[U-Boot] [U-Boot, 1/1] configs: tinker-rk3288 disable CONFIG_SPL_I2C_SUPPORT
Heinrich Schuchardt
xypron.debian at gmx.de
Tue Jun 11 10:40:02 UTC 2019
On 4/21/19 6:57 PM, Philipp Tomsich wrote:
>> The SPL for the Tinker Board has to fit into 32 KiB. Currently this limit
>> is exceeded.
>>
>> CONFIG_SPL_I2C_SUPPORT is not needed to move to main U-Boot. So let's
>> disable it.
>>
>> Suggested-by: David Wu <david.wu at rock-chips.com>
>> Signed-off-by: Heinrich Schuchardt <xypron.glpk at gmx.de>
>> Reviewed-by: David Wu <david.wu at rock-chips.com>
>> ---
>> This solves only one of the problems with the boards in v2019.04.
>> The next problem is that reading the environment from MMC fails.
>>
>> The patch
>> [PATCH v3 1/1] configs: rk3288: Tinker Board SPL file must fit into 32 KiB
>> https://lists.denx.de/pipermail/u-boot/2019-February/358883.html
>> makes the problem visibe.
>> ---
>> configs/tinker-rk3288_defconfig | 1 -
>> 1 file changed, 1 deletion(-)
>>
>
> Reviewed-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
Hello Tom,
could you, please, merge this patch that has been lingering since
February to fix the build issue for the TinkerBoard:
https://lists.denx.de/pipermail/u-boot/2019-February/360367.html
https://patchwork.ozlabs.org/patch/1049112/
You will have to rebase the patch:
CONFIG_SPL_TEXT_BASE=0xff704000 <<<< change this line
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
-CONFIG_SPL_I2C_SUPPORT=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
Best regards
Heinrich
More information about the U-Boot
mailing list