[U-Boot] [PATCH v1 2/2] ARM: dts: imx6ull-colibri: pre-reloc for uart pinmux modes

[Igor Opaniuk]

From: Igor Opaniuk <igor.opaniuk at toradex.com>

Add u-boot,dm-pre-reloc property for uart pinmux configuration
nodes, which enables UART as early as possible (before relocation).

Without this we miss almost the half of output (U-boot version,
CPU defails, Reset cause, DRAM details etc.).

Fixes: cd69e8ef9b ("colibri-imx6ull: migrate pinctrl and regulators to dtb/dm")
Signed-off-by: Igor Opaniuk <igor.opaniuk at toradex.com>
---

 arch/arm/dts/imx6ull-colibri.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/dts/imx6ull-colibri.dts b/arch/arm/dts/imx6ull-colibri.dts
index 6c847ab792..8cc67a1fa7 100644
--- a/arch/arm/dts/imx6ull-colibri.dts
+++ b/arch/arm/dts/imx6ull-colibri.dts
@@ -458,6 +458,7 @@
 	};
 
 	pinctrl_uart1: uart1-grp {
+		u-boot,dm-pre-reloc;
 		fsl,pins = <
 			MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX	0x1b0b1
 			MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX	0x1b0b1
@@ -467,6 +468,7 @@
 	};
 
 	pinctrl_uart1_ctrl1: uart1-ctrl1-grp { /* Additional DTR, DCD */
+		u-boot,dm-pre-reloc;
 		fsl,pins = <
 			MX6UL_PAD_JTAG_TDI__GPIO1_IO13		0x1b0b1 /* DCD */
 			MX6UL_PAD_LCD_DATA18__GPIO3_IO23	0x1b0b1 /* DSR */
-- 
2.17.1