[U-Boot] [PATCH v4 2/2] board: Add support for iMX8QXP AI_ML board
Manivannan Sadhasivam
manivannan.sadhasivam at linaro.org
Fri Jul 19 06:57:43 UTC 2019
This commit adds initial board support for iMX8QXP AI_ML board from
Einfochips. This board is one of the 96Boards Consumer Edition and AI boards
of the 96Boards family based on i.MX8QXP SoC from NXP/Freescale.
This initial supports contains following peripherals which are tested and
known to work:
1. Debug serial via UART2
2. SD card
3. Ethernet
More information about this board can be found in arrow website:
https://www.arrow.com/en/products/imx8-ai-ml/arrow-development-tools
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
---
arch/arm/mach-imx/imx8/Kconfig | 6 +
board/einfochips/imx8qxp_ai_ml/Kconfig | 12 ++
board/einfochips/imx8qxp_ai_ml/MAINTAINERS | 6 +
board/einfochips/imx8qxp_ai_ml/Makefile | 8 ++
board/einfochips/imx8qxp_ai_ml/README | 49 ++++++++
.../einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c | 117 ++++++++++++++++++
board/einfochips/imx8qxp_ai_ml/imximage.cfg | 24 ++++
board/einfochips/imx8qxp_ai_ml/spl.c | 49 ++++++++
configs/imx8qxp_ai_ml_defconfig | 83 +++++++++++++
include/configs/imx8qxp_ai_ml.h | 104 ++++++++++++++++
10 files changed, 458 insertions(+)
create mode 100644 board/einfochips/imx8qxp_ai_ml/Kconfig
create mode 100644 board/einfochips/imx8qxp_ai_ml/MAINTAINERS
create mode 100644 board/einfochips/imx8qxp_ai_ml/Makefile
create mode 100644 board/einfochips/imx8qxp_ai_ml/README
create mode 100644 board/einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c
create mode 100644 board/einfochips/imx8qxp_ai_ml/imximage.cfg
create mode 100644 board/einfochips/imx8qxp_ai_ml/spl.c
create mode 100644 configs/imx8qxp_ai_ml_defconfig
create mode 100644 include/configs/imx8qxp_ai_ml.h
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index bbe323d5ca..cec21f8dd2 100644
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -37,6 +37,11 @@ config TARGET_COLIBRI_IMX8X
select BOARD_LATE_INIT
select IMX8QXP
+config TARGET_IMX8QXP_AI_ML
+ bool "Support i.MX8QXP AI_ML board"
+ select BOARD_LATE_INIT
+ select IMX8QXP
+
config TARGET_IMX8QM_MEK
bool "Support i.MX8QM MEK board"
select BOARD_LATE_INIT
@@ -49,6 +54,7 @@ config TARGET_IMX8QXP_MEK
endchoice
+source "board/einfochips/imx8qxp_ai_ml/Kconfig"
source "board/freescale/imx8qm_mek/Kconfig"
source "board/freescale/imx8qxp_mek/Kconfig"
source "board/toradex/apalis-imx8/Kconfig"
diff --git a/board/einfochips/imx8qxp_ai_ml/Kconfig b/board/einfochips/imx8qxp_ai_ml/Kconfig
new file mode 100644
index 0000000000..697a831013
--- /dev/null
+++ b/board/einfochips/imx8qxp_ai_ml/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_IMX8QXP_AI_ML
+
+config SYS_BOARD
+ default "imx8qxp_ai_ml"
+
+config SYS_VENDOR
+ default "einfochips"
+
+config SYS_CONFIG_NAME
+ default "imx8qxp_ai_ml"
+
+endif
diff --git a/board/einfochips/imx8qxp_ai_ml/MAINTAINERS b/board/einfochips/imx8qxp_ai_ml/MAINTAINERS
new file mode 100644
index 0000000000..add0bd9431
--- /dev/null
+++ b/board/einfochips/imx8qxp_ai_ml/MAINTAINERS
@@ -0,0 +1,6 @@
+i.MX8QXP AI_ML BOARD
+M: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
+S: Maintained
+F: board/einfochips/imx8qxp_ai_ml/
+F: include/configs/imx8qxp_ai_ml.h
+F: configs/imx8qxp_ai_ml_defconfig
diff --git a/board/einfochips/imx8qxp_ai_ml/Makefile b/board/einfochips/imx8qxp_ai_ml/Makefile
new file mode 100644
index 0000000000..e08774dc6e
--- /dev/null
+++ b/board/einfochips/imx8qxp_ai_ml/Makefile
@@ -0,0 +1,8 @@
+#
+# Copyright 2019 Linaro Ltd.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += imx8qxp_ai_ml.o
+obj-$(CONFIG_SPL_BUILD) += spl.o
diff --git a/board/einfochips/imx8qxp_ai_ml/README b/board/einfochips/imx8qxp_ai_ml/README
new file mode 100644
index 0000000000..488920580f
--- /dev/null
+++ b/board/einfochips/imx8qxp_ai_ml/README
@@ -0,0 +1,49 @@
+U-Boot for the Einfochips i.MX8QXP AI_ML board
+
+Quick Start
+===========
+
+- Get and Build the ARM Trusted firmware
+- Get scfw_tcm.bin and ahab-container.img
+- Build U-Boot
+- Flash the binary into the SD card
+- Boot
+
+Get and Build the ARM Trusted firmware
+======================================
+
+$ git clone https://source.codeaurora.org/external/imx/imx-atf
+$ cd imx-atf/
+$ git checkout origin/imx_4.9.88_imx8qxp_beta2 -b imx_4.9.88_imx8qxp_beta2
+$ make PLAT=imx8qxp bl31
+
+Get scfw_tcm.bin and ahab-container.img
+=======================================
+
+$ wget https://raw.githubusercontent.com/96boards-ai-ml/binaries/master/mx8qx-aiml-scfw-tcm.bin
+$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.1.bin
+$ chmod +x firmware-imx-8.1.bin
+$ ./firmware-imx-8.1.bin
+
+Copy the following binaries to U-Boot folder:
+
+$ cp imx-atf/build/imx8qxp/release/bl31.bin .
+$ cp firmware-imx-8.1/firmware/seco/mx8qx-ahab-container.img .
+
+Build U-Boot
+============
+
+$ make imx8qxp_ai_ml_defconfig
+$ make u-boot-dtb.imx
+
+Flash the binary into the SD card
+=================================
+
+Burn the u-boot-dtb.imx binary to SD card offset 32KB:
+
+$ sudo dd if=u-boot-dtb.imx of=/dev/sd[x] bs=1024 seek=32
+
+Boot
+====
+
+Set Boot switch SW2: 1100.
diff --git a/board/einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c b/board/einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c
new file mode 100644
index 0000000000..e7632524a0
--- /dev/null
+++ b/board/einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ * Copyright 2019 Linaro Ltd.
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <linux/libfdt.h>
+#include <environment.h>
+#include <fsl_esdhc.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sci/sci.h>
+#include <asm/arch/imx8-pins.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/sys_proto.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL ((SC_PAD_CONFIG_OUT_IN << PADRING_CONFIG_SHIFT) | \
+ (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \
+ (SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \
+ (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT))
+
+static iomux_cfg_t uart2_pads[] = {
+ SC_P_UART2_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+ SC_P_UART2_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+static void setup_iomux_uart(void)
+{
+ imx8_iomux_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
+}
+
+int board_early_init_f(void)
+{
+ sc_pm_clock_rate_t rate = SC_80MHZ;
+ int ret;
+
+ /* Set UART2 clock root to 80 MHz */
+ ret = sc_pm_setup_uart(SC_R_UART_2, rate);
+ if (ret)
+ return ret;
+
+ setup_iomux_uart();
+
+ return 0;
+}
+
+#if IS_ENABLED(CONFIG_DM_GPIO)
+static void board_gpio_init(void)
+{
+ /* TODO */
+}
+#else
+static inline void board_gpio_init(void) {}
+#endif
+
+#if IS_ENABLED(CONFIG_FEC_MXC)
+#include <miiphy.h>
+
+int board_phy_config(struct phy_device *phydev)
+{
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8);
+
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100);
+
+ if (phydev->drv->config)
+ phydev->drv->config(phydev);
+
+ return 0;
+}
+#endif
+
+int checkboard(void)
+{
+ puts("Board: iMX8QXP AI_ML\n");
+
+ build_info();
+ print_bootinfo();
+
+ return 0;
+}
+
+int board_init(void)
+{
+ board_gpio_init();
+
+ return 0;
+}
+
+/* Board specific reset that is system reset */
+
+void reset_cpu(ulong addr)
+{
+ /* TODO */
+}
+
+#ifdef CONFIG_OF_BOARD_SETUP
+int ft_board_setup(void *blob, bd_t *bd)
+{
+ return 0;
+}
+#endif
+
+int board_mmc_get_env_dev(int devno)
+{
+ return devno;
+}
+
+int board_late_init(void)
+{
+ return 0;
+}
diff --git a/board/einfochips/imx8qxp_ai_ml/imximage.cfg b/board/einfochips/imx8qxp_ai_ml/imximage.cfg
new file mode 100644
index 0000000000..4fc5ade313
--- /dev/null
+++ b/board/einfochips/imx8qxp_ai_ml/imximage.cfg
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ *
+ * Refer doc/README.imx8image for more details about how-to configure
+ * and create imx8image boot image
+ */
+
+#define __ASSEMBLY__
+
+/* Boot from SD, sector size 0x400 */
+BOOT_FROM SD 0x400
+/* SoC type IMX8QX */
+SOC_TYPE IMX8QX
+/* Append seco container image */
+APPEND mx8qx-ahab-container.img
+/* Create the 2nd container */
+CONTAINER
+/* Add scfw image with exec attribute */
+IMAGE SCU mx8qx-aiml-scfw-tcm.bin
+/* Add ATF image with exec attribute */
+IMAGE A35 bl31.bin 0x80000000
+/* Add U-Boot image with load attribute */
+DATA A35 u-boot-dtb.bin 0x80020000
diff --git a/board/einfochips/imx8qxp_ai_ml/spl.c b/board/einfochips/imx8qxp_ai_ml/spl.c
new file mode 100644
index 0000000000..63581eeaaf
--- /dev/null
+++ b/board/einfochips/imx8qxp_ai_ml/spl.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2018 NXP
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <spl.h>
+#include <dm/uclass.h>
+#include <dm/device.h>
+#include <dm/uclass-internal.h>
+#include <dm/device-internal.h>
+#include <dm/lists.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void spl_board_init(void)
+{
+ struct udevice *dev;
+
+ uclass_find_first_device(UCLASS_MISC, &dev);
+
+ for (; dev; uclass_find_next_device(&dev)) {
+ if (device_probe(dev))
+ continue;
+ }
+
+ arch_cpu_init();
+
+ board_early_init_f();
+
+ timer_init();
+
+ preloader_console_init();
+
+ puts("Normal Boot\n");
+}
+
+void board_init_f(ulong dummy)
+{
+ /* Clear global data */
+ memset((void *)gd, 0, sizeof(gd_t));
+
+ /* Clear the BSS. */
+ memset(__bss_start, 0, __bss_end - __bss_start);
+
+ board_init_r(NULL, 0);
+}
diff --git a/configs/imx8qxp_ai_ml_defconfig b/configs/imx8qxp_ai_ml_defconfig
new file mode 100644
index 0000000000..e20a0c783e
--- /dev/null
+++ b/configs/imx8qxp_ai_ml_defconfig
@@ -0,0 +1,83 @@
+CONFIG_ARM=y
+CONFIG_ARCH_IMX8=y
+CONFIG_SYS_TEXT_BASE=0x80020000
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_TARGET_IMX8QXP_AI_ML=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=4
+CONFIG_SPL=y
+CONFIG_FIT=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/einfochips/imx8qxp_ai_ml/imximage.cfg"
+CONFIG_BOOTDELAY=3
+CONFIG_LOG=y
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_POWER_DOMAIN=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_CPU=y
+# CONFIG_CMD_IMPORTENV is not set
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DM=y
+CONFIG_CMD_FUSE=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_FAT_WRITE=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qxp-ai_ml"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_CLK=y
+CONFIG_CLK_IMX8=y
+CONFIG_CPU=y
+CONFIG_DM_GPIO=y
+CONFIG_MXC_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_IMX_LPI2C=y
+CONFIG_MISC=y
+CONFIG_DM_MMC=y
+CONFIG_FSL_ESDHC=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_ADDR_ENABLE=y
+CONFIG_PHY_ATHEROS=y
+CONFIG_DM_ETH=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_PHY_GIGE=y
+CONFIG_FEC_MXC_SHARE_MDIO=y
+CONFIG_FEC_MXC_MDIO_BASE=0x5B040000
+CONFIG_FEC_MXC=y
+CONFIG_MII=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_IMX8=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_IMX8_POWER_DOMAIN=y
+CONFIG_DM_REGULATOR=y
+CONFIG_SPL_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_SPL_DM_REGULATOR_GPIO=y
+CONFIG_DM_SERIAL=y
+CONFIG_FSL_LPUART=y
+CONFIG_SPL_TINY_MEMSET=y
+# CONFIG_EFI_LOADER is not set
diff --git a/include/configs/imx8qxp_ai_ml.h b/include/configs/imx8qxp_ai_ml.h
new file mode 100644
index 0000000000..dd31189845
--- /dev/null
+++ b/include/configs/imx8qxp_ai_ml.h
@@ -0,0 +1,104 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ * Copyright 2019 Linaro Ltd.
+ */
+
+#ifndef __IMX8QXP_AI_ML_H
+#define __IMX8QXP_AI_ML_H
+
+#include <linux/sizes.h>
+#include <asm/arch/imx-regs.h>
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SPL_MAX_SIZE (124 * 1024)
+#define CONFIG_SYS_MONITOR_LEN (1024 * 1024)
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x250
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 0
+
+#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
+#define CONFIG_SPL_STACK 0x013E000
+#define CONFIG_SPL_BSS_START_ADDR 0x00128000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x1000 /* 4 KB */
+#define CONFIG_SYS_SPL_MALLOC_START 0x00120000
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x3000 /* 12 KB */
+#define CONFIG_SERIAL_LPUART_BASE 0x5a080000
+#define CONFIG_MALLOC_F_ADDR 0x00120000
+
+#define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE
+
+#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
+
+#define CONFIG_OF_EMBED
+#endif
+
+#define CONFIG_REMAKE_ELF
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/* Flat Device Tree Definitions */
+#define CONFIG_OF_BOARD_SETUP
+
+#define CONFIG_FSL_USDHC
+
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 1) \
+ func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "console=ttyLP2 earlycon\0" \
+ "fdt_addr_r=0x83000000\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "ramdisk_addr_r=0x94400000\0" \
+ "scriptaddr=0x89000000\0" \
+ "fdtfile=imx8qxp-ai_ml.dtb\0" \
+ "fdt_high=0xffffffffffffffff\0" \
+ "image=Image\0" \
+ "initrd_addr=0x83800000\0" \
+ "initrd_high=0xffffffffffffffff\0" \
+ "netargs=setenv bootargs console=${console},${baudrate} " \
+ "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp" \
+ "\0" \
+ "nfsboot=run netargs; dhcp ${loadaddr} ${image}; tftp ${fdt_addr} " \
+ "imx8qxp-ai_ml/${fdt_file}; booti ${loadaddr} - ${fdt_addr}\0" \
+ BOOTENV
+
+/* Link Definitions */
+#define CONFIG_LOADADDR 0x80280000
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+#define CONFIG_SYS_INIT_SP_ADDR 0x80200000
+
+/* Default environment is in SD */
+#define CONFIG_ENV_SIZE 0x1000
+#define CONFIG_ENV_OFFSET (64 * SZ_64K)
+
+/* USDHC2 is the SD card interface */
+#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */
+#define CONFIG_SYS_FSL_USDHC_NUM 2
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN ((CONFIG_ENV_SIZE + (32 * 1024)) * 1024)
+
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
+#define PHYS_SDRAM_1 0x80000000
+#define PHYS_SDRAM_2 0x880000000
+#define PHYS_SDRAM_1_SIZE SZ_2G /* 2 GB */
+#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 GB */
+
+/* Generic Timer Definitions */
+#define COUNTER_FREQUENCY 8000000 /* 8MHz */
+
+/* Networking */
+#define CONFIG_FEC_XCV_TYPE RGMII
+#define FEC_QUIRK_ENET_MAC
+
+#endif /* __IMX8QXP_AI_ML_H */
--
2.17.1
More information about the U-Boot
mailing list