[U-Boot] [PATCH v1 05/11] ARM: display5: Increase the pre-relocation malloc pool size to 4KiB

[Lukasz Majewski]

Hi Peng,

> > Subject: [PATCH v1 05/11] ARM: display5: Increase the
> > pre-relocation malloc pool size to 4KiB
> > 
> > Porting more DTS code from Linux kernel for display5 board required
> > increase of pre-relocation malloc pool size in U-Boot proper.
> > 
> > The early malloc memory is necessary for handling parsing and setup
> > of e.g. serial port device (and all its ancestors in DT tree).
> > 
> > Signed-off-by: Lukasz Majewski <lukma at denx.de>
> > ---
> > 
> >  configs/display5_defconfig | 3 +++
> >  1 file changed, 3 insertions(+)
> > 
> > diff --git a/configs/display5_defconfig
> > b/configs/display5_defconfig index 3b793f4500..0ef56024e9 100644
> > --- a/configs/display5_defconfig
> > +++ b/configs/display5_defconfig
> > @@ -4,16 +4,19 @@ CONFIG_SYS_TEXT_BASE=0x17800000
> > CONFIG_SPL_GPIO_SUPPORT=y  CONFIG_SPL_LIBCOMMON_SUPPORT=y
> > CONFIG_SPL_LIBGENERIC_SUPPORT=y
> > +CONFIG_SYS_MALLOC_F_LEN=0x1000
> >  CONFIG_MX6_DDRCAL=y
> >  CONFIG_TARGET_DISPLAY5=y
> >  CONFIG_SPL_MMC_SUPPORT=y
> >  CONFIG_SPL_SERIAL_SUPPORT=y
> > +CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
> >  CONFIG_NR_DRAM_BANKS=1
> >  CONFIG_SPL=y
> >  CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
> >  CONFIG_SYS_BOOTCOUNT_ADDR=0x020CC068
> >  CONFIG_SPL_SPI_FLASH_SUPPORT=y
> >  CONFIG_SPL_SPI_SUPPORT=y
> > +CONFIG_TPL_SYS_MALLOC_F_LEN=0x400  
> 
> Acked-by: Peng Fan <peng.fan at nxp.com>
> Just a question, TPL is enabled for this platform?

No, display5 is not using TPL. This CONFIG_TPL_SYS_MALLOC_F_LEN seems
to be enabled by default when setting SPL counterpart.

> 
> >  CONFIG_FIT=y
> >  CONFIG_SPL_LOAD_FIT=y
> >  CONFIG_OF_BOARD_SETUP=y
> > --
> > 2.11.0  
> 




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190610/486d339d/attachment.sig>