > > > > > I don't see them in my patchwork queue. Who is the custodian for this?
> > > > > >
> > > > > > I had assigned them to Rick as it's RISCV changes and not generic clock changes.
> > > > > > Generic clock stuff (that's not the CCF stuff, that is) goes to me.
> > > > > >
> > > > >
> > > > > I thought it shall be pulled via net tree, because of the changes of
> > > > > net macb when reviewed then.
> > > > > Sure, I can help to pull this series, if you said so. :)
> > > > >
> > > >
> > > > Can you fix the following conflict with master:
> > > >
> > > > Applying: net: macb: Extend MACB driver for SiFive Unleashed board
> > > > error: patch failed: drivers/net/macb.c:83
> > > > error: drivers/net/macb.c: patch does not apply
> > >
> > > Please take all patches except 2 patches for MACB driver. These patches
> > > depend on Ramon's MACB changes so will have to wait. I will follow-up
> > > with Joe for the 2 MACB patches.
> >
> > Understood.
> >
> > >
> > > Once above is done, pick-up last two patches from following series:
> > > "[PATCH v6 0/4] SiFive SPI MMC Support"
> >
> > About this series, you mean I just pull this two patchs, right ?
> > [PATCH v6 4/4] doc: sifive-fu540: Update README for SiFive SPI and MMC
> > SPI drivers
> > [PATCH v6 3/4] riscv: sifive: fu540: Enable SiFive SPI and MMC SPI drivers
>
> Yes, pick these two patches.
>
> The SiFive SPI driver (PATCH2) is taken by Jagan.
>
> The MMC_SPI driver fix (PATCH1) might be taken by Peng/Jagan later.

OK
No problem.

B.R
Rick

>
> Thanks,
> Anup