[U-Boot] [PATCH V2 00/51] Support i.MX8MM/N
Peng Fan
peng.fan at nxp.com
Mon Jul 8 08:49:52 UTC 2019
> Subject: Re: [U-Boot] [PATCH V2 00/51] Support i.MX8MM/N
>
> Hi Peng,
>
> On 08.07.19 03:38, Peng Fan wrote:
> > This patchset is to support i.MX8MM/8MN with some update in ddr
> > settings and ddr driver update.
> >
> > V2:
> > Fix build break, add Cc for some patches, and drop CCF select in
> > i.MX8MM Fix script to remove srctree in tools/imx8m_image.sh Fix
> > License Rebased
>
> It seems like patch 29 is missing. I can't apply the series to master.
The patch is a bit big, patchwork blocks it, need admin to approve.
You could take patches from here.
https://github.com/MrVan/u-boot/tree/8m-7-5
Regards,
Peng.
>
> Regards,
> Frieder
>
> >
> > V1:
> > The initial patchset to support i.MX8MM is
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatc
> >
> hwork.ozlabs.org%2Fcover%2F1093140%2F&data=02%7C01%7Cpeng.fa
> n%40nx
> >
> p.com%7C3cdae44c2666481a810c08d70380fa74%7C686ea1d3bc2b4c6fa92
> cd99c5c3
> >
> 01635%7C0%7C0%7C636981724817212847&sdata=gP8Rmx0rpBZJoJAG
> Auun0iiwV
> > lDLJ5gjDDMR340FRn4%3D&reserved=0
> > But in this patchset I dropped CCF, and use original CLK uclass
> >
> >
> > Bai Ping (1):
> > imx8mq: Update the ddrc QoS setting for B1 chip
> >
> > Jacky Bai (2):
> > driver: ddr: Refine the ddr init driver on imx8m
> > ddr: imx8m: Fix the ddr init hang on imx8mq
> >
> > Peng Fan (46):
> > linux: compat: guard PAGE_SIZE
> > dm: clk: ignore default settings when node not valid
> > pinctrl: imx: use devfdt_get_addr_size_index
> > i2c: mxc: add CONFIG_CLK support
> > tools: imx8m_image: align spl bin image size
> > ddr: imx8m: fix ddr firmware location when enable SPL OF
> > tools: imx8mimage: fix HDMI/FIT parsing
> > imx8m: add image cfg for i.MX8MM lpddr4
> > imx: add IMX8MQ kconfig entry
> > imx: add IMX8MM kconfig entry
> > imx: imx8mm: add clock bindings header
> > imx: add i.MX8MM cpu type
> > imx: spl: add spl_board_boot_device for i.MX8MM
> > imx8m: update imx-regs for i.MX8MM
> > imx: add get_cpu_rev support for i.MX8MM
> > imx8m: rename clock to clock_imx8mq
> > imx8m: restructure clock.h
> > imx8m: add clk support for i.MX8MM
> > imx8m: soc: probe clk before relocation
> > imx8m: add pin header for i.MX8MM
> > imx: add i.MX8MM PE property
> > imx8m: Fix MMU table issue for OPTEE memory
> > imx8m: set BYPASS ID SWAP to avoid AXI bus errors
> > imx8m: soc: enable SCTR clock before timer init
> > serial: Kconfig: make MXC_UART usable for MX7 and IMX8M
> > clk: imx: add Kconfig entry for i.MX8MM
> > clk: imx: add i.MX8MM clk driver
> > imx: add i.MX8MM EVK board support
> > imx: add i.MX8MN kconfig entry
> > imx8mn: support get_cpu_rev
> > imx8m: add clk support for i.MX8MN
> > imx8mn: set BYPASS ID SWAP to avoid AXI bus errors
> > imx: add i.MX8MN PE property
> > imx8mn: add pin header
> > imx: spl: use spl_board_boot_device for i.MX8MN
> > spl: pass args to board_return_to_bootrom
> > imx: add rom api support
> > imx: cpu: restrict get_boot_device
> > imx8mn: add get_boot_device
> > tools: imx8mimage: add ROM VERSION
> > pinctrl: imx8m: support i.MX8MN
> > tools: imx8m_image: support ddr4 firmware
> > clk: imx: add i.MX8MN clk support
> > imx8m: add i.MX8MN ddr4 image cfg file
> > imx: add dtsi for i.MX8MN
> > imx: add i.MX8MN DDR4 board support
> >
> > Ye Li (2):
> > imx8m: Configure trustzone region 0 for non-secure access
> > ddr: imx8m: Fix ddr4 driver build issue
> >
> > arch/arm/dts/Makefile | 4 +-
> > arch/arm/dts/imx8mm-evk-u-boot.dtsi | 92 +
> > arch/arm/dts/imx8mm-evk.dts | 235 +++
> > arch/arm/dts/imx8mm-pinfunc.h | 629
> +++++++
> > arch/arm/dts/imx8mm.dtsi | 733
> ++++++++
> > arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi | 92 +
> > arch/arm/dts/imx8mn-ddr4-evk.dts | 221 +++
> > arch/arm/dts/imx8mn-pinfunc.h | 646
> +++++++
> > arch/arm/dts/imx8mn.dtsi | 712
> +++++++
> > arch/arm/include/asm/arch-imx/cpu.h | 7 +
> > arch/arm/include/asm/arch-imx8m/clock.h | 494 +----
> > arch/arm/include/asm/arch-imx8m/clock_imx8mm.h | 465
> +++++
> > arch/arm/include/asm/arch-imx8m/clock_imx8mq.h | 424
> +++++
> > arch/arm/include/asm/arch-imx8m/imx-regs.h | 75 +-
> > arch/arm/include/asm/arch-imx8m/imx8mm_pins.h | 691
> +++++++
> > arch/arm/include/asm/arch-imx8m/imx8mn_pins.h | 763
> ++++++++
> > arch/arm/include/asm/mach-imx/iomux-v3.h | 4 +
> > arch/arm/include/asm/mach-imx/mxc_i2c.h | 6 +
> > arch/arm/include/asm/mach-imx/sys_proto.h | 42 +
> > arch/arm/mach-imx/Kconfig | 4 +
> > arch/arm/mach-imx/Makefile | 2 +
> > arch/arm/mach-imx/cpu.c | 16 +-
> > arch/arm/mach-imx/imx8m/Kconfig | 28 +-
> > arch/arm/mach-imx/imx8m/Makefile | 4 +-
> > arch/arm/mach-imx/imx8m/clock_imx8mm.c | 707
> +++++++
> > .../arm/mach-imx/imx8m/{clock.c => clock_imx8mq.c} | 7 +-
> > arch/arm/mach-imx/imx8m/clock_slice.c | 815
> ++++++++
> > arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg | 16 +
> > arch/arm/mach-imx/imx8m/imximage-8mn-ddr4.cfg | 17 +
> > arch/arm/mach-imx/imx8m/soc.c | 162 +-
> > arch/arm/mach-imx/imx_romapi.c | 292
> +++
> > arch/arm/mach-imx/spl.c | 8 +
> > arch/arm/mach-rockchip/rk3288-board-tpl.c | 5 +-
> > arch/arm/mach-rockchip/rk3368-board-tpl.c | 5 +-
> > arch/arm/mach-rockchip/rk3399-board-spl.c | 5 +-
> > arch/arm/mach-rockchip/rk3399-board-tpl.c | 5 +-
> > board/freescale/imx8mm_evk/Kconfig | 12 +
> > board/freescale/imx8mm_evk/MAINTAINERS | 6 +
> > board/freescale/imx8mm_evk/Makefile | 12 +
> > board/freescale/imx8mm_evk/imx8mm_evk.c | 90 +
> > board/freescale/imx8mm_evk/lpddr4_timing.c | 1980
> ++++++++++++++++++++
> > board/freescale/imx8mm_evk/spl.c | 216 +++
> > board/freescale/imx8mn_evk/Kconfig | 14 +
> > board/freescale/imx8mn_evk/MAINTAINERS | 6 +
> > board/freescale/imx8mn_evk/Makefile | 12 +
> > board/freescale/imx8mn_evk/ddr4_timing.c | 1213
> ++++++++++++
> > board/freescale/imx8mn_evk/imx8mn_evk.c | 85 +
> > board/freescale/imx8mn_evk/spl.c | 90 +
> > board/freescale/imx8mq_evk/lpddr4_timing.c | 16 +-
> > common/spl/spl_bootrom.c | 7 +-
> > configs/imx8mm_evk_defconfig | 51 +
> > configs/imx8mn_ddr4_evk_defconfig | 53 +
> > drivers/clk/clk-uclass.c | 3 +
> > drivers/clk/imx/Kconfig | 14 +
> > drivers/clk/imx/Makefile | 1 +
> > drivers/clk/imx/clk-imx8mm.c | 121 ++
> > drivers/ddr/imx/imx8m/Kconfig | 6 +
> > drivers/ddr/imx/imx8m/Makefile | 4 +-
> > drivers/ddr/imx/imx8m/ddr4_init.c | 113 --
> > drivers/ddr/imx/imx8m/ddr_init.c | 168 ++
> > drivers/ddr/imx/imx8m/ddrphy_utils.c | 4 +
> > drivers/ddr/imx/imx8m/helper.c | 22 +-
> > drivers/ddr/imx/imx8m/lpddr4_init.c | 188 --
> > drivers/i2c/mxc_i2c.c | 17 +
> > drivers/pinctrl/nxp/pinctrl-imx.c | 4 +-
> > drivers/pinctrl/nxp/pinctrl-imx8m.c | 1 +
> > drivers/serial/Kconfig | 2 +-
> > include/configs/imx8mm_evk.h | 200 ++
> > include/configs/imx8mn_evk.h | 198 ++
> > include/dt-bindings/clock/imx8mm-clock.h | 244 +++
> > include/dt-bindings/clock/imx8mn-clock.h | 215 +++
> > include/imximage.h | 1 +
> > include/linux/compat.h | 2 +
> > include/spl.h | 3 +-
> > tools/imx8m_image.sh | 15 +-
> > tools/imx8mimage.c | 31 +-
> > 76 files changed, 13065 insertions(+), 808 deletions(-)
> > create mode 100644 arch/arm/dts/imx8mm-evk-u-boot.dtsi
> > create mode 100644 arch/arm/dts/imx8mm-evk.dts
> > create mode 100644 arch/arm/dts/imx8mm-pinfunc.h
> > create mode 100644 arch/arm/dts/imx8mm.dtsi
> > create mode 100644 arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi
> > create mode 100644 arch/arm/dts/imx8mn-ddr4-evk.dts
> > create mode 100644 arch/arm/dts/imx8mn-pinfunc.h
> > create mode 100644 arch/arm/dts/imx8mn.dtsi
> > create mode 100644
> arch/arm/include/asm/arch-imx8m/clock_imx8mm.h
> > create mode 100644
> arch/arm/include/asm/arch-imx8m/clock_imx8mq.h
> > create mode 100644
> arch/arm/include/asm/arch-imx8m/imx8mm_pins.h
> > create mode 100644
> arch/arm/include/asm/arch-imx8m/imx8mn_pins.h
> > create mode 100644 arch/arm/mach-imx/imx8m/clock_imx8mm.c
> > rename arch/arm/mach-imx/imx8m/{clock.c => clock_imx8mq.c} (99%)
> > create mode 100644
> arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg
> > create mode 100644
> arch/arm/mach-imx/imx8m/imximage-8mn-ddr4.cfg
> > create mode 100644 arch/arm/mach-imx/imx_romapi.c
> > create mode 100644 board/freescale/imx8mm_evk/Kconfig
> > create mode 100644 board/freescale/imx8mm_evk/MAINTAINERS
> > create mode 100644 board/freescale/imx8mm_evk/Makefile
> > create mode 100644 board/freescale/imx8mm_evk/imx8mm_evk.c
> > create mode 100644 board/freescale/imx8mm_evk/lpddr4_timing.c
> > create mode 100644 board/freescale/imx8mm_evk/spl.c
> > create mode 100644 board/freescale/imx8mn_evk/Kconfig
> > create mode 100644 board/freescale/imx8mn_evk/MAINTAINERS
> > create mode 100644 board/freescale/imx8mn_evk/Makefile
> > create mode 100644 board/freescale/imx8mn_evk/ddr4_timing.c
> > create mode 100644 board/freescale/imx8mn_evk/imx8mn_evk.c
> > create mode 100644 board/freescale/imx8mn_evk/spl.c
> > create mode 100644 configs/imx8mm_evk_defconfig
> > create mode 100644 configs/imx8mn_ddr4_evk_defconfig
> > create mode 100644 drivers/clk/imx/clk-imx8mm.c
> > delete mode 100644 drivers/ddr/imx/imx8m/ddr4_init.c
> > create mode 100644 drivers/ddr/imx/imx8m/ddr_init.c
> > delete mode 100644 drivers/ddr/imx/imx8m/lpddr4_init.c
> > create mode 100644 include/configs/imx8mm_evk.h
> > create mode 100644 include/configs/imx8mn_evk.h
> > create mode 100644 include/dt-bindings/clock/imx8mm-clock.h
> > create mode 100644 include/dt-bindings/clock/imx8mn-clock.h
> >
More information about the U-Boot
mailing list