[U-Boot] [PATCH 1/1] Dockerfile: build GRUB UEFI targets

[Bin Meng]

On Sat, Jul 27, 2019 at 4:43 PM Heinrich Schuchardt <xypron.glpk at gmx.de> wrote:
>
> Build GRUB UEFI targets grubarm.efi and grubaa64.efi. These are needed for
> running test_efi_grub_net().
>
> Signed-off-by: Heinrich Schuchardt <xypron.glpk at gmx.de>
> ---
> This patch applies to
> https://gitlab.denx.de/u-boot/gitlab-ci-runner
> ---
>  Dockerfile | 39 ++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 38 insertions(+), 1 deletion(-)
>
> diff --git a/Dockerfile b/Dockerfile
> index e8468ce..23d4042 100644
> --- a/Dockerfile
> +++ b/Dockerfile
> @@ -31,8 +31,10 @@ RUN wget -O - https://github.com/foss-xtensa/toolchain/releases/download/2018.02
>  RUN wget -O - https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/download/arc-2018.09-release/arc_gnu_2018.09_prebuilt_uclibc_le_archs_linux_install.tar.gz | tar -C /opt -xz
>  RUN wget -O - https://github.com/vincentzwc/prebuilt-nds32-toolchain/releases/download/20180521/nds32le-linux-glibc-v3-upstream.tar.gz | tar -C /opt -xz
>
> -# Updat and install things from apt now
> +# Update and install things from apt now
>  RUN apt-get update && apt-get install -y \
> +       automake \
> +       autopoint \
>         bc \
>         bison \
>         build-essential \
> @@ -77,6 +79,41 @@ RUN apt-get update && apt-get install -y \
>         zip \
>         && rm -rf /var/lib/apt/lists/*
>
> +# Build GRUB UEFI targets grubarm.efi and grubaa64.efi
> +RUN git clone git://git.savannah.gnu.org/grub.git /tmp/grub && \
> +       cd /tmp/grub && \
> +       git checkout grub-2.04 && \
> +       ./bootstrap && \
> +       mkdir -p /opt/grub && \
> +       ./configure --target=aarch64 --with-platform=efi \
> +       CC=gcc \
> +       TARGET_CC=/opt/gcc-7.3.0-nolibc/aarch64-linux/bin/aarch64-linux-gcc \
> +       TARGET_OBJCOPY=/opt/gcc-7.3.0-nolibc/aarch64-linux/bin/aarch64-linux-objcopy \
> +       TARGET_STRIP=/opt/gcc-7.3.0-nolibc/aarch64-linux/bin/aarch64-linux-strip \
> +       TARGET_NM=/opt/gcc-7.3.0-nolibc/aarch64-linux/bin/aarch64-linux-nm \
> +       TARGET_RANLIB=/opt/gcc-7.3.0-nolibc/aarch64-linux/bin/aarch64-linux-ranlib && \
> +       make && \
> +       ./grub-mkimage -O arm64-efi -o /opt/grub/grubaa64.efi --prefix= -d \

Use grub-mkstandalone to simplify the command a little bit?

> +       grub-core cat chain configfile echo efinet ext2 fat halt help linux \
> +       lsefisystab loadenv lvm minicmd normal part_msdos part_gpt reboot \
> +       search search_fs_file search_fs_uuid search_label serial sleep test \
> +       true && \
> +       make clean && \
> +       ./configure --target=arm --with-platform=efi \
> +       CC=gcc \
> +       TARGET_CC=/opt/gcc-7.3.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-gcc \
> +       TARGET_OBJCOPY=/opt/gcc-7.3.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-objcopy \
> +       TARGET_STRIP=/opt/gcc-7.3.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-strip \
> +       TARGET_NM=/opt/gcc-7.3.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-nm \
> +       TARGET_RANLIB=/opt/gcc-7.3.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-ranlib && \
> +       make && \
> +       ./grub-mkimage -O arm-efi -o /opt/grub/grubarm.efi --prefix= -d \
> +       grub-core cat chain configfile echo efinet ext2 fat halt help linux \
> +       lsefisystab loadenv lvm minicmd normal part_msdos part_gpt reboot \
> +       search search_fs_file search_fs_uuid search_label serial sleep test \
> +       true && \
> +       rm -rf /tmp/grub
> +
>  RUN git clone git://git.qemu.org/qemu.git /tmp/qemu && \
>         cd /tmp/qemu && \
>         git submodule update --init dtc && \

Regards,
Bin