[U-Boot] [PATCH 5/6] riscv: dts: move out AE350 L2 node from cpus node

Rick Chen rickchen36 at gmail.com
Wed Jun 5 09:33:30 UTC 2019


Hi Bin

Bin Meng <bmeng.cn at gmail.com> 於 2019年6月4日 週二 上午10:48寫道:
>
> Hi Rick,
>
> On Tue, May 28, 2019 at 5:44 PM Andes <uboot at andestech.com> wrote:
> >
> > From: Rick Chen <rick at andestech.com>
> >
> > When L2 node exists inside cpus node, uclass_get_device
> > can not parse L2 node successfully. So move it outside
> > from cpus node.
> >
> > Also add tag-ram-ctl and data-ram-ctl attributes for
> > v5l2 cache controller driver. This can adjust timing
> > by requirement from dtb to improve performance.
> >
> > Signed-off-by: Rick Chen <rick at andestech.com>
> > Cc: Greentime Hu <greentime at andestech.com>
> > ---
> >  arch/riscv/dts/ae350_32.dts | 17 +++++++++++------
> >  arch/riscv/dts/ae350_64.dts | 17 +++++++++++------
> >  2 files changed, 22 insertions(+), 12 deletions(-)
> >
> > diff --git a/arch/riscv/dts/ae350_32.dts b/arch/riscv/dts/ae350_32.dts
> > index cb6ee13..83abfcb 100644
> > --- a/arch/riscv/dts/ae350_32.dts
> > +++ b/arch/riscv/dts/ae350_32.dts
> > @@ -62,13 +62,18 @@
> >                                 compatible = "riscv,cpu-intc";
> >                         };
> >                 };
> > +       };
> >
> > -               L2: l2-cache at e0500000 {
> > -                       compatible = "cache";
> > -                       cache-level = <2>;
> > -                       cache-size = <0x40000>;
> > -                       reg = <0x0 0xe0500000 0x0 0x40000>;
> > -               };
> > +       L2: l2-cache at e0500000 {
> > +               compatible = "cache";
>
> too generic compatible string (see my previous comments in patch [1/6])

Same replying  in patch [1/6]
>
> > +               cache-level = <2>;
> > +               cache-size = <0x40000>;
> > +               reg = <0xe0500000 0x40000>;
> > +               andes,inst-prefetch = <3>;
> > +               andes,data-prefetch = <3>;
> > +               // The value format is <XRAMOCTL XRAMICTL>
>
> nits: no //, use /* */

OK
I will use /* */ instead of //

>
> > +               andes,tag-ram-ctl = <0 0>;
> > +               andes,data-ram-ctl = <0 0>;
> >         };
> >
> >         memory at 0 {
> > diff --git a/arch/riscv/dts/ae350_64.dts b/arch/riscv/dts/ae350_64.dts
> > index 705491a..7009bdc 100644
> > --- a/arch/riscv/dts/ae350_64.dts
> > +++ b/arch/riscv/dts/ae350_64.dts
> > @@ -62,13 +62,18 @@
> >                                 compatible = "riscv,cpu-intc";
> >                         };
> >                 };
> > +       };
> >
> > -               L2: l2-cache at e0500000 {
> > -                       compatible = "cache";
> > -                       cache-level = <2>;
> > -                       cache-size = <0x40000>;
> > -                       reg = <0x0 0xe0500000 0x0 0x40000>;
> > -               };
> > +       L2: l2-cache at e0500000 {
> > +               compatible = "cache";
> > +               cache-level = <2>;
> > +               cache-size = <0x40000>;
> > +               reg = <0x0 0xe0500000 0x0 0x40000>;
> > +               andes,inst-prefetch = <3>;
> > +               andes,data-prefetch = <3>;
> > +               // The value format is <XRAMOCTL XRAMICTL>
>
> nits: no //, use /* */

I will use /* */ instead of //

Thanks
Rick

>
> > +               andes,tag-ram-ctl = <0 0>;
> > +               andes,data-ram-ctl = <0 0>;
> >         };
> >
> >         memory at 0 {
> > --
>
> Regards,
> Bin


More information about the U-Boot mailing list