[U-Boot] [PATCH 1/1] configs: tinker-rk3288 disable CONFIG_SPL_I2C_SUPPORT

[Heinrich Schuchardt]

The SPL for the Tinker Board has to fit into 32 KiB. Currently this limit
is exceeded.

CONFIG_SPL_I2C_SUPPORT is not needed to move to main U-Boot. So let's
disable it.

Suggested-by: David Wu <david.wu at rock-chips.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk at gmx.de>
---
This solves only one of the problems with the boards in v2019.04.
The next problem is that reading the environment from MMC fails.

The patch
[PATCH v3 1/1] configs: rk3288: Tinker Board SPL file must fit into 32 KiB
https://lists.denx.de/pipermail/u-boot/2019-February/358883.html
makes the problem visibe.
---
 configs/tinker-rk3288_defconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/configs/tinker-rk3288_defconfig b/configs/tinker-rk3288_defconfig
index 68adf7635bf..03a7f81d63d 100644
--- a/configs/tinker-rk3288_defconfig
+++ b/configs/tinker-rk3288_defconfig
@@ -18,7 +18,6 @@ CONFIG_DEFAULT_FDT_FILE="rk3288-tinker.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
-CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
-- 
2.20.1