[U-Boot] [PATCH] arm: imx8: factor out uart init code

[Anatolij Gustschin]

New imx8 boards started adding duplicated UART init code.
Factor out this to common function sc_pm_setup_uart().

Signed-off-by: Anatolij Gustschin <agust at denx.de>
Cc: Peng Fan <peng.fan at nxp.com>
---
 arch/arm/include/asm/arch-imx8/sys_proto.h |  2 ++
 arch/arm/mach-imx/imx8/Makefile            |  2 +-
 arch/arm/mach-imx/imx8/misc.c              | 26 ++++++++++++++++++++++
 board/freescale/imx8qm_mek/imx8qm_mek.c    | 16 +++----------
 board/freescale/imx8qxp_mek/imx8qxp_mek.c  | 16 +++----------
 5 files changed, 35 insertions(+), 27 deletions(-)
 create mode 100644 arch/arm/mach-imx/imx8/misc.c

diff --git a/arch/arm/include/asm/arch-imx8/sys_proto.h b/arch/arm/include/asm/arch-imx8/sys_proto.h
index 73ffaba7d5..3f5bbe9dcc 100644
--- a/arch/arm/include/asm/arch-imx8/sys_proto.h
+++ b/arch/arm/include/asm/arch-imx8/sys_proto.h
@@ -3,6 +3,7 @@
  * Copyright 2018 NXP
  */
 
+#include <asm/arch/sci/sci.h>
 #include <asm/mach-imx/sys_proto.h>
 #include <linux/types.h>
 
@@ -17,3 +18,4 @@ struct pass_over_info_t {
 
 enum boot_device get_boot_device(void);
 int print_bootinfo(void);
+int sc_pm_setup_uart(sc_rsrc_t uart_rsrc, sc_pm_clock_rate_t clk_rate);
diff --git a/arch/arm/mach-imx/imx8/Makefile b/arch/arm/mach-imx/imx8/Makefile
index 31ad169ccf..92b5c56acb 100644
--- a/arch/arm/mach-imx/imx8/Makefile
+++ b/arch/arm/mach-imx/imx8/Makefile
@@ -4,4 +4,4 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-obj-y += cpu.o iomux.o
+obj-y += cpu.o iomux.o misc.o
diff --git a/arch/arm/mach-imx/imx8/misc.c b/arch/arm/mach-imx/imx8/misc.c
new file mode 100644
index 0000000000..5fe23d2080
--- /dev/null
+++ b/arch/arm/mach-imx/imx8/misc.c
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <common.h>
+#include <asm/arch/sci/sci.h>
+
+int sc_pm_setup_uart(sc_rsrc_t uart_rsrc, sc_pm_clock_rate_t clk_rate)
+{
+	sc_pm_clock_rate_t rate = clk_rate;
+	int ret;
+
+	/* Power up UARTn */
+	ret = sc_pm_set_resource_power_mode(-1, uart_rsrc, SC_PM_PW_MODE_ON);
+	if (ret)
+		return ret;
+
+	/* Set UARTn clock root to 'rate' MHz */
+	ret = sc_pm_set_clock_rate(-1, uart_rsrc, 2, &rate);
+	if (ret)
+		return ret;
+
+	/* Enable UARTn clock root */
+	ret = sc_pm_clock_enable(-1, uart_rsrc, 2, true, false);
+	if (ret)
+		return ret;
+
+	return 0;
+}
diff --git a/board/freescale/imx8qm_mek/imx8qm_mek.c b/board/freescale/imx8qm_mek/imx8qm_mek.c
index e69efc4dd6..249c29e0f2 100644
--- a/board/freescale/imx8qm_mek/imx8qm_mek.c
+++ b/board/freescale/imx8qm_mek/imx8qm_mek.c
@@ -34,21 +34,11 @@ static void setup_iomux_uart(void)
 
 int board_early_init_f(void)
 {
+	sc_pm_clock_rate_t rate = SC_80MHZ;
 	int ret;
-	/* Set UART0 clock root to 80 MHz */
-	sc_pm_clock_rate_t rate = 80000000;
-
-	/* Power up UART0 */
-	ret = sc_pm_set_resource_power_mode(-1, SC_R_UART_0, SC_PM_PW_MODE_ON);
-	if (ret)
-		return ret;
 
-	ret = sc_pm_set_clock_rate(-1, SC_R_UART_0, 2, &rate);
-	if (ret)
-		return ret;
-
-	/* Enable UART0 clock root */
-	ret = sc_pm_clock_enable(-1, SC_R_UART_0, 2, true, false);
+	/* Set UART0 clock root to 80 MHz */
+	ret = sc_pm_setup_uart(SC_R_UART_0, rate);
 	if (ret)
 		return ret;
 
diff --git a/board/freescale/imx8qxp_mek/imx8qxp_mek.c b/board/freescale/imx8qxp_mek/imx8qxp_mek.c
index 63cd605b6a..1038f26d69 100644
--- a/board/freescale/imx8qxp_mek/imx8qxp_mek.c
+++ b/board/freescale/imx8qxp_mek/imx8qxp_mek.c
@@ -40,21 +40,11 @@ static void setup_iomux_uart(void)
 
 int board_early_init_f(void)
 {
+	sc_pm_clock_rate_t rate = SC_80MHZ;
 	int ret;
-	/* Set UART0 clock root to 80 MHz */
-	sc_pm_clock_rate_t rate = 80000000;
-
-	/* Power up UART0 */
-	ret = sc_pm_set_resource_power_mode(-1, SC_R_UART_0, SC_PM_PW_MODE_ON);
-	if (ret)
-		return ret;
 
-	ret = sc_pm_set_clock_rate(-1, SC_R_UART_0, 2, &rate);
-	if (ret)
-		return ret;
-
-	/* Enable UART0 clock root */
-	ret = sc_pm_clock_enable(-1, SC_R_UART_0, 2, true, false);
+	/* Set UART0 clock root to 80 MHz */
+	ret = sc_pm_setup_uart(SC_R_UART_0, rate);
 	if (ret)
 		return ret;
 
-- 
2.17.1