[U-Boot] [PATCH] arm: imx8: factor out uart init code
Peng Fan
peng.fan at nxp.com
Tue Jun 11 08:35:09 UTC 2019
> Subject: [PATCH] arm: imx8: factor out uart init code
>
> New imx8 boards started adding duplicated UART init code.
> Factor out this to common function sc_pm_setup_uart().
>
> Signed-off-by: Anatolij Gustschin <agust at denx.de>
> Cc: Peng Fan <peng.fan at nxp.com>
> ---
> arch/arm/include/asm/arch-imx8/sys_proto.h | 2 ++
> arch/arm/mach-imx/imx8/Makefile | 2 +-
> arch/arm/mach-imx/imx8/misc.c | 26
> ++++++++++++++++++++++
> board/freescale/imx8qm_mek/imx8qm_mek.c | 16 +++----------
> board/freescale/imx8qxp_mek/imx8qxp_mek.c | 16 +++----------
> 5 files changed, 35 insertions(+), 27 deletions(-) create mode 100644
> arch/arm/mach-imx/imx8/misc.c
>
> diff --git a/arch/arm/include/asm/arch-imx8/sys_proto.h
> b/arch/arm/include/asm/arch-imx8/sys_proto.h
> index 73ffaba7d5..3f5bbe9dcc 100644
> --- a/arch/arm/include/asm/arch-imx8/sys_proto.h
> +++ b/arch/arm/include/asm/arch-imx8/sys_proto.h
> @@ -3,6 +3,7 @@
> * Copyright 2018 NXP
> */
>
> +#include <asm/arch/sci/sci.h>
> #include <asm/mach-imx/sys_proto.h>
> #include <linux/types.h>
>
> @@ -17,3 +18,4 @@ struct pass_over_info_t {
>
> enum boot_device get_boot_device(void); int print_bootinfo(void);
> +int sc_pm_setup_uart(sc_rsrc_t uart_rsrc, sc_pm_clock_rate_t clk_rate);
> diff --git a/arch/arm/mach-imx/imx8/Makefile
> b/arch/arm/mach-imx/imx8/Makefile index 31ad169ccf..92b5c56acb 100644
> --- a/arch/arm/mach-imx/imx8/Makefile
> +++ b/arch/arm/mach-imx/imx8/Makefile
> @@ -4,4 +4,4 @@
> # SPDX-License-Identifier: GPL-2.0+
> #
>
> -obj-y += cpu.o iomux.o
> +obj-y += cpu.o iomux.o misc.o
> diff --git a/arch/arm/mach-imx/imx8/misc.c
> b/arch/arm/mach-imx/imx8/misc.c new file mode 100644 index
> 0000000000..5fe23d2080
> --- /dev/null
> +++ b/arch/arm/mach-imx/imx8/misc.c
> @@ -0,0 +1,26 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +#include <common.h>
> +#include <asm/arch/sci/sci.h>
> +
> +int sc_pm_setup_uart(sc_rsrc_t uart_rsrc, sc_pm_clock_rate_t clk_rate)
> +{
> + sc_pm_clock_rate_t rate = clk_rate;
> + int ret;
> +
> + /* Power up UARTn */
> + ret = sc_pm_set_resource_power_mode(-1, uart_rsrc,
> SC_PM_PW_MODE_ON);
> + if (ret)
> + return ret;
> +
> + /* Set UARTn clock root to 'rate' MHz */
> + ret = sc_pm_set_clock_rate(-1, uart_rsrc, 2, &rate);
> + if (ret)
> + return ret;
> +
> + /* Enable UARTn clock root */
> + ret = sc_pm_clock_enable(-1, uart_rsrc, 2, true, false);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> diff --git a/board/freescale/imx8qm_mek/imx8qm_mek.c
> b/board/freescale/imx8qm_mek/imx8qm_mek.c
> index e69efc4dd6..249c29e0f2 100644
> --- a/board/freescale/imx8qm_mek/imx8qm_mek.c
> +++ b/board/freescale/imx8qm_mek/imx8qm_mek.c
> @@ -34,21 +34,11 @@ static void setup_iomux_uart(void)
>
> int board_early_init_f(void)
> {
> + sc_pm_clock_rate_t rate = SC_80MHZ;
> int ret;
> - /* Set UART0 clock root to 80 MHz */
> - sc_pm_clock_rate_t rate = 80000000;
> -
> - /* Power up UART0 */
> - ret = sc_pm_set_resource_power_mode(-1, SC_R_UART_0,
> SC_PM_PW_MODE_ON);
> - if (ret)
> - return ret;
>
> - ret = sc_pm_set_clock_rate(-1, SC_R_UART_0, 2, &rate);
> - if (ret)
> - return ret;
> -
> - /* Enable UART0 clock root */
> - ret = sc_pm_clock_enable(-1, SC_R_UART_0, 2, true, false);
> + /* Set UART0 clock root to 80 MHz */
> + ret = sc_pm_setup_uart(SC_R_UART_0, rate);
> if (ret)
> return ret;
>
> diff --git a/board/freescale/imx8qxp_mek/imx8qxp_mek.c
> b/board/freescale/imx8qxp_mek/imx8qxp_mek.c
> index 63cd605b6a..1038f26d69 100644
> --- a/board/freescale/imx8qxp_mek/imx8qxp_mek.c
> +++ b/board/freescale/imx8qxp_mek/imx8qxp_mek.c
> @@ -40,21 +40,11 @@ static void setup_iomux_uart(void)
>
> int board_early_init_f(void)
> {
> + sc_pm_clock_rate_t rate = SC_80MHZ;
> int ret;
> - /* Set UART0 clock root to 80 MHz */
> - sc_pm_clock_rate_t rate = 80000000;
> -
> - /* Power up UART0 */
> - ret = sc_pm_set_resource_power_mode(-1, SC_R_UART_0,
> SC_PM_PW_MODE_ON);
> - if (ret)
> - return ret;
>
> - ret = sc_pm_set_clock_rate(-1, SC_R_UART_0, 2, &rate);
> - if (ret)
> - return ret;
> -
> - /* Enable UART0 clock root */
> - ret = sc_pm_clock_enable(-1, SC_R_UART_0, 2, true, false);
> + /* Set UART0 clock root to 80 MHz */
> + ret = sc_pm_setup_uart(SC_R_UART_0, rate);
> if (ret)
> return ret;
>
Reviewed-by: Peng Fan <peng.fan at nxp.com>
> --
> 2.17.1
More information about the U-Boot
mailing list