[U-Boot] [BUG] Build failure conga-qeval20-qa3-e3845

[Bin Meng]

On Sun, Jul 28, 2019 at 5:52 PM Heinrich Schuchardt <xypron.glpk at gmx.de> wrote:
>
> On 7/28/19 11:35 AM, Bin Meng wrote:
> > On Sun, Jul 28, 2019 at 5:08 PM Heinrich Schuchardt <xypron.glpk at gmx.de> wrote:
> >>
> >> On 7/28/19 10:56 AM, Bin Meng wrote:
> >>> On Sun, Jul 28, 2019 at 4:33 PM Heinrich Schuchardt <xypron.glpk at gmx.de> wrote:
> >>>>
> >>>> On 7/28/19 9:41 AM, Bin Meng wrote:
> >>>>> +Stefan
> >>>>>
> >>>>> Hi Heinrich,
> >>>>>
> >>>>> On Sun, Jul 28, 2019 at 2:32 PM Heinrich Schuchardt <xypron.glpk at gmx.de> wrote:
> >>>>>>
> >>>>>>
> >>>>>> Hello Tom,
> >>>>>>
> >>>>>> origin/master commit bfe28bc70fc8b192878d6e8b7f7db344091643cf fails to
> >>>>>> build conga-qeval20-qa3-e3845 on Debian Buster:
> >>>>>>
> >>>>>
> >>>>> I cannot reproduce it. Did you set CONFIG_BUILD_ROM = y?
> >>>>
> >>>> My expectation is that if I call 'make
> >>>> conga-qeval20-qa3-e3845_defconfig' it sets all necessary configuration
> >>>> options to build successfully. This defconfig results in
> >>>>
> >>>> # CONFIG_BUILD_ROM is not set
> >>>>
> >>>
> >>> Sorry I was not clear. CONFIG_BUILD_ROM should not be set. When it is
> >>> unset, it does not touch descriptor.bin. I thought you previously had
> >>> it enabled hence binman tried to find descriptor.bin.
> >>>
> >>>> Setting CONFIG_BUILD_ROM=y does not solve the problem.
> >>>>
> >>>> Did you delete all *.bin files before testing? 'make mrproper' does not
> >>>> delete *.bin from the build path. Shouldn't it remove generated *.bin?
> >>>>
> >>>
> >>> *.bin in the board directory is kept there because it's not generated
> >>> during U-Boot build.
> >>>
> >>> I still cannot reproduce this. Not sure what's wrong.
> >>
> >> In my .bashrc I had export BUILD_ROM=y. In earlier releases
> >> qemu-x86_defconfig needed this. If I unset this variable the build works
> >> on my local system. Thanks for the hint.
> >>
> >
> > Good to hear.
> >
> >> This still leaves me with the question what is broken on Gitlab (Travis
> >> CI ran fine).
> >>
> >
> > I tried to look at the Gitlab log but when I opened
> > https://gitlab.denx.de/u-boot/custodians/u-boot-efi/-/jobs/2155, it
> > gave me 404.
>
> To me was shown only when logged on.
>

I have been logged on but still cannot see that. I suspect that's
because I am not a member of the u-boot-efi git repo.

> I append the log below.
>
> Best regards
>
> Heinrich
>
>
>
>     U-Boot
>     Custodians
>     EFI U-Boot Custodian TreeEFI U-Boot Custodian Tree
>     Jobs
>     #2155
>
> failed Job #2155 triggered 11 hours ago by Heinrich Schuchardt's avatar
> Heinrich Schuchardt
>
>
> Running with gitlab-runner 12.0.1 (0e5417a3)
>   on konsulko-bootbake G37FKVsV
> Using Docker executor with image
> trini/u-boot-gitlab-ci-runner:xenial-20190720-24Jul2019 ...
> Pulling docker image
> trini/u-boot-gitlab-ci-runner:xenial-20190720-24Jul2019 ...
> Using docker image
> sha256:5b1c8d4e86ff4494305883637941b882b324282a91d57d6157d1140e7a67d9d3
> for trini/u-boot-gitlab-ci-runner:xenial-20190720-24Jul2019 ...
> Running on runner-G37FKVsV-project-553-concurrent-0 via bootbake...
> Fetching changes...
> Reinitialized existing Git repository in
> /builds/u-boot/custodians/u-boot-efi/.git/
> Checking out 5bab6711 as efi-2019-10...
> Removing boards.cfg
> Removing tools/binman/cbfs_util.pyc
> Removing tools/binman/cmdline.pyc
> Removing tools/binman/control.pyc
> Removing tools/binman/elf.pyc
> Removing tools/binman/entry.pyc
> Removing tools/binman/etype/__init__.pyc
> Removing tools/binman/etype/blob.pyc
> Removing tools/binman/etype/blob_dtb.pyc
> Removing tools/binman/etype/fdtmap.pyc
> Removing tools/binman/etype/image_header.pyc
> Removing tools/binman/etype/powerpc_mpc85xx_bootpg_resetvec.pyc
> Removing tools/binman/etype/section.pyc
> Removing tools/binman/etype/u_boot_dtb_with_ucode.pyc
> Removing tools/binman/etype/u_boot_with_ucode_ptr.pyc
> Removing tools/binman/image.pyc
> Removing tools/binman/state.pyc
> Removing tools/buildman/board.pyc
> Removing tools/buildman/bsettings.pyc
> Removing tools/buildman/builder.pyc
> Removing tools/buildman/builderthread.pyc
> Removing tools/buildman/cmdline.pyc
> Removing tools/buildman/control.pyc
> Removing tools/buildman/kconfiglib.pyc
> Removing tools/buildman/toolchain.pyc
> Removing tools/concurrencytest/concurrencytest.pyc
> Removing tools/dtoc/fdt.pyc
> Removing tools/dtoc/fdt_util.pyc
> Removing tools/patman/checkpatch.pyc
> Removing tools/patman/command.pyc
> Removing tools/patman/commit.pyc
> Removing tools/patman/cros_subprocess.pyc
> Removing tools/patman/get_maintainer.pyc
> Removing tools/patman/gitutil.pyc
> Removing tools/patman/patchstream.pyc
> Removing tools/patman/series.pyc
> Removing tools/patman/settings.pyc
> Removing tools/patman/terminal.pyc
> Removing tools/patman/test_util.pyc
> Removing tools/patman/tools.pyc
> Removing tools/patman/tout.pyc
>
> Skipping Git submodules setup
> $ ret=0; ./tools/buildman/buildman -P -E -x arm,powerpc || ret=$?; if [[
> $ret -ne 0 && $ret -ne 129 ]]; then ./tools/buildman/buildman -sdeP;
> exit $ret; fi;
> Building current source for 167 boards (24 threads, 1 job per thread)
>
> Starting build...
>     0    0    0 /167    (starting)
>
>
>     1    0    0 /167    1:06:16  : vct_platinumavc
>
>        x86:  +   conga-qeval20-qa3-e3845-internal-uart
> +Compiler aborting due to parser-detected syntax error(s)
> +board/congatec/conga-qeval20-qa3-e3845/dsdt.asl.tmp    731:

This is weird. What IASL version did that use?

I am using:

$ iasl -v

Intel ACPI Component Architecture
ASL+ Optimizing Compiler version 20160108-64
Copyright (c) 2000 - 2016 Intel Corporation

Regards,
Bin

Regards,
Bin