[U-Boot] [PATCH 0/4] Make some changes to SDP

[Angus Ainslie]

Hi Sherry,

On 2019-07-17 18:40, sherry sun wrote:
> From: Sherry Sun <sherry.sun at nxp.com>
> 
> This patchset adds:
> 1. Add usb_gadget_initialize() and usb_gadget_release() to initialize 
> and
> release UDC during sdp download.
> 2. Add high speed endpoint descriptor for sdp.
> 3. Add a macro definition--CONFIG_SDP_LOADADDR as default sdp load
> address while SDP_WRITE and SDP_JUMP command addr is zero.
> 
> Sherry Sun (4):
>   imx: spl: Change USB boot device type
>   SDP: use CONFIG_SDP_LOADADDR as default load address
>   SDP: fix wrong usb request size and add high speed endpoint 
> descriptor
>   SDP: Call usb_gadget_initialize and usb_gadget_release to support UDC

These changes look like like they target SDP on imx8. For imx8mq is this 
all that is required to get SDP working with uuu or are there additional 
changes required ?

Thanks
Angus

> 
>  arch/arm/mach-imx/spl.c    |  2 +-
>  common/spl/spl_sdp.c       |  4 ++++
>  drivers/usb/gadget/Kconfig |  4 ++++
>  drivers/usb/gadget/f_sdp.c | 39 +++++++++++++++++++++++++++++++++-----
>  4 files changed, 43 insertions(+), 6 deletions(-)