[U-Boot] [PATCH v1 05/11] ARM: display5: Increase the pre-relocation malloc pool size to 4KiB
Peng Fan
peng.fan at nxp.com
Mon Jun 10 01:41:14 UTC 2019
> Subject: [PATCH v1 05/11] ARM: display5: Increase the pre-relocation malloc
> pool size to 4KiB
>
> Porting more DTS code from Linux kernel for display5 board required increase
> of pre-relocation malloc pool size in U-Boot proper.
>
> The early malloc memory is necessary for handling parsing and setup of e.g.
> serial port device (and all its ancestors in DT tree).
>
> Signed-off-by: Lukasz Majewski <lukma at denx.de>
> ---
>
> configs/display5_defconfig | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/configs/display5_defconfig b/configs/display5_defconfig index
> 3b793f4500..0ef56024e9 100644
> --- a/configs/display5_defconfig
> +++ b/configs/display5_defconfig
> @@ -4,16 +4,19 @@ CONFIG_SYS_TEXT_BASE=0x17800000
> CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y
> CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_SYS_MALLOC_F_LEN=0x1000
> CONFIG_MX6_DDRCAL=y
> CONFIG_TARGET_DISPLAY5=y
> CONFIG_SPL_MMC_SUPPORT=y
> CONFIG_SPL_SERIAL_SUPPORT=y
> +CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
> CONFIG_NR_DRAM_BANKS=1
> CONFIG_SPL=y
> CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
> CONFIG_SYS_BOOTCOUNT_ADDR=0x020CC068
> CONFIG_SPL_SPI_FLASH_SUPPORT=y
> CONFIG_SPL_SPI_SUPPORT=y
> +CONFIG_TPL_SYS_MALLOC_F_LEN=0x400
Acked-by: Peng Fan <peng.fan at nxp.com>
Just a question, TPL is enabled for this platform?
> CONFIG_FIT=y
> CONFIG_SPL_LOAD_FIT=y
> CONFIG_OF_BOARD_SETUP=y
> --
> 2.11.0
More information about the U-Boot
mailing list