February 2019 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Fri Feb 1 00:01:05 UTC 2019
Ending: Thu Feb 28 23:59:12 UTC 2019
Messages: 3227

• [U-Boot] [PATCH 1/3] x86: Change 4-level page table base address to low memory   Alexander Graf
  • [U-Boot] [PATCH 1/3] x86: Change 4-level page table base address to low memory   Bin Meng
    • [U-Boot] [PATCH 1/3] x86: Change 4-level page table base address to low memory   Alexander Graf
  • [U-Boot] [PATCH 1/3] x86: Change 4-level page table base address to low memory   Simon Glass
    • [U-Boot] [PATCH 1/3] x86: Change 4-level page table base address to low memory   Heinrich Schuchardt
      • [U-Boot] [PATCH 1/3] x86: Change 4-level page table base address to low memory   Bin Meng
• [U-Boot] [PATCH v6.2] cmd: env: add "-e" option for handling UEFI variables   AKASHI Takahiro
  • [U-Boot] [PATCH v6.2] cmd: env: add "-e" option for handling UEFI variables   Heinrich Schuchardt
    • [U-Boot] [PATCH v6.2] cmd: env: add "-e" option for handling UEFI variables   AKASHI Takahiro
• [U-Boot] [U-Boot, 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now   andy.yan at rock-chips.com
  • [U-Boot] [U-Boot, 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now   Philipp Tomsich
    • [U-Boot] [U-Boot, 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now   Philipp Tomsich
• [U-Boot] [PATCH v3] net: phy: add TSE PCS support to dwmac-socfpga   Ooi, Joyce
  • [U-Boot] [PATCH v3] net: phy: add TSE PCS support to dwmac-socfpga   Marek Vasut
    • [U-Boot] [PATCH v3] net: phy: add TSE PCS support to dwmac-socfpga   Ooi, Joyce
      • [U-Boot] [PATCH v3] net: phy: add TSE PCS support to dwmac-socfpga   Marek Vasut
• [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Chee, Tien Fong
  • [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Marek Vasut
    • [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Chee, Tien Fong
      • [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Dalon L Westergreen
      • [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Dalon L Westergreen
      • [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Chee, Tien Fong
      • [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Marek Vasut
      • [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Chee, Tien Fong
      • [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Marek Vasut
      • [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Dalon L Westergreen
      • [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Chee, Tien Fong
      • [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Westergreen, Dalon
      • [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Chee, Tien Fong
      • [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Marek Vasut
      • [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Chee, Tien Fong
      • [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Marek Vasut
      • [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Dalon L Westergreen
      • [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Chee, Tien Fong
• [U-Boot] [PATCH v2 2/2] fs: fat: Reduce default max clustersize 64KiB from malloc pool   Chee, Tien Fong
• [U-Boot] [PATCH v7 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   Chee, Tien Fong
  • [U-Boot] [PATCH v7 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   Marek Vasut
    • [U-Boot] [PATCH v7 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   Chee, Tien Fong
      • [U-Boot] [PATCH v7 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   Marek Vasut
      • [U-Boot] [PATCH v7 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   Chee, Tien Fong
      • [U-Boot] [PATCH v7 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   Marek Vasut
      • [U-Boot] [PATCH v7 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   Chee, Tien Fong
• [U-Boot] [PATCH v7 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   Chee, Tien Fong
  • [U-Boot] [PATCH v7 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   Marek Vasut
    • [U-Boot] [PATCH v7 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   Chee, Tien Fong
    • [U-Boot] [PATCH v7 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   Chee, Tien Fong
      • [U-Boot] [PATCH v7 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   Marek Vasut
      • [U-Boot] [PATCH v7 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   Chee, Tien Fong
      • [U-Boot] [PATCH v7 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   Marek Vasut
  • [U-Boot] [PATCH v7 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   Dalon L Westergreen
    • [U-Boot] [PATCH v7 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   Chee, Tien Fong
      • [U-Boot] [PATCH v7 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   Marek Vasut
      • [U-Boot] [PATCH v7 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   Chee, Tien Fong
• [U-Boot] [PATCH v7 4/7] ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK   Chee, Tien Fong
• [U-Boot] [PATCH v7 7/7] ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL   Chee, Tien Fong
• [U-Boot] [PATCH] configs: fsl: move DDR specific defines to Kconfig   Rajesh Bhagat
  • [U-Boot] [PATCH] configs: fsl: move DDR specific defines to Kconfig   York Sun
• [U-Boot] [RFC 2/3] efi_loader: associate BLK/PARTITION device to efi_disk   AKASHI Takahiro
  • [U-Boot] [RFC 2/3] efi_loader: associate BLK/PARTITION device to efi_disk   Simon Glass
    • [U-Boot] [RFC 2/3] efi_loader: associate BLK/PARTITION device to efi_disk   AKASHI Takahiro
      • [U-Boot] [RFC 2/3] efi_loader: associate BLK/PARTITION device to efi_disk   AKASHI Takahiro
• [U-Boot] imx8mq-evk: Outbound network packets lost   Chris Spencer
  • [U-Boot] imx8mq-evk: Outbound network packets lost   Sergey Kubushyn
    • [U-Boot] imx8mq-evk: Outbound network packets lost   Chris Spencer
      • [U-Boot] imx8mq-evk: Outbound network packets lost   Sergey Kubushyn
• [U-Boot] [PATCH 2/4 v3] pci: pci_mvebu: Add DM_PCI support and move CONFIG_PCI_MVEBU to defconfig   Stefan Roese
  • [U-Boot] [PATCH 2/4 v3] pci: pci_mvebu: Add DM_PCI support and move CONFIG_PCI_MVEBU to defconfig   Stefan Roese
  • [U-Boot] [PATCH 2/4 v3] pci: pci_mvebu: Add DM_PCI support and move CONFIG_PCI_MVEBU to defconfig   Bin Meng
    • [U-Boot] [PATCH 2/4 v3] pci: pci_mvebu: Add DM_PCI support and move CONFIG_PCI_MVEBU to defconfig   Stefan Roese
• [U-Boot] [PATCH v2 1/2] fs: fat: dynamically allocate memory for temporary buffer   Chee, Tien Fong
  • [U-Boot] [PATCH v2 1/2] fs: fat: dynamically allocate memory for temporary buffer   Marek Vasut
    • [U-Boot] [PATCH v2 1/2] fs: fat: dynamically allocate memory for temporary buffer   Chee, Tien Fong
      • [U-Boot] [PATCH v2 1/2] fs: fat: dynamically allocate memory for temporary buffer   Marek Vasut
• [U-Boot] [PATCH v3 00/20] SF: Migrate to Linux SPI NOR framework   Vignesh R
  • [U-Boot] [PATCH v3 00/20] SF: Migrate to Linux SPI NOR framework   Jagan Teki
• [U-Boot] [U-Boot, 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Kever Yang
  • [U-Boot] [U-Boot, 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Philipp Tomsich
    • [U-Boot] [U-Boot, 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Philipp Tomsich
      • [U-Boot] [U-Boot, 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Simon Glass
      • [U-Boot] [U-Boot, 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Andy Yan
      • [U-Boot] [U-Boot, 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Simon Glass
• [U-Boot] [PATCH v2 01/21] net: FEC: Add compatible for vybrid (vf610) to reuse fec_mxc.c driver   Stefan Agner
• [U-Boot] [PATCH v2 02/21] net: Kconfig: FEC: Add dependency on VF610   Stefan Agner
• [U-Boot] [u-boot] [PATCH] pci: layerscape: add option to statically allocate PCI StreamIDs   Pankaj Bansal
• [U-Boot] [PATCH] arm: dts: am33xx: add u-boot, dm-spl to ocp bus   Felix Brack
  • [U-Boot] [PATCH] arm: dts: am33xx: add u-boot, dm-spl to ocp bus   Hannes Schmelzer
    • [U-Boot] [PATCH] arm: dts: am33xx: add u-boot, dm-spl to ocp bus   Tom Rini
    • [U-Boot] [PATCH] arm: dts: am33xx: add u-boot, dm-spl to ocp bus   Felix Brack
• [U-Boot] [PATCH v2 03/21] vybrid: ddr: Extend vf610-pinfunc.h with DDR pads definitions   Stefan Agner
• [U-Boot] [PATCH] MSCC: Jaguar2 enable debug uart   Daniel Schwierzeck
• [U-Boot] [PATCH] MSCC: Fix Jaguar2 board detection.   Daniel Schwierzeck
• [U-Boot] [PATCH] mips: mt76xx: Use correct timer frequency   Daniel Schwierzeck
• [U-Boot] [PATCH v2 08/21] ARM: DTS: vybrid: Update vf.dtsi file to descibe more vf610 hardware   Stefan Agner
• [U-Boot] [PATCH v3 0/8] Add network support for Luton SoCs   Daniel Schwierzeck
• [U-Boot] [PATCH v2 04/21] vybrid: clock: Provide enable_i2c_clk() function for Vybrid   Stefan Agner
  • [U-Boot] [PATCH v2 04/21] vybrid: clock: Provide enable_i2c_clk() function for Vybrid   Lukasz Majewski
    • [U-Boot] [PATCH v2 04/21] vybrid: clock: Provide enable_i2c_clk() function for Vybrid   Stefan Agner
      • [U-Boot] [PATCH v2 04/21] vybrid: clock: Provide enable_i2c_clk() function for Vybrid   Lukasz Majewski
• [U-Boot] [PATCH v2 00/21] imx: vybrid: Update BK4 and PCM052 boards to only use DM/DTS   Stefan Agner
• [U-Boot] Please pull u-boot-video   Tom Rini
  • [U-Boot] Please pull u-boot-video   Anatolij Gustschin
    • [U-Boot] Please pull u-boot-video   Tom Rini
• [U-Boot] [PATCH 0/2] Load splash from FIT image (internal, external, offset)   Mark Jonas
  • [U-Boot] [PATCH 1/2] splash: Use splashfile instead of location->name   Mark Jonas
    • [U-Boot] [PATCH 1/2] splash: Use splashfile instead of location->name   Simon Glass
    • [U-Boot] [PATCH 1/2] splash: Use splashfile instead of location->name   Jonas Mark (BT-FIR/ENG1)
  • [U-Boot] [PATCH 2/2] splash: Load internal and external data from FIT   Mark Jonas
    • [U-Boot] [PATCH 2/2] splash: Load internal and external data from FIT   Simon Glass
      • [U-Boot] [PATCH 2/2] splash: Load internal and external data from FIT   Jonas Mark (BT-FIR/ENG1)
• [U-Boot] [PATCH v2 0/7] Add support for symlink creation in EXT4   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v2 2/7] test: fs: disable the metadata checksums on ext4 filesystems   Jean-Jacques Hiblot
    • [U-Boot] [PATCH v2 2/7] test: fs: disable the metadata checksums on ext4 filesystems   Tom Rini
  • [U-Boot] [PATCH v2 3/7] test: fs: run fsck after on fs image after the tests are run   Jean-Jacques Hiblot
    • [U-Boot] [PATCH v2 3/7] test: fs: run fsck after on fs image after the tests are run   Tom Rini
      • [U-Boot] [PATCH v2 3/7] test: fs: run fsck after on fs image after the tests are run   Jean-Jacques Hiblot
      • [U-Boot] [PATCH v2 3/7] test: fs: run fsck after on fs image after the tests are run   Tom Rini
      • [U-Boot] [PATCH v2 3/7] test: fs: run fsck after on fs image after the tests are run   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v2 4/7] fs: ext4: constify the buffer passed to write functions   Jean-Jacques Hiblot
    • [U-Boot] [PATCH v2 4/7] fs: ext4: constify the buffer passed to write functions   Tom Rini
  • [U-Boot] [PATCH v2 5/7] fs: ext4: Add support for the creation of symbolic links   Jean-Jacques Hiblot
    • [U-Boot] [PATCH v2 5/7] fs: ext4: Add support for the creation of symbolic links   Tom Rini
  • [U-Boot] [PATCH v2 6/7] fs: Add a new command to create symbolic links   Jean-Jacques Hiblot
    • [U-Boot] [PATCH v2 6/7] fs: Add a new command to create symbolic links   Tom Rini
  • [U-Boot] [PATCH v2 7/7] test: fs: Added tests for symlinks   Jean-Jacques Hiblot
    • [U-Boot] [PATCH v2 7/7] test: fs: Added tests for symlinks   Tom Rini
• [U-Boot] [PATCH v2 1/7] fs: ext4: do not allow writes if metadata checksum is active   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v2 1/7] fs: ext4: do not allow writes if metadata checksum is active   Tom Rini
  • [U-Boot] [PATCH v2 1/7] fs: ext4: do not allow writes if metadata checksum is active   Tom Rini
    • [U-Boot] [PATCH v2 1/7] fs: ext4: do not allow writes if metadata checksum is active   Jean-Jacques Hiblot
• [U-Boot] [PATCH] board: raspberrypi: add serial and revision to the device tree   Gerasimov, Anton
• [U-Boot] [PATCH v3 0/2] While converting SATA on Apalis iMX6 to use driver model I noticed it   Marcel Ziswiler
  • [U-Boot] [PATCH v3 1/2] dm: device: fail uclass_find_first_device() if list_empty   Marcel Ziswiler
    • [U-Boot] [U-Boot, v3, 1/2] dm: device: fail uclass_find_first_device() if list_empty   Tom Rini
  • [U-Boot] [PATCH v3 2/2] cmd: sata: add null pointer check for dev   Marcel Ziswiler
    • [U-Boot] [U-Boot, v3, 2/2] cmd: sata: add null pointer check for dev   Tom Rini
• [U-Boot] [PATCH v1 0/3] imx: cpu.c, serial_mxc, dts fixes/improvements   Marcel Ziswiler
  • [U-Boot] [PATCH v1 2/3] imx: serial_mxc: disable ri and dcd irq in dte mode   Marcel Ziswiler
    • [U-Boot] [PATCH v1 2/3] imx: serial_mxc: disable ri and dcd irq in dte mode   Stefano Babic
    • [U-Boot] [U-Boot, v1, 2/3] imx: serial_mxc: disable ri and dcd irq in dte mode   sbabic at denx.de
  • [U-Boot] [PATCH v1 3/3] imx: cpu.c: give access to reset cause in spl   Marcel Ziswiler
    • [U-Boot] [U-Boot, v1, 3/3] imx: cpu.c: give access to reset cause in spl   sbabic at denx.de
• [U-Boot] [PATCH v1 1/3] ARM: dts: i.MX6Q, i.MX6QDL: fix address/size-cells warnings   Marcel Ziswiler
  • [U-Boot] [U-Boot, v1, 1/3] ARM: dts: i.MX6Q, i.MX6QDL: fix address/size-cells warnings   sbabic at denx.de
• [U-Boot] [PATCH 1/5] driver: net: ti: cpsw-mdio: use phys_addr_t for mdio_base addr   Tom Rini
• [U-Boot] [PATCH 2/5] net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driver   Tom Rini
• [U-Boot] [PATCH 3/5] arm64: dts: ti: k3-am65: add mcu cpsw node   Tom Rini
• [U-Boot] [PATCH 4/5] arm64: dts: k3-am654-base-board: add mcu cpsw nuss pinmux and phy defs   Tom Rini
• [U-Boot] [PATCH 5/5] configs: am65x_evm_a53: enable networking   Tom Rini
• [U-Boot] [PATCH v1 0/3] toradex: common: fix/improve config block handling   Marcel Ziswiler
  • [U-Boot] [PATCH v1 3/3] tdx-cfg-block: fix off by one issue   Marcel Ziswiler
• [U-Boot] [PATCH v1 1/3] toradex: configblock: add an -y parameter to 'cfgblock create’   Marcel Ziswiler
• [U-Boot] [PATCH v1 2/3] toradex: common: unify behaviour when config block is missing   Marcel Ziswiler
• [U-Boot] [PATCH v3 2/7] soc: ti: k3: add navss ringacc driver   Tom Rini
• [U-Boot] [PATCH v3 3/7] soc: ti: k3: add CPPI5 description and helpers   Tom Rini
• [U-Boot] [PATCH v3 4/7] dma: ti: add driver to K3 UDMA   Tom Rini
• [U-Boot] [PATCH v3 5/7] soc: keystone: Merge into TI specific directory   Tom Rini
• [U-Boot] [PATCH v3 6/7] arm64: dts: ti: k3-am65: add mcu navss nodes   Tom Rini
• [U-Boot] [PATCH v3 7/7] configs: am65x_evm_a53: Enable DMA related configs   Tom Rini
• [U-Boot] [PATCH v3 16/20] mtd: spi: Add lightweight SPI flash stack for SPL   Jagan Teki
  • [U-Boot] [PATCH v3 16/20] mtd: spi: Add lightweight SPI flash stack for SPL   Vignesh R
    • [U-Boot] [PATCH v3 16/20] mtd: spi: Add lightweight SPI flash stack for SPL   Jagan Teki
• [U-Boot] [PATCH v3 19/20] configs: Don't use SPI_FLASH_BAR as default   Jagan Teki
  • [U-Boot] [PATCH v3 19/20] configs: Don't use SPI_FLASH_BAR as default   Vignesh R
    • [U-Boot] [PATCH v3 19/20] configs: Don't use SPI_FLASH_BAR as default   Jagan Teki
• [U-Boot] [PATCH 1/2] rockchip: rk3399-puma: enable SPL_ATF_NO_PLATFORM_PARAM   Philipp Tomsich
  • [U-Boot] [PATCH 2/2] rockchip: rk3399: spl: ensure that debug_uart_init is called   Philipp Tomsich
    • [U-Boot] [PATCH 2/2] rockchip: rk3399: spl: ensure that debug_uart_init is called   Philipp Tomsich
  • [U-Boot] [PATCH 1/2] rockchip: rk3399-puma: enable SPL_ATF_NO_PLATFORM_PARAM   Philipp Tomsich
• [U-Boot] [PATCH v1 00/23] apalis imx6 fixes, device tree enablement and driver model conversion   Marcel Ziswiler
  • [U-Boot] [PATCH v1 01/23] apalis_imx6: get rid of obsolete nospl configurations   Marcel Ziswiler
  • [U-Boot] [PATCH v1 16/23] apalis_imx6: unify sd/mmc drive strength with linux kernel settings   Marcel Ziswiler
  • [U-Boot] [PATCH v1 19/23] apalis_imx6: revert fuse value set in mfgr_fuse   Marcel Ziswiler
  • [U-Boot] [PATCH v1 20/23] configs: apalis_imx6: Use ext4 file system by default   Marcel Ziswiler
  • [U-Boot] [PATCH v1 21/23] apalis_imx6: use SDP if USB serial downloader has been used   Marcel Ziswiler
  • [U-Boot] [PATCH v1 22/23] apalis_imx6: switch to zimage   Marcel Ziswiler
  • [U-Boot] [PATCH v1 23/23] board: apalis_imx6: check for and report ecc errors in fuses   Marcel Ziswiler
• [U-Boot] [PATCH v1 02/23] apalis_imx6: use distro defaults   Marcel Ziswiler
• [U-Boot] [PATCH v1 03/23] apalis_imx6: move console in env and dfu mmc from header file to defconfig   Marcel Ziswiler
• [U-Boot] [PATCH v1 04/23] apalis_imx6: enable fit image, gpt, imx thermal, efi loader support   Marcel Ziswiler
• [U-Boot] [PATCH v1 05/23] apalis_imx6: remove obsolete USB_GADGET_MASS_STORAGE configuration   Marcel Ziswiler
• [U-Boot] [PATCH v1 06/23] apalis_imx6: migrate to using device tree   Marcel Ziswiler
• [U-Boot] [PATCH v1 07/23] apalis_imx6: clean-up and migrate gpios to using driver model   Marcel Ziswiler
• [U-Boot] [PATCH v1 08/23] apalis_imx6: enable pin control driver   Marcel Ziswiler
• [U-Boot] [PATCH v1 09/23] apalis_imx6: migrate i2c to using driver model   Marcel Ziswiler
• [U-Boot] [PATCH v1 10/23] apalis_imx6: migrate pmic and regulator to using driver model   Marcel Ziswiler
• [U-Boot] [PATCH v1 11/23] apalis_imx6: migrate mmc and sata to using driver model   Marcel Ziswiler
  • [U-Boot] [PATCH v1 11/23] apalis_imx6: migrate mmc and sata to using driver model   Soeren Moch
• [U-Boot] [PATCH v1 12/23] apalis_imx6: migrate usb to using driver model   Marcel Ziswiler
• [U-Boot] [PATCH v1 13/23] apalis_imx6: drop CONFIG_OF_SYSTEM_SETUP   Marcel Ziswiler
• [U-Boot] [PATCH v1 14/23] apalis_imx6: add distroboot support   Marcel Ziswiler
• [U-Boot] [PATCH v1 15/23] apalis_imx6: use both sd/mmc interfaces for setsdupdate   Marcel Ziswiler
• [U-Boot] [PATCH v1 17/23] apalis_imx6: pf0100: reorder and cleanup message printing   Marcel Ziswiler
• [U-Boot] [PATCH v1 18/23] apalis_imx6: disable ri and dcd irq in uarts   Marcel Ziswiler
• [U-Boot] [PATCH v2 1/2] Kconfig: Migrate CONFIG_BUILD_TARGET   Jagan Teki
  • [U-Boot] [PATCH v2 1/2] Kconfig: Migrate CONFIG_BUILD_TARGET   Tom Rini
  • [U-Boot] [PATCH v2 1/2] Kconfig: Migrate CONFIG_BUILD_TARGET   Chris Packham
    • [U-Boot] [PATCH v2 1/2] Kconfig: Migrate CONFIG_BUILD_TARGET   Stefan Roese
      • [U-Boot] [PATCH v2 1/2] Kconfig: Migrate CONFIG_BUILD_TARGET   Chris Packham
• [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support   Abel Vesa
  • [U-Boot] [PATCH v4 01/20] common: spl_fit: Fix the spl_fit_image_get_os for FIT_IMAGE_TINY   Abel Vesa
    • [U-Boot] [PATCH v4 01/20] common: spl_fit: Fix the spl_fit_image_get_os for FIT_IMAGE_TINY   Tom Rini
    • [U-Boot] [PATCH v4 01/20] common: spl_fit: Fix the spl_fit_image_get_os for FIT_IMAGE_TINY   Lukasz Majewski
    • [U-Boot] [PATCH v4 01/20] common: spl_fit: Fix the spl_fit_image_get_os for FIT_IMAGE_TINY   Fabio Estevam
    • [U-Boot] [PATCH v4 01/20] common: spl_fit: Fix the spl_fit_image_get_os for FIT_IMAGE_TINY   Stefano Babic
      • [U-Boot] [PATCH v4 01/20] common: spl_fit: Fix the spl_fit_image_get_os for FIT_IMAGE_TINY   Abel Vesa
    • [U-Boot] [U-Boot, v4, 01/20] common: spl_fit: Fix the spl_fit_image_get_os for FIT_IMAGE_TINY   sbabic at denx.de
  • [U-Boot] [PATCH v4 02/20] usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE   Abel Vesa
    • [U-Boot] [PATCH v4 02/20] usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE   Fabio Estevam
    • [U-Boot] [PATCH v4 02/20] usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE   Lukasz Majewski
    • [U-Boot] [U-Boot, v4, 02/20] usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE   sbabic at denx.de
  • [U-Boot] [PATCH v4 03/20] usb: ehci-mx6: Make regulator DM_REGULATOR dependent   Abel Vesa
    • [U-Boot] [PATCH v4 03/20] usb: ehci-mx6: Make regulator DM_REGULATOR dependent   Fabio Estevam
    • [U-Boot] [PATCH v4 03/20] usb: ehci-mx6: Make regulator DM_REGULATOR dependent   Lukasz Majewski
    • [U-Boot] [U-Boot, v4, 03/20] usb: ehci-mx6: Make regulator DM_REGULATOR dependent   sbabic at denx.de
  • [U-Boot] [PATCH v4 04/20] configs: imx6sabreauto: Add DM_MMC support   Abel Vesa
    • [U-Boot] [PATCH v4 04/20] configs: imx6sabreauto: Add DM_MMC support   Fabio Estevam
    • [U-Boot] [U-Boot, v4, 04/20] configs: imx6sabreauto: Add DM_MMC support   sbabic at denx.de
  • [U-Boot] [PATCH v4 05/20] configs: imx6sabreauto: Add DM_USB support   Abel Vesa
    • [U-Boot] [PATCH v4 05/20] configs: imx6sabreauto: Add DM_USB support   Fabio Estevam
    • [U-Boot] [U-Boot, v4, 05/20] configs: imx6sabreauto: Add DM_USB support   sbabic at denx.de
  • [U-Boot] [PATCH v4 06/20] mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds   Abel Vesa
    • [U-Boot] [PATCH v4 06/20] mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds   Fabio Estevam
    • [U-Boot] [PATCH v4 06/20] mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds   Lukasz Majewski
    • [U-Boot] [U-Boot, v4, 06/20] mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds   sbabic at denx.de
  • [U-Boot] [PATCH v4 07/20] board: mx6sabresd: Add board_fit_config_name_match to support FIT in SPL   Abel Vesa
    • [U-Boot] [PATCH v4 07/20] board: mx6sabresd: Add board_fit_config_name_match to support FIT in SPL   Fabio Estevam
    • [U-Boot] [PATCH v4 07/20] board: mx6sabresd: Add board_fit_config_name_match to support FIT in SPL   Lukasz Majewski
    • [U-Boot] [U-Boot, v4, 07/20] board: mx6sabresd: Add board_fit_config_name_match to support FIT in SPL   sbabic at denx.de
  • [U-Boot] [PATCH v4 08/20] board: mx6sabreauto: Add board_fit_config_name_match to support FIT in SPL   Abel Vesa
    • [U-Boot] [PATCH v4 08/20] board: mx6sabreauto: Add board_fit_config_name_match to support FIT in SPL   Fabio Estevam
    • [U-Boot] [PATCH v4 08/20] board: mx6sabreauto: Add board_fit_config_name_match to support FIT in SPL   Lukasz Majewski
    • [U-Boot] [U-Boot, v4, 08/20] board: mx6sabreauto: Add board_fit_config_name_match to support FIT in SPL   sbabic at denx.de
  • [U-Boot] [PATCH v4 09/20] arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files   Abel Vesa
    • [U-Boot] [PATCH v4 09/20] arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files   Fabio Estevam
    • [U-Boot] [PATCH v4 09/20] arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files   Lukasz Majewski
    • [U-Boot] [U-Boot, v4, 09/20] arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files   sbabic at denx.de
  • [U-Boot] [PATCH v4 10/20] arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd]   Abel Vesa
    • [U-Boot] [PATCH v4 10/20] arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd]   Fabio Estevam
    • [U-Boot] [PATCH v4 10/20] arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd]   Lukasz Majewski
    • [U-Boot] [U-Boot, v4, 10/20] arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd]   sbabic at denx.de
  • [U-Boot] [PATCH v4 11/20] configs: mx6sabreauto: Add SPL FIT and DM support   Abel Vesa
    • [U-Boot] [PATCH v4 11/20] configs: mx6sabreauto: Add SPL FIT and DM support   Fabio Estevam
    • [U-Boot] [U-Boot, v4, 11/20] configs: mx6sabreauto: Add SPL FIT and DM support   sbabic at denx.de
  • [U-Boot] [PATCH v4 12/20] configs: mx6sabresd: Add SPL FIT and DM support   Abel Vesa
    • [U-Boot] [PATCH v4 12/20] configs: mx6sabresd: Add SPL FIT and DM support   Fabio Estevam
    • [U-Boot] [U-Boot, v4, 12/20] configs: mx6sabresd: Add SPL FIT and DM support   sbabic at denx.de
  • [U-Boot] [PATCH v4 14/20] mx6sabresd: Add DM_GPIO support   Abel Vesa
    • [U-Boot] [PATCH v4 14/20] mx6sabresd: Add DM_GPIO support   Fabio Estevam
    • [U-Boot] [U-Boot,v4,14/20] mx6sabresd: Add DM_GPIO support   sbabic at denx.de
  • [U-Boot] [PATCH v4 13/20] mx6sabreauto: Add DM_GPIO support   Abel Vesa
    • [U-Boot] [PATCH v4 13/20] mx6sabreauto: Add DM_GPIO support   Fabio Estevam
    • [U-Boot] [U-Boot,v4,13/20] mx6sabreauto: Add DM_GPIO support   sbabic at denx.de
  • [U-Boot] [PATCH v4 15/20] configs: mx6sabreauto: Add DM_SPI_FLASH necessary configs   Abel Vesa
    • [U-Boot] [PATCH v4 15/20] configs: mx6sabreauto: Add DM_SPI_FLASH necessary configs   Fabio Estevam
    • [U-Boot] [U-Boot, v4, 15/20] configs: mx6sabreauto: Add DM_SPI_FLASH necessary configs   sbabic at denx.de
  • [U-Boot] [PATCH v4 16/20] configs: mx6sabresd: Add DM_SPI_FLASH necessary configs   Abel Vesa
    • [U-Boot] [PATCH v4 16/20] configs: mx6sabresd: Add DM_SPI_FLASH necessary configs   Fabio Estevam
    • [U-Boot] [U-Boot, v4, 16/20] configs: mx6sabresd: Add DM_SPI_FLASH necessary configs   sbabic at denx.de
  • [U-Boot] [PATCH v4 17/20] board: mx6sabreauto: Remove the non-DM code   Abel Vesa
    • [U-Boot] [PATCH v4 17/20] board: mx6sabreauto: Remove the non-DM code   Fabio Estevam
    • [U-Boot] [U-Boot, v4, 17/20] board: mx6sabreauto: Remove the non-DM code   sbabic at denx.de
  • [U-Boot] [PATCH v4 18/20] board: mx6sabresd: Remove non-DM code   Abel Vesa
    • [U-Boot] [PATCH v4 18/20] board: mx6sabresd: Remove non-DM code   Fabio Estevam
    • [U-Boot] [U-Boot,v4,18/20] board: mx6sabresd: Remove non-DM code   sbabic at denx.de
  • [U-Boot] [PATCH v4 19/20] board: mx6sabresd: Remove the enet reset gpio handling   Abel Vesa
    • [U-Boot] [PATCH v4 19/20] board: mx6sabresd: Remove the enet reset gpio handling   Fabio Estevam
      • [U-Boot] [PATCH v4 19/20] board: mx6sabresd: Remove the enet reset gpio handling   Soeren Moch
      • [U-Boot] [PATCH v4 19/20] board: mx6sabresd: Remove the enet reset gpio handling   Fabio Estevam
    • [U-Boot] [U-Boot, v4, 19/20] board: mx6sabresd: Remove the enet reset gpio handling   sbabic at denx.de
  • [U-Boot] [PATCH v4 20/20] configs: mx6sabresd: Reduce SPL size by disabling DOS, EXT and EFI support   Abel Vesa
    • [U-Boot] [PATCH v4 20/20] configs: mx6sabresd: Reduce SPL size by disabling DOS, EXT and EFI support   Fabio Estevam
    • [U-Boot] [U-Boot, v4, 20/20] configs: mx6sabresd: Reduce SPL size by disabling DOS, EXT and EFI support   sbabic at denx.de
  • [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support   Fabio Estevam
    • [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support   Abel Vesa
      • [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support   Fabio Estevam
  • [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support   Tom Rini
  • [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support   Fabio Estevam
    • [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support   Abel Vesa
      • [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support   Fabio Estevam
      • [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support   Tom Rini
      • [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support   Abel Vesa
      • [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support   Simon Goldschmidt
      • [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support   Tom Rini
      • [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support   Abel Vesa
      • [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support   Fabio Estevam
• [U-Boot] [RFC PATCH v1] MLK-12883 usb: limit USB_MAX_XFER_BLK to 256   Marcel Ziswiler
• [U-Boot] [PULL] Please pull u-boot-rockchip:tags/for-master-20190201   Philipp Tomsich
  • [U-Boot] [PULL] Please pull u-boot-rockchip:tags/for-master-20190201   Philipp Tomsich
  • [U-Boot] [PULL] Please pull u-boot-rockchip:tags/for-master-20190201   Tom Rini
  • [U-Boot] [PULL] Please pull u-boot-rockchip:tags/for-master-20190201   Vignesh R
    • [U-Boot] [PULL] Please pull u-boot-rockchip:tags/for-master-20190201   Philipp Tomsich
• [U-Boot] [PULL] u-boot-mips   Daniel Schwierzeck
  • [U-Boot] [PULL] u-boot-mips   Tom Rini
• [U-Boot] [PATCH v3 0/6] Add support for symlink creation in EXT4   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v3 2/6] test: fs: disable the metadata checksums on ext4 filesystems   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v3 3/6] fs: ext4: constify the buffer passed to write functions   Jean-Jacques Hiblot
    • [U-Boot] [PATCH v3 3/6] fs: ext4: constify the buffer passed to write functions   Tom Rini
      • [U-Boot] [PATCH v3 3/6] fs: ext4: constify the buffer passed to write functions   Jean-Jacques Hiblot
      • [U-Boot] [PATCH v3 3/6] fs: ext4: constify the buffer passed to write functions   Tom Rini
  • [U-Boot] [PATCH v3 4/6] fs: ext4: Add support for the creation of symbolic links   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v3 5/6] fs: Add a new command to create symbolic links   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v3 6/6] test: fs: Added tests for symlinks   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 1/6] fs: ext4: do not allow writes if metadata checksum is active   Jean-Jacques Hiblot
• [U-Boot] [PATCH] sf: prevent clean_bar overwriting error codes   Simon Goldschmidt
• [U-Boot] [PATCH v2] spl: implement CRC check on U-Boot uImage   Simon Goldschmidt
• [U-Boot] [PATCH v1 0/4] arm: socfgpa: support of-platdata   Simon Goldschmidt
• [U-Boot] [PATCH v2 1/2] lmb: handle more than one DRAM BANK   Simon Goldschmidt
  • [U-Boot] [PATCH v2 2/2] test: lib: lmb: add lmb test for multiple RAM banks   Simon Goldschmidt
    • [U-Boot] [PATCH v2 2/2] test: lib: lmb: add lmb test for multiple RAM banks   Simon Glass
    • [U-Boot] [PATCH v2 2/2] test: lib: lmb: add lmb test for multiple RAM banks   Tom Rini
  • [U-Boot] [PATCH v2 1/2] lmb: handle more than one DRAM BANK   Simon Glass
• [U-Boot] [PATCH v4 1/1] avb: add support for named persistent values   Igor Opaniuk
  • [U-Boot] [PATCH v4 1/1] avb: add support for named persistent values   Simon Glass
• [U-Boot] [PATCH 1/3] configs: am65x_evm_r5: Enable GPT support   Andrew F. Davis
  • [U-Boot] [PATCH 3/3] armv7R: K3: am654: Fix order of debug elements in x509 template   Andrew F. Davis
    • [U-Boot] [PATCH 3/3] armv7R: K3: am654: Fix order of debug elements in x509 template   Tom Rini
    • [U-Boot] [PATCH 3/3] armv7R: K3: am654: Fix order of debug elements in x509 template   Lokesh Vutla
    • [U-Boot] [U-Boot, 3/3] armv7R: K3: am654: Fix order of debug elements in x509 template   Tom Rini
  • [U-Boot] [PATCH 1/3] configs: am65x_evm_r5: Enable GPT support   Tom Rini
  • [U-Boot] [PATCH 1/3] configs: am65x_evm_r5: Enable GPT support   Lokesh Vutla
  • [U-Boot] [U-Boot, 1/3] configs: am65x_evm_r5: Enable GPT support   Tom Rini
• [U-Boot] [PATCH 2/3] am65x_evm: Allow bootm to load larger kernels   Andrew F. Davis
  • [U-Boot] [PATCH 2/3] am65x_evm: Allow bootm to load larger kernels   Tom Rini
  • [U-Boot] [PATCH 2/3] am65x_evm: Allow bootm to load larger kernels   Lokesh Vutla
  • [U-Boot] [U-Boot, 2/3] am65x_evm: Allow bootm to load larger kernels   Tom Rini
• [U-Boot] IMX6 NAND boot regression   Tim Harvey
  • [U-Boot] IMX6 NAND boot regression   Stefan Agner
    • [U-Boot] IMX6 NAND boot regression   Jagan Teki
      • [U-Boot] IMX6 NAND boot regression   Adam Ford
      • [U-Boot] IMX6 NAND boot regression   Jörg Krause
      • [U-Boot] IMX6 NAND boot regression   Tim Harvey
• [U-Boot] [U-Boot, v2, 2/2] Kconfig: Add u-boot.itb BUILD_TARGET for Rockchip   Tom Rini
• [U-Boot] [PATCH 1/4] dm: core: Add of_alias_get_highest_id()   Simon Glass
• [U-Boot] [RFC PATCH] dm: device: Do not probe parents which are probed already   Simon Glass
  • [U-Boot] [RFC PATCH] dm: device: Do not probe parents which are probed already   Michal Simek
• [U-Boot] [PATCH] core: ofnode: Add ofnode_pci_get_devfn()   Simon Glass
  • [U-Boot] [PATCH] core: ofnode: Add ofnode_pci_get_devfn()   Stefan Roese
• [U-Boot] [PATCH 3/4] i2c: dm: Record maximum id of devices before probing devices   Simon Glass
  • [U-Boot] [PATCH 3/4] i2c: dm: Record maximum id of devices before probing devices   Michal Simek
• [U-Boot] [PATCH v4] misc: fs_loader: Add support for initializing block device   Simon Glass
  • [U-Boot] [PATCH v4] misc: fs_loader: Add support for initializing block device   Chee, Tien Fong
• [U-Boot] [PATCH 2/3] x86: Don't copy the cpu_call64() function to a hardcoded address   Simon Glass
  • [U-Boot] [PATCH 2/3] x86: Don't copy the cpu_call64() function to a hardcoded address   Bin Meng
• [U-Boot] [PATCH 3/3] x86: Use the existing GDT in the ROM for 64-bit U-Boot proper   Simon Glass
  • [U-Boot] [PATCH 3/3] x86: Use the existing GDT in the ROM for 64-bit U-Boot proper   Bin Meng
• [U-Boot] Nand boot on imx6q board is broken   Jörg Krause
  • [U-Boot] Nand boot on imx6q board is broken   Adam Ford
• [U-Boot] [PATCH] MTD: mxs_nand: Fix BCH read timeout error on boards requiring ECC   Jörg Krause
  • [U-Boot] [PATCH] MTD: mxs_nand: Fix BCH read timeout error on boards requiring ECC   Tim Harvey
    • [U-Boot] [PATCH] MTD: mxs_nand: Fix BCH read timeout error on boards requiring ECC   Adam Ford
      • [U-Boot] [PATCH] MTD: mxs_nand: Fix BCH read timeout error on boards requiring ECC   Adam Ford
      • [U-Boot] [PATCH] MTD: mxs_nand: Fix BCH read timeout error on boards requiring ECC   Scott Wood
      • [U-Boot] [PATCH] MTD: mxs_nand: Fix BCH read timeout error on boards requiring ECC   Adam Ford
      • [U-Boot] [PATCH] MTD: mxs_nand: Fix BCH read timeout error on boards requiring ECC   Tom Rini
      • [U-Boot] [PATCH] MTD: mxs_nand: Fix BCH read timeout error on boards requiring ECC   Stefano Babic
• [U-Boot] [PATCH v2 0/7] Align U-Boot I2C DM bus ID handling with Linux   Simon Glass
  • [U-Boot] [PATCH v2 0/7] Align U-Boot I2C DM bus ID handling with Linux   Michal Simek
    • [U-Boot] [PATCH v2 0/7] Align U-Boot I2C DM bus ID handling with Linux   Heiko Schocher
      • [U-Boot] [PATCH v2 0/7] Align U-Boot I2C DM bus ID handling with Linux   Michal Simek
    • [U-Boot] [PATCH v2 0/7] Align U-Boot I2C DM bus ID handling with Linux   Simon Glass
      • [U-Boot] [PATCH v2 0/7] Align U-Boot I2C DM bus ID handling with Linux   Michal Simek
  • [U-Boot] [PATCH v2 0/7] Align U-Boot I2C DM bus ID handling with Linux   Heiko Schocher
    • [U-Boot] [PATCH v2 0/7] Align U-Boot I2C DM bus ID handling with Linux   Michal Simek
      • [U-Boot] [PATCH v2 0/7] Align U-Boot I2C DM bus ID handling with Linux   Michal Simek
      • [U-Boot] [PATCH v2 0/7] Align U-Boot I2C DM bus ID handling with Linux   Heiko Schocher
      • [U-Boot] [PATCH v2 0/7] Align U-Boot I2C DM bus ID handling with Linux   Michal Simek
      • [U-Boot] [PATCH v2 0/7] Align U-Boot I2C DM bus ID handling with Linux   Heiko Schocher
      • [U-Boot] [PATCH v2 0/7] Align U-Boot I2C DM bus ID handling with Linux   Michal Simek
• [U-Boot] [PATCH] initcall: Move to inline function   Simon Glass
  • [U-Boot] [PATCH] initcall: Move to inline function   Alexander Graf
    • [U-Boot] [PATCH] initcall: Move to inline function   Simon Glass
      • [U-Boot] [PATCH] initcall: Move to inline function   Alexander Graf
      • [U-Boot] [PATCH] initcall: Move to inline function   Simon Glass
      • [U-Boot] [PATCH] initcall: Move to inline function   Tom Rini
      • [U-Boot] [PATCH] initcall: Move to inline function   Alexander Graf
      • [U-Boot] [PATCH] initcall: Move to inline function   Tom Rini
• [U-Boot] [PATCH v2 7/7] i2c: mux: Generate longer i2c mux name   Simon Glass
  • [U-Boot] [PATCH v2 7/7] i2c: mux: Generate longer i2c mux name   Heiko Schocher
  • [U-Boot] [PATCH v2 7/7] i2c: mux: Generate longer i2c mux name   Heiko Schocher
• [U-Boot] [PATCH] MTD: nand: mxs_nand_spl: Fix empty function pointer for BBT   Jörg Krause
• [U-Boot] [PATCH v2 00/11] SiFive FU540 Support   Paul Walmsley
  • [U-Boot] [PATCH v2 00/11] SiFive FU540 Support   Auer, Lukas
• [U-Boot] [PATCH] MTD: nand: mxs_nand: Allow driver to auto setup ECC in SPL   Jörg Krause
  • [U-Boot] [PATCH] MTD: nand: mxs_nand: Allow driver to auto setup ECC in SPL   Adam Ford
  • [U-Boot] [PATCH] MTD: nand: mxs_nand: Allow driver to auto setup ECC in SPL   Tim Harvey
    • [U-Boot] [PATCH] MTD: nand: mxs_nand: Allow driver to auto setup ECC in SPL   Adam Ford
• [U-Boot] [PATCH v3 00/22] imx: vybrid: Update BK4 and PCM052 boards to only use DM/DTS   Lukasz Majewski
  • [U-Boot] [PATCH v3 03/22] vybrid: ddr: Extend vf610-pinfunc.h with DDR pads definitions   Lukasz Majewski
    • [U-Boot] [PATCH v3 03/22] vybrid: ddr: Extend vf610-pinfunc.h with DDR pads definitions   Marcel Ziswiler
      • [U-Boot] [PATCH v3 03/22] vybrid: ddr: Extend vf610-pinfunc.h with DDR pads definitions   Lukasz Majewski
  • [U-Boot] [PATCH v3 04/22] vybrid: clock: Provide enable_i2c_clk() function for Vybrid   Lukasz Majewski
    • [U-Boot] [PATCH v3 04/22] vybrid: clock: Provide enable_i2c_clk() function for Vybrid   Stefan Agner
    • [U-Boot] [PATCH v3 04/22] vybrid: clock: Provide enable_i2c_clk() function for Vybrid   Marcel Ziswiler
  • [U-Boot] [PATCH v3 05/22] pcm052: board: Do not enable I2C2 code in the board file   Lukasz Majewski
    • [U-Boot] [PATCH v3 05/22] pcm052: board: Do not enable I2C2 code in the board file   Marcel Ziswiler
  • [U-Boot] [PATCH v3 06/22] vybrid: Define the imx_get_mac_from_fuse() as a __weak function   Lukasz Majewski
  • [U-Boot] [PATCH v3 07/22] pcm052: board: Remove "m4go" command as it is superseded by "bootaux"   Lukasz Majewski
    • [U-Boot] [PATCH v3 07/22] pcm052: board: Remove "m4go" command as it is superseded by "bootaux"   Marcel Ziswiler
      • [U-Boot] [PATCH v3 07/22] pcm052: board: Remove "m4go" command as it is superseded by "bootaux"   Lukasz Majewski
  • [U-Boot] [PATCH v3 08/22] pcm052: board: vybrid: Update the board name for BK4 device   Lukasz Majewski
  • [U-Boot] [PATCH v3 09/22] ARM: DTS: vybrid: Update vf.dtsi file to descibe more vf610 hardware   Lukasz Majewski
    • [U-Boot] [PATCH v3 09/22] ARM: DTS: vybrid: Update vf.dtsi file to descibe more vf610 hardware   Marcel Ziswiler
  • [U-Boot] [PATCH v3 10/22] pcm052: board: cosmetic: Add copyright notice to pcm052.c   Lukasz Majewski
  • [U-Boot] [PATCH v3 11/22] ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052)   Lukasz Majewski
  • [U-Boot] [PATCH v3 12/22] ARM: DTS: Provide vf610-bk4r1-u-boot.dtsi for U-Boot specific properties   Lukasz Majewski
  • [U-Boot] [PATCH v3 13/22] defconfig: bk4/pcm052: Update bk4r1|pcm052_defconfig to support DM/DT   Lukasz Majewski
  • [U-Boot] [PATCH v3 14/22] config: pcm052: Use SZ_X{MK} from linux/sizes.h for include/configs/pcm052.h   Lukasz Majewski
    • [U-Boot] [PATCH v3 14/22] config: pcm052: Use SZ_X{MK} from linux/sizes.h for include/configs/pcm052.h   Marcel Ziswiler
  • [U-Boot] [PATCH v3 15/22] config: bk4: Update include/configs/bk4r1.h file   Lukasz Majewski
  • [U-Boot] [PATCH v3 16/22] pcm052: board: Remove in-board setup code (it is now replaced by DM setup)   Lukasz Majewski
  • [U-Boot] [PATCH v3 17/22] config: bk4: Update u-boot script to support recovery via SD card   Lukasz Majewski
  • [U-Boot] [PATCH v3 18/22] config: bk4: Update u-boot envs to support NOR memories initial setup   Lukasz Majewski
  • [U-Boot] [PATCH v3 19/22] pcm052: bk4: sdcard: Add support for SD card booting/recovery   Lukasz Majewski
  • [U-Boot] [PATCH v3 20/22] pcm052: board: Add code to setup LED default states   Lukasz Majewski
  • [U-Boot] [PATCH v3 21/22] pcm052: mac: Provide board specific imx_get_mac_from_fuse() function   Lukasz Majewski
  • [U-Boot] [PATCH v3 22/22] pcm052: bk4: Add board_phy_config() for BK4 to setup ksz8081 phy   Lukasz Majewski
• [U-Boot] [PATCH v3 01/22] net: FEC: Add compatible for vybrid (vf610) to reuse fec_mxc.c driver   Lukasz Majewski
  • [U-Boot] [PATCH v3 01/22] net: FEC: Add compatible for vybrid (vf610) to reuse fec_mxc.c driver   Marcel Ziswiler
    • [U-Boot] [PATCH v3 01/22] net: FEC: Add compatible for vybrid (vf610) to reuse fec_mxc.c driver   Lukasz Majewski
• [U-Boot] [PATCH v3 02/22] net: Kconfig: FEC: Add dependency on VF610   Lukasz Majewski
• [U-Boot] [U-Boot,v2,1/2] Kconfig: Migrate CONFIG_BUILD_TARGET   Tom Rini
• [U-Boot] Kconfig: set default BUILD_TARGET for kirkwood   Tom Rini
• [U-Boot] [U-Boot, v1, 1/3] arm: dts: add am335x-shc.dts for shc board   Tom Rini
• [U-Boot] [U-Boot, v1, 2/3] ARM: dts: am335x-shc: add u-boot specific dtsi   Tom Rini
• [U-Boot] [U-Boot,v1,3/3] am335x, shc: adapt shc board to DM   Tom Rini
• [U-Boot] [U-Boot, v1, 1/4] usb: ether: call _usb_eth_halt() if initialization fails   Tom Rini
• [U-Boot] [U-Boot, v1, 2/4] ARM: DTS: am335x-evm: Use USB0 in peripheral mode   Tom Rini
• [U-Boot] [U-Boot, v1, 3/4] configs: am335x_evm: enable DM_USB_GADGET and USB_ETHER in u-boot and SPL   Tom Rini
• [U-Boot] [U-Boot, v1, 4/4] configs: removing am335x_evm_usbspl_defconfig   Tom Rini
• [U-Boot] [U-Boot, v2, 1/4] spl: Kconfig: Replace CONFIG_SPL_FAT_SUPPORT with CONFIG_SPL_FS_FAT   Tom Rini
• [U-Boot] [U-Boot, v2, 2/4] spl: fat/fs: Add option to include/exclude FAT write build in SPL   Tom Rini
• [U-Boot] [U-Boot, v2, 3/4] spl: Kconfig: Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPL_FS_EXT4   Tom Rini
• [U-Boot] [U-Boot, v2, 4/4] spl: fat/fs: Add control to build FS EXT4 in SPL   Tom Rini
• [U-Boot] ARM: am3517_evm: Enable DM_SPI and DM_USB   Tom Rini
• [U-Boot] ARM: dts: da850-evm: Re-sync with Kernel 5.0   Tom Rini
• [U-Boot] ARM: DTS: Resync am3517-evm.dts with Linux 5.0-rc3   Tom Rini
• [U-Boot] [U-Boot, v1, 1/3] ARM: DTS: am43xx: Add aliases for the USB ports   Tom Rini
• [U-Boot] [U-Boot, v1, 2/3] ARM: DTS: am43xx: Enable the DTS entries for USB port #2 in SPL   Tom Rini
• [U-Boot] regulator: pbias: Handle extended drain IO when changing omap36 PBIAS   Tom Rini
• [U-Boot] [U-Boot, 1/5] tools: dumpimage: Provide more feedback on error   Tom Rini
• [U-Boot] [U-Boot,2/5] tools: dumpimage: Simplify arguments   Tom Rini
• [U-Boot] [U-Boot, 3/5] tools: dumpimage: Simplify internal logic   Tom Rini
• [U-Boot] [U-Boot, 4/5] tools: dumpimage: Add help option and make error paths consistent   Tom Rini
• [U-Boot] [U-Boot,5/5] tools: dumpimage: Clarify help   Tom Rini
• [U-Boot] lmb: handle more than one DRAM BANK   Tom Rini
• [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support   Anup Patel
  • [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support   Andreas Schwab
    • [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support   Atish Patra
      • [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support   Andreas Schwab
      • [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support   Anup Patel
      • [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support   Andreas Schwab
      • [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support   Anup Patel
      • [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support   Andreas Schwab
      • [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support   Anup Patel
      • [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support   Andreas Schwab
      • [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support   Anup Patel
      • [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support   Andreas Schwab
      • [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support   Anup Patel
• [U-Boot] [PATCH 1/3] arm: mvebu: mcbin: dts: fix PCIe reset polarity   Baruch Siach
  • [U-Boot] [PATCH 1/3] arm: mvebu: mcbin: dts: fix PCIe reset polarity   Stefan Roese
  • [U-Boot] [PATCH 1/3] arm: mvebu: mcbin: dts: fix PCIe reset polarity   Stefan Roese
• [U-Boot] [PATCH 2/3] pcie: designware: mvebu: fix reset release polarity   Baruch Siach
  • [U-Boot] [PATCH 2/3] pcie: designware: mvebu: fix reset release polarity   Stefan Roese
  • [U-Boot] [PATCH 2/3] pcie: designware: mvebu: fix reset release polarity   Stefan Roese
• [U-Boot] [PATCH 3/3] arm: mvebu: cf gt-8k: dts: add PCIe slot reset support   Baruch Siach
  • [U-Boot] [PATCH 3/3] arm: mvebu: cf gt-8k: dts: add PCIe slot reset support   Stefan Roese
  • [U-Boot] [PATCH 3/3] arm: mvebu: cf gt-8k: dts: add PCIe slot reset support   Stefan Roese
• [U-Boot] [PATCH] rockchip: rk3399-puma: support Gigadevice SPI-NOR flash   Philipp Tomsich
  • [U-Boot] [PATCH] rockchip: rk3399-puma: support Gigadevice SPI-NOR flash   klaus.goger at theobroma-systems.com
• [U-Boot] [PATCH 0/8] rockchip: Improve SPI-NOR read performance for the RK3399-Q7   Philipp Tomsich
  • [U-Boot] [PATCH 2/8] rockchip: spi: remove unused code and fields in priv   Philipp Tomsich
  • [U-Boot] [PATCH 3/8] rockchip: spi: fix off-by-one in chunk size computation   Philipp Tomsich
  • [U-Boot] [PATCH 4/8] rockchip: spi: consistently use false/true with rkspi_enable_chip   Philipp Tomsich
  • [U-Boot] [PATCH 5/8] rockchip: spi: only wait for completion, if transmitting   Philipp Tomsich
  • [U-Boot] [PATCH 6/8] rockchip: spi: add optimised receive-only implementation   Philipp Tomsich
  • [U-Boot] [PATCH 7/8] rockchip: spi: add driver-data and a 'rxonly_manages_fifo' flag   Philipp Tomsich
  • [U-Boot] [PATCH 8/8] rockchip: spi: make optimised receive-handler unaligned-safe   Philipp Tomsich
• [U-Boot] [PATCH 1/8] rockchip: spi: add debug message for delay in CS toggle   Philipp Tomsich
• [U-Boot] [PATCH v2 0/5] net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driver   Keerthy
  • [U-Boot] [PATCH v2 2/5] net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driver   Keerthy
    • [U-Boot] [PATCH v2 2/5] net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driver   Keerthy
  • [U-Boot] [PATCH v2 3/5] arm64: dts: ti: k3-am65: add mcu cpsw node   Keerthy
  • [U-Boot] [PATCH v2 4/5] arm64: dts: k3-am654-base-board: add mcu cpsw nuss pinmux and phy defs   Keerthy
  • [U-Boot] [PATCH v2 5/5] configs: am65x_evm_a53: enable networking   Keerthy
• [U-Boot] [PATCH v2 1/5] driver: net: ti: cpsw-mdio: use phys_addr_t for mdio_base addr   Keerthy
• [U-Boot] [PATCH v3 2/5] net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driver   Keerthy
  • [U-Boot] [PATCH v3 2/5] net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driver   Tom Rini
• [U-Boot] [PATCH] board/lx2160a: Add init_func_vid() definition   Priyanka Jain
  • [U-Boot] [PATCH] board/lx2160a: Add init_func_vid() definition   Prabhakar Kushwaha
• [U-Boot] [PATCH] imx8mq_evk_defconfig: Enable pinctrl driver   Chris Spencer
  • [U-Boot] [PATCH] imx8mq_evk_defconfig: Enable pinctrl driver   Fabio Estevam
• [U-Boot] [PATCH v4 0/6] Add support for symlink creation in EXT4   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v4 2/6] test: fs: disable the metadata checksums on ext4 filesystems   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v4 5/6] fs: Add a new command to create symbolic links   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v4 6/6] test: fs: Added tests for symlinks   Jean-Jacques Hiblot
• [U-Boot] [PATCH v4 1/6] fs: ext4: do not allow writes if metadata checksum is active   Jean-Jacques Hiblot
• [U-Boot] [PATCH v4 3/6] fs: ext4: constify the buffer passed to write functions   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v4 3/6] fs: ext4: constify the buffer passed to write functions   Tom Rini
• [U-Boot] [PATCH v4 4/6] fs: ext4: Add support for the creation of symbolic links   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2] imx8mq_evk_defconfig: Enable pinctrl driver   Chris Spencer
• [U-Boot] [PATCH 1/2] fdt: Allow indicating a node is for U-Boot proper only   Patrick Delaunay
  • [U-Boot] [PATCH 2/2] dm: core: remove the duplicated function dm_ofnode_pre_reloc   Patrick Delaunay
    • [U-Boot] [PATCH 2/2] dm: core: remove the duplicated function dm_ofnode_pre_reloc   Simon Glass
      • [U-Boot] [PATCH 2/2] dm: core: remove the duplicated function dm_ofnode_pre_reloc   Patrick DELAUNAY
  • [U-Boot] [PATCH 1/2] fdt: Allow indicating a node is for U-Boot proper only   Simon Glass
    • [U-Boot] [PATCH 1/2] fdt: Allow indicating a node is for U-Boot proper only   Marek Vasut
      • [U-Boot] [PATCH 1/2] fdt: Allow indicating a node is for U-Boot proper only   Patrick DELAUNAY
      • [U-Boot] [PATCH 1/2] fdt: Allow indicating a node is for U-Boot proper only   Marek Vasut
      • [U-Boot] [PATCH 1/2] fdt: Allow indicating a node is for U-Boot proper only   Patrick DELAUNAY
      • [U-Boot] [PATCH 1/2] fdt: Allow indicating a node is for U-Boot proper only   Patrick DELAUNAY
      • [U-Boot] [PATCH 1/2] fdt: Allow indicating a node is for U-Boot proper only   Marek Vasut
      • [U-Boot] [PATCH 1/2] fdt: Allow indicating a node is for U-Boot proper only   Patrick DELAUNAY
• [U-Boot] [PATCH 0/8] pmic: stpmic1: rename and update stpmic1 driver   Patrick Delaunay
  • [U-Boot] [PATCH 3/8] power: rename stpmu1 to official name stpmic1   Patrick Delaunay
    • [U-Boot] [PATCH 3/8] power: rename stpmu1 to official name stpmic1   Lukasz Majewski
• [U-Boot] [PATCH 1/8] regulator: stpmu1: update buck1 range   Patrick Delaunay
• [U-Boot] [PATCH 2/8] power: stpmu1: rename files to stpmic1   Patrick Delaunay
  • [U-Boot] [PATCH 2/8] power: stpmu1: rename files to stpmic1   Lukasz Majewski
• [U-Boot] [PATCH 4/8] stpmic1: update register names   Patrick Delaunay
• [U-Boot] [PATCH 5/8] pmic: stpmu1: add power switch off support   Patrick Delaunay
• [U-Boot] [PATCH 6/8] stm32mp1: add command poweroff   Patrick Delaunay
• [U-Boot] [PATCH 7/8] stm32mp1: dts: activate psci-1.0   Patrick Delaunay
• [U-Boot] [PATCH 8/8] stpmic1: add NVM update support in fuse command   Patrick Delaunay
• [U-Boot] [PATCH 0/6] Add support for MT8516 SoCs   Fabien Parent
  • [U-Boot] [PATCH 1/6] mmc: mtk-sd: add source_cg clock support   Fabien Parent
    • [U-Boot] [PATCH 1/6] mmc: mtk-sd: add source_cg clock support   Ryder Lee
  • [U-Boot] [PATCH 2/6] mmc: mtk-sd: add support for MT8516   Fabien Parent
    • [U-Boot] [PATCH 2/6] mmc: mtk-sd: add support for MT8516   Ryder Lee
  • [U-Boot] [PATCH 3/6] clk: mediatek: add support for CLK_GATE_SETCLR_INV flag   Fabien Parent
    • [U-Boot] [PATCH 3/6] clk: mediatek: add support for CLK_GATE_SETCLR_INV flag   Ryder Lee
  • [U-Boot] [PATCH 4/6] clk: mediatek: add driver for MT8516   Fabien Parent
    • [U-Boot] [PATCH 4/6] clk: mediatek: add driver for MT8516   Ryder Lee
  • [U-Boot] [PATCH 5/6] pinctrl: add driver for MT8516   Fabien Parent
    • [U-Boot] [PATCH 5/6] pinctrl: add driver for MT8516   Ryder Lee
  • [U-Boot] [PATCH 6/6] ARM: MediaTek: Add support for MT8516 SoC   Fabien Parent
    • [U-Boot] [PATCH 6/6] ARM: MediaTek: Add support for MT8516 SoC   Tom Rini
• [U-Boot] [PATCH] test: fs: Add filesystem integrity checks   Jean-Jacques Hiblot
  • [U-Boot] [PATCH] test: fs: Add filesystem integrity checks   Tom Rini
    • [U-Boot] [PATCH] test: fs: Add filesystem integrity checks   Jean-Jacques Hiblot
      • [U-Boot] [PATCH] test: fs: Add filesystem integrity checks   Jean-Jacques Hiblot
      • [U-Boot] [PATCH] test: fs: Add filesystem integrity checks   Simon Glass
• [U-Boot] [PATCH 1/2] bcm968580: rename to bcm968580xref   Philippe Reynes
• [U-Boot] [PATCH 2/2] bcm968580xref: switch to CONFIG_OF_SEPARATE   Philippe Reynes
• [U-Boot] [PATCH V2 1/2] bcm968580: rename to bcm968580xref   Philippe Reynes
  • [U-Boot] [U-Boot,V2,1/2] bcm968580: rename to bcm968580xref   Tom Rini
• [U-Boot] [PATCH V2 2/2] bcm968580xref: switch to CONFIG_OF_SEPARATE   Philippe Reynes
  • [U-Boot] [U-Boot, V2, 2/2] bcm968580xref: switch to CONFIG_OF_SEPARATE   Tom Rini
• [U-Boot] In which direction should we aim so our work is going the same way as uboot?   Gervais, Francois
• [U-Boot] [PATCH] cros: Expand the Chromium OS documentation   Tristan Bastian
  • [U-Boot] [PATCH] cros: Expand the Chromium OS documentation   Simon Glass
    • [U-Boot] [PATCH] cros: Expand the Chromium OS documentation   Tristan Bastian
• [U-Boot] [PATCH 2/2] efi_loader: set the dhcp ack received flag   Patrick Wildt
  • [U-Boot] [PATCH 2/2] efi_loader: set the dhcp ack received flag   Heinrich Schuchardt
• [U-Boot] [PATCH] MAINTAINERS: Change fsl-qoriq, mpc85xx, mpc86xx maintainers   York Sun
  • [U-Boot] [PATCH] MAINTAINERS: Change fsl-qoriq, mpc85xx, mpc86xx maintainers   Baruch Siach
    • [U-Boot] [PATCH] MAINTAINERS: Change fsl-qoriq, mpc85xx, mpc86xx maintainers   York Sun
      • [U-Boot] [PATCH] MAINTAINERS: Change fsl-qoriq, mpc85xx, mpc86xx maintainers   Tom Rini
      • [U-Boot] [PATCH] MAINTAINERS: Change fsl-qoriq, mpc85xx, mpc86xx maintainers   York Sun
  • [U-Boot] [PATCH v2] MAINTAINERS: Change fsl-qoriq, mpc85xx, mpc86xx maintainers   York Sun
    • [U-Boot] [PATCH v2] MAINTAINERS: Change fsl-qoriq, mpc85xx, mpc86xx maintainers   Tom Rini
    • [U-Boot] [PATCH v2] MAINTAINERS: Change fsl-qoriq, mpc85xx, mpc86xx maintainers   Prabhakar Kushwaha
    • [U-Boot] [U-Boot, v2] MAINTAINERS: Change fsl-qoriq, mpc85xx, mpc86xx maintainers   Tom Rini
• [U-Boot] [RFC] Reserve ATF memory on Marvell Armdada 3700/7K/8K   Patrick Wildt
  • [U-Boot] [RFC] Reserve ATF memory on Marvell Armdada 3700/7K/8K   Alexander Graf
    • [U-Boot] [RFC] Reserve ATF memory on Marvell Armdada 3700/7K/8K   Marcin Wojtas
• [U-Boot] [PATCH 1/1] efi_loader: efi_dp_split_file_path() error handling   Heinrich Schuchardt
• [U-Boot] [PATCH] arm: mach-k3: common: Clean up ATF image startup function   Andreas Dannenberg
  • [U-Boot] [PATCH] arm: mach-k3: common: Clean up ATF image startup function   Lokesh Vutla
  • [U-Boot] arm: mach-k3: common: Clean up ATF image startup function   Tom Rini
• [U-Boot] [PATCH] net: mv88e61xx: fix autonegotiation on ports   Tim Harvey
  • [U-Boot] [PATCH] net: mv88e61xx: fix autonegotiation on ports   Chris Packham
  • [U-Boot] net: mv88e61xx: fix autonegotiation on ports   sbabic at denx.de
• [U-Boot] [PATCH 00/14] Gateworks Ventana updates   Tim Harvey
  • [U-Boot] [PATCH 01/14] imx: ventana: mv88e61xx change LED configuration   Tim Harvey
    • [U-Boot] [U-Boot, 01/14] imx: ventana: mv88e61xx change LED configuration   sbabic at denx.de
  • [U-Boot] [PATCH 02/14] imx: ventana: do not iomux UART1   Tim Harvey
    • [U-Boot] [U-Boot,02/14] imx: ventana: do not iomux UART1   sbabic at denx.de
  • [U-Boot] [PATCH 03/14] imx: ventana: remove setup of I2C3 from SPL   Tim Harvey
    • [U-Boot] [U-Boot, 03/14] imx: ventana: remove setup of I2C3 from SPL   sbabic at denx.de
  • [U-Boot] [PATCH 04/14] imx: ventana: add support for GW5905   Tim Harvey
    • [U-Boot] [U-Boot,04/14] imx: ventana: add support for GW5905   sbabic at denx.de
  • [U-Boot] [PATCH 05/14] imx: ventana: add support for Z101WX01 LVDS display   Tim Harvey
    • [U-Boot] [U-Boot, 05/14] imx: ventana: add support for Z101WX01 LVDS display   sbabic at denx.de
  • [U-Boot] [PATCH 06/14] imx: ventana: skip nand init for nandless boards   Tim Harvey
    • [U-Boot] [U-Boot, 06/14] imx: ventana: skip nand init for nandless boards   sbabic at denx.de
  • [U-Boot] [PATCH 07/14] imx: ventana: add i2c detect for all LVDS displays   Tim Harvey
    • [U-Boot] [U-Boot, 07/14] imx: ventana: add i2c detect for all LVDS displays   sbabic at denx.de
  • [U-Boot] [PATCH 08/14] imx: ventana: add support for GW5906   Tim Harvey
    • [U-Boot] [U-Boot,08/14] imx: ventana: add support for GW5906   sbabic at denx.de
  • [U-Boot] [PATCH 09/14] imx: ventana: add support for GW5907   Tim Harvey
    • [U-Boot] [U-Boot,09/14] imx: ventana: add support for GW5907   sbabic at denx.de
  • [U-Boot] [PATCH 10/14] imx: ventana: add support for GW5908   Tim Harvey
    • [U-Boot] [U-Boot,10/14] imx: ventana: add support for GW5908   sbabic at denx.de
  • [U-Boot] [PATCH 11/14] imx: ventana: add support for GW5909   Tim Harvey
    • [U-Boot] [U-Boot,11/14] imx: ventana: add support for GW5909   sbabic at denx.de
  • [U-Boot] [PATCH 12/14] imx: ventana: add support for GW5901/GW5902   Tim Harvey
    • [U-Boot] [U-Boot, 12/14] imx: ventana: add support for GW5901/GW5902   sbabic at denx.de
  • [U-Boot] [PATCH 13/14] imx: ventana: gw5904/gw5909: disable RS485   Tim Harvey
    • [U-Boot] [U-Boot, 13/14] imx: ventana: gw5904/gw5909: disable RS485   sbabic at denx.de
  • [U-Boot] [PATCH 14/14] imx: ventana: fix usage of dt paths with leading 0s (Linux 4.15+)   Tim Harvey
    • [U-Boot] [U-Boot, 14/14] imx: ventana: fix usage of dt paths with leading 0s (Linux 4.15+)   sbabic at denx.de
• [U-Boot] [PATCH v4 3/3] cmd: mdio: Add new parameter to access MMD PHY registers   Joe Hershberger
  • [U-Boot] [PATCH v4 3/3] cmd: mdio: Add new parameter to access MMD PHY registers   Vladimir Oltean
    • [U-Boot] [PATCH v4 3/3] cmd: mdio: Add new parameter to access MMD PHY registers   Joe Hershberger
      • [U-Boot] [PATCH v4 3/3] cmd: mdio: Add new parameter to access MMD PHY registers   Carlo Caione
      • [U-Boot] [PATCH v4 3/3] cmd: mdio: Add new parameter to access MMD PHY registers   Joe Hershberger
      • [U-Boot] [PATCH v4 3/3] cmd: mdio: Add new parameter to access MMD PHY registers   Vladimir Oltean
      • [U-Boot] [PATCH v4 3/3] cmd: mdio: Add new parameter to access MMD PHY registers   Joe Hershberger
      • [U-Boot] [PATCH v4 3/3] cmd: mdio: Add new parameter to access MMD PHY registers   Carlo Caione
      • [U-Boot] [PATCH v4 3/3] cmd: mdio: Add new parameter to access MMD PHY registers   Vladimir Oltean
• [U-Boot] [PATCH v3 2/6] net: phy: ar803x: Make RGMII Tx delays actually configurable for AR8035   Joe Hershberger
• [U-Boot] [PATCH v3 3/6] net: phy: ar803x: Use common functions for RGMII internal delays   Joe Hershberger
• [U-Boot] [PATCH v3 4/6] net: phy: ar803x: Explicitly disable RGMII delays   Joe Hershberger
• [U-Boot] [PATCH v3 5/6] net: phy: ar803x: Clarify the configuration of the CLK_25M output pin   Joe Hershberger
• [U-Boot] [PATCH v3 6/6] net: phy: ar803x: Clarify the intention of ar8021_config   Joe Hershberger
• [U-Boot] [PATCH 2/3] net: add higmacv300 Ethernet driver for HiSilicon platform   Joe Hershberger
  • [U-Boot] [PATCH 2/3] net: add higmacv300 Ethernet driver for HiSilicon platform   Shawn Guo
• [U-Boot] [PATCH 1/1] efi_loader: comments for efi_file_from_path()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] tpm: simplify: tpm_set_global_lock()   Heinrich Schuchardt
  • [U-Boot] [PATCH 1/1] tpm: simplify: tpm_set_global_lock()   Simon Glass
  • [U-Boot] [U-Boot,1/1] tpm: simplify: tpm_set_global_lock()   Tom Rini
• [U-Boot] [PATCH 1/1] efi_selftest: LoadImage from file device path   Heinrich Schuchardt
• [U-Boot] [PATCH v4 00/20] SF: Migrate to Linux SPI NOR framework   Vignesh R
  • [U-Boot] [PATCH v4 01/20] configs: Move CONFIG_SPI_FLASH into defconfigs   Vignesh R
  • [U-Boot] [PATCH v4 02/20] bitops: Fix GENMASK definition for Sandbox   Vignesh R
  • [U-Boot] [PATCH v4 03/20] spi: spi-mem: Allow use of spi_mem_exec_op for all SPI modes   Vignesh R
  • [U-Boot] [PATCH v4 04/20] spi: spi-mem: Extend spi_mem_adjust_op_size() to honor max xfer size   Vignesh R
  • [U-Boot] [PATCH v4 05/20] spi: spi-mem: Claim SPI bus before spi mem access   Vignesh R
  • [U-Boot] [PATCH v4 06/20] spi: Add non DM version of SPI_MEM   Vignesh R
  • [U-Boot] [PATCH v4 07/20] sh: bitops: add hweight*() macros   Vignesh R
  • [U-Boot] [PATCH v4 08/20] mtd: spi: Port SPI NOR framework from Linux   Vignesh R
  • [U-Boot] [PATCH v4 09/20] mtd: spi: spi-nor-core: Add SPI MEM support   Vignesh R
  • [U-Boot] [PATCH v4 10/20] mtd: spi: spi-nor-core: Add 4 Byte addressing support   Vignesh R
  • [U-Boot] [PATCH v4 11/20] mtd: spi: spi-nor-core: Add SFDP support   Vignesh R
  • [U-Boot] [PATCH v4 12/20] mtd: spi: spi-nor-core: Add back U-Boot specific features   Vignesh R
  • [U-Boot] [PATCH v4 13/20] mtd: spi: sf_probe: Add "jedec, spi-nor" compatible string   Vignesh R
  • [U-Boot] [PATCH v4 14/20] mtd: spi: Switch to new SPI NOR framework   Vignesh R
    • [U-Boot] [PATCH v4 14/20] mtd: spi: Switch to new SPI NOR framework   Adam Ford
      • [U-Boot] [PATCH v4 14/20] mtd: spi: Switch to new SPI NOR framework   Vignesh R
      • [U-Boot] [PATCH v4 14/20] mtd: spi: Switch to new SPI NOR framework   Adam Ford
      • [U-Boot] [PATCH v4 14/20] mtd: spi: Switch to new SPI NOR framework   Adam Ford
      • [U-Boot] [PATCH v4 14/20] mtd: spi: Switch to new SPI NOR framework   Vignesh R
  • [U-Boot] [PATCH v4 15/20] mtd: spi: Remove unused files   Vignesh R
  • [U-Boot] [PATCH v4 16/20] mtd: spi: Add lightweight SPI flash stack for SPL   Vignesh R
  • [U-Boot] [PATCH v4 17/20] spl: Kconfig: Enable SPI_FLASH_TINY by default for SPL   Vignesh R
  • [U-Boot] [PATCH v4 18/20] configs: Remove SF_DUAL_FLASH   Vignesh R
  • [U-Boot] [PATCH v4 19/20] configs: Don't use SPI_FLASH_BAR as default   Vignesh R
  • [U-Boot] [PATCH v4 20/20] MAINTAINERS: Add an entry for SPI NOR   Vignesh R
  • [U-Boot] [PATCH v4 00/20] SF: Migrate to Linux SPI NOR framework   Simon Goldschmidt
    • [U-Boot] [PATCH v4 00/20] SF: Migrate to Linux SPI NOR framework   Vignesh R
      • [U-Boot] [PATCH v4 00/20] SF: Migrate to Linux SPI NOR framework   Tom Rini
  • [U-Boot] [PATCH v4 00/20] SF: Migrate to Linux SPI NOR framework   Jagan Teki
    • [U-Boot] [PATCH v4 00/20] SF: Migrate to Linux SPI NOR framework   Vignesh R
      • [U-Boot] [PATCH v4 00/20] SF: Migrate to Linux SPI NOR framework   Boris Brezillon
      • [U-Boot] [PATCH v4 00/20] SF: Migrate to Linux SPI NOR framework   Boris Brezillon
• [U-Boot] [PATCH 1/2] armv8: emc2305: add support for fan controller   Meenakshi Aggarwal
  • [U-Boot] [PATCH 1/2] armv8: emc2305: add support for fan controller   Prabhakar Kushwaha
• [U-Boot] [PATCH v2] nand: fix up badblock skipping   Jiri Valek
• [U-Boot] None   Rosysong
• [U-Boot] [PATCH] rockchip: Remove rejected files with .rej suffix   Michal Simek
  • [U-Boot] [PATCH] rockchip: Remove rejected files with .rej suffix   Philipp Tomsich
  • [U-Boot] [PATCH] rockchip: Remove rejected files with .rej suffix   Philipp Tomsich
• [U-Boot] [PULL] Please pull u-boot-rockchip: tags/for-master-20190205   Philipp Tomsich
  • [U-Boot] [PULL] Please pull u-boot-rockchip: tags/for-master-20190205   Tom Rini
• [U-Boot] [PATCH] .gitignore: ignore patch rejects (*.rej) files   Philipp Tomsich
  • [U-Boot] [PATCH] .gitignore: ignore patch rejects (*.rej) files   Masahiro Yamada
    • [U-Boot] [PATCH] .gitignore: ignore patch rejects (*.rej) files   Philipp Tomsich
• [U-Boot] [PATCH 1/3] drivers: fix typo for pinctrl qca953x   Rosy Song
  • [U-Boot] [PATCH 1/3] drivers: fix typo for pinctrl qca953x   Daniel Schwierzeck
• [U-Boot] [PATCH 0/6] arm64: versal: Misc patches   Michal Simek
  • [U-Boot] [PATCH 1/6] arm64: versal: Disable showing information about console   Michal Simek
  • [U-Boot] [PATCH 2/6] arm64: versal: Define distro boot commnads for qspi ospi and mmc   Michal Simek
  • [U-Boot] [PATCH 3/6] arm64: versal: Define board_late_init for versal   Michal Simek
  • [U-Boot] [PATCH 4/6] arm64: versal: Remove one level of indentation in board_early_init_r()   Michal Simek
  • [U-Boot] [PATCH 5/6] arm64: versal: Move IOU_SWITCH_DIVISOR0 to Kconfig   Michal Simek
  • [U-Boot] [PATCH 6/6] arm64: versal: Add mini configuration for Versal   Michal Simek
• [U-Boot] [PATCH 2/3] drivers: add ethernet support for qca953x in ag7xxx driver   Rosy Song
  • [U-Boot] [PATCH 2/3] drivers: add ethernet support for qca953x in ag7xxx driver   Daniel Schwierzeck
• [U-Boot] [PATCH 3/3] mips: add ethernet support for qca953x referenced boards   Rosy Song
  • [U-Boot] [PATCH 3/3] mips: add ethernet support for qca953x referenced boards   Daniel Schwierzeck
• [U-Boot] [PATCH v2 0/7] arm/arm64: i2c platform cleanup   Michal Simek
• [U-Boot] [PATCH v2 1/7] ARM: zynq: Convert Syzygy to DM_I2C   Michal Simek
  • [U-Boot] [PATCH v2 1/7] ARM: zynq: Convert Syzygy to DM_I2C   Heiko Schocher
• [U-Boot] [PATCH v2 2/7] ARM: zynq: Convert dlc20 and zc70x board to DM_I2C   Michal Simek
  • [U-Boot] [PATCH v2 2/7] ARM: zynq: Convert dlc20 and zc70x board to DM_I2C   Heiko Schocher
• [U-Boot] [PATCH v2 3/7] ARM: zynq: Remove addresses for i2c controllers   Michal Simek
  • [U-Boot] [PATCH v2 3/7] ARM: zynq: Remove addresses for i2c controllers   Heiko Schocher
• [U-Boot] [PATCH v2 4/7] arm64: zynqmp: Switch all platfroms to DM_I2C   Michal Simek
  • [U-Boot] [PATCH v2 4/7] arm64: zynqmp: Switch all platfroms to DM_I2C   Heiko Schocher
• [U-Boot] [PATCH v2 5/7] arm64: zynqmp: Remove addresses for i2c controllers   Michal Simek
  • [U-Boot] [PATCH v2 5/7] arm64: zynqmp: Remove addresses for i2c controllers   Heiko Schocher
• [U-Boot] [PATCH v2 6/7] i2c: Remove ancient zynq_i2c driver   Michal Simek
  • [U-Boot] [PATCH v2 6/7] i2c: Remove ancient zynq_i2c driver   Heiko Schocher
• [U-Boot] [PATCH v2 7/7] xilinx: common: Remove !DM_i2C code for reading mac from eeprom   Michal Simek
  • [U-Boot] [PATCH v2 7/7] xilinx: common: Remove !DM_i2C code for reading mac from eeprom   Heiko Schocher
• [U-Boot] [PATCH] MAINTAINERS: update u-boot-atmel tree   Eugen.Hristev at microchip.com
  • [U-Boot] [PATCH] MAINTAINERS: update u-boot-atmel tree   Nicolas.Ferre at microchip.com
  • [U-Boot] MAINTAINERS: update u-boot-atmel tree   Tom Rini
• [U-Boot] [U-Boot, v2, 7/9] rockchip: defconfig: Clean the unused pinctrl config   Philipp Tomsich
  • [U-Boot] [U-Boot, v2, 7/9] rockchip: defconfig: Clean the unused pinctrl config   Emmanuel Vadot
• [U-Boot] [PATCH] rockchip: make_fit_atf: Use BL31 environ variable for file location   Emmanuel Vadot
  • [U-Boot] [PATCH] rockchip: make_fit_atf: Use BL31 environ variable for file location   Philipp Tomsich
    • [U-Boot] [PATCH] rockchip: make_fit_atf: Use BL31 environ variable for file location   Emmanuel Vadot
      • [U-Boot] [PATCH] rockchip: make_fit_atf: Use BL31 environ variable for file location   Mark Kettenis
    • [U-Boot] [PATCH] rockchip: make_fit_atf: Use BL31 environ variable for file location   Philipp Tomsich
• [U-Boot] [PATCH v1] x86: tangier: Add initial ACPI support for PMIC device   Andy Shevchenko
  • [U-Boot] [PATCH v1] x86: tangier: Add initial ACPI support for PMIC device   Bin Meng
    • [U-Boot] [PATCH v1] x86: tangier: Add initial ACPI support for PMIC device   Bin Meng
• [U-Boot] [PATCH 04/11] net: macb: Fix clk API usage for RISC-V systems   Anup Patel
• [U-Boot] [PATCH v4 0/7] AM65x: Add DMA support   Vignesh R
  • [U-Boot] [PATCH v4 1/7] firmware: ti_sci: Add support for NAVSS resource management   Vignesh R
  • [U-Boot] [PATCH v4 2/7] soc: ti: k3: add navss ringacc driver   Vignesh R
  • [U-Boot] [PATCH v4 3/7] soc: ti: k3: add CPPI5 description and helpers   Vignesh R
  • [U-Boot] [PATCH v4 4/7] dma: ti: add driver to K3 UDMA   Vignesh R
    • [U-Boot] [PATCH v4 4/7] dma: ti: add driver to K3 UDMA   Tom Rini
  • [U-Boot] [PATCH v4 5/7] soc: keystone: Merge into ti specific directory   Vignesh R
  • [U-Boot] [PATCH v4 6/7] arm64: dts: ti: k3-am65: add mcu navss nodes   Vignesh R
  • [U-Boot] [PATCH v4 7/7] configs: am65x_evm_a53: Enable DMA related configs   Vignesh R
• [U-Boot] eMMC boot partition possible with an eMMC 4.2 controller ?   Joakim Tjernlund
• [U-Boot] [PATCH] imx8qxp: Fix the reported CPU frequency   Fabio Estevam
  • [U-Boot] [PATCH] imx8qxp: Fix the reported CPU frequency   Fabio Estevam
• [U-Boot] [PATCH v2 07/11] clk: Add fixed-factor clock driver   Anup Patel
• [U-Boot] [PATCH v5 00/15] SiFive FU540 Support   Anup Patel
  • [U-Boot] [PATCH v5 01/15] .gitignore: Don't ignore arch/riscv/include/asm/arch   Anup Patel
  • [U-Boot] [PATCH v5 02/15] Makefile: Fix mrproper make target   Anup Patel
    • [U-Boot] [PATCH v5 02/15] Makefile: Fix mrproper make target   Simon Glass
      • [U-Boot] [PATCH v5 02/15] Makefile: Fix mrproper make target   Anup Patel
  • [U-Boot] [PATCH v5 03/15] riscv: Rename cpu/qemu to cpu/generic   Anup Patel
  • [U-Boot] [PATCH v5 04/15] riscv: Add asm/dma-mapping.h for DMA mappings   Anup Patel
  • [U-Boot] [PATCH v5 05/15] riscv: Add place-holder asm/arch/clk.h for driver compilation   Anup Patel
  • [U-Boot] [PATCH v5 06/15] riscv: generic: Ensure that U-Boot runs within 4GB for 64bit systems   Anup Patel
  • [U-Boot] [PATCH v5 07/15] net: macb: Fix clk API usage for RISC-V systems   Anup Patel
  • [U-Boot] [PATCH v5 08/15] net: macb: Fix GEM hardware detection   Anup Patel
  • [U-Boot] [PATCH v5 09/15] clk: Add SiFive FU540 PRCI clock driver   Anup Patel
  • [U-Boot] [PATCH v5 10/15] clk: Add fixed-factor clock driver   Anup Patel
    • [U-Boot] [PATCH v5 10/15] clk: Add fixed-factor clock driver   Simon Glass
      • [U-Boot] [PATCH v5 10/15] clk: Add fixed-factor clock driver   Anup Patel
  • [U-Boot] [PATCH v5 11/15] drivers: serial_sifive: Fix baud rate calculation   Anup Patel
  • [U-Boot] [PATCH v5 12/15] drivers: serial_sifive: Skip baudrate config if no input clock   Anup Patel
  • [U-Boot] [PATCH v5 13/15] cpu: Bind timer driver for boot hart   Anup Patel
  • [U-Boot] [PATCH v5 14/15] riscv: Add SiFive FU540 board support   Anup Patel
  • [U-Boot] [PATCH v5 15/15] doc: Add a readme guide for SiFive FU540   Anup Patel
  • [U-Boot] [PATCH v5 00/15] SiFive FU540 Support   Anup Patel
  • [U-Boot] [PATCH v5 00/15] SiFive FU540 Support   Anup Patel
• [U-Boot] [PATCH v4] arm64: mvebu: Add basic support for uDPU board   Stefan Roese
• [U-Boot] [PATCH 1/4 v3] pci: Add pci_get_devfn() to extract devfn from the fdt_pci_addr   Stefan Roese
• [U-Boot] [PATCH 3/4 v3] arm: mvebu: armada-xp/37x.dtsi: Sync PCIe DT nodes with Linux v4.20   Stefan Roese
• [U-Boot] [PATCH 4/4 v3] arm: mvebu: armada-xp-theadorable.dts: Enable PCIe DT nodes   Stefan Roese
• [U-Boot] [PATCH v2] video: Armada XP: Move driver to DM_VIDEO   Stefan Roese
• [U-Boot] [PATCH v2] arm: mvebu: theadorable: Enable video / LCD support with the new DM driver   Stefan Roese
• [U-Boot] Please pull u-boot-marvell/master   Stefan Roese
  • [U-Boot] Please pull u-boot-marvell/master   Tom Rini
  • [U-Boot] Please pull u-boot-marvell/master   Stefan Roese
    • [U-Boot] Please pull u-boot-marvell/master   Tom Rini
• [U-Boot] [PATCH] configs: tbs_a711: lower dram frequency   Tomas Novotny
  • [U-Boot] [PATCH] configs: tbs_a711: lower dram frequency   Jagan Teki
    • [U-Boot] [PATCH] configs: tbs_a711: lower dram frequency   Tomas Novotny
      • [U-Boot] [PATCH] configs: tbs_a711: lower dram frequency   Jagan Teki
• [U-Boot] [PATCH v2 00/13] Add Support for eMMC in AM65x-evm   Faiz Abbas
  • [U-Boot] [PATCH v2 01/13] arm64: dts: k3: Sync sdhci0 node from kernel   Faiz Abbas
  • [U-Boot] [PATCH v2 02/13] mmc: am654_mmc: Change driver name   Faiz Abbas
  • [U-Boot] [PATCH v2 03/13] mmc: am654_sdhci: Remove quirks   Faiz Abbas
  • [U-Boot] [PATCH v2 04/13] regmap: Add API regmap_init_mem_index()   Faiz Abbas
  • [U-Boot] [PATCH v2 05/13] regmap: Add support for polling on a register   Faiz Abbas
  • [U-Boot] [PATCH v2 06/13] mmc: sdhci: Add support for sdhci-caps-mask   Faiz Abbas
  • [U-Boot] [PATCH v2 07/13] mmc: sdhci: Make sdhci_set_clock() non static   Faiz Abbas
  • [U-Boot] [PATCH v2 08/13] arm: dts: k3: Add phy specific properties to SD card node   Faiz Abbas
  • [U-Boot] [PATCH v2 09/13] mmc: sdhci: Make set_ios_post() return int   Faiz Abbas
    • [U-Boot] [PATCH v2 09/13] mmc: sdhci: Make set_ios_post() return int   Tom Rini
      • [U-Boot] [PATCH v2 09/13] mmc: sdhci: Make set_ios_post() return int   Rizvi, Mohammad Faiz Abbas
  • [U-Boot] [PATCH v2 10/13] mmc: am654_sdhci: Add Support for PHY   Faiz Abbas
  • [U-Boot] [PATCH v2 11/13] configs: am65x_evm: Enable CONFIG_REGMAP   Faiz Abbas
  • [U-Boot] [PATCH v2 12/13] mmc: sdhci: Add support for HOST_CONTROL2 and setting UHS timings   Faiz Abbas
    • [U-Boot] [PATCH v2 12/13] mmc: sdhci: Add support for HOST_CONTROL2 and setting UHS timings   Tom Rini
  • [U-Boot] [PATCH v2 13/13] mmc: am654_sdhci: Add a platform specific set_control_reg() callback   Faiz Abbas
• [U-Boot] [PATCH v2 0/2] Load splash from FIT image (internal, external, offset)   Mark Jonas
  • [U-Boot] [PATCH v2 1/2] splash: Use splashfile instead of location->name   Mark Jonas
    • [U-Boot] [PATCH v2 1/2] splash: Use splashfile instead of location->name   Stefano Babic
    • [U-Boot] [PATCH v2 1/2] splash: Use splashfile instead of location->name   Melin Tomas
      • [U-Boot] [PATCH v2 1/2] splash: Use splashfile instead of location->name   Jonas Mark (BT-FIR/ENG1)
      • [U-Boot] [PATCH v2 1/2] splash: Use splashfile instead of location->name   Melin Tomas
      • [U-Boot] [PATCH v2 1/2] splash: Use splashfile instead of location->name   Stefano Babic
    • [U-Boot] [PATCH v2 1/2] splash: Use splashfile instead of location->name   Jonas Mark (BT-FIR/ENG1)
      • [U-Boot] [PATCH v2 1/2] splash: Use splashfile instead of location->name   Melin Tomas
    • [U-Boot] [PATCH v2 1/2] splash: Use splashfile instead of location->name   Melin Tomas
    • [U-Boot] [PATCH v2 1/2] splash: Use splashfile instead of location->name   Jonas Mark (BT-FIR/ENG1)
      • [U-Boot] [PATCH v2 1/2] splash: Use splashfile instead of location->name   Melin Tomas
  • [U-Boot] [PATCH v2 2/2] splash: Load internal and external data from FIT   Mark Jonas
    • [U-Boot] [PATCH v2 2/2] splash: Load internal and external data from FIT   Stefano Babic
• [U-Boot] [RFC][PATCH] cmd: pxe: Display splashscreen from extlinux.conf input   Patrice CHOTARD
• [U-Boot] [PATCH 1/1] dm: scsi: report correct device number   Heinrich Schuchardt
  • [U-Boot] [PATCH 1/1] dm: scsi: report correct device number   Simon Glass
  • [U-Boot] [U-Boot,1/1] dm: scsi: report correct device number   Tom Rini
• [U-Boot] Booting linux zImage on vexpress-a15   Andre Wagner
  • [U-Boot] Booting linux zImage on vexpress-a15   Liviu Dudau
    • [U-Boot] Booting linux zImage on vexpress-a15   Andre Wagner
      • [U-Boot] Booting linux zImage on vexpress-a15   Liviu Dudau
      • [U-Boot] Booting linux zImage on vexpress-a15   Andre Wagner
• [U-Boot] [PATCH 1/3] ARM: rmobile: Switch CPU to non-secure HYP mode for r8a7790 based boards   Marek Vasut
  • [U-Boot] [PATCH 1/3] ARM: rmobile: Switch CPU to non-secure HYP mode for r8a7790 based boards   Oleksandr
    • [U-Boot] [PATCH 1/3] ARM: rmobile: Switch CPU to non-secure HYP mode for r8a7790 based boards   Marek Vasut
      • [U-Boot] [PATCH 1/3] ARM: rmobile: Switch CPU to non-secure HYP mode for r8a7790 based boards   Oleksandr
      • [U-Boot] [PATCH 1/3] ARM: rmobile: Switch CPU to non-secure HYP mode for r8a7790 based boards   Oleksandr
      • [U-Boot] [PATCH 1/3] ARM: rmobile: Switch CPU to non-secure HYP mode for r8a7790 based boards   Marek Vasut
      • [U-Boot] [PATCH 1/3] ARM: rmobile: Switch CPU to non-secure HYP mode for r8a7790 based boards   Oleksandr
      • [U-Boot] [PATCH 1/3] ARM: rmobile: Switch CPU to non-secure HYP mode for r8a7790 based boards   Oleksandr
      • [U-Boot] [PATCH 1/3] ARM: rmobile: Switch CPU to non-secure HYP mode for r8a7790 based boards   Marek Vasut
      • [U-Boot] [PATCH 1/3] ARM: rmobile: Switch CPU to non-secure HYP mode for r8a7790 based boards   Marek Vasut
      • [U-Boot] [PATCH 1/3] ARM: rmobile: Switch CPU to non-secure HYP mode for r8a7790 based boards   Oleksandr
• [U-Boot] [PATCH 2/3] ARM: rmobile: Add basic PSCI support for r8a7790 SoC   Marek Vasut
  • [U-Boot] [PATCH 2/3] ARM: rmobile: Add basic PSCI support for r8a7790 SoC   Oleksandr
    • [U-Boot] [PATCH 2/3] ARM: rmobile: Add basic PSCI support for r8a7790 SoC   Marek Vasut
      • [U-Boot] [PATCH 2/3] ARM: rmobile: Add basic PSCI support for r8a7790 SoC   Oleksandr
      • [U-Boot] [PATCH 2/3] ARM: rmobile: Add basic PSCI support for r8a7790 SoC   Marek Vasut
      • [U-Boot] [PATCH 2/3] ARM: rmobile: Add basic PSCI support for r8a7790 SoC   Oleksandr
      • [U-Boot] [PATCH 2/3] ARM: rmobile: Add basic PSCI support for r8a7790 SoC   Oleksandr
      • [U-Boot] [PATCH 2/3] ARM: rmobile: Add basic PSCI support for r8a7790 SoC   Marek Vasut
      • [U-Boot] [PATCH 2/3] ARM: rmobile: Add basic PSCI support for r8a7790 SoC   Oleksandr Tyshchenko
• [U-Boot] [PATCH 3/3] ARM: rmobile: Add possibility to debug main PSCI commands   Marek Vasut
  • [U-Boot] [PATCH 3/3] ARM: rmobile: Add possibility to debug main PSCI commands   Oleksandr
    • [U-Boot] [PATCH 3/3] ARM: rmobile: Add possibility to debug main PSCI commands   Marek Vasut
• [U-Boot] [PATCH 1/3] board: engicam: Add watchdog support on Engicam   Shyam Saini
  • [U-Boot] [PATCH 2/3] configs: imx6qdl_icore_mmc: Enable watchdog and bootcounter   Shyam Saini
  • [U-Boot] [PATCH 3/3] include: configs: imx6-engicam: Add recovery boot option   Shyam Saini
• [U-Boot] [PATCH v2] arm: dts: am33xx: introduce 'am33xx-u-boot.dtsi'   Hannes Schmelzer
  • [U-Boot] [PATCH v2] arm: dts: am33xx: introduce 'am33xx-u-boot.dtsi'   Felix Brack
    • [U-Boot] [PATCH v2] arm: dts: am33xx: introduce 'am33xx-u-boot.dtsi'   Hannes Schmelzer
      • [U-Boot] [PATCH v2] arm: dts: am33xx: introduce 'am33xx-u-boot.dtsi'   Felix Brack
  • [U-Boot] [PATCH v2] arm: dts: am33xx: introduce 'am33xx-u-boot.dtsi'   Tom Rini
• [U-Boot] [PATCH] board/BuR/brxre1: convert do DM   Hannes Schmelzer
  • [U-Boot] board/BuR/brxre1: convert do DM   Tom Rini
• [U-Boot] [PATCH 2/3] arm: introduce _relaxed MMIO accessors   Philipp Tomsich
  • [U-Boot] [PATCH 2/3] arm: introduce _relaxed MMIO accessors   André Przywara
    • [U-Boot] [PATCH 2/3] arm: introduce _relaxed MMIO accessors   Philipp Tomsich
• [U-Boot] [PATCH 1/3] arm: clean up asm/io.h   Philipp Tomsich
• [U-Boot] [PATCH] fs: ext4: Unmount FS in do_fs_type()   Marek Vasut
  • [U-Boot] [PATCH] fs: ext4: Unmount FS in do_fs_type()   Simon Glass
• [U-Boot] [PATCH 1/2] mmc: Export {sd,mmc}_select_mode_and_width()   Marek Vasut
  • [U-Boot] [PATCH 2/2] mmc: tmio: renesas: Downgrade SD/MMC from UHS/HS200/HS400 modes before boot   Marek Vasut
• [U-Boot] [PATCH] mmc: Do not poll using CMD13 when changing timing   Marek Vasut
  • [U-Boot] [PATCH] mmc: Do not poll using CMD13 when changing timing   Jean-Jacques Hiblot
  • [U-Boot] [PATCH] mmc: Do not poll using CMD13 when changing timing   Lukasz Majewski
• [U-Boot] [PATCH 0/2] configs: Minor fixes   Alexander Dahl
• [U-Boot] [PATCH 1/2] configs: Remove version control leftovers   Alexander Dahl
  • [U-Boot] [PATCH 1/2] configs: Remove version control leftovers   Philipp Tomsich
• [U-Boot] [PATCH 2/2] configs: sama5d27_som1_ek: Activate misc init for uSD variant   Alexander Dahl
  • [U-Boot] [PATCH 2/2] configs: sama5d27_som1_ek: Activate misc init for uSD variant   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH] i2c: cdns: Covert to livetree function   Heiko Schocher
• [U-Boot] [PATCH 1/2] i2c: ihs: Get rid of fpgamap   Heiko Schocher
• [U-Boot] [PATCH 2/2] i2c: ihs: Improve error handling   Heiko Schocher
• [U-Boot] [PATCH v2 1/7] dm: core: Add of_alias_get_highest_id()   Heiko Schocher
  • [U-Boot] [PATCH v2 1/7] dm: core: Add of_alias_get_highest_id()   Simon Glass
  • [U-Boot] [PATCH v2 1/7] dm: core: Add of_alias_get_highest_id()   Heiko Schocher
• [U-Boot] [PATCH v2 2/7] fdt: Introduce fdtdec_get_alias_highest_id()   Heiko Schocher
  • [U-Boot] [PATCH v2 2/7] fdt: Introduce fdtdec_get_alias_highest_id()   Simon Glass
  • [U-Boot] [PATCH v2 2/7] fdt: Introduce fdtdec_get_alias_highest_id()   Heiko Schocher
• [U-Boot] [PATCH v2 3/7] dm: core: Introduce dev_read_alias_highest_id()   Heiko Schocher
  • [U-Boot] [PATCH v2 3/7] dm: core: Introduce dev_read_alias_highest_id()   Simon Glass
  • [U-Boot] [PATCH v2 3/7] dm: core: Introduce dev_read_alias_highest_id()   Heiko Schocher
• [U-Boot] [PATCH v2 4/7] dm: core: Add tests for dev_read_alias_highest_id()   Heiko Schocher
  • [U-Boot] [PATCH v2 4/7] dm: core: Add tests for dev_read_alias_highest_id()   Simon Glass
  • [U-Boot] [PATCH v2 4/7] dm: core: Add tests for dev_read_alias_highest_id()   Heiko Schocher
• [U-Boot] [PATCH v2 5/7] i2c: dm: Record maximum id of devices before probing devices   Heiko Schocher
  • [U-Boot] [PATCH v2 5/7] i2c: dm: Record maximum id of devices before probing devices   Heiko Schocher
• [U-Boot] [PATCH v2 6/7] i2c: Fill req_seq in i2c_post_bind()   Heiko Schocher
  • [U-Boot] [PATCH v2 6/7] i2c: Fill req_seq in i2c_post_bind()   Heiko Schocher
• [U-Boot] [PATCH] elf: fix cache flushing in 'bootelf -p' command   Kurban Mallachiev
  • [U-Boot] elf: fix cache flushing in 'bootelf -p' command   Tom Rini
• [U-Boot] [PATCH] Kconfig: fix BUILD_TARGET for ARCH_MVEBU   Baruch Siach
  • [U-Boot] [PATCH] Kconfig: fix BUILD_TARGET for ARCH_MVEBU   Stefan Roese
  • [U-Boot] [PATCH] Kconfig: fix BUILD_TARGET for ARCH_MVEBU   Jagan Teki
  • [U-Boot] [PATCH] Kconfig: fix BUILD_TARGET for ARCH_MVEBU   Stefan Roese
• [U-Boot] [PATCH v3 0/5] spi-flash: switch to "jedec, spi-nor" binding   Jagan Teki
  • [U-Boot] [PATCH v3 0/5] spi-flash: switch to "jedec, spi-nor" binding   Neil Armstrong
• [U-Boot] Pull request: u-boot-spi/master   Jagan Teki
  • [U-Boot] Pull request: u-boot-spi/master   Tom Rini
• [U-Boot] [PATCH v2 1/1] efi_selftest: LoadImage from file device path   Heinrich Schuchardt
• [U-Boot] [PATCH] arm: socfpga: move gen5 SDR driver to DM   Simon Goldschmidt
  • [U-Boot] [PATCH] arm: socfpga: move gen5 SDR driver to DM   Dalon L Westergreen
  • [U-Boot] [PATCH] arm: socfpga: move gen5 SDR driver to DM   Simon Goldschmidt
    • [U-Boot] [PATCH] arm: socfpga: move gen5 SDR driver to DM   Dalon L Westergreen
      • [U-Boot] [PATCH] arm: socfpga: move gen5 SDR driver to DM   Marek Vasut
      • [U-Boot] [PATCH] arm: socfpga: move gen5 SDR driver to DM   Dalon L Westergreen
      • [U-Boot] [PATCH] arm: socfpga: move gen5 SDR driver to DM   Simon Goldschmidt
  • [U-Boot] [PATCH] arm: socfpga: move gen5 SDR driver to DM   Marek Vasut
    • [U-Boot] [PATCH] arm: socfpga: move gen5 SDR driver to DM   Dinh Nguyen
      • [U-Boot] [PATCH] arm: socfpga: move gen5 SDR driver to DM   Simon Goldschmidt
  • [U-Boot] [PATCH] arm: socfpga: move gen5 SDR driver to DM   Simon Goldschmidt
    • [U-Boot] [PATCH] arm: socfpga: move gen5 SDR driver to DM   Simon Goldschmidt
• [U-Boot] [ANN] U-Boot v2019.04-rc1 released   Tom Rini
• [U-Boot] [PATCH 00/11] sound: Add sound support for Nyan   Simon Glass
  • [U-Boot] [PATCH 00/11] sound: Add sound support for Nyan   Jon Hunter
• [U-Boot] [PATCH v3 01/60] mpc83xx: Introduce ARCH_MPC830*   Mario Six
• [U-Boot] [PATCH] mtd: add spi flash id s25f064l   Heiko Schocher
  • [U-Boot] [PATCH] mtd: add spi flash id s25f064l   Vignesh R
• [U-Boot] [RFC v2 00/15] dm, efi: integrate efi objects into DM   AKASHI Takahiro
  • [U-Boot] [RFC v2 01/15] efi_loader: efi objects and protocols as DM devices   AKASHI Takahiro
    • [U-Boot] [RFC v2 01/15] efi_loader: efi objects and protocols as DM devices   Heinrich Schuchardt
      • [U-Boot] [RFC v2 01/15] efi_loader: efi objects and protocols as DM devices   AKASHI Takahiro
  • [U-Boot] [RFC v2 02/15] efi_loader: boottime: convert efi_loaded_image_obj to DM   AKASHI Takahiro
    • [U-Boot] [RFC v2 02/15] efi_loader: boottime: convert efi_loaded_image_obj to DM   Heinrich Schuchardt
      • [U-Boot] [RFC v2 02/15] efi_loader: boottime: convert efi_loaded_image_obj to DM   AKASHI Takahiro
      • [U-Boot] [RFC v2 02/15] efi_loader: boottime: convert efi_loaded_image_obj to DM   Heinrich Schuchardt
      • [U-Boot] [RFC v2 02/15] efi_loader: boottime: convert efi_loaded_image_obj to DM   AKASHI Takahiro
  • [U-Boot] [RFC v2 03/15] efi_loader: image_loader: aligned with DM   AKASHI Takahiro
  • [U-Boot] [RFC v2 04/15] efi_driver: rename UCLASS_EFI to UCLASS_EFI_DRIVER   AKASHI Takahiro
  • [U-Boot] [RFC v2 05/15] efi_loader: convert efi_root_node to DM   AKASHI Takahiro
  • [U-Boot] [RFC v2 06/15] efi_loader: device path: convert efi_device_path to DM   AKASHI Takahiro
  • [U-Boot] [RFC v2 07/15] efi_loader: unicode_collation: converted to DM   AKASHI Takahiro
  • [U-Boot] [RFC v2 08/15] efi_loader: console: convert efi console input/output to DM   AKASHI Takahiro
  • [U-Boot] [RFC v2 09/15] efi_loader: net: convert efi_net_obj to DM   AKASHI Takahiro
  • [U-Boot] [RFC v2 10/15] efi_loader: gop: convert efi_gop_obj to DM   AKASHI Takahiro
  • [U-Boot] [RFC v2 11/15] dm: blk: add UCLASS_PARTITION   AKASHI Takahiro
  • [U-Boot] [RFC v2 12/15] efi_loader: disk: convert efi_disk_obj to DM   AKASHI Takahiro
  • [U-Boot] [RFC v2 13/15] drivers: align block device drivers with DM-efi integration   AKASHI Takahiro
  • [U-Boot] [RFC v2 14/15] efi_driver: converted to DM   AKASHI Takahiro
  • [U-Boot] [RFC v2 15/15] cmd: efidebug: aligned with DM-efi integration   AKASHI Takahiro
  • [U-Boot] [RFC v2 00/15] dm, efi: integrate efi objects into DM   Heinrich Schuchardt
    • [U-Boot] [RFC v2 00/15] dm, efi: integrate efi objects into DM   Simon Glass
      • [U-Boot] [RFC v2 00/15] dm, efi: integrate efi objects into DM   AKASHI Takahiro
      • [U-Boot] [RFC v2 00/15] dm, efi: integrate efi objects into DM   Heinrich Schuchardt
  • [U-Boot] [RFC v2 00/15] dm, efi: integrate efi objects into DM   Simon Glass
    • [U-Boot] [RFC v2 00/15] dm, efi: integrate efi objects into DM   AKASHI Takahiro
  • [U-Boot] [RFC v2 00/15] dm, efi: integrate efi objects into DM   Simon Glass
    • [U-Boot] [RFC v2 00/15] dm, efi: integrate efi objects into DM   AKASHI Takahiro
• [U-Boot] [PATCH] drivers: net: ldpaa_eth: fix resource leak   Pankaj Bansal
  • [U-Boot] [PATCH] drivers: net: ldpaa_eth: fix resource leak   Joe Hershberger
• [U-Boot] [PATCH] drivers: net: ldpaa_eth: check if the dpmac is enabled   Pankaj Bansal
  • [U-Boot] [PATCH] drivers: net: ldpaa_eth: check if the dpmac is enabled   Prabhakar Kushwaha
    • [U-Boot] [PATCH] drivers: net: ldpaa_eth: check if the dpmac is enabled   Pankaj Bansal
• [U-Boot] [PATCH] cmd: date: Do not overwrite arguments   Roman Kapl
  • [U-Boot] cmd: date: Do not overwrite arguments   Tom Rini
• [U-Boot] i.MX HAB: U-Boot loading from SPI NOR flash   Fernando AE
  • [U-Boot] i.MX HAB: U-Boot loading from SPI NOR flash   Fernando AE
• [U-Boot] [PATCH v3 0/2] Load splash from FIT image (internal, external, offset)   Mark Jonas
  • [U-Boot] [PATCH v3 1/2] splash: Use splashfile instead of location->name   Mark Jonas
    • [U-Boot] [PATCH v3 1/2] splash: Use splashfile instead of location->name   Melin Tomas
  • [U-Boot] [PATCH v3 2/2] splash: Load internal and external data from FIT   Mark Jonas
• [U-Boot] [PATCH v1 1/2] configs: k2g_evm: Enable CONFIG_BLK   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v1 2/2] configs: Enable CONFIG_BLK in am57xx_evm and am57xx_hs_evm   Jean-Jacques Hiblot
    • [U-Boot] [PATCH v1 2/2] configs: Enable CONFIG_BLK in am57xx_evm and am57xx_hs_evm   Lokesh Vutla
    • [U-Boot] [U-Boot, v1, 2/2] configs: Enable CONFIG_BLK in am57xx_evm and am57xx_hs_evm   Tom Rini
  • [U-Boot] [PATCH v1 1/2] configs: k2g_evm: Enable CONFIG_BLK   Lokesh Vutla
  • [U-Boot] [PATCH v1 1/2] configs: k2g_evm: Enable CONFIG_BLK   Vignesh R
  • [U-Boot] [U-Boot,v1,1/2] configs: k2g_evm: Enable CONFIG_BLK   Tom Rini
• [U-Boot] [PATCH v2] mtd: add spi flash id s25fl064l   Heiko Schocher
  • [U-Boot] [PATCH v2] mtd: add spi flash id s25fl064l   Jagan Teki
  • [U-Boot] [PATCH v2] mtd: add spi flash id s25fl064l   Vignesh R
  • [U-Boot] [PATCH v2] mtd: add spi flash id s25fl064l   Jagan Teki
• [U-Boot] [PATCH v3 2/5] dts: switch spi-flash to jedec, spi-nor compatible   Patrick DELAUNAY
• [U-Boot] [PATCH v3 5/5] doc: device-tree-bindings: switch from spi-flash to jedec, spi-nor   Patrick DELAUNAY
• [U-Boot] [PULL] u-boot-sh/master   Marek Vasut
  • [U-Boot] [PULL] u-boot-sh/master   Tom Rini
    • [U-Boot] [PULL] u-boot-sh/master   Marek Vasut
      • [U-Boot] [PULL] u-boot-sh/master   Tom Rini
      • [U-Boot] [PULL] u-boot-sh/master   Marek Vasut
      • [U-Boot] [PULL] u-boot-sh/master   Marek Vasut
      • [U-Boot] [PULL] u-boot-sh/master   Tom Rini
  • [U-Boot] [PULL] u-boot-sh/master   Marek Vasut
    • [U-Boot] [PULL] u-boot-sh/master   Tom Rini
  • [U-Boot] [PULL] u-boot-sh/master   Marek Vasut
• [U-Boot] [PATCH v6] lx2160aqds : Add support for LX2160AQDS platform   Pankaj Bansal
  • [U-Boot] [PATCH v6] lx2160aqds : Add support for LX2160AQDS platform   Prabhakar Kushwaha
• [U-Boot] [U-Boot,1/3] stm32mp1: add trusted boot with TF-A   Tom Rini
• [U-Boot] cmd: image_info: Add checking of default FIT config   Tom Rini
• [U-Boot] [PATCH] configs: am57xx_evm: define CONFIG_SPL_LOAD_FIT_ADDRESS for SPL-DFU   Bin Liu
  • [U-Boot] configs: am57xx_evm: define CONFIG_SPL_LOAD_FIT_ADDRESS for SPL-DFU   Tom Rini
  • [U-Boot] [PATCH] configs: am57xx_evm: define CONFIG_SPL_LOAD_FIT_ADDRESS for SPL-DFU   Vignesh R
• [U-Boot] [PATCH v2 00/23] apalis imx6 fixes, device tree enablement and driver model conversion   Marcel Ziswiler
  • [U-Boot] [PATCH v2 01/23] apalis_imx6: get rid of obsolete nospl configurations   Marcel Ziswiler
  • [U-Boot] [PATCH v2 10/23] apalis_imx6: migrate pmic and regulator to using driver model   Marcel Ziswiler
  • [U-Boot] [PATCH v2 11/23] apalis_imx6: migrate mmc and sata to using driver model   Marcel Ziswiler
    • [U-Boot] [PATCH v2 11/23] apalis_imx6: migrate mmc and sata to using driver model   Soeren Moch
  • [U-Boot] [PATCH v2 12/23] apalis_imx6: migrate usb to using driver model   Marcel Ziswiler
  • [U-Boot] [PATCH v2 13/23] apalis_imx6: drop CONFIG_OF_SYSTEM_SETUP   Marcel Ziswiler
  • [U-Boot] [PATCH v2 14/23] apalis_imx6: add distroboot support   Marcel Ziswiler
  • [U-Boot] [PATCH v2 15/23] apalis_imx6: use both sd/mmc interfaces for setsdupdate   Marcel Ziswiler
  • [U-Boot] [PATCH v2 16/23] apalis_imx6: unify sd/mmc drive strength with linux kernel settings   Marcel Ziswiler
  • [U-Boot] [PATCH v2 19/23] apalis_imx6: revert fuse value set in mfgr_fuse   Marcel Ziswiler
  • [U-Boot] [PATCH v2 20/23] configs: apalis_imx6: Use ext4 file system by default   Marcel Ziswiler
  • [U-Boot] [PATCH v2 21/23] apalis_imx6: use SDP if USB serial downloader has been used   Marcel Ziswiler
  • [U-Boot] [PATCH v2 22/23] apalis_imx6: switch to zimage   Marcel Ziswiler
  • [U-Boot] [PATCH v2 23/23] board: apalis_imx6: check for and report ecc errors in fuses   Marcel Ziswiler
• [U-Boot] [PATCH v2 02/23] apalis_imx6: use distro defaults   Marcel Ziswiler
• [U-Boot] [PATCH v2 03/23] apalis_imx6: move console in env from header file to defconfig   Marcel Ziswiler
• [U-Boot] [PATCH v2 04/23] apalis_imx6: enable fit image, gpt, imx thermal, efi loader support   Marcel Ziswiler
• [U-Boot] [PATCH v2 05/23] apalis_imx6: remove obsolete USB_GADGET_MASS_STORAGE configuration   Marcel Ziswiler
• [U-Boot] [PATCH v2 06/23] apalis_imx6: migrate to using device tree   Marcel Ziswiler
• [U-Boot] [PATCH v2 07/23] apalis_imx6: clean-up and migrate gpios to using driver model   Marcel Ziswiler
• [U-Boot] [PATCH v2 08/23] apalis_imx6: enable pin control driver   Marcel Ziswiler
• [U-Boot] [PATCH v2 09/23] apalis_imx6: migrate i2c to using driver model   Marcel Ziswiler
• [U-Boot] [PATCH v2 17/23] apalis_imx6: pf0100: reorder and cleanup message printing   Marcel Ziswiler
• [U-Boot] [PATCH v2 18/23] apalis_imx6: disable ri and dcd irq in uarts   Marcel Ziswiler
• [U-Boot] [PATCH v2 0/4] stm32mp1: add trusted boot with TF-A   Patrick Delaunay
  • [U-Boot] [PATCH v2 3/4] stm32mp1: display board information   Patrick Delaunay
• [U-Boot] [PATCH v2 1/4] stm32mp1: add trusted boot with TF-A   Patrick Delaunay
• [U-Boot] [PATCH v2 2/4] stm32mp1: bsec: access with SMC for trusted boot   Patrick Delaunay
• [U-Boot] [PATCH v2 4/4] clk: stm32m1: add debug information   Patrick Delaunay
• [U-Boot] [PATCH v5 0/3] Add MMD PHY helpers   Carlo Caione
  • [U-Boot] [PATCH v5 1/3] net: phy: Add generic helpers to access MMD PHY registers   Carlo Caione
    • [U-Boot] [PATCH v5 1/3] net: phy: Add generic helpers to access MMD PHY registers   Joe Hershberger
  • [U-Boot] [PATCH v5 2/3] net: phy: ti: use generic helpers to access MMD registers   Carlo Caione
  • [U-Boot] [PATCH v5 3/3] cmd: mdio: Switch to generic helpers when accessing the registers   Carlo Caione
    • [U-Boot] [PATCH v5 3/3] cmd: mdio: Switch to generic helpers when accessing the registers   Vladimir Oltean
      • [U-Boot] [PATCH v5 3/3] cmd: mdio: Switch to generic helpers when accessing the registers   Vladimir Oltean
      • [U-Boot] [PATCH v5 3/3] cmd: mdio: Switch to generic helpers when accessing the registers   Carlo Caione
    • [U-Boot] [PATCH v5 3/3] cmd: mdio: Switch to generic helpers when accessing the registers   Joe Hershberger
• [U-Boot] [PATCH v3 0/3] stm32mp1: add trusted boot with TF-A   Patrick Delaunay
• [U-Boot] [PATCH v3 1/3] stm32mp1: add trusted boot with TF-A   Patrick Delaunay
• [U-Boot] [PATCH v3 2/3] stm32mp1: bsec: access with SMC for trusted boot   Patrick Delaunay
• [U-Boot] [PATCH v3 3/3] stm32mp1: display board information   Patrick Delaunay
• [U-Boot] [PATCH v1 00/26] colibri imx6 fixes, device tree enablement and driver model conversion   Marcel Ziswiler
  • [U-Boot] [PATCH v1 01/26] colibri_imx6: get rid of obsolete nospl configurations   Marcel Ziswiler
  • [U-Boot] [PATCH v1 08/26] colibri_imx6: enable pin control driver   Marcel Ziswiler
  • [U-Boot] [PATCH v1 13/26] colibri_imx6: drop CONFIG_OF_SYSTEM_SETUP   Marcel Ziswiler
  • [U-Boot] [PATCH v1 14/26] colibri_imx6: print also 64-bit IT   Marcel Ziswiler
  • [U-Boot] [PATCH v1 15/26] colibri_imx6: add distroboot support   Marcel Ziswiler
  • [U-Boot] [PATCH v1 16/26] colibri_imx6: unify sd/mmc drive strenght with linux kernel settings   Marcel Ziswiler
  • [U-Boot] [PATCH v1 17/26] colibri imx6: pf0100: reorder and cleanup message printing   Marcel Ziswiler
  • [U-Boot] [PATCH v1 18/26] colibri imx6: disable ri and dcd irq in uarts   Marcel Ziswiler
  • [U-Boot] [PATCH v1 19/26] colibri_imx6: change pmic fusing according to hw 1.1 requirements   Marcel Ziswiler
  • [U-Boot] [PATCH v1 20/26] colibri_imx6: revert fuse value set in mfgr_fuse   Marcel Ziswiler
  • [U-Boot] [PATCH v1 21/26] toradex: colibri_imx6: overwrite CMA memory set in device tree   Marcel Ziswiler
  • [U-Boot] [PATCH v1 22/26] configs: colibri_imx6: Use ext4 file system by default   Marcel Ziswiler
  • [U-Boot] [PATCH v1 23/26] colibri_imx6: use SDP if USB serial downloader has been used   Marcel Ziswiler
  • [U-Boot] [PATCH v1 24/26] colibri_imx6: switch to zimage   Marcel Ziswiler
    • [U-Boot] [PATCH v1 24/26] colibri_imx6: switch to zimage   Lukasz Majewski
      • [U-Boot] [PATCH v1 24/26] colibri_imx6: switch to zimage   Marcel Ziswiler
  • [U-Boot] [PATCH v1 25/26] colibri_imx6: added nreset gpio on reboot   Marcel Ziswiler
  • [U-Boot] [PATCH v1 26/26] board: colibri_imx6: check for and report ecc errors in fuses   Marcel Ziswiler
• [U-Boot] [PATCH v1 02/26] colibri_imx6: use distro defaults   Marcel Ziswiler
• [U-Boot] [PATCH v1 03/26] colibri_imx6: move console in env from header file to defconfig   Marcel Ziswiler
• [U-Boot] [PATCH v1 04/26] colibri_imx6: enable fit image, gpt, imx thermal, efi loader support   Marcel Ziswiler
• [U-Boot] [PATCH v1 05/26] colibri_imx6: remove obsolete USB_GADGET_MASS_STORAGE configuration   Marcel Ziswiler
• [U-Boot] [PATCH v1 06/26] colibri_imx6: migrate to using device tree   Marcel Ziswiler
• [U-Boot] [PATCH v1 07/26] colibri_imx6: clean-up and migrate gpios to using driver model   Marcel Ziswiler
• [U-Boot] [PATCH v1 09/26] colibri_imx6: migrate i2c to using driver model   Marcel Ziswiler
• [U-Boot] [PATCH v1 10/26] colibri_imx6: migrate pmic and regulator to using driver model   Marcel Ziswiler
• [U-Boot] [PATCH v1 11/26] colibri_imx6: migrate mmc to using driver model   Marcel Ziswiler
• [U-Boot] [PATCH v1 12/26] colibri_imx6: migrate usb to using driver model   Marcel Ziswiler
• [U-Boot] [PATCH v2 0/4] efi_loader: rework loading and starting of images   Heinrich Schuchardt
  • [U-Boot] [PATCH v2 1/4] efi_loader: LoadImage: always allocate new pages   Heinrich Schuchardt
  • [U-Boot] [PATCH v2 2/4] efi_loader: set entry point in efi_load_pe()   Heinrich Schuchardt
  • [U-Boot] [PATCH v2 3/4] efi_loader: use efi_start_image() for bootefi   Heinrich Schuchardt
• [U-Boot] [PATCH v2 4/4] efi_loader: clean up bootefi_test_prepare()   Heinrich Schuchardt
• [U-Boot] [U-Boot,v2] spl: implement CRC check on U-Boot uImage   Tom Rini
  • [U-Boot] [U-Boot,v2] spl: implement CRC check on U-Boot uImage   Simon Goldschmidt
    • [U-Boot] [U-Boot,v2] spl: implement CRC check on U-Boot uImage   Tom Rini
      • [U-Boot] [U-Boot,v2] spl: implement CRC check on U-Boot uImage   Simon Goldschmidt
      • [U-Boot] [U-Boot,v2] spl: implement CRC check on U-Boot uImage   Tom Rini
      • [U-Boot] [U-Boot,v2] spl: implement CRC check on U-Boot uImage   Simon Goldschmidt
      • [U-Boot] [U-Boot,v2] spl: implement CRC check on U-Boot uImage   Tom Rini
• [U-Boot] [U-Boot, 2/3] net: add higmacv300 Ethernet driver for HiSilicon platform   Tom Rini
  • [U-Boot] [U-Boot, 2/3] net: add higmacv300 Ethernet driver for HiSilicon platform   Shawn Guo
• [U-Boot] [PATCH v6 00/16] SiFive FU540 Support   Anup Patel
  • [U-Boot] [PATCH v6 01/16] .gitignore: Don't ignore arch/riscv/include/asm/arch   Anup Patel
    • [U-Boot] [PATCH v6 01/16] .gitignore: Don't ignore arch/riscv/include/asm/arch   Auer, Lukas
  • [U-Boot] [PATCH v6 02/16] Makefile: Fix mrproper make target   Anup Patel
    • [U-Boot] [PATCH v6 02/16] Makefile: Fix mrproper make target   Auer, Lukas
      • [U-Boot] [PATCH v6 02/16] Makefile: Fix mrproper make target   Tom Rini
      • [U-Boot] [PATCH v6 02/16] Makefile: Fix mrproper make target   Anup Patel
  • [U-Boot] [PATCH v6 03/16] riscv: Rename cpu/qemu to cpu/generic   Anup Patel
  • [U-Boot] [PATCH v6 04/16] riscv: Add asm/dma-mapping.h for DMA mappings   Anup Patel
  • [U-Boot] [PATCH v6 05/16] riscv: Add place-holder asm/arch/clk.h for driver compilation   Anup Patel
    • [U-Boot] [PATCH v6 05/16] riscv: Add place-holder asm/arch/clk.h for driver compilation   Auer, Lukas
    • [U-Boot] [PATCH v6 05/16] riscv: Add place-holder asm/arch/clk.h for driver compilation   Bin Meng
      • [U-Boot] [PATCH v6 05/16] riscv: Add place-holder asm/arch/clk.h for driver compilation   Anup Patel
  • [U-Boot] [PATCH v6 06/16] riscv: generic: Ensure that U-Boot runs within 4GB for 64bit systems   Anup Patel
  • [U-Boot] [PATCH v6 07/16] net: macb: Fix clk API usage for RISC-V systems   Anup Patel
  • [U-Boot] [PATCH v6 08/16] net: macb: Fix GEM hardware detection   Anup Patel
  • [U-Boot] [PATCH v6 09/16] clk: Add SiFive FU540 PRCI clock driver   Anup Patel
    • [U-Boot] [PATCH v6 09/16] clk: Add SiFive FU540 PRCI clock driver   Auer, Lukas
      • [U-Boot] [PATCH v6 09/16] clk: Add SiFive FU540 PRCI clock driver   Anup Patel
      • [U-Boot] [PATCH v6 09/16] clk: Add SiFive FU540 PRCI clock driver   Auer, Lukas
  • [U-Boot] [PATCH v6 10/16] clk: Add fixed-factor clock driver   Anup Patel
  • [U-Boot] [PATCH v6 11/16] drivers: serial_sifive: Fix baud rate calculation   Anup Patel
  • [U-Boot] [PATCH v6 12/16] drivers: serial_sifive: Skip baudrate config if no input clock   Anup Patel
  • [U-Boot] [PATCH v6 13/16] cpu: Bind timer driver for boot hart   Anup Patel
  • [U-Boot] [PATCH v6 14/16] riscv: Add SiFive FU540 board support   Anup Patel
  • [U-Boot] [PATCH v6 15/16] doc: Add a readme guide for SiFive FU540   Anup Patel
    • [U-Boot] [PATCH v6 15/16] doc: Add a readme guide for SiFive FU540   Auer, Lukas
      • [U-Boot] [PATCH v6 15/16] doc: Add a readme guide for SiFive FU540   Atish Patra
  • [U-Boot] [PATCH v6 16/16] riscv: Enable CONFIG_SYS_BOOT_RAMDISK_HIGH for using initrd   Anup Patel
    • [U-Boot] [PATCH v6 16/16] riscv: Enable CONFIG_SYS_BOOT_RAMDISK_HIGH for using initrd   Auer, Lukas
• [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   Heinrich Schuchardt
  • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   Philipp Tomsich
    • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   Philipp Tomsich
      • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   Heinrich Schuchardt
      • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   Philipp Tomsich
      • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   David Wu
      • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   Philipp Tomsich
      • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   David Wu
      • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   Philipp Tomsich
      • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   David Wu
      • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   Philipp Tomsich
      • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   Philipp Tomsich
      • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   David Wu
      • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   Philipp Tomsich
      • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   David Wu
      • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   Philipp Tomsich
      • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   David Wu
      • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   Philipp Tomsich
      • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   Heinrich Schuchardt
      • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   David Wu
      • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   Heinrich Schuchardt
      • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   Michael Nazzareno Trimarchi
      • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   Heinrich Schuchardt
      • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   David Wu
      • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   Heiko Stübner
      • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   Philipp Tomsich
      • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   Heiko Stübner
      • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   Heiko Stübner
      • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   Tom Rini
      • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   Heinrich Schuchardt
      • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   Tom Rini
      • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   Heinrich Schuchardt
      • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   Tom Rini
      • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   David Wu
  • [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken   Jack Mitchell
• [U-Boot] [PATCH 1/3] spi: Kconfig: Mark CONFIG_SPI as Legacy spi support   Jagan Teki
  • [U-Boot] [PATCH 2/3] mtd: spi: Kconfig: Update CONFIG_SPI_FLASH   Jagan Teki
    • [U-Boot] [PATCH 2/3] mtd: spi: Kconfig: Update CONFIG_SPI_FLASH   Vignesh R
      • [U-Boot] [PATCH 2/3] mtd: spi: Kconfig: Update CONFIG_SPI_FLASH   Jagan Teki
  • [U-Boot] [PATCH 3/3] mtd: spi: Kconfig: Select SPI_FLASH if DM_SPI_FLASH   Jagan Teki
    • [U-Boot] [PATCH 3/3] mtd: spi: Kconfig: Select SPI_FLASH if DM_SPI_FLASH   Vignesh R
      • [U-Boot] [PATCH 3/3] mtd: spi: Kconfig: Select SPI_FLASH if DM_SPI_FLASH   Jagan Teki
  • [U-Boot] [PATCH 1/3] spi: Kconfig: Mark CONFIG_SPI as Legacy spi support   Vignesh R
• [U-Boot] [U-Boot, v4, 1/1] avb: add support for named persistent values   Tom Rini
  • [U-Boot] [U-Boot, v4, 1/1] avb: add support for named persistent values   Igor Opaniuk
    • [U-Boot] [U-Boot, v4, 1/1] avb: add support for named persistent values   Tom Rini
      • [U-Boot] [U-Boot, v4, 1/1] avb: add support for named persistent values   Igor Opaniuk
      • [U-Boot] [U-Boot, v4, 1/1] avb: add support for named persistent values   Simon Glass
      • [U-Boot] [U-Boot, v4, 1/1] avb: add support for named persistent values   Igor Opaniuk
      • [U-Boot] [U-Boot, v4, 1/1] avb: add support for named persistent values   Igor Opaniuk
      • [U-Boot] [U-Boot, v4, 1/1] avb: add support for named persistent values   Simon Glass
      • [U-Boot] [U-Boot, v4, 1/1] avb: add support for named persistent values   Simon Glass
• [U-Boot] [PATCH 00/10] spi: Add Allwinner A31 SPI driver   Jagan Teki
  • [U-Boot] [PATCH 01/10] spi: sun4i: Poll for rxfifo empty   Jagan Teki
    • [U-Boot] [PATCH 01/10] spi: sun4i: Poll for rxfifo empty   André Przywara
  • [U-Boot] [PATCH 02/10] clk: sunxi: Implement SPI clocks, resets   Jagan Teki
    • [U-Boot] [PATCH 02/10] clk: sunxi: Implement SPI clocks, resets   André Przywara
  • [U-Boot] [PATCH 03/10] spi: sun4i: Simplify reg writes using set/clrbits_le32   Jagan Teki
    • [U-Boot] [PATCH 03/10] spi: sun4i: Simplify reg writes using set/clrbits_le32   André Przywara
      • [U-Boot] [PATCH 03/10] spi: sun4i: Simplify reg writes using set/clrbits_le32   Jagan Teki
  • [U-Boot] [PATCH 04/10] spi: sun4i: Access registers and bits via enum offsets   Jagan Teki
    • [U-Boot] [PATCH 04/10] spi: sun4i: Access registers and bits via enum offsets   André Przywara
  • [U-Boot] [PATCH 05/10] spi: sun4i: Support fifo_depth via drvdata   Jagan Teki
    • [U-Boot] [PATCH 05/10] spi: sun4i: Support fifo_depth via drvdata   André Przywara
  • [U-Boot] [PATCH 06/10] spi: sun4i: Add CLK support   Jagan Teki
    • [U-Boot] [PATCH 06/10] spi: sun4i: Add CLK support   André Przywara
      • [U-Boot] [PATCH 06/10] spi: sun4i: Add CLK support   Jagan Teki
  • [U-Boot] [PATCH 07/10] spi: sun4: Add A31 spi controller support   Jagan Teki
    • [U-Boot] [PATCH 07/10] spi: sun4: Add A31 spi controller support   André Przywara
      • [U-Boot] [PATCH 07/10] spi: sun4: Add A31 spi controller support   Chen-Yu Tsai
      • [U-Boot] [PATCH 07/10] spi: sun4: Add A31 spi controller support   Andre Przywara
      • [U-Boot] [PATCH 07/10] spi: sun4: Add A31 spi controller support   Jagan Teki
  • [U-Boot] [PATCH 08/10] spi: sun4i: Driver cleanup   Jagan Teki
    • [U-Boot] [PATCH 08/10] spi: sun4i: Driver cleanup   André Przywara
  • [U-Boot] [PATCH 09/10] spi: kconfig: Enable SUN4I_SPI by default if ARCH_SUNXI   Jagan Teki
    • [U-Boot] [PATCH 09/10] spi: kconfig: Enable SUN4I_SPI by default if ARCH_SUNXI   André Przywara
  • [U-Boot] [PATCH 10/10] board: sopine: Enable SPI/SPI-FLASH   Jagan Teki
    • [U-Boot] [PATCH 10/10] board: sopine: Enable SPI/SPI-FLASH   André Przywara
      • [U-Boot] [PATCH 10/10] board: sopine: Enable SPI/SPI-FLASH   Jagan Teki
• [U-Boot] [PATCH 0/4] Random small sunxi fixes   megous at megous.com
  • [U-Boot] [PATCH 1/4] sunxi: Fix build when CONFIG_CMD_NET is disabled   megous at megous.com
    • [U-Boot] [PATCH 1/4] sunxi: Fix build when CONFIG_CMD_NET is disabled   Tomas Novotny
      • [U-Boot] [PATCH 1/4] sunxi: Fix build when CONFIG_CMD_NET is disabled   Ondřej Jirman
  • [U-Boot] [PATCH 2/4] sunxi: Fix build when CONFIG_CMD_PXE or CONFIG_CMD_DHCP are disabled   megous at megous.com
    • [U-Boot] [PATCH 2/4] sunxi: Fix build when CONFIG_CMD_PXE or CONFIG_CMD_DHCP are disabled   Jagan Teki
  • [U-Boot] [PATCH 3/4] lib: decode_timing_property should return -NOENT when proprty is not found   megous at megous.com
    • [U-Boot] [PATCH 3/4] lib: decode_timing_property should return -NOENT when proprty is not found   Simon Glass
      • [U-Boot] [PATCH 3/4] lib: decode_timing_property should return -NOENT when proprty is not found   Ondřej Jirman
  • [U-Boot] [PATCH 4/4] power: axp818: Fix typo in axp_set_dldo   megous at megous.com
    • [U-Boot] [PATCH 4/4] power: axp818: Fix typo in axp_set_dldo   Jagan Teki
• [U-Boot] [PATCH] warp7: README: Adjust the binary name after DM conversion   Fabio Estevam
• [U-Boot] [PATCH v2] warp7: README: Adjust the binary name after DM conversion   Fabio Estevam
  • [U-Boot] [PATCH v2] warp7: README: Adjust the binary name after DM conversion   Bryan O'Donoghue
  • [U-Boot] [PATCH v2] warp7: README: Adjust the binary name after DM conversion   Bryan O'Donoghue
  • [U-Boot] [PATCH v2] warp7: README: Adjust the binary name after DM conversion   Joris Offouga
    • [U-Boot] [PATCH v2] warp7: README: Adjust the binary name after DM conversion   Fabio Estevam
• [U-Boot] [PATCH] arm: sunxi: Enable SPL/SPI boot for Olinuxino Lime2-eMMC boards   Jagan Teki
• [U-Boot] [PATCH] sf: Add support for Macronix mx25u12835f   Jagan Teki
• [U-Boot] [PATCH v2 1/2] distro_bootcmd: add spi flash boot command   Jagan Teki
  • [U-Boot] [PATCH v2 1/2] distro_bootcmd: add spi flash boot command   Oskari Lemmelä
• [U-Boot] [U-Boot, v3, 1/5] efi_loader: Initial HII database protocols   Heinrich Schuchardt
  • [U-Boot] [U-Boot, v3, 1/5] efi_loader: Initial HII database protocols   Alexander Graf
    • [U-Boot] [U-Boot, v3, 1/5] efi_loader: Initial HII database protocols   AKASHI Takahiro
• [U-Boot] [PATCH v3] dm: spi: Read default speed and mode values from DT   Jagan Teki
  • [U-Boot] [PATCH v3] dm: spi: Read default speed and mode values from DT   Patrick DELAUNAY
    • [U-Boot] [PATCH v3] dm: spi: Read default speed and mode values from DT   Jagan Teki
      • [U-Boot] [PATCH v3] dm: spi: Read default speed and mode values from DT   Patrick DELAUNAY
      • [U-Boot] [PATCH v3] dm: spi: Read default speed and mode values from DT   Patrick DELAUNAY
• [U-Boot] [PATCH] mtd: qspi: support read the flag status in fspi driver   Jagan Teki
  • [U-Boot] [PATCH] mtd: qspi: support read the flag status in fspi driver   Vignesh R
• [U-Boot] [PATCH] spi: qspi: Fix issue when booting with DDR mode   Jagan Teki
• [U-Boot] [PATCH 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1   Jagan Teki
  • [U-Boot] [PATCH 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1   Chen-Yu Tsai
    • [U-Boot] [PATCH 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1   Jagan Teki
      • [U-Boot] [PATCH 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1   Andre Przywara
      • [U-Boot] [PATCH 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1   Jagan Teki
      • [U-Boot] [PATCH 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1   Andre Przywara
      • [U-Boot] [PATCH 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1   Jagan Teki
      • [U-Boot] [PATCH 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1   Chen-Yu Tsai
      • [U-Boot] [PATCH 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1   Jagan Teki
      • [U-Boot] [PATCH 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1   Chen-Yu Tsai
      • [U-Boot] [PATCH 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1   Jagan Teki
• [U-Boot] [PATCH 1/1] efi_loader: fix EFI_FILE_PROTOCOL.GetInfo()   Heinrich Schuchardt
• [U-Boot] [RFT 0/8] exynos: Fix reboot on Odroid HC1   Krzysztof Kozlowski
  • [U-Boot] [RFT 1/8] exynos: Redo detection of revision when all resources are ready   Krzysztof Kozlowski
    • [U-Boot] [RFT 1/8] exynos: Redo detection of revision when all resources are ready   Lukasz Majewski
      • [U-Boot] [RFT 1/8] exynos: Redo detection of revision when all resources are ready   Krzysztof Kozlowski
      • [U-Boot] [RFT 1/8] exynos: Redo detection of revision when all resources are ready   Lukasz Majewski
      • [U-Boot] [RFT 1/8] exynos: Redo detection of revision when all resources are ready   Krzysztof Kozlowski
      • [U-Boot] [RFT 1/8] exynos: Redo detection of revision when all resources are ready   Minkyu Kang
  • [U-Boot] [RFT 2/8] exynos: Wait till ADC stabilizes before checking Odroid HC1 revision   Krzysztof Kozlowski
  • [U-Boot] [RFT 3/8] adc: exynos-adc: Fix wrong bit operation used to stop the ADC   Krzysztof Kozlowski
  • [U-Boot] [RFT 4/8] regulator: Add support for ramp delay   Krzysztof Kozlowski
    • [U-Boot] [RFT 4/8] regulator: Add support for ramp delay   Simon Glass
      • [U-Boot] [RFT 4/8] regulator: Add support for ramp delay   Krzysztof Kozlowski
  • [U-Boot] [RFT 5/8] power: regulator: s2mps11: Fix step for LDO27 and LDO35   Krzysztof Kozlowski
  • [U-Boot] [RFT 6/8] power: regulator: s2mps11: Add enable delay   Krzysztof Kozlowski
    • [U-Boot] [RFT 6/8] power: regulator: s2mps11: Add enable delay   Lukasz Majewski
      • [U-Boot] [RFT 6/8] power: regulator: s2mps11: Add enable delay   Krzysztof Kozlowski
  • [U-Boot] [RFT 7/8] arm: dts: exynos: Add supply for ADC block to Odroid XU3 family   Krzysztof Kozlowski
  • [U-Boot] [RFT 8/8] arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid XU3 family   Krzysztof Kozlowski
    • [U-Boot] [RFT 8/8] arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid XU3 family   Lukasz Majewski
• [U-Boot] [PATCH 1/1] lib: vsprintf: avoid overflow printing UTF16 strings   Heinrich Schuchardt
  • [U-Boot] [PATCH 1/1] lib: vsprintf: avoid overflow printing UTF16 strings   Simon Glass
• [U-Boot] [PATCH 1/1] efi_loader: fix EFI entry counting   Heinrich Schuchardt
  • [U-Boot] [PATCH 1/1] efi_loader: fix EFI entry counting   Heinrich Schuchardt
    • [U-Boot] [PATCH 1/1] efi_loader: fix EFI entry counting   Alexander Graf
• [U-Boot] Please pull u-boot-dm   Simon Glass
  • [U-Boot] Please pull u-boot-dm   Simon Glass
    • [U-Boot] Please pull u-boot-dm   Simon Glass
  • [U-Boot] Please pull u-boot-dm   Tom Rini
• [U-Boot] [PATCH v2 1/1] lib: vsprintf: avoid overflow printing UTF16 strings   Heinrich Schuchardt
  • [U-Boot] [PATCH v2 1/1] lib: vsprintf: avoid overflow printing UTF16 strings   Simon Glass
• [U-Boot] [PATCH v4 0/4] spi-flash: switch to "jedec, spi-nor" binding   Neil Armstrong
  • [U-Boot] [PATCH v4 1/4] dts: switch spi-flash to jedec, spi-nor compatible   Neil Armstrong
  • [U-Boot] [PATCH v4 2/4] x86: dts: switch spi-flash to jedec, spi-nor compatible   Neil Armstrong
  • [U-Boot] [PATCH v4 3/4] mtd: sf_probe: remove spi-flash compatible   Neil Armstrong
  • [U-Boot] [PATCH v4 4/4] doc: device-tree-bindings: switch from spi-flash to jedec, spi-nor   Neil Armstrong
  • [U-Boot] [PATCH v4 0/4] spi-flash: switch to "jedec, spi-nor" binding   Peter Robinson
    • [U-Boot] [PATCH v4 0/4] spi-flash: switch to "jedec, spi-nor" binding   Neil Armstrong
  • [U-Boot] [PATCH v4 0/4] spi-flash: switch to "jedec, spi-nor" binding   Jagan Teki
• [U-Boot] [U-Boot, V3, 1/6] watchdog: bcm6345: switch to raw I/O functions   Tom Rini
• [U-Boot] [U-Boot, V3, 2/6] watchdog: bcm6345: allow to use this driver on arm bcm6858   Tom Rini
• [U-Boot] [U-Boot,V3,3/6] dt: bcm6838: add watchdog   Tom Rini
• [U-Boot] [U-Boot,V3,4/6] dt: bcm6858: add watchdog   Tom Rini
• [U-Boot] [U-Boot, V3, 5/6] bcm968380gerg: enable watchdog and reboot with watchdog   Tom Rini
• [U-Boot] [U-Boot, V3, 6/6] bcm968580: enable watchdog and reboot with watchdog   Tom Rini
• [U-Boot] [U-Boot, v4, 1/5] defconfigs: dra7xx_hs_evm: Sync HS and non-HS defconfigs   Tom Rini
• [U-Boot] [U-Boot, v4, 2/5] defconfigs: am57xx_hs_evm: Sync HS and non-HS defconfigs   Tom Rini
• [U-Boot] [U-Boot, v4, 3/5] defconfigs: Add config for DRA7xx High Security EVM with USB Boot support   Tom Rini
• [U-Boot] [U-Boot, v4, 4/5] defconfigs: Add config for AM57xx High Security EVM with USB/UART Boot support   Tom Rini
• [U-Boot] [U-Boot, v4, 5/5] doc: ti-secure: Add ULO info for AM57xx/DRA7xx secure devices from TI   Tom Rini
• [U-Boot] [U-Boot, 1/1] test: provide unit test for memory functions   Tom Rini
• [U-Boot] omap3_cairo: remove empty #ifdef/#endif block   Tom Rini
• [U-Boot] [U-Boot, v3] moveconfig: add a second pass for empty #if/#endif blocks   Tom Rini
• [U-Boot] hashtable: fix environment variable corruption   Tom Rini
• [U-Boot] drivers: serial: dm: Enable DM_FLAG_PRE_RELOC in SBSA pl011 uart driver   Tom Rini
• [U-Boot] [U-Boot, 1/7] clk: stm32mp1: no more get ck_usbo_48m in device tree   Tom Rini
• [U-Boot] [U-Boot,2/7] clk: stm32mp1: add IPCC clock   Tom Rini
• [U-Boot] [U-Boot, 3/7] clk: stm32mp1: correct access to RCC_OCENSETR/RCC_OCENCLRR   Tom Rini
  • [U-Boot] [U-Boot, 3/7] clk: stm32mp1: correct access to RCC_OCENSETR/RCC_OCENCLRR   Tom Rini
• [U-Boot] [U-Boot, 4/7] clk: stm32mp1: recalculate counter when switching freq   Tom Rini
• [U-Boot] [U-Boot,5/7] clk: stm32mp1: add debug information   Tom Rini
• [U-Boot] [U-Boot,6/7] dts: stm32mp1: clock tree update   Tom Rini
• [U-Boot] [U-Boot, 7/7] clk: stm32mp1: correctly handle Clock Spreading Generator   Tom Rini
• [U-Boot] mmc: omap_hsmmc: Workaround errata regarding SDR104/HS200 tuning failures (i929)   Tom Rini
• [U-Boot] board/BuR/brppt1: drop DM_I2C_COMPAT   Tom Rini
• [U-Boot] initcall: Move to inline function   Tom Rini
• [U-Boot] [U-Boot,1/5] bcm63158: add initial support   Tom Rini
• [U-Boot] [U-Boot,2/5] bcm963158: add initial support   Tom Rini
• [U-Boot] [U-Boot, 3/5] watchdog: bcm6345: allow to use this driver on arm bcm63158   Tom Rini
• [U-Boot] [U-Boot,4/5] dt: bcm63158: add watchdog   Tom Rini
• [U-Boot] [U-Boot, 5/5] bcm963158: enable watchdog and reboot with watchdog   Tom Rini
• [U-Boot] fdt: support booting with dtb in Android image   Tom Rini
• [U-Boot] [RESEND PATCH 0/3] arm: Introduce writel/readl_relaxed accessors   Andre Przywara
  • [U-Boot] [RESEND PATCH 1/3] arm: clean up asm/io.h   Andre Przywara
    • [U-Boot] [RESEND PATCH 1/3] arm: clean up asm/io.h   Alexander Graf
  • [U-Boot] [RESEND PATCH 2/3] arm: introduce _relaxed MMIO accessors   Andre Przywara
    • [U-Boot] [RESEND PATCH 2/3] arm: introduce _relaxed MMIO accessors   Alexander Graf
  • [U-Boot] [RESEND PATCH 3/3] sunxi: H6: use writel_relaxed for DRAM timing register accesses   Andre Przywara
    • [U-Boot] [RESEND PATCH 3/3] sunxi: H6: use writel_relaxed for DRAM timing register accesses   Alexander Graf
• [U-Boot] [PATCH v2 09/11] drivers: serial_sifive: Skip baudrate config if no input clock   Auer, Lukas
• [U-Boot] Compiling UBOOT for MIPS (Reference AP143 board)   Joan Moreau
  • [U-Boot] Compiling UBOOT for MIPS (Reference AP143 board)   Joan Moreau
• [U-Boot] [PATCH v3] spl: implement CRC check on U-Boot uImage   Simon Goldschmidt
  • [U-Boot] [U-Boot,v3] spl: implement CRC check on U-Boot uImage   Tom Rini
• [U-Boot] [PATCH] ARM: mvebu: x530: use MV_DDR_FREQ_SAR   Chris Packham
  • [U-Boot] [PATCH] ARM: mvebu: x530: use MV_DDR_FREQ_SAR   Stefan Roese
  • [U-Boot] [PATCH] ARM: mvebu: x530: use MV_DDR_FREQ_SAR   Stefan Roese
• [U-Boot] [PATCH] Kconfig: mvebu: use SPL instead of SPL_BUILD   Chris Packham
• [U-Boot] [PATCH v7 00/15] SiFive FU540 Support   Anup Patel
  • [U-Boot] [PATCH v7 01/15] riscv: Enable create symlink using kconfig   Anup Patel
    • [U-Boot] [PATCH v7 01/15] riscv: Enable create symlink using kconfig   Bin Meng
  • [U-Boot] [PATCH v7 02/15] riscv: Rename cpu/qemu to cpu/generic   Anup Patel
  • [U-Boot] [PATCH v7 03/15] riscv: Add asm/dma-mapping.h for DMA mappings   Anup Patel
  • [U-Boot] [PATCH v7 04/15] riscv: Add place-holder asm/arch/clk.h for driver compilation   Anup Patel
    • [U-Boot] [PATCH v7 04/15] riscv: Add place-holder asm/arch/clk.h for driver compilation   Bin Meng
  • [U-Boot] [PATCH v7 05/15] riscv: generic: Ensure that U-Boot runs within 4GB for 64bit systems   Anup Patel
  • [U-Boot] [PATCH v7 06/15] net: macb: Fix clk API usage for RISC-V systems   Anup Patel
  • [U-Boot] [PATCH v7 07/15] net: macb: Fix GEM hardware detection   Anup Patel
  • [U-Boot] [PATCH v7 08/15] clk: Add SiFive FU540 PRCI clock driver   Anup Patel
  • [U-Boot] [PATCH v7 09/15] clk: Add fixed-factor clock driver   Anup Patel
  • [U-Boot] [PATCH v7 10/15] drivers: serial_sifive: Fix baud rate calculation   Anup Patel
  • [U-Boot] [PATCH v7 11/15] drivers: serial_sifive: Skip baudrate config if no input clock   Anup Patel
  • [U-Boot] [PATCH v7 12/15] cpu: Bind timer driver for boot hart   Anup Patel
  • [U-Boot] [PATCH v7 13/15] riscv: Add SiFive FU540 board support   Anup Patel
  • [U-Boot] [PATCH v7 14/15] doc: Add a readme guide for SiFive FU540   Anup Patel
    • [U-Boot] [PATCH v7 14/15] doc: Add a readme guide for SiFive FU540   Kevin Hilman
      • [U-Boot] [PATCH v7 14/15] doc: Add a readme guide for SiFive FU540   Atish Patra
      • [U-Boot] [PATCH v7 14/15] doc: Add a readme guide for SiFive FU540   Auer, Lukas
      • [U-Boot] [PATCH v7 14/15] doc: Add a readme guide for SiFive FU540   Atish Patra
      • [U-Boot] [PATCH v7 14/15] doc: Add a readme guide for SiFive FU540   Kevin Hilman
  • [U-Boot] [PATCH v7 15/15] riscv: Enable CONFIG_SYS_BOOT_RAMDISK_HIGH for using initrd   Anup Patel
  • [U-Boot] [PATCH v7 00/15] SiFive FU540 Support   Andreas Schwab
    • [U-Boot] [PATCH v7 00/15] SiFive FU540 Support   Anup Patel
      • [U-Boot] [PATCH v7 00/15] SiFive FU540 Support   Alexander Graf
      • [U-Boot] [PATCH v7 00/15] SiFive FU540 Support   Anup Patel
      • [U-Boot] [PATCH v7 00/15] SiFive FU540 Support   Alexander Graf
      • [U-Boot] [PATCH v7 00/15] SiFive FU540 Support   Andreas Schwab
      • [U-Boot] [PATCH v7 00/15] SiFive FU540 Support   Bin Meng
      • [U-Boot] [PATCH v7 00/15] SiFive FU540 Support   Andreas Schwab
      • [U-Boot] [PATCH v7 00/15] SiFive FU540 Support   Bin Meng
      • [U-Boot] [PATCH v7 00/15] SiFive FU540 Support   Alexander Graf
      • [U-Boot] [PATCH v7 00/15] SiFive FU540 Support   Andreas Schwab
      • [U-Boot] [PATCH v7 00/15] SiFive FU540 Support   Bin Meng
      • [U-Boot] [PATCH v7 00/15] SiFive FU540 Support   Anup Patel
      • [U-Boot] [PATCH v7 00/15] SiFive FU540 Support   Andreas Schwab
      • [U-Boot] [PATCH v7 00/15] SiFive FU540 Support   Auer, Lukas
      • [U-Boot] [PATCH v7 00/15] SiFive FU540 Support   Alexander Graf
      • [U-Boot] [PATCH v7 00/15] SiFive FU540 Support   Andreas Schwab
  • [U-Boot] [PATCH v7 00/15] SiFive FU540 Support   Kevin Hilman
    • [U-Boot] [PATCH v7 00/15] SiFive FU540 Support   Kevin Hilman
• [U-Boot] cl-som-am57x_defconfig will be dropped   Vignesh R
  • [U-Boot] cl-som-am57x_defconfig will be dropped   Uri Mashiach
• [U-Boot] [PATCH] pci: pci_mvebu: Add comment about missing of_n_addr_cells() call   Stefan Roese
• [U-Boot] [PATCH v3 1/2] fs: fat: dynamically allocate memory for temporary buffer   tien.fong.chee at intel.com
  • [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer   Tom Rini
    • [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer   Michal Simek
      • [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer   Chee, Tien Fong
      • [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer   Alexander Graf
      • [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer   Chee, Tien Fong
      • [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer   Marek Vasut
      • [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer   Alexander Graf
      • [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer   Marek Vasut
      • [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer   Alexander Graf
      • [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer   Marek Vasut
      • [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer   Michal Simek
      • [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer   Marek Vasut
      • [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer   Adam Ford
      • [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer   Tom Rini
      • [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer   Chee, Tien Fong
      • [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer   Michal Simek
      • [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer   Chee, Tien Fong
• [U-Boot] [PATCH v3 2/2] fs: fat: Reduce default max clustersize 64KiB from malloc pool   tien.fong.chee at intel.com
  • [U-Boot] [U-Boot, v3, 2/2] fs: fat: Reduce default max clustersize 64KiB from malloc pool   Tom Rini
• [U-Boot] [PATCH v2 00/13] net: Add Allwinner EMAC CLK, RESET support   Jagan Teki
  • [U-Boot] [PATCH v2 01/13] clk: sunxi: Implement A10 EMAC clocks   Jagan Teki
  • [U-Boot] [PATCH v2 02/13] net: sunxi_emac: Add CLK support   Jagan Teki
  • [U-Boot] [PATCH v2 03/13] net: sun8i_emac: Retrieve GMAC clock via 'syscon' phandle   Jagan Teki
  • [U-Boot] [PATCH v2 04/13] clk: Get the CLK by index without device   Jagan Teki
    • [U-Boot] [PATCH v2 04/13] clk: Get the CLK by index without device   Simon Glass
  • [U-Boot] [PATCH v2 05/13] clk: Use clk_get_by_index_tail()   Jagan Teki
    • [U-Boot] [PATCH v2 05/13] clk: Use clk_get_by_index_tail()   Simon Glass
  • [U-Boot] [PATCH v2 06/13] test/dm: clk: Add clk_get_by_index[_nodev] test   Jagan Teki
    • [U-Boot] [PATCH v2 06/13] test/dm: clk: Add clk_get_by_index[_nodev] test   Simon Glass
  • [U-Boot] [PATCH v2 07/13] reset: Get the RESET by index without device   Jagan Teki
    • [U-Boot] [PATCH v2 07/13] reset: Get the RESET by index without device   Simon Glass
  • [U-Boot] [PATCH v2 08/13] test/dm: reset: Add reset_get_by_index[_nodev] test   Jagan Teki
    • [U-Boot] [PATCH v2 08/13] test/dm: reset: Add reset_get_by_index[_nodev] test   Simon Glass
  • [U-Boot] [PATCH v2 09/13] clk: sunxi: Implement EMAC, GMAC clocks, resets   Jagan Teki
  • [U-Boot] [PATCH v2 10/13] net: sun8i_emac: Add CLK and RESET support   Jagan Teki
  • [U-Boot] [PATCH v2 11/13] clk: sunxi: h3: Implement EPHY CLK and RESET   Jagan Teki
  • [U-Boot] [PATCH v2 12/13] net: sun8i_emac: Add EPHY CLK and RESET support   Jagan Teki
  • [U-Boot] [PATCH v2 13/13] board: sunxi: gmac: Remove Ethernet clock and reset   Jagan Teki
• [U-Boot] [PATCH] configs: at91: remove SPL_GENERATE_ATMEL_PMECC_HEADER from non-nand configs   Eugen.Hristev at microchip.com
  • [U-Boot] [PATCH] configs: at91: remove SPL_GENERATE_ATMEL_PMECC_HEADER from non-nand configs   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH] sun50i: h5: Orange Pi Zero Plus: Fix SdCard detection   Jagan Teki
• [U-Boot] [PATCH] pci: Add comment to mention difference in DEVFN usage in U-Boot vs Linux   Stefan Roese
  • [U-Boot] [PATCH] pci: Add comment to mention difference in DEVFN usage in U-Boot vs Linux   Simon Glass
• [U-Boot] [PATCH 0/2] ti_qspi: Move to spi-mem framework   Vignesh R
  • [U-Boot] [PATCH 1/2] spi: ti_qspi: Drop non DM code   Vignesh R
    • [U-Boot] [PATCH 1/2] spi: ti_qspi: Drop non DM code   Tom Rini
  • [U-Boot] [PATCH 2/2] spi: ti_qspi: Convert to spi-mem ops   Vignesh R
    • [U-Boot] [PATCH 2/2] spi: ti_qspi: Convert to spi-mem ops   Tom Rini
• [U-Boot] PMIC initialization   Jeroen van der Laan
  • [U-Boot] PMIC initialization   Lukasz Majewski
• [U-Boot] [REGRESSION] tegra124: nyan-big: LPAE not working   Thierry Reding
  • [U-Boot] [REGRESSION] tegra124: nyan-big: LPAE not working   Tristan Bastian
  • [U-Boot] [REGRESSION] tegra124: nyan-big: LPAE not working   Stephen Warren
    • [U-Boot] [REGRESSION] tegra124: nyan-big: LPAE not working   Marcel Ziswiler
• [U-Boot] [PATCH] dm: remove pre reloc properties in SPL and TPL device tree   Patrick Delaunay
• [U-Boot] [PATCH] configs/clearfog_gt_8k: add network interface support   Baruch Siach
  • [U-Boot] [PATCH] configs/clearfog_gt_8k: add network interface support   Stefan Roese
• [U-Boot] [PATCH] dtbo: Fix dtbo generation rules   Michal Simek
  • [U-Boot] [PATCH] dtbo: Fix dtbo generation rules   Michal Simek
  • [U-Boot] dtbo: Fix dtbo generation rules   Tom Rini
• [U-Boot] [PATCH] board: ti: Move fastboot functions out of TI_SECURE_DEVICE ifdef   Andrew F. Davis
  • [U-Boot] [PATCH] board: ti: Move fastboot functions out of TI_SECURE_DEVICE ifdef   Lokesh Vutla
• [U-Boot] [PATCH] arm: Leave smccc calls in .text when efi_loader=n   Alexander Graf
  • [U-Boot] [PATCH] arm: Leave smccc calls in .text when efi_loader=n   Michal Simek
• [U-Boot] [PATCH] efi_loader: Do not expose HII protocols yet   Alexander Graf
• [U-Boot] [PATCH] bcm963158: use TARGET_BCM963158 instead of ARCH_BCM63158   Philippe Reynes
  • [U-Boot] bcm963158: use TARGET_BCM963158 instead of ARCH_BCM63158   Tom Rini
• [U-Boot] [PATCH v2] efi_loader: Do not expose HII protocols yet   Alexander Graf
• [U-Boot] [PATCH v3] efi_loader: Make HII a config option   Alexander Graf
• [U-Boot] Please pull from u-boot-i2c   Heiko Schocher
  • [U-Boot] Please pull from u-boot-i2c   Tom Rini
• [U-Boot] [ANN] Monthly developer call   Tom Rini
  • [U-Boot] [ANN] Monthly developer call   Jagan Teki
    • [U-Boot] [ANN] Monthly developer call   Tom Rini
      • [U-Boot] [ANN] Monthly developer call   Marek Vasut
      • [U-Boot] [ANN] Monthly developer call   Tom Rini
      • [U-Boot] [ANN] Monthly developer call   Marek Vasut
• [U-Boot] [PATCH 0/7] Add netcp networking support on K2G ICE EVM   Murali Karicheri
  • [U-Boot] [PATCH 1/7] ARM: k2g-ice: Add pinmux support for rgmii interface   Murali Karicheri
    • [U-Boot] [PATCH 1/7] ARM: k2g-ice: Add pinmux support for rgmii interface   Lokesh Vutla
  • [U-Boot] [PATCH 2/7] ARM: k2g-gp-evm: update to rgmii pinmux configuration   Murali Karicheri
    • [U-Boot] [PATCH 2/7] ARM: k2g-gp-evm: update to rgmii pinmux configuration   Lokesh Vutla
  • [U-Boot] [PATCH 3/7] net: netcp: add support for phy with rgmii ids   Murali Karicheri
  • [U-Boot] [PATCH 4/7] ARM: k2g: add a workaround to reset the phy   Murali Karicheri
  • [U-Boot] [PATCH 5/7] k2g: config enable ti phy dp83867 for k2g   Murali Karicheri
  • [U-Boot] [PATCH 6/7] ARM: dts: k2g-evm: remove unused phy-mode property from phy node   Murali Karicheri
  • [U-Boot] [PATCH 7/7] ARM: dts: k2g-ice: add dt node for netcp   Murali Karicheri
  • [U-Boot] [PATCH 0/7] Add netcp networking support on K2G ICE EVM   Murali Karicheri
    • [U-Boot] [PATCH 1/7] ARM: k2g-ice: Add pinmux support for rgmii interface   Murali Karicheri
    • [U-Boot] [PATCH 2/7] ARM: k2g-gp-evm: update to rgmii pinmux configuration   Murali Karicheri
    • [U-Boot] [PATCH 3/7] net: netcp: add support for phy with rgmii ids   Murali Karicheri
    • [U-Boot] [PATCH 4/7] ARM: k2g: add a workaround to reset the phy   Murali Karicheri
    • [U-Boot] [PATCH 5/7] k2g: config enable ti phy dp83867 for k2g   Murali Karicheri
    • [U-Boot] [PATCH 6/7] ARM: dts: k2g-evm: remove unused phy-mode property from phy node   Murali Karicheri
    • [U-Boot] [PATCH 7/7] ARM: dts: k2g-ice: add dt node for netcp   Murali Karicheri
    • [U-Boot] [PATCH 0/7] Add netcp networking support on K2G ICE EVM   Murali Karicheri
• [U-Boot] [PATCH 1/1] test: call hexdump tests via `ut lib`   Heinrich Schuchardt
  • [U-Boot] [PATCH 1/1] test: call hexdump tests via `ut lib`   Simon Goldschmidt
• [U-Boot] [PATCH] test: call lmb tests vi 'ut lib'   Simon Goldschmidt
  • [U-Boot] [PATCH] test: call lmb tests vi 'ut lib'   Heinrich Schuchardt
    • [U-Boot] [PATCH] test: call lmb tests vi 'ut lib'   Simon Goldschmidt
• [U-Boot] [RFC 1/9] Arm: dts: imx7d-pico: Import Linux pico-pi dts   Fabio Estevam
• [U-Boot] [U-Boot,v2,11/23] spl: Add a comment to spl_set_bd()   Simon Goldschmidt
  • [U-Boot] [U-Boot,v2,11/23] spl: Add a comment to spl_set_bd()   Simon Glass
    • [U-Boot] [U-Boot,v2,11/23] spl: Add a comment to spl_set_bd()   Simon Goldschmidt
• [U-Boot] [PATCH 0/7] SMP support for RISC-V   Lukas Auer
  • [U-Boot] [PATCH 1/7] riscv: add infrastructure for calling functions on other harts   Lukas Auer
    • [U-Boot] [PATCH 1/7] riscv: add infrastructure for calling functions on other harts   Anup Patel
      • [U-Boot] [PATCH 1/7] riscv: add infrastructure for calling functions on other harts   Auer, Lukas
      • [U-Boot] [PATCH 1/7] riscv: add infrastructure for calling functions on other harts   Rick Chen
      • [U-Boot] [PATCH 1/7] riscv: add infrastructure for calling functions on other harts   Anup Patel
      • [U-Boot] [PATCH 1/7] riscv: add infrastructure for calling functions on other harts   Auer, Lukas
    • [U-Boot] [PATCH 1/7] riscv: add infrastructure for calling functions on other harts   Bin Meng
      • [U-Boot] [PATCH 1/7] riscv: add infrastructure for calling functions on other harts   Auer, Lukas
    • [U-Boot] [PATCH 1/7] riscv: add infrastructure for calling functions on other harts   Anup Patel
      • [U-Boot] [PATCH 1/7] riscv: add infrastructure for calling functions on other harts   Auer, Lukas
      • [U-Boot] [PATCH 1/7] riscv: add infrastructure for calling functions on other harts   Auer, Lukas
      • [U-Boot] [PATCH 1/7] riscv: add infrastructure for calling functions on other harts   Anup Patel
      • [U-Boot] [PATCH 1/7] riscv: add infrastructure for calling functions on other harts   Auer, Lukas
      • [U-Boot] [PATCH 1/7] riscv: add infrastructure for calling functions on other harts   Anup Patel
      • [U-Boot] [PATCH 1/7] riscv: add infrastructure for calling functions on other harts   Auer, Lukas
  • [U-Boot] [PATCH 2/7] riscv: import the supervisor binary interface header file   Lukas Auer
    • [U-Boot] [PATCH 2/7] riscv: import the supervisor binary interface header file   Anup Patel
    • [U-Boot] [PATCH 2/7] riscv: import the supervisor binary interface header file   Bin Meng
  • [U-Boot] [PATCH 3/7] riscv: implement IPI platform functions using SBI   Lukas Auer
    • [U-Boot] [PATCH 3/7] riscv: implement IPI platform functions using SBI   Anup Patel
    • [U-Boot] [PATCH 3/7] riscv: implement IPI platform functions using SBI   Bin Meng
  • [U-Boot] [PATCH 4/7] riscv: delay initialization of caches and debug UART   Lukas Auer
    • [U-Boot] [PATCH 4/7] riscv: delay initialization of caches and debug UART   Anup Patel
    • [U-Boot] [PATCH 4/7] riscv: delay initialization of caches and debug UART   Bin Meng
  • [U-Boot] [PATCH 5/7] riscv: add support for multi-hart systems   Lukas Auer
    • [U-Boot] [PATCH 5/7] riscv: add support for multi-hart systems   Anup Patel
      • [U-Boot] [PATCH 5/7] riscv: add support for multi-hart systems   Auer, Lukas
    • [U-Boot] [PATCH 5/7] riscv: add support for multi-hart systems   Rick Chen
      • [U-Boot] [PATCH 5/7] riscv: add support for multi-hart systems   Auer, Lukas
  • [U-Boot] [PATCH 6/7] riscv: boot images passed to bootm on all harts   Lukas Auer
    • [U-Boot] [PATCH 6/7] riscv: boot images passed to bootm on all harts   Anup Patel
    • [U-Boot] [PATCH 6/7] riscv: boot images passed to bootm on all harts   Bin Meng
  • [U-Boot] [PATCH 7/7] riscv: qemu: enable SMP   Lukas Auer
    • [U-Boot] [PATCH 7/7] riscv: qemu: enable SMP   Anup Patel
    • [U-Boot] [PATCH 7/7] riscv: qemu: enable SMP   Bin Meng
  • [U-Boot] [PATCH 0/7] SMP support for RISC-V   Philipp Tomsich
    • [U-Boot] [PATCH 0/7] SMP support for RISC-V   Auer, Lukas
• [U-Boot] [PATCH] riscv: fu540: enable SMP   Lukas Auer
  • [U-Boot] [PATCH] riscv: fu540: enable SMP   Anup Patel
    • [U-Boot] [PATCH] riscv: fu540: enable SMP   Auer, Lukas
• [U-Boot] FW: [PATCHv3 00/11] pci: Add PCIe Gen4 controller driver for NXP Layerscape SoCs   Prabhakar Kushwaha
  • [U-Boot] FW: [PATCHv3 00/11] pci: Add PCIe Gen4 controller driver for NXP Layerscape SoCs   Bin Meng
• [U-Boot] [PATCH 1/8] armv8: fsl-layerscpae: correct the PCIe controllers' region size   Bin Meng
  • [U-Boot] [PATCH 1/8] armv8: fsl-layerscpae: correct the PCIe controllers' region size   Z.q. Hou
• [U-Boot] [PATCHv3 08/11] armv8: lx2160a: enable the pci command   Bin Meng
  • [U-Boot] [PATCHv3 08/11] armv8: lx2160a: enable the pci command   Z.q. Hou
• [U-Boot] [RFC] ARM: omap3_logic_somlv: Enable OF_CONTROL in SPL   Adam Ford
  • [U-Boot] [RFC] ARM: omap3_logic_somlv: Enable OF_CONTROL in SPL   Tom Rini
    • [U-Boot] [RFC] ARM: omap3_logic_somlv: Enable OF_CONTROL in SPL   Tom Rini
• [U-Boot] [PATCHv3 10/11] pci: ls_pcie_g4: Add Workaround for A-011451   Bin Meng
  • [U-Boot] [PATCHv3 10/11] pci: ls_pcie_g4: Add Workaround for A-011451   Z.q. Hou
    • [U-Boot] [PATCHv3 10/11] pci: ls_pcie_g4: Add Workaround for A-011451   Bin Meng
      • [U-Boot] [PATCHv3 10/11] pci: ls_pcie_g4: Add Workaround for A-011451   Z.q. Hou
      • [U-Boot] [PATCHv3 10/11] pci: ls_pcie_g4: Add Workaround for A-011451   Bin Meng
      • [U-Boot] [PATCHv3 10/11] pci: ls_pcie_g4: Add Workaround for A-011451   Z.q. Hou
      • [U-Boot] [PATCHv3 10/11] pci: ls_pcie_g4: Add Workaround for A-011451   Bin Meng
      • [U-Boot] [PATCHv3 10/11] pci: ls_pcie_g4: Add Workaround for A-011451   Z.q. Hou
• [U-Boot] Please pull u-boot-x86   Bin Meng
  • [U-Boot] Please pull u-boot-x86   Tom Rini
  • [U-Boot] Please pull u-boot-x86   Bin Meng
    • [U-Boot] Please pull u-boot-x86   Tom Rini
• [U-Boot] [PATCH 2/2] xilinx: common: Add support for DM_I2C zynq_board_read_rom_ethaddr()   Mike Looijmans
• [U-Boot] [PATCH v1 0/2] Allow platform specific service handling on PSCI   chee.hong.ang at intel.com
  • [U-Boot] [PATCH v1 1/2] ARMv8: Allow SiP service extensions on top of PSCI code   chee.hong.ang at intel.com
  • [U-Boot] [PATCH v1 2/2] ARMv8: Disable fwcall when PSCI is enabled   chee.hong.ang at intel.com
  • [U-Boot] [PATCH v1 0/2] Allow platform specific service handling on PSCI   Ang, Chee Hong
• [U-Boot] [PATCH][v3] board/lx2160ardb: Add distro boot support   Priyanka Jain
  • [U-Boot] [PATCH][v3] board/lx2160ardb: Add distro boot support   Prabhakar Kushwaha
• [U-Boot] [PATCH v3 00/13] Add Support for eMMC in AM65x-evm   Faiz Abbas
  • [U-Boot] [PATCH v3 01/13] arm64: dts: k3: Sync sdhci0 node from kernel   Faiz Abbas
    • [U-Boot] [PATCH v3 01/13] arm64: dts: k3: Sync sdhci0 node from kernel   Lokesh Vutla
  • [U-Boot] [PATCH v3 02/13] mmc: am654_mmc: Change driver name   Faiz Abbas
  • [U-Boot] [PATCH v3 03/13] mmc: am654_sdhci: Remove quirks   Faiz Abbas
  • [U-Boot] [PATCH v3 04/13] regmap: Add API regmap_init_mem_index()   Faiz Abbas
  • [U-Boot] [PATCH v3 05/13] regmap: Add support for polling on a register   Faiz Abbas
    • [U-Boot] [PATCH v3 05/13] regmap: Add support for polling on a register   Faiz Abbas
  • [U-Boot] [PATCH v3 06/13] mmc: sdhci: Add support for sdhci-caps-mask   Faiz Abbas
  • [U-Boot] [PATCH v3 07/13] mmc: sdhci: Make sdhci_set_clock() non static   Faiz Abbas
  • [U-Boot] [PATCH v3 08/13] arm: dts: k3: Add phy specific properties to SD card node   Faiz Abbas
  • [U-Boot] [PATCH v3 09/13] mmc: sdhci: Make set_ios_post() return int   Faiz Abbas
    • [U-Boot] [PATCH v3 09/13] mmc: sdhci: Make set_ios_post() return int   Tom Rini
  • [U-Boot] [PATCH v3 10/13] mmc: am654_sdhci: Add Support for PHY   Faiz Abbas
  • [U-Boot] [PATCH v3 11/13] configs: am65x_evm: Enable CONFIG_REGMAP   Faiz Abbas
  • [U-Boot] [PATCH v3 12/13] mmc: sdhci: Add support for HOST_CONTROL2 and setting UHS timings   Faiz Abbas
  • [U-Boot] [PATCH v3 13/13] mmc: am654_sdhci: Add a platform specific set_control_reg() callback   Faiz Abbas
• [U-Boot] [PATCH] mc : Add support to run MC in 128 MB DDR size   Meenakshi Aggarwal
  • [U-Boot] [PATCH] mc : Add support to run MC in 128 MB DDR size   Ashish Kumar
    • [U-Boot] [PATCH] mc : Add support to run MC in 128 MB DDR size   Meenakshi Aggarwal
    • [U-Boot] [PATCH] mc : Add support to run MC in 128 MB DDR size   Meenakshi Aggarwal
      • [U-Boot] [PATCH v1] mc : Add support to run MC in 128 MB DDR size   Meenakshi Aggarwal
      • [U-Boot] [PATCH v1] mc : Add support to run MC in 128 MB DDR size   Ashish Kumar
      • [U-Boot] [PATCH v1] mc : Add support to run MC in 128 MB DDR size   Meenakshi Aggarwal
  • [U-Boot] [PATCH 1/2] cmd: efidebug: add memmap command   Meenakshi Aggarwal
    • [U-Boot] [PATCH 1/2] cmd: efidebug: add memmap command   Meenakshi Aggarwal
    • [U-Boot] [PATCH 2/2] mc : Reduce MC memory size to 128M   Meenakshi Aggarwal
• [U-Boot] [RFC] efi_loader: EFI variables   Alexander Graf
  • [U-Boot] [RFC] efi_loader: EFI variables   Heinrich Schuchardt
    • [U-Boot] [RFC] efi_loader: EFI variables   Alexander Graf
      • [U-Boot] [RFC] efi_loader: EFI variables   Sumit Garg
    • [U-Boot] [RFC] efi_loader: EFI variables   Daniel Thompson
      • [U-Boot] [RFC] efi_loader: EFI variables   Sumit Garg
• [U-Boot] [PATCH v2 0/4] sunxi: SPI: Add SUN6I generation SPI support   Andre Przywara
  • [U-Boot] [PATCH v2 1/4] spi: sunxi: Enable and disable SPI clock on bus claim/release   Andre Przywara
  • [U-Boot] [PATCH v2 2/4] clk: sunxi: Implement SPI gates clocks and reset   Andre Przywara
  • [U-Boot] [PATCH v2 3/4] spi: sunxi: Add CLK support to Allwinner SPI driver   Andre Przywara
  • [U-Boot] [PATCH v2 4/4] spi: sunxi: Support newer SoCs   Andre Przywara
  • [U-Boot] [linux-sunxi] [PATCH v2 0/4] sunxi: SPI: Add SUN6I generation SPI support   Jagan Teki
    • [U-Boot] [linux-sunxi] [PATCH v2 0/4] sunxi: SPI: Add SUN6I generation SPI support   Andre Przywara
• [U-Boot] [PATCH v4 0/3] stm32mp1: add trusted boot with TF-A   Patrick Delaunay
  • [U-Boot] [PATCH v4 1/3] stm32mp1: add trusted boot with TF-A   Patrick Delaunay
  • [U-Boot] [PATCH v4 2/3] stm32mp1: bsec: access with SMC for trusted boot   Patrick Delaunay
  • [U-Boot] [PATCH v4 3/3] stm32mp1: display board information   Patrick Delaunay
• [U-Boot] [PATCH] Fix : Uboot crash when booting from SD.   Meenakshi Aggarwal
  • [U-Boot] [PATCH] Fix : Uboot crash when booting from SD.   Prabhakar Kushwaha
• [U-Boot] [PATCH] pinctrl: rockchip: Add 32bit writing function for rk3288 gpio0 pinctrl   David Wu
  • [U-Boot] [PATCH] pinctrl: rockchip: Add 32bit writing function for rk3288 gpio0 pinctrl   Philipp Tomsich
• [U-Boot] [PATCH] Convert CONFIG_IP_DEFRAG to Kconfig   Christian Gmeiner
• [U-Boot] [PATCH] fpga: Add support for getting external data address and length   tien.fong.chee at intel.com
  • [U-Boot] [PATCH] fpga: Add support for getting external data address and length   Michal Simek
• [U-Boot] [PATCH] cmd: ximg.c: Add support for getting external data address and length   tien.fong.chee at intel.com
• [U-Boot] [PATCH 1/1] test: let use gdbserver for all sandbox targets   Igor Opaniuk
  • [U-Boot] [PATCH 1/1] test: let use gdbserver for all sandbox targets   Tom Rini
  • [U-Boot] [PATCH 1/1] test: let use gdbserver for all sandbox targets   Simon Glass
  • [U-Boot] [U-Boot, 1/1] test: let use gdbserver for all sandbox targets   Tom Rini
• [U-Boot] [PATCH] usb: host: Print device name when scanning   Ismael Luceno Cortes
  • [U-Boot] [PATCH] usb: host: Print device name when scanning   Ismael Luceno Cortes
• [U-Boot] [PATCH 00/40] x86: Add support for booting from TPL   Simon Glass
  • [U-Boot] [PATCH 00/40] x86: Add support for booting from TPL   Bin Meng
• [U-Boot] [PATCH 0/4] Add STM32MP1 Discovery boards   Patrice Chotard
  • [U-Boot] [PATCH 1/4] ARM: dts: stm32: Synchronize DT with kernel one   Patrice Chotard
  • [U-Boot] [PATCH 4/4] ARM: dts: stm32mp1: Add adc nodes   Patrice Chotard
• [U-Boot] [PATCH 2/4] board: stm32mp1: Update README file   Patrice Chotard
• [U-Boot] [PATCH 3/4] Board: stm32mp1: Add supply current boot information   Patrice Chotard
• [U-Boot] [PATCH] ARM: tegra: Reserve 32MB for the Linux kernel   Jon Hunter
  • [U-Boot] [PATCH] ARM: tegra: Reserve 32MB for the Linux kernel   Stephen Warren
• [U-Boot] [RFC PATCH 1/3] sunxi: Use clrsetbits_le32 instead of multiple instruction   Michael Trimarchi
  • [U-Boot] [RFC PATCH 2/3] sunxi: Don't change the rank in dram size detection in A33   Michael Trimarchi
    • [U-Boot] [RFC PATCH 2/3] sunxi: Don't change the rank in dram size detection in A33   Maxime Ripard
      • [U-Boot] [RFC PATCH 2/3] sunxi: Don't change the rank in dram size detection in A33   Michael Nazzareno Trimarchi
      • [U-Boot] [RFC PATCH 2/3] sunxi: Don't change the rank in dram size detection in A33   Michael Nazzareno Trimarchi
  • [U-Boot] [RFC PATCH 3/3] sunxi: Fix A33 memory initialization   Michael Trimarchi
    • [U-Boot] [RFC PATCH 3/3] sunxi: Fix A33 memory initialization   Maxime Ripard
      • [U-Boot] [RFC PATCH 3/3] sunxi: Fix A33 memory initialization   Michael Nazzareno Trimarchi
      • [U-Boot] [RFC PATCH 3/3] sunxi: Fix A33 memory initialization   Maxime Ripard
• [U-Boot] [PATCH 1/5] drivers: usb: musb: Fail if the ctrl mod register is missing   Adrian Ratiu
  • [U-Boot] [PATCH 3/5] spl: Add ability to disable SPL FAT   Adrian Ratiu
  • [U-Boot] [PATCH 4/5] spl: Add common usb support in spl if needed   Adrian Ratiu
  • [U-Boot] [PATCH 5/5] cmd: pxe: Increase MAX_TFTP_PATH_LEN to 256   Adrian Ratiu
• [U-Boot] [PATCH 2/5] drivers: usb: musb: Fix comparison between pointer and integer warn   Adrian Ratiu
• [U-Boot] [PATCH v1] dm: pinctrl: Remove obsolete function pinctrl_decode_pin_config_dm().   Christoph Muellner
  • [U-Boot] [PATCH v1] dm: pinctrl: Remove obsolete function pinctrl_decode_pin_config_dm().   Simon Glass
• [U-Boot] [PATCH v3 1/1] efi_selftest: LoadImage from file device path   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_selftest: fix memory allocation in HII tests   Heinrich Schuchardt
  • [U-Boot] [PATCH 1/1] efi_selftest: fix memory allocation in HII tests   Alexander Graf
• [U-Boot] [PATCH 1/1] efi_selftest: do not use efi_free_pool()   Heinrich Schuchardt
  • [U-Boot] [PATCH 1/1] efi_selftest: do not use efi_free_pool()   Alexander Graf
• [U-Boot] [PATCH v2] of-platdata: improve documentation   Adam Ford
• [U-Boot] [U-Boot, 1/1] test/py: use default load address for tftp   Tom Rini
• [U-Boot] [PULL] efi patch queue 2019-02-13   Alexander Graf
  • [U-Boot] [PULL] efi patch queue 2019-02-13   Tom Rini
• [U-Boot] [PATCH] hikey: Allow environment to store in eMMC and increase bootdelay   Manivannan Sadhasivam
  • [U-Boot] [PATCH] hikey: Allow environment to store in eMMC and increase bootdelay   Tom Rini
    • [U-Boot] [PATCH] hikey: Allow environment to store in eMMC and increase bootdelay   Neil Williams
    • [U-Boot] [PATCH] hikey: Allow environment to store in eMMC and increase bootdelay   Tom Rini
      • [U-Boot] [PATCH] hikey: Allow environment to store in eMMC and increase bootdelay   Neil Williams
      • [U-Boot] [PATCH] hikey: Allow environment to store in eMMC and increase bootdelay   Tom Rini
  • [U-Boot] hikey: Allow environment to store in eMMC and increase bootdelay   Tom Rini
• [U-Boot] [PATCH] net:phy:aquantia Set only autoneg on in register 4.c441   Valentin-catalin Neacsu
• [U-Boot] [PATCH 01/33] log: Add a Kconfig option to set the default log level   Bin Meng
• [U-Boot] [PATCH 02/33] log: Add documentation for convenience functions   Bin Meng
• [U-Boot] [PATCH 03/33] log: Allow #define LOG_DEBUG to enable logging in a file   Bin Meng
  • [U-Boot] [PATCH 03/33] log: Allow #define LOG_DEBUG to enable logging in a file   Simon Glass
• [U-Boot] [PATCH 04/33] dm: syscon: Don't require a regmap for PCI devices   Bin Meng
• [U-Boot] [PATCH 05/33] i2c: designware: Add error checking on init   Bin Meng
• [U-Boot] [PATCH 06/33] pci: Don't export pci_hose_config_device()   Bin Meng
• [U-Boot] [PATCH 07/33] pci: Fix comment in struct pci_child_platdata   Bin Meng
• [U-Boot] [PATCH 08/33] gpio: Show inactive GPIOs when explicitly requested   Bin Meng
• [U-Boot] [PATCH 09/33] gpio: Use case-insentive matching on the GPIO name   Bin Meng
• [U-Boot] [PATCH 10/33] pci: Add IDs for Intel high-definition audio   Bin Meng
• [U-Boot] [PATCH 11/33] sandbox: Add a note about the growing state_info struct   Bin Meng
• [U-Boot] [PATCH 12/33] x86: Adjust I/O macros to work on 64-bit machines   Bin Meng
• [U-Boot] [PATCH 13/33] x86: samus: Increase the pre-reloc memory   Bin Meng
• [U-Boot] [PATCH 14/33] x86: link: Increase malloc size and decrease code size   Bin Meng
• [U-Boot] [PATCH 15/33] x86: sandbox: pch: Add a CONFIG option for PCH   Bin Meng
  • [U-Boot] [PATCH 15/33] x86: sandbox: pch: Add a CONFIG option for PCH   Jean-Jacques Hiblot
• [U-Boot] [PATCH 16/33] sandbox: pch: Add a test for the PCH uclass   Bin Meng
• [U-Boot] [PATCH 17/33] pch: Add ioctl support   Bin Meng
• [U-Boot] [PATCH 18/33] x86: ivybridge: Add a way to get the HDA config setting   Bin Meng
• [U-Boot] [PATCH 19/33] sound: Mark sound_setup() as optional   Bin Meng
• [U-Boot] [PATCH 20/33] sound: Add uclass operations for beeping   Bin Meng
• [U-Boot] [PATCH 21/33] sound: Add support for Intel HDA   Bin Meng
• [U-Boot] [PATCH 22/33] sandbox: sound: Silence sound for testing   Bin Meng
  • [U-Boot] [PATCH 22/33] sandbox: sound: Silence sound for testing   Simon Glass
• [U-Boot] [PATCH 23/33] sound: x86: link: Add sound support   Bin Meng
  • [U-Boot] [PATCH 23/33] sound: x86: link: Add sound support   Simon Glass
• [U-Boot] [PATCH 24/33] sound: x86: Add beeping support in i8254   Bin Meng
• [U-Boot] [PATCH 25/33] sound: Add a driver for the i8254 beep   Bin Meng
• [U-Boot] [PATCH 26/33] x86: coreboot: Enable the beeper sound driver   Bin Meng
• [U-Boot] [PATCH 27/33] x86: broadwell: Add support for the ADSP   Bin Meng
• [U-Boot] [PATCH 28/33] x86: broadwell: Don't bother probing the PCH for pinctrl   Bin Meng
• [U-Boot] [PATCH 29/33] x86: broadwell: Add support for serial I/O devices   Bin Meng
• [U-Boot] [PATCH 30/33] x86: sound: Add support for broadwell I2S   Bin Meng
• [U-Boot] [PATCH 31/33] sound: Add a driver for RealTek RT5677   Bin Meng
• [U-Boot] [PATCH 32/33] x86: sound: Add sound support for samus (broadwell)   Bin Meng
  • [U-Boot] [PATCH 32/33] x86: sound: Add sound support for samus (broadwell)   Simon Glass
• [U-Boot] [PATCH 33/33] x86: Add sound support for samus   Bin Meng
  • [U-Boot] [PATCH 33/33] x86: Add sound support for samus   Simon Glass
• [U-Boot] [PATCH 0/4] Update stm32_sdmmc2 driver and DT bindings   Patrice Chotard
  • [U-Boot] [PATCH 1/4] ARM: dts: stm32: Update sdmmc binding for stm32h743i-eval   Patrice Chotard
  • [U-Boot] [PATCH 2/4] ARM: dts: stm32: Update sdmmc binding for stm32mp157c-ed1   Patrice Chotard
  • [U-Boot] [PATCH 3/4] mmc: stm32_sdmmc2: Update DT properties with v4.19 bindings   Patrice Chotard
    • [U-Boot] [PATCH 3/4] mmc: stm32_sdmmc2: Update DT properties with v4.19 bindings   Patrice CHOTARD
  • [U-Boot] [PATCH 4/4] mmc: stm32_sdmmc2: Fix r1b timeout issue   Patrice Chotard
• [U-Boot] [PATCH v5 0/7] Add support for symlink creation in EXT4   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v5 2/7] test: fs: disable the metadata checksums on ext4 filesystems   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v5 3/7] test: fs: Add filesystem integrity checks   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v5 4/7] fs: ext4: constify the buffer passed to write functions   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v5 5/7] fs: ext4: Add support for the creation of symbolic links   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v5 6/7] fs: Add a new command to create symbolic links   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v5 7/7] test: fs: Added tests for symlinks   Jean-Jacques Hiblot
  • [U-Boot] [PATCH v5 0/7] Add support for symlink creation in EXT4   Jean-Jacques Hiblot
• [U-Boot] [PATCH v5 1/7] fs: ext4: do not allow writes if metadata checksum is active   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 0/4] Update stm32_sdmmc2 driver and DT bindings   Patrice Chotard
  • [U-Boot] [PATCH v2 2/4] ARM: dts: stm32: Update sdmmc binding for stm32mp157c-ed1   Patrice Chotard
  • [U-Boot] [PATCH v2 4/4] mmc: stm32_sdmmc2: Fix r1b timeout issue   Patrice Chotard
• [U-Boot] [PATCH v2 1/4] ARM: dts: stm32: Update sdmmc binding for stm32h743i-eval   Patrice Chotard
• [U-Boot] [PATCH v2 3/4] mmc: stm32_sdmmc2: Update DT properties with v4.19 bindings   Patrice Chotard
• [U-Boot] [RESEND PATCH v5 0/7] Add support for symlink creation in EXT4   Jean-Jacques Hiblot
  • [U-Boot] [RESEND PATCH v5 4/7] fs: ext4: constify the buffer passed to write functions   Jean-Jacques Hiblot
  • [U-Boot] [RESEND PATCH v5 6/7] fs: Add a new command to create symbolic links   Jean-Jacques Hiblot
  • [U-Boot] [RESEND PATCH v5 7/7] test: fs: Added tests for symlinks   Jean-Jacques Hiblot
• [U-Boot] [RESEND PATCH v5 1/7] fs: ext4: do not allow writes if metadata checksum is active   Jean-Jacques Hiblot
• [U-Boot] [RESEND PATCH v5 2/7] test: fs: disable the metadata checksums on ext4 filesystems   Jean-Jacques Hiblot
• [U-Boot] [RESEND PATCH v5 3/7] test: fs: Add filesystem integrity checks   Jean-Jacques Hiblot
  • [U-Boot] [RESEND PATCH v5 3/7] test: fs: Add filesystem integrity checks   Tom Rini
• [U-Boot] [RESEND PATCH v5 5/7] fs: ext4: Add support for the creation of symbolic links   Jean-Jacques Hiblot
• [U-Boot] [PATCH] fit: Add support for printing more than one FPGA node name   tien.fong.chee at intel.com
• [U-Boot] [PATCH 1/3] arm64: zynqmp: Fix logic around CONFIG_ZYNQ_SDHCI   Michal Simek
  • [U-Boot] [PATCH 2/3] arm64: zynqmp: Remove SPD related configurations   Michal Simek
  • [U-Boot] [PATCH 3/3] arm64: zynqmp: Remove board config files   Michal Simek
• [U-Boot] [PATCH v8 0/8] Add support for loading FPGA bitstream   tien.fong.chee at intel.com
  • [U-Boot] [PATCH v8 1/8] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   tien.fong.chee at intel.com
    • [U-Boot] [PATCH v8 1/8] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Marek Vasut
      • [U-Boot] [PATCH v8 1/8] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Chee, Tien Fong
      • [U-Boot] [PATCH v8 1/8] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Marek Vasut
      • [U-Boot] [PATCH v8 1/8] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Chee, Tien Fong
  • [U-Boot] [PATCH v8 2/8] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   tien.fong.chee at intel.com
    • [U-Boot] [PATCH v8 2/8] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   Marek Vasut
      • [U-Boot] [PATCH v8 2/8] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   Dalon L Westergreen
      • [U-Boot] [PATCH v8 2/8] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   Marek Vasut
      • [U-Boot] [PATCH v8 2/8] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   Chee, Tien Fong
      • [U-Boot] [PATCH v8 2/8] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   Marek Vasut
      • [U-Boot] [PATCH v8 2/8] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   Chee, Tien Fong
      • [U-Boot] [PATCH v8 2/8] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   Marek Vasut
      • [U-Boot] [PATCH v8 2/8] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   Chee, Tien Fong
      • [U-Boot] [PATCH v8 2/8] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   Marek Vasut
      • [U-Boot] [PATCH v8 2/8] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   Chee, Tien Fong
      • [U-Boot] [PATCH v8 2/8] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   Marek Vasut
      • [U-Boot] [PATCH v8 2/8] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   Chee, Tien Fong
      • [U-Boot] [PATCH v8 2/8] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   Chee, Tien Fong
  • [U-Boot] [PATCH v8 3/8] fit: Add function declarations to the header file   tien.fong.chee at intel.com
    • [U-Boot] [PATCH v8 3/8] fit: Add function declarations to the header file   Marek Vasut
      • [U-Boot] [PATCH v8 3/8] fit: Add function declarations to the header file   Chee, Tien Fong
      • [U-Boot] [PATCH v8 3/8] fit: Add function declarations to the header file   Chee, Tien Fong
      • [U-Boot] [PATCH v8 3/8] fit: Add function declarations to the header file   Marek Vasut
      • [U-Boot] [PATCH v8 3/8] fit: Add function declarations to the header file   Chee, Tien Fong
  • [U-Boot] [PATCH v8 4/8] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   tien.fong.chee at intel.com
    • [U-Boot] [PATCH v8 4/8] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   Marek Vasut
      • [U-Boot] [PATCH v8 4/8] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   Chee, Tien Fong
      • [U-Boot] [PATCH v8 4/8] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   Marek Vasut
      • [U-Boot] [PATCH v8 4/8] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   Chee, Tien Fong
      • [U-Boot] [PATCH v8 4/8] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   Chee, Tien Fong
      • [U-Boot] [PATCH v8 4/8] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   Marek Vasut
      • [U-Boot] [PATCH v8 4/8] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   Chee, Tien Fong
      • [U-Boot] [PATCH v8 4/8] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   Marek Vasut
      • [U-Boot] [PATCH v8 4/8] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   Chee, Tien Fong
      • [U-Boot] [PATCH v8 4/8] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   Marek Vasut
  • [U-Boot] [PATCH v8 5/8] ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK   tien.fong.chee at intel.com
  • [U-Boot] [PATCH v8 6/8] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs   tien.fong.chee at intel.com
    • [U-Boot] [PATCH v8 6/8] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs   Marek Vasut
      • [U-Boot] [PATCH v8 6/8] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs   Chee, Tien Fong
      • [U-Boot] [PATCH v8 6/8] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs   Marek Vasut
      • [U-Boot] [PATCH v8 6/8] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs   Chee, Tien Fong
      • [U-Boot] [PATCH v8 6/8] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs   Marek Vasut
      • [U-Boot] [PATCH v8 6/8] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs   Chee, Tien Fong
      • [U-Boot] [PATCH v8 6/8] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs   Marek Vasut
      • [U-Boot] [PATCH v8 6/8] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs   Chee, Tien Fong
      • [U-Boot] [PATCH v8 6/8] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs   Marek Vasut
      • [U-Boot] [PATCH v8 6/8] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs   Chee, Tien Fong
      • [U-Boot] [PATCH v8 6/8] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs   Westergreen, Dalon
      • [U-Boot] [PATCH v8 6/8] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs   Chee, Tien Fong
      • [U-Boot] [PATCH v8 6/8] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs   Westergreen, Dalon
      • [U-Boot] [PATCH v8 6/8] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs   Chee, Tien Fong
  • [U-Boot] [PATCH v8 7/8] ARM: socfpga: Synchronize the configuration for A10 SoCDK   tien.fong.chee at intel.com
  • [U-Boot] [PATCH v8 8/8] ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL   tien.fong.chee at intel.com
• [U-Boot] [PATCH 2/3] sunxi: Rename Sinovoip BPI M2 Plus to Bananapi M2 Plus H3   Jagan Teki
  • [U-Boot] [PATCH 2/3] sunxi: Rename Sinovoip BPI M2 Plus to Bananapi M2 Plus H3   Tom Rini
    • [U-Boot] [PATCH 2/3] sunxi: Rename Sinovoip BPI M2 Plus to Bananapi M2 Plus H3   Chen-Yu Tsai
• [U-Boot] [PATCH 0/9] xilinx: dts: Update various DT files   Michal Simek
  • [U-Boot] [PATCH 1/9] ARM: dts: Use mmc@ instead sdhci@   Michal Simek
  • [U-Boot] [PATCH 2/9] ARM: dts: zynq: Set correct manufacturer for ZedBoard and MicroZed boards   Michal Simek
  • [U-Boot] [PATCH 3/9] ARM: dts: zynq: correct and improve the model property of dt files   Michal Simek
  • [U-Boot] [PATCH 4/9] arm64: zynqmp: Add reset-on-timeout for all boards and modify default timeout value   Michal Simek
  • [U-Boot] [PATCH 5/9] xilinx: dts: Remove additional empty lines   Michal Simek
  • [U-Boot] [PATCH 6/9] arm64: dts: Fix various entry-method properties to reflect documentation   Michal Simek
  • [U-Boot] [PATCH 7/9] arm64: zynqmp: Remove autodetected devices without description   Michal Simek
  • [U-Boot] [PATCH 8/9] arm64: zynqmp: Fix i2c boot warning   Michal Simek
  • [U-Boot] [PATCH 9/9] arm64: zynqmp: Change the spi-rx-bus-width property to x1   Michal Simek
• [U-Boot] [PATCH v2 0/9] arm: exynos: Fix reboot on Odroid HC1   Krzysztof Kozlowski
  • [U-Boot] [PATCH v2 1/9] adc: exynos-adc: Fix wrong bit operation used to stop the ADC   Krzysztof Kozlowski
    • [U-Boot] [PATCH v2 1/9] adc: exynos-adc: Fix wrong bit operation used to stop the ADC   Lukasz Majewski
  • [U-Boot] [PATCH v2 2/9] power: regulator: s2mps11: Fix step for LDO27 and LDO35   Krzysztof Kozlowski
    • [U-Boot] [PATCH v2 2/9] power: regulator: s2mps11: Fix step for LDO27 and LDO35   Lukasz Majewski
  • [U-Boot] [PATCH v2 3/9] arm: exynos: Detect revision later, when all resources are ready   Krzysztof Kozlowski
  • [U-Boot] [PATCH v2 4/9] arm: exynos: odroid-xu3: Display info late to have proper type   Krzysztof Kozlowski
    • [U-Boot] [PATCH v2 4/9] arm: exynos: odroid-xu3: Display info late to have proper type   Krzysztof Kozlowski
  • [U-Boot] [PATCH v2 5/9] arm: exynos: Wait till ADC stabilizes before checking Odroid HC1 revision   Krzysztof Kozlowski
    • [U-Boot] [PATCH v2 5/9] arm: exynos: Wait till ADC stabilizes before checking Odroid HC1 revision   Lukasz Majewski
      • [U-Boot] [PATCH v2 5/9] arm: exynos: Wait till ADC stabilizes before checking Odroid HC1 revision   Krzysztof Kozlowski
      • [U-Boot] [PATCH v2 5/9] arm: exynos: Wait till ADC stabilizes before checking Odroid HC1 revision   Krzysztof Kozlowski
      • [U-Boot] [PATCH v2 5/9] arm: exynos: Wait till ADC stabilizes before checking Odroid HC1 revision   Lukasz Majewski
  • [U-Boot] [PATCH v2 6/9] regulator: Add support for ramp delay   Krzysztof Kozlowski
  • [U-Boot] [PATCH v2 7/9] power: regulator: s2mps11: Add enable delay   Krzysztof Kozlowski
    • [U-Boot] [PATCH v2 7/9] power: regulator: s2mps11: Add enable delay   Lukasz Majewski
      • [U-Boot] [PATCH v2 7/9] power: regulator: s2mps11: Add enable delay   Krzysztof Kozlowski
      • [U-Boot] [PATCH v2 7/9] power: regulator: s2mps11: Add enable delay   Lukasz Majewski
    • [U-Boot] [PATCH v2 7/9] power: regulator: s2mps11: Add enable delay   Simon Glass
      • [U-Boot] [PATCH v2 7/9] power: regulator: s2mps11: Add enable delay   Krzysztof Kozlowski
  • [U-Boot] [PATCH v2 8/9] arm: dts: exynos: Add supply for ADC block to Odroid XU3 family   Krzysztof Kozlowski
    • [U-Boot] [PATCH v2 8/9] arm: dts: exynos: Add supply for ADC block to Odroid XU3 family   Lukasz Majewski
  • [U-Boot] [PATCH v2 9/9] arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid XU3 family   Krzysztof Kozlowski
• [U-Boot] mx6cuboxi: Detecting wrong .dtb (v2019.01)   Vagrant Cascadian
  • [U-Boot] mx6cuboxi: Detecting wrong .dtb (v2019.01)   Fabio Estevam
    • [U-Boot] mx6cuboxi: Detecting wrong .dtb (v2019.01)   Baruch Siach
      • [U-Boot] mx6cuboxi: Detecting wrong .dtb (v2019.01)   Vagrant Cascadian
      • [U-Boot] mx6cuboxi: Detecting wrong .dtb (v2019.01)   Baruch Siach
      • [U-Boot] mx6cuboxi: Detecting wrong .dtb (v2019.01)   Vagrant Cascadian
• [U-Boot] SPL_FIT_SIGNATURE on am3358   Douglas Zobel
• [U-Boot] [PATCH v2] sunxi: Fix build when CONFIG_CMD_PXE or CONFIG_CMD_DHCP are disabled   megous at megous.com
• [U-Boot] [PATCH v2] lib: decode_timing_property should return -NOENT when proprty is not found   megous at megous.com
  • [U-Boot] [PATCH v2] lib: decode_timing_property should return -NOENT when proprty is not found   Simon Glass
• [U-Boot] [PATCH v2] power: axp818: Fix typo in axp_set_dldo   megous at megous.com
• [U-Boot] [PATCH 0/7] AM65x HS device support   Andrew F. Davis
  • [U-Boot] [PATCH 1/7] arm: K3: Avoid use of MCU_PSRAM0 before SYSFW is loaded   Andrew F. Davis
    • [U-Boot] [PATCH 1/7] arm: K3: Avoid use of MCU_PSRAM0 before SYSFW is loaded   Tom Rini
      • [U-Boot] [PATCH 1/7] arm: K3: Avoid use of MCU_PSRAM0 before SYSFW is loaded   Andrew F. Davis
    • [U-Boot] [PATCH 1/7] arm: K3: Avoid use of MCU_PSRAM0 before SYSFW is loaded   Lokesh Vutla
      • [U-Boot] [PATCH 1/7] arm: K3: Avoid use of MCU_PSRAM0 before SYSFW is loaded   Andrew F. Davis
      • [U-Boot] [PATCH 1/7] arm: K3: Avoid use of MCU_PSRAM0 before SYSFW is loaded   Lokesh Vutla
  • [U-Boot] [PATCH 2/7] firmware: ti_sci: Add support for firewall management   Andrew F. Davis
    • [U-Boot] [PATCH 2/7] firmware: ti_sci: Add support for firewall management   Tom Rini
    • [U-Boot] [PATCH 2/7] firmware: ti_sci: Add support for firewall management   Lokesh Vutla
  • [U-Boot] [PATCH 3/7] firmware: ti_sci: Modify auth_boot TI-SCI API to match new version   Andrew F. Davis
    • [U-Boot] [PATCH 3/7] firmware: ti_sci: Modify auth_boot TI-SCI API to match new version   Tom Rini
  • [U-Boot] [PATCH 4/7] arm: mach-k3: Add secure device support   Andrew F. Davis
    • [U-Boot] [PATCH 4/7] arm: mach-k3: Add secure device support   Tom Rini
  • [U-Boot] [PATCH 5/7] arm: mach-k3: Add secure device build support   Andrew F. Davis
    • [U-Boot] [PATCH 5/7] arm: mach-k3: Add secure device build support   Tom Rini
      • [U-Boot] [PATCH 5/7] arm: mach-k3: Add secure device build support   Andrew F. Davis
    • [U-Boot] [PATCH 5/7] arm: mach-k3: Add secure device build support   Lokesh Vutla
      • [U-Boot] [PATCH 5/7] arm: mach-k3: Add secure device build support   Andrew F. Davis
      • [U-Boot] [PATCH 5/7] arm: mach-k3: Add secure device build support   Lokesh Vutla
      • [U-Boot] [PATCH 5/7] arm: mach-k3: Add secure device build support   Tom Rini
      • [U-Boot] [PATCH 5/7] arm: mach-k3: Add secure device build support   Andrew F. Davis
  • [U-Boot] [PATCH 6/7] configs: Add a config for AM65x High Security EVM   Andrew F. Davis
    • [U-Boot] [PATCH 6/7] configs: Add a config for AM65x High Security EVM   Tom Rini
  • [U-Boot] [PATCH 7/7] doc: Update info on using K3 secure devices   Andrew F. Davis
    • [U-Boot] [PATCH 7/7] doc: Update info on using K3 secure devices   Tom Rini
  • [U-Boot] [PATCH 0/7] AM65x HS device support   Andreas Dannenberg
• [U-Boot] [PATCH 1/2] mtd: ubi debug: Remove the pid print from ubi_assert   Eran Matityahu
  • [U-Boot] [PATCH 1/2] mtd: ubi debug: Remove the pid print from ubi_assert   Heiko Schocher
    • [U-Boot] [PATCH 1/2] mtd: ubi debug: Remove the pid print from ubi_assert   Eran Matityahu
      • [U-Boot] [PATCH 1/2] mtd: ubi debug: Remove the pid print from ubi_assert   Heiko Schocher
• [U-Boot] [PATCH 2/2] mtd: ubi, ubifs debug: Use pr_debug instead of pr_crit   Eran Matityahu
• [U-Boot] [PATCH] ARM: da850evm: Increase Malloc Size   Adam Ford
  • [U-Boot] ARM: da850evm: Increase Malloc Size   Tom Rini
• [U-Boot] [RFC 1/1] configs: rk3288: SPL file must fit into 32 KiB   Heinrich Schuchardt
  • [U-Boot] [RFC 1/1] configs: rk3288: SPL file must fit into 32 KiB   Philipp Tomsich
  • [U-Boot] [RFC 1/1] configs: rk3288: SPL file must fit into 32 KiB   Simon Goldschmidt
    • [U-Boot] [RFC 1/1] configs: rk3288: SPL file must fit into 32 KiB   Philipp Tomsich
      • [U-Boot] [RFC 1/1] configs: rk3288: SPL file must fit into 32 KiB   Simon Goldschmidt
  • [U-Boot] [RFC 1/1] configs: rk3288: SPL file must fit into 32 KiB   Tom Rini
    • [U-Boot] [RFC 1/1] configs: rk3288: SPL file must fit into 32 KiB   Philipp Tomsich
      • [U-Boot] [RFC 1/1] configs: rk3288: SPL file must fit into 32 KiB   Heinrich Schuchardt
      • [U-Boot] [RFC 1/1] configs: rk3288: SPL file must fit into 32 KiB   Tom Rini
• [U-Boot] [PATCH v2 1/1] configs: rk3288: Tinker Board SPL file must fit into 32 KiB   Heinrich Schuchardt
  • [U-Boot] [PATCH v2 1/1] configs: rk3288: Tinker Board SPL file must fit into 32 KiB   Simon Goldschmidt
  • [U-Boot] [PATCH v2 1/1] configs: rk3288: Tinker Board SPL file must fit into 32 KiB   Philipp Tomsich
  • [U-Boot] [PATCH v2 1/1] configs: rk3288: Tinker Board SPL file must fit into 32 KiB   Tom Rini
    • [U-Boot] [PATCH v2 1/1] configs: rk3288: Tinker Board SPL file must fit into 32 KiB   Heinrich Schuchardt
      • [U-Boot] [PATCH v2 1/1] configs: rk3288: Tinker Board SPL file must fit into 32 KiB   Tom Rini
• [U-Boot] [PATCH v4 00/22] imx: vybrid: Update BK4 and PCM052 boards to only use DM/DTS   Lukasz Majewski
  • [U-Boot] [PATCH v4 02/22] net: Kconfig: FEC: Add dependency on VF610   Lukasz Majewski
  • [U-Boot] [PATCH v4 03/22] vybrid: ddr: Extend vf610-pinfunc.h with DDR pads definitions   Lukasz Majewski
  • [U-Boot] [PATCH v4 04/22] vybrid: clock: Provide enable_i2c_clk() function for Vybrid   Lukasz Majewski
  • [U-Boot] [PATCH v4 05/22] pcm052: board: Do not enable I2C2 code in the board file   Lukasz Majewski
  • [U-Boot] [PATCH v4 06/22] vybrid: Define the imx_get_mac_from_fuse() as a __weak function   Lukasz Majewski
  • [U-Boot] [PATCH v4 07/22] pcm052: board: Remove "m4go" command as it is superseded by "bootaux"   Lukasz Majewski
  • [U-Boot] [PATCH v4 08/22] pcm052: board: vybrid: Update the board name for BK4 device   Lukasz Majewski
  • [U-Boot] [PATCH v4 09/22] ARM: DTS: vybrid: Update vf.dtsi file to descibe more vf610 hardware   Lukasz Majewski
  • [U-Boot] [PATCH v4 10/22] pcm052: board: cosmetic: Add copyright notice to pcm052.c   Lukasz Majewski
  • [U-Boot] [PATCH v4 11/22] ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052)   Lukasz Majewski
  • [U-Boot] [PATCH v4 12/22] ARM: DTS: Provide vf610-bk4r1-u-boot.dtsi for U-Boot specific properties   Lukasz Majewski
  • [U-Boot] [PATCH v4 13/22] defconfig: bk4/pcm052: Update bk4r1|pcm052_defconfig to support DM/DT   Lukasz Majewski
  • [U-Boot] [PATCH v4 14/22] config: pcm052: Use SZ_X{MK} from linux/sizes.h for include/configs/pcm052.h   Lukasz Majewski
  • [U-Boot] [PATCH v4 15/22] config: bk4: Update include/configs/bk4r1.h file   Lukasz Majewski
  • [U-Boot] [PATCH v4 16/22] pcm052: board: Remove in-board setup code (it is now replaced by DM setup)   Lukasz Majewski
  • [U-Boot] [PATCH v4 17/22] config: bk4: Update u-boot script to support recovery via SD card   Lukasz Majewski
  • [U-Boot] [PATCH v4 18/22] config: bk4: Update u-boot envs to support NOR memories initial setup   Lukasz Majewski
  • [U-Boot] [PATCH v4 19/22] pcm052: bk4: sdcard: Add support for SD card booting/recovery   Lukasz Majewski
  • [U-Boot] [PATCH v4 20/22] pcm052: board: Add code to setup LED default states   Lukasz Majewski
  • [U-Boot] [PATCH v4 21/22] pcm052: mac: Provide board specific imx_get_mac_from_fuse() function   Lukasz Majewski
  • [U-Boot] [PATCH v4 22/22] pcm052: bk4: Add board_phy_config() for BK4 to setup ksz8081 phy   Lukasz Majewski
• [U-Boot] [PATCH v4 01/22] net: FEC: Add compatible for vybrid (vf610) to reuse fec_mxc.c driver   Lukasz Majewski
• [U-Boot] [PATCH] lib/crc16: use non-C99 loop style   Thomas Petazzoni
  • [U-Boot] [PATCH] lib/crc16: use non-C99 loop style   Philipp Tomsich
  • [U-Boot] [PATCH] lib/crc16: use non-C99 loop style   Tom Rini
    • [U-Boot] [PATCH] lib/crc16: use non-C99 loop style   Philipp Tomsich
      • [U-Boot] [PATCH] lib/crc16: use non-C99 loop style   Thomas Petazzoni
      • [U-Boot] [PATCH] lib/crc16: use non-C99 loop style   Philipp Tomsich
      • [U-Boot] [PATCH] lib/crc16: use non-C99 loop style   Tom Rini
• [U-Boot] [PATCH] sunxi: update SATA driver to always use DM_SCSI   Andre Przywara
  • [U-Boot] [PATCH] sunxi: update SATA driver to always use DM_SCSI   Simon Glass
• [U-Boot] Changed syntax for dumpimage, failing tests   Vagrant Cascadian
  • [U-Boot] [PATCH] test: Update test-imagetools.sh to match new syntax   Martyn Welch
    • [U-Boot] [PATCH] test: Update test-imagetools.sh to match new syntax   Vagrant Cascadian
      • [U-Boot] [PATCH] test: Update test-imagetools.sh to match new syntax   Martyn Welch
• [U-Boot] env: Support multiple environments with varied size/offset/redund   Tim Harvey
• [U-Boot] [PATCH] preboot: Introduce CONFIG_USE_PREBOOT and migrate CONFIG_PREBOOT   Masahiro Yamada
  • [U-Boot] preboot: Introduce CONFIG_USE_PREBOOT and migrate CONFIG_PREBOOT   Tom Rini
• [U-Boot] [PATCH] zynq: fix I2C in SPL   Hannes Schmelzer
  • [U-Boot] [PATCH] zynq: fix I2C in SPL   Michal Simek
    • [U-Boot] Antwort: Re: [PATCH] zynq: fix I2C in SPL   Hannes Schmelzer
      • [U-Boot] Antwort: Re: [PATCH] zynq: fix I2C in SPL   Michal Simek
      • [U-Boot] Antwort: Re: [PATCH] zynq: fix I2C in SPL   Hannes Schmelzer
• [U-Boot] [PATCH v3 1/1] configs: rk3288: Tinker Board SPL file must fit into 32 KiB   Heinrich Schuchardt
  • [U-Boot] [PATCH v3 1/1] configs: rk3288: Tinker Board SPL file must fit into 32 KiB   Simon Goldschmidt
    • [U-Boot] [PATCH v3 1/1] configs: rk3288: Tinker Board SPL file must fit into 32 KiB   Simon Goldschmidt
      • [U-Boot] [PATCH v3 1/1] configs: rk3288: Tinker Board SPL file must fit into 32 KiB   Tom Rini
      • [U-Boot] [PATCH v3 1/1] configs: rk3288: Tinker Board SPL file must fit into 32 KiB   Simon Goldschmidt
      • [U-Boot] [PATCH v3 1/1] configs: rk3288: Tinker Board SPL file must fit into 32 KiB   Tom Rini
• [U-Boot] [PATCH v2] ARM: zynq: Add missing i2c get_rate for fixing i2c SPL   Hannes Schmelzer
  • [U-Boot] [PATCH v2] ARM: zynq: Add missing i2c get_rate for fixing i2c SPL   Heiko Schocher
• [U-Boot] [PATCH 0/2] efi_loader: rework loading (continued)   AKASHI Takahiro
  • [U-Boot] [PATCH 2/2] cmd: bootefi: rework do_bootefi()   AKASHI Takahiro
    • [U-Boot] [PATCH 2/2] cmd: bootefi: rework do_bootefi()   Heinrich Schuchardt
      • [U-Boot] [PATCH 2/2] cmd: bootefi: rework do_bootefi()   AKASHI Takahiro
• [U-Boot] [PATCH 1/2] cmd: bootefi: move bootefi_test_prepare() forward   AKASHI Takahiro
  • [U-Boot] [PATCH 1/2] cmd: bootefi: move bootefi_test_prepare() forward   Heinrich Schuchardt
• [U-Boot] U-Boot port for esp32   kbenvin
• [U-Boot] [PATCH 1/3] mmc: fsl_esdhc: add esdhc_imx flag   Y.b. Lu
  • [U-Boot] [PATCH 2/3] mmc: fsl_esdhc: clean up register definition   Y.b. Lu
    • [U-Boot] [PATCH 2/3] mmc: fsl_esdhc: clean up register definition   Peng Fan
  • [U-Boot] [PATCH 3/3] mmc: fsl_esdhc: clarify i.MX eSDHC specific functions   Y.b. Lu
    • [U-Boot] [PATCH 3/3] mmc: fsl_esdhc: clarify i.MX eSDHC specific functions   Peng Fan
  • [U-Boot] [PATCH 1/3] mmc: fsl_esdhc: add esdhc_imx flag   Peng Fan
    • [U-Boot] [PATCH 1/3] mmc: fsl_esdhc: add esdhc_imx flag   Y.b. Lu
• [U-Boot] [PATCH v2 0/8] spi: Add Allwinner A31 SPI driver   Jagan Teki
  • [U-Boot] [PATCH v2 1/8] spi: sun4i: Poll for rxfifo empty   Jagan Teki
    • [U-Boot] [PATCH v2 1/8] spi: sun4i: Poll for rxfifo empty   André Przywara
  • [U-Boot] [PATCH v2 2/8] clk: sunxi: Implement SPI clocks, resets   Jagan Teki
  • [U-Boot] [PATCH v2 3/8] spi: sun4i: Simplify reg writes using set/clrbits_le32   Jagan Teki
  • [U-Boot] [PATCH v2 4/8] spi: sun4i: Access registers and bits via enum offsets   Jagan Teki
    • [U-Boot] [PATCH v2 4/8] spi: sun4i: Access registers and bits via enum offsets   André Przywara
      • [U-Boot] [PATCH v2 4/8] spi: sun4i: Access registers and bits via enum offsets   Stefan Mavrodiev
      • [U-Boot] [PATCH v2 4/8] spi: sun4i: Access registers and bits via enum offsets   Jagan Teki
      • [U-Boot] [PATCH v2 4/8] spi: sun4i: Access registers and bits via enum offsets   Stefan Mavrodiev
      • [U-Boot] [PATCH v2 4/8] spi: sun4i: Access registers and bits via enum offsets   Jagan Teki
  • [U-Boot] [PATCH v2 5/8] spi: sun4i: Support fifo_depth via drvdata   Jagan Teki
  • [U-Boot] [PATCH v2 6/8] spi: sun4i: Add CLK support   Jagan Teki
    • [U-Boot] [PATCH v2 6/8] spi: sun4i: Add CLK support   André Przywara
  • [U-Boot] [PATCH v2 7/8] spi: sun4: Add A31 spi controller support   Jagan Teki
    • [U-Boot] [PATCH v2 7/8] spi: sun4: Add A31 spi controller support   André Przywara
      • [U-Boot] [PATCH v2 7/8] spi: sun4: Add A31 spi controller support   Jagan Teki
  • [U-Boot] [PATCH v2 8/8] spi: sun4i: Driver cleanup   Jagan Teki
    • [U-Boot] [PATCH v2 8/8] spi: sun4i: Driver cleanup   André Przywara
      • [U-Boot] [PATCH v2 8/8] spi: sun4i: Driver cleanup   Jagan Teki
• [U-Boot] [PATCH 1/6] pico-imx6ul: Import dts files from kernel   Fabio Estevam
  • [U-Boot] [PATCH 2/6] pico-imx6ul: Select CONFIG_OF_CONTROL   Fabio Estevam
    • [U-Boot] [PATCH 2/6] pico-imx6ul: Select CONFIG_OF_CONTROL   Otavio Salvador
  • [U-Boot] [PATCH 3/6] pico-imx6ul: Convert to DM MMC   Fabio Estevam
    • [U-Boot] [PATCH 3/6] pico-imx6ul: Convert to DM MMC   Otavio Salvador
  • [U-Boot] [PATCH 4/6] pico-imx6ul: Convert to CONFIG_DM_GPIO   Fabio Estevam
    • [U-Boot] [PATCH 4/6] pico-imx6ul: Convert to CONFIG_DM_GPIO   Otavio Salvador
  • [U-Boot] [PATCH 5/6] pico-imx6ul: Convert to DM_PMIC   Fabio Estevam
    • [U-Boot] [PATCH 5/6] pico-imx6ul: Convert to DM_PMIC   Otavio Salvador
  • [U-Boot] [PATCH 6/6] pico-imx6ul: README: Adjust the binary name after DM conversion   Fabio Estevam
    • [U-Boot] [PATCH 6/6] pico-imx6ul: README: Adjust the binary name after DM conversion   Otavio Salvador
  • [U-Boot] [PATCH 1/6] pico-imx6ul: Import dts files from kernel   Otavio Salvador
• [U-Boot] [RFC 3/9] pico-pi-imx7d: defconfig Enable DM gpio pinctrl and pinctrl_imx7   Fabio Estevam
• [U-Boot] [RFC 4/9] arm: imx7d-pico-pi: Convert to DM MMC initialization   Fabio Estevam
  • [U-Boot] [RFC 4/9] arm: imx7d-pico-pi: Convert to DM MMC initialization   Offouga Joris
    • [U-Boot] [RFC 4/9] arm: imx7d-pico-pi: Convert to DM MMC initialization   Fabio Estevam
      • [U-Boot] [RFC 4/9] arm: imx7d-pico-pi: Convert to DM MMC initialization   Joris Offouga
      • [U-Boot] [RFC 4/9] arm: imx7d-pico-pi: Convert to DM MMC initialization   Fabio Estevam
      • [U-Boot] [RFC 4/9] arm: imx7d-pico-pi: Convert to DM MMC initialization   Joris Offouga
      • [U-Boot] [RFC 4/9] arm: imx7d-pico-pi: Convert to DM MMC initialization   Fabio Estevam
      • [U-Boot] [RFC 4/9] arm: imx7d-pico-pi: Convert to DM MMC initialization   Joris Offouga
• [U-Boot] [RFC 5/9] pico-pi-imx7d: defconfig: Switch to DM for I2C   Fabio Estevam
• [U-Boot] [RFC 6/9] pico-imx7d-pico: defconfig: Switch to DM for UART   Fabio Estevam
• [U-Boot] [PATCH] arm64: zynqmp: Create fdtfile from compatible string   Michal Simek
  • [U-Boot] [PATCH] arm64: zynqmp: Create fdtfile from compatible string   Alexander Graf
    • [U-Boot] [PATCH] arm64: zynqmp: Create fdtfile from compatible string   Michal Simek
      • [U-Boot] [PATCH] arm64: zynqmp: Create fdtfile from compatible string   Alexander Graf
      • [U-Boot] [PATCH] arm64: zynqmp: Create fdtfile from compatible string   Michal Simek
• [U-Boot] [RFC 7/9] pico-imx7d: Convert to DM PMIC   Fabio Estevam
• [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM   Fabio Estevam
  • [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM   Fabio Estevam
    • [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM   Lukasz Majewski
      • [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM   Offouga Joris
      • [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM   Fabio Estevam
      • [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM   Fabio Estevam
      • [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM   Joris Offouga
      • [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM   Fabio Estevam
      • [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM   Joris Offouga
      • [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM   Fabio Estevam
      • [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM   Joris Offouga
      • [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM   Fabio Estevam
      • [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM   Joris Offouga
      • [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM   Fabio Estevam
      • [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM   Joris Offouga
      • [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM   Fabio Estevam
      • [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM   Joris Offouga
      • [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM   Fabio Estevam
      • [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM   Offouga Joris
      • [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM   Fabio Estevam
      • [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM   Fabio Estevam
      • [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM   Offouga Joris
• [U-Boot] [PATCH] warp7: Remove unneeded headers after DM conversion   Fabio Estevam
• [U-Boot] [PATCH v5 1/1] avb: add support for named persistent values   Igor Opaniuk
• [U-Boot] [PATCH v2] arm64: zynqmp: Create fdtfile from compatible string   Michal Simek
  • [U-Boot] [PATCH v2] arm64: zynqmp: Create fdtfile from compatible string   Alexander Graf
• [U-Boot] [PATCH] mmc: Downgrade SD/MMC from UHS/HS200/HS400 modes before boot   Marek Vasut
• [U-Boot] [PATCH] warp7: Fix the write to the LDOGCTL PMIC register   Fabio Estevam
• [U-Boot] [PATCH 1/2] mx6ul_14x14_evk: Simplify the PMIC register writes   Fabio Estevam
• [U-Boot] [PATCH] efi_loader: Swap roles with Heinrich   Alexander Graf
  • [U-Boot] [PATCH] efi_loader: Swap roles with Heinrich   Heinrich Schuchardt
  • [U-Boot] [PATCH] efi_loader: Swap roles with Heinrich   Tom Rini
  • [U-Boot] efi_loader: Swap roles with Heinrich   Tom Rini
• [U-Boot] [PATCH v2] mx6ul_14x14_evk: Simplify the PMIC register writes   Fabio Estevam
  • [U-Boot] [PATCH v2] mx6ul_14x14_evk: Simplify the PMIC register writes   Peng Fan
• [U-Boot] [PATCH v2] warp7: Fix the write to the LDOGCTL PMIC register   Fabio Estevam
• [U-Boot] [PATCH] rpi: Make Matthias maintainer   Alexander Graf
  • [U-Boot] [PATCH] rpi: Make Matthias maintainer   Tom Rini
  • [U-Boot] rpi: Make Matthias maintainer   Tom Rini
• [U-Boot] [PATCH v2] rpi: add Compute Module 3+   Alexander Graf
• [U-Boot] [PATCH V2 1/3] sunxi: Use clrsetbits_le32 instead of multiple instruction   Michael Trimarchi
  • [U-Boot] [PATCH V2 2/3] sunxi: Don't change the rank in dram size detection in A33   Michael Trimarchi
  • [U-Boot] [PATCH V2 3/3] sunxi: Fix A33 memory initialization   Michael Trimarchi
    • [U-Boot] [PATCH V2 3/3] sunxi: Fix A33 memory initialization   Philipp Tomsich
      • [U-Boot] [PATCH V2 3/3] sunxi: Fix A33 memory initialization   Michael Nazzareno Trimarchi
      • [U-Boot] [PATCH V2 3/3] sunxi: Fix A33 memory initialization   André Przywara
      • [U-Boot] [PATCH V2 3/3] sunxi: Fix A33 memory initialization   Philipp Tomsich
      • [U-Boot] [PATCH V2 3/3] sunxi: Fix A33 memory initialization   Andre Przywara
      • [U-Boot] [PATCH V2 3/3] sunxi: Fix A33 memory initialization   Philipp Tomsich
      • [U-Boot] [PATCH V2 3/3] sunxi: Fix A33 memory initialization   Michael Nazzareno Trimarchi
      • [U-Boot] [PATCH V2 3/3] sunxi: Fix A33 memory initialization   Andre Przywara
  • [U-Boot] [PATCH V2 1/3] sunxi: Use clrsetbits_le32 instead of multiple instruction   Jagan Teki
• [U-Boot] [PATCH] sf: Add Macronix MX25R6435F SPI NOR flash to flash parameters array   Jagan Teki
  • [U-Boot] [PATCH] sf: Add Macronix MX25R6435F SPI NOR flash to flash parameters array   Vignesh R
• [U-Boot] [PATCH 1/3] videomodes: Allow EDID timings where hsync/vsync pulse is 0   Jagan Teki
  • [U-Boot] [PATCH 1/3] videomodes: Allow EDID timings where hsync/vsync pulse is 0   Priit Laes
  • [U-Boot] [PATCH 1/3] videomodes: Allow EDID timings where hsync/vsync pulse is 0   Anatolij Gustschin
• [U-Boot] Pull request: u-boot-sunxi/master   Jagan Teki
  • [U-Boot] Pull request: u-boot-sunxi/master   Tom Rini
  • [U-Boot] Pull request: u-boot-sunxi/master   Jagan Teki
    • [U-Boot] Pull request: u-boot-sunxi/master   Tom Rini
• [U-Boot] configs: move CONFIG_SPL_TEXT_BASE to Kconfig   Simon Goldschmidt
  • [U-Boot] configs: move CONFIG_SPL_TEXT_BASE to Kconfig   Tom Rini
• [U-Boot] [PATCH] ARM: am3517_evm: Enable Falcon Mode   Adam Ford
  • [U-Boot] ARM: am3517_evm: Enable Falcon Mode   Tom Rini
• [U-Boot] [PATCH 1/2] nyan-big: change spi delay   Tristan Bastian
• [U-Boot] [REGRESSION] tegra: efi: EFI boot on nyan-big/tegra124 not possible   Tristan Bastian
• [U-Boot] [PATCH] ARM: tegra: enable ums on nyan boards   Tristan Bastian
  • [U-Boot] [PATCH] ARM: tegra: enable ums on nyan boards   Stephen Warren
• [U-Boot] [PATCH v2] ARM: tegra: enable ums on nyan boards   Tristan Bastian
  • [U-Boot] [PATCH v2] ARM: tegra: enable ums on nyan boards   Stephen Warren
  • [U-Boot] [PATCH v2] ARM: tegra: enable ums on nyan boards   Tristan Bastian
• [U-Boot] [PATCH] ARM: dts: uniphier: sync with Linux 5.0-rc2   Masahiro Yamada
• [U-Boot] [PATCH 0/2] x530: Enable watchdog   Chris Packham
  • [U-Boot] [PATCH 1/2] watchdog: orion_wdt: support SPL usage   Chris Packham
    • [U-Boot] [PATCH 1/2] watchdog: orion_wdt: support SPL usage   Stefan Roese
  • [U-Boot] [PATCH 2/2] arm: mvebu: x530: Enable watchdog in SPL and U-Boot   Chris Packham
    • [U-Boot] [PATCH 2/2] arm: mvebu: x530: Enable watchdog in SPL and U-Boot   Chris Packham
    • [U-Boot] [PATCH 2/2] arm: mvebu: x530: Enable watchdog in SPL and U-Boot   Stefan Roese
      • [U-Boot] [PATCH 2/2] arm: mvebu: x530: Enable watchdog in SPL and U-Boot   Chris Packham
      • [U-Boot] [PATCH 2/2] arm: mvebu: x530: Enable watchdog in SPL and U-Boot   Chris Packham
      • [U-Boot] [PATCH 2/2] arm: mvebu: x530: Enable watchdog in SPL and U-Boot   Chris Packham
• [U-Boot] [PATCH] ARM: da8xxevm: Add NAND instructions for da850-evm to README   Adam Ford
  • [U-Boot] ARM: da8xxevm: Add NAND instructions for da850-evm to README   Tom Rini
• [U-Boot] [v2, 1/3] mmc: fsl_esdhc: add esdhc_imx flag   Y.b. Lu
  • [U-Boot] [v2, 2/3] mmc: fsl_esdhc: clean up register definition   Y.b. Lu
  • [U-Boot] [v2, 3/3] mmc: fsl_esdhc: clarify i.MX eSDHC specific functions   Y.b. Lu
  • [U-Boot] [v2, 1/3] mmc: fsl_esdhc: add esdhc_imx flag   Peng Fan
  • [U-Boot] [v2, 1/3] mmc: fsl_esdhc: add esdhc_imx flag   Lukasz Majewski
    • [U-Boot] [v2, 1/3] mmc: fsl_esdhc: add esdhc_imx flag   Y.b. Lu
      • [U-Boot] [v2, 1/3] mmc: fsl_esdhc: add esdhc_imx flag   Lukasz Majewski
      • [U-Boot] [v2, 1/3] mmc: fsl_esdhc: add esdhc_imx flag   Y.b. Lu
      • [U-Boot] [v2, 1/3] mmc: fsl_esdhc: add esdhc_imx flag   Y.b. Lu
• [U-Boot] [PATCH] misc: fs_loader: Replace label with DT phandle   tien.fong.chee at intel.com
  • [U-Boot] [PATCH] misc: fs_loader: Replace label with DT phandle   Chee, Tien Fong
• [U-Boot] [PATCH] fpga: Replace char * with const char * for filename   tien.fong.chee at intel.com
  • [U-Boot] [PATCH] fpga: Replace char * with const char * for filename   Michal Simek
    • [U-Boot] [PATCH] fpga: Replace char * with const char * for filename   Chee, Tien Fong
      • [U-Boot] [PATCH] fpga: Replace char * with const char * for filename   Michal Simek
• [U-Boot] [PATCH] ARM: dts: i.MX6QDL: add missing spba-bus to aips-bus   Hannes Schmelzer
  • [U-Boot] [PATCH] ARM: dts: i.MX6QDL: add missing spba-bus to aips-bus   Lukasz Majewski
    • [U-Boot] [PATCH] ARM: dts: i.MX6QDL: add missing spba-bus to aips-bus   Adam Ford
• [U-Boot] [PATCH] drivers/net/fec: phy_init: remove redundant logic   Hannes Schmelzer
• [U-Boot] [PATCH 0/4] Marvell DB-XC3-24G4XG board support   Chris Packham
  • [U-Boot] [PATCH 4/4] arm: mvebu: Add DB-XC3-24G4XG board   Chris Packham
    • [U-Boot] [PATCH 4/4] arm: mvebu: Add DB-XC3-24G4XG board   Stefan Roese
      • [U-Boot] [PATCH 4/4] arm: mvebu: Add DB-XC3-24G4XG board   Chris Packham
• [U-Boot] [PATCH 1/4] arm: sync armada-xp dts files from Linux 5.0   Chris Packham
• [U-Boot] [PATCH 2/4] arm: mvebu: Add Marvell's integrated CPUs   Chris Packham
  • [U-Boot] [PATCH 2/4] arm: mvebu: Add Marvell's integrated CPUs   Stefan Roese
    • [U-Boot] [PATCH 2/4] arm: mvebu: Add Marvell's integrated CPUs   Chris Packham
      • [U-Boot] [PATCH 2/4] arm: mvebu: Add Marvell's integrated CPUs   Stefan Roese
• [U-Boot] [PATCH 3/4] arm: mvebu: NAND clock support for MSYS devices   Chris Packham
• [U-Boot] [PATCH] usb: Select USB_MUSB_DSPS with USB_MUSB_TI   Alex Kiernan
  • [U-Boot] [PATCH] usb: Select USB_MUSB_DSPS with USB_MUSB_TI   Hannes Schmelzer
• [U-Boot] [PATCH] board/BuR/brppt1: fix ethernet support on brppt1 boards   Hannes Schmelzer
  • [U-Boot] board/BuR/brppt1: fix ethernet support on brppt1 boards   Tom Rini
• [U-Boot] [PATCH v2 0/3] sunxi: Sync Bananapi M2+ dts files and add H5 variant   Chen-Yu Tsai
  • [U-Boot] [PATCH v2 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1   Chen-Yu Tsai
    • [U-Boot] [PATCH v2 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1   Jagan Teki
      • [U-Boot] [PATCH v2 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1   Andre Przywara
      • [U-Boot] [PATCH v2 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1   Jagan Teki
      • [U-Boot] [PATCH v2 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1   Chen-Yu Tsai
      • [U-Boot] [PATCH v2 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1   Jagan Teki
      • [U-Boot] [PATCH v2 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1   Chen-Yu Tsai
  • [U-Boot] [PATCH v2 2/3] sunxi: Rename Sinovoip BPI M2 Plus to Bananapi M2 Plus H3   Chen-Yu Tsai
    • [U-Boot] [PATCH v2 2/3] sunxi: Rename Sinovoip BPI M2 Plus to Bananapi M2 Plus H3   Jagan Teki
      • [U-Boot] [PATCH v2 2/3] sunxi: Rename Sinovoip BPI M2 Plus to Bananapi M2 Plus H3   Chen-Yu Tsai
      • [U-Boot] [PATCH v2 2/3] sunxi: Rename Sinovoip BPI M2 Plus to Bananapi M2 Plus H3   Jagan Teki
  • [U-Boot] [PATCH v2 3/3] sunxi: Add Bananapi M2+ H5 board   Chen-Yu Tsai
• [U-Boot] [PATCH 1/3] drivers: ag7xxx: add support for qca956x-s17   Rosy Song
• [U-Boot] [PATCH 2/3] mips: add initial support for qca956x referenced board   Rosy Song
  • [U-Boot] [PATCH 2/3] mips: add initial support for qca956x referenced board   Daniel Schwierzeck
• [U-Boot] [PATCH 3/3] mips: fix erros on registers macros of pll-ddr-config1-nfrac for QCA956X   Rosy Song
  • [U-Boot] [PATCH 3/3] mips: fix erros on registers macros of pll-ddr-config1-nfrac for QCA956X   Daniel Schwierzeck
• [U-Boot] [PATCH 6/6] doc: imx: habv4: Remove secure_boot.txt guide   Stefano Babic
  • [U-Boot] [PATCH 6/6] doc: imx: habv4: Remove secure_boot.txt guide   Breno Matheus Lima
  • [U-Boot] [PATCH 6/6] doc: imx: habv4: Remove secure_boot.txt guide   Fabio Estevam
    • [U-Boot] [PATCH 6/6] doc: imx: habv4: Remove secure_boot.txt guide   Stefano Babic
• [U-Boot] [PATCH v2] armv8 : fsl-layerscape : Fix hang when TFA is used.   Meenakshi Aggarwal
• [U-Boot] [PATCH RESEND 6/6] doc: imx: habv4: Remove secure_boot.txt guide   Breno Matheus Lima
• [U-Boot] [PATCH] MAINTAINERS: Update u-boot-marvell entry   Stefan Roese
  • [U-Boot] [PATCH] MAINTAINERS: Update u-boot-marvell entry   Luka Perkov
• [U-Boot] [GIT PULL] Xilinx patches for v2019.04-rc2   Michal Simek
  • [U-Boot] [GIT PULL] Xilinx patches for v2019.04-rc2   Tom Rini
• [U-Boot] [PATCH v1 0/2] Update pinctrl-uclass   Patrice Chotard
• [U-Boot] [PATCH v1 1/2] dm: pinctrl: Avoid race condition on probe for UCLASS_PINCTRL   Patrice Chotard
  • [U-Boot] [PATCH v1 1/2] dm: pinctrl: Avoid race condition on probe for UCLASS_PINCTRL   Simon Glass
• [U-Boot] [PATCH v1 2/2] dm: pinctrl: Skip gpio-controller node in pinconfig_post_bind()   Patrice Chotard
  • [U-Boot] [PATCH v1 2/2] dm: pinctrl: Skip gpio-controller node in pinconfig_post_bind()   Simon Glass
    • [U-Boot] [PATCH v1 2/2] dm: pinctrl: Skip gpio-controller node in pinconfig_post_bind()   Patrick DELAUNAY
• [U-Boot] Clock drivers for SiFive FU540   Simon Glass
• [U-Boot] [PATCH v1 0/4] Add STMFX gpio expander support for stm32mp157c-ev1 board   Patrice Chotard
• [U-Boot] [PATCH v1 1/4] pinctrl: Add STMFX GPIO expander Pinctrl/GPIO driver   Patrice Chotard
• [U-Boot] [PATCH v1 2/4] config: stm32mp15: Enable STMFX support   Patrice Chotard
• [U-Boot] [PATCH v1 3/4] board: stm32mp1: Force pinctrl driver probe in board_init()   Patrice Chotard
• [U-Boot] [PATCH v1 4/4] ARM: dts: Add STMFX gpio expander support for stm32mp157c-ev1   Patrice Chotard
• [U-Boot] [PATCH 2/3] sunxi: display: Move DDC PLL setup to HDMI init   Anatolij Gustschin
• [U-Boot] [PATCH 3/3] sunxi: display: Implement fallback to ddc probe when hpd fails   Anatolij Gustschin
• [U-Boot] [BUG] qemu-x86_defconfig does not build with GCC 8.1   Ayush Dosaj
  • [U-Boot] [BUG] qemu-x86_defconfig does not build with GCC 8.1   Ayush Dosaj
• [U-Boot] PRs, Breakage architecture   Stefano Babic
  • [U-Boot] PRs, Breakage architecture   Tom Rini
    • [U-Boot] PRs, Breakage architecture   Stefano Babic
• [U-Boot] Pull request: BCM ARM changes   Matthias Brugger
  • [U-Boot] Pull request: BCM ARM changes   Tom Rini
• [U-Boot] [PATCH v2 0/2] x530: Enable watchdog   Chris Packham
  • [U-Boot] [PATCH v2 1/2] watchdog: orion_wdt: support SPL usage   Chris Packham
  • [U-Boot] [PATCH v2 2/2] arm: mvebu: x530: Enable watchdog in SPL and U-Boot   Chris Packham
• [U-Boot] Porting to the HTG-Z920   Patrick Schuetterle
• [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion   Marcel Ziswiler
  • [U-Boot] [PATCH v1 07/22] configs: move CONFIG_MXC_OCOTP to Kconfig   Marcel Ziswiler
    • [U-Boot] [PATCH v1 07/22] configs: move CONFIG_MXC_OCOTP to Kconfig   Lukasz Majewski
  • [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion   Lukasz Majewski
• [U-Boot] [PATCH v1 01/22] add missing space in comment   Marcel Ziswiler
• [U-Boot] [PATCH v1 02/22] vf610: ddrmc: add missing include   Marcel Ziswiler
• [U-Boot] [PATCH v1 03/22] imx: bootaux: add dependency on vf610   Marcel Ziswiler
• [U-Boot] [PATCH v1 04/22] configs: move CONFIG_USB_EHCI_VF to Kconfig   Marcel Ziswiler
• [U-Boot] [PATCH v1 05/22] configs: colibri_vf: remove obsolete mmc/sd card environment   Marcel Ziswiler
• [U-Boot] [PATCH v1 06/22] configs: colibri_vf: limit size of malloc() pool before relocation   Marcel Ziswiler
• [U-Boot] [PATCH v1 08/22] ARM: dts: colibri_vf: update device trees   Marcel Ziswiler
• [U-Boot] [PATCH v1 09/22] configs: colibri_vf: disable obscure options   Marcel Ziswiler
• [U-Boot] [PATCH v1 10/22] colibri_vf: migrate pinctrl and regulators to dtb/dm   Marcel Ziswiler
• [U-Boot] [PATCH v1 11/22] colibri_vf: migrate fec, esdhc, nfc and usb to driver model   Marcel Ziswiler
• [U-Boot] [PATCH v1 12/22] config: colibri_vf: use macros from linux/sizes.h   Marcel Ziswiler
• [U-Boot] [PATCH v1 13/22] colibri_vf: add distroboot support   Marcel Ziswiler
• [U-Boot] [PATCH v1 14/22] colibri_vf: set fdtfile for distroboot   Marcel Ziswiler
• [U-Boot] [PATCH v1 15/22] colibri_vf: sync the board info message   Marcel Ziswiler
• [U-Boot] [PATCH v1 16/22] colibri_vf: enable user debug by default   Marcel Ziswiler
• [U-Boot] [PATCH v1 17/22] colibri_vf: disable undefined instruction events in user debug   Marcel Ziswiler
• [U-Boot] [PATCH v1 18/22] config: colibri_vf: enable mtd partitions via dt   Marcel Ziswiler
• [U-Boot] [PATCH v1 19/22] arm: vf610: add uart2 clock/pinmux support   Marcel Ziswiler
• [U-Boot] [PATCH v1 20/22] colibri_vf: adjust timing according to data sheet   Marcel Ziswiler
• [U-Boot] [PATCH v1 21/22] colibri_vf: use leveling evaluated by DDR validation tools   Marcel Ziswiler
• [U-Boot] [PATCH v1 22/22] colibri_vf: fix sdboot for vybrid modules   Marcel Ziswiler
• [U-Boot] [PATCH v2 0/5] Marvell DB-XC3-24G4XG board support   Chris Packham
• [U-Boot] [PATCH v2 1/5] arm: sync armada-xp dts files from Linux 5.0   Chris Packham
  • [U-Boot] [PATCH v2 1/5] arm: sync armada-xp dts files from Linux 5.0   Stefan Roese
• [U-Boot] [PATCH v2 2/5] arm: mvebu: Add Marvell's integrated CPUs   Chris Packham
  • [U-Boot] [PATCH v2 2/5] arm: mvebu: Add Marvell's integrated CPUs   Stefan Roese
• [U-Boot] [PATCH v2 3/5] arm: mvebu: NAND clock support for MSYS devices   Chris Packham
  • [U-Boot] [PATCH v2 3/5] arm: mvebu: NAND clock support for MSYS devices   Stefan Roese
• [U-Boot] [PATCH v2 4/5] tools: kwbimage: don't adjust for image_header for Armada MSYS   Chris Packham
  • [U-Boot] [PATCH v2 4/5] tools: kwbimage: don't adjust for image_header for Armada MSYS   Stefan Roese
    • [U-Boot] [PATCH v2 4/5] tools: kwbimage: don't adjust for image_header for Armada MSYS   Chris Packham
      • [U-Boot] [PATCH v2 4/5] tools: kwbimage: don't adjust for image_header for Armada MSYS   Stefan Roese
• [U-Boot] [PATCH v2 5/5] arm: mvebu: Add DB-XC3-24G4XG board   Chris Packham
  • [U-Boot] [PATCH v2 5/5] arm: mvebu: Add DB-XC3-24G4XG board   Stefan Roese
• [U-Boot] [PATCH 0/2] lib/vsprintf: print '?' for illegal Unicode sequence   Heinrich Schuchardt
  • [U-Boot] [PATCH 2/2] test: adjust names of Unicode test functions   Heinrich Schuchardt
• [U-Boot] [PATCH 1/2] lib/vsprintf: print '?' for illegal Unicode sequence   Heinrich Schuchardt
• [U-Boot] [PATCH 1/2] davinci: da850evm: Move BSS to SDRAM because SRAM is full   Adam Ford
  • [U-Boot] [PATCH 2/2] ARM: davinci: da850evm: Enable SPL_OF_CONTROL without PLATDATA   Adam Ford
• [U-Boot] [PATCH V2 1/2] davinci: da850evm: Move BSS to SDRAM because SRAM is full   Adam Ford
  • [U-Boot] [PATCH V2 2/2] ARM: davinci: da850evm: Enable SPL_OF_CONTROL without PLATDATA   Adam Ford
  • [U-Boot] [U-Boot, V2, 1/2] davinci: da850evm: Move BSS to SDRAM because SRAM is full   Tom Rini
• [U-Boot] [PATCH v3 0/9] arm: exynos: Fix reboot on Odroid HC1   Krzysztof Kozlowski
  • [U-Boot] [PATCH v3 1/9] adc: exynos-adc: Fix wrong bit operation used to stop the ADC   Krzysztof Kozlowski
  • [U-Boot] [PATCH v3 2/9] power: regulator: s2mps11: Fix step for LDO27 and LDO35   Krzysztof Kozlowski
  • [U-Boot] [PATCH v3 3/9] arm: exynos: Detect revision later, when all resources are ready   Krzysztof Kozlowski
    • [U-Boot] [PATCH v3 3/9] arm: exynos: Detect revision later, when all resources are ready   Lukasz Majewski
  • [U-Boot] [PATCH v3 4/9] arm: exynos: odroid-xu3: Display info late to have proper type   Krzysztof Kozlowski
  • [U-Boot] [PATCH v3 5/9] arm: exynos: Wait till ADC stabilizes before checking Odroid HC1 revision   Krzysztof Kozlowski
  • [U-Boot] [PATCH v3 6/9] regulator: Add support for ramp delay   Krzysztof Kozlowski
    • [U-Boot] [PATCH v3 6/9] regulator: Add support for ramp delay   Torsten Duwe
    • [U-Boot] [PATCH v3 6/9] regulator: Add support for ramp delay   Krzysztof Kozlowski
      • [U-Boot] [PATCH v3 6/9] regulator: Add support for ramp delay   Torsten Duwe
      • [U-Boot] [PATCH v3 6/9] regulator: Add support for ramp delay   Krzysztof Kozlowski
  • [U-Boot] [PATCH v3 7/9] power: regulator: s2mps11: Add enable delay   Krzysztof Kozlowski
  • [U-Boot] [PATCH v3 8/9] arm: dts: exynos: Add supply for ADC block to Odroid XU3 family   Krzysztof Kozlowski
  • [U-Boot] [PATCH v3 9/9] arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid XU3 family   Krzysztof Kozlowski
  • [U-Boot] [PATCH v3 0/9] arm: exynos: Fix reboot on Odroid HC1   Anand Moon
• [U-Boot] MTD: nand: mxs_nand: Allow driver to auto setup ECC in SPL   sbabic at denx.de
• [U-Boot] MTD: mxs_nand: Fix BCH read timeout error on boards requiring ECC   sbabic at denx.de
• [U-Boot] [U-Boot, 3/6] doc: imx: habv4: Add Secure Boot guide for i.MX6 and i.MX7 non-SPL targets   sbabic at denx.de
• [U-Boot] [U-Boot, 4/6] doc: imx: habv4: Add Secure Boot guide for i.MX6 and i.MX7 SPL targets   sbabic at denx.de
• [U-Boot] [U-Boot,2/6] doc: imx: habv4: Add HABv4 introduction   sbabic at denx.de
• [U-Boot] [U-Boot, 1/6] doc: imx: habv4: Remove extra hab directory for a cleaner documentation structure   sbabic at denx.de
• [U-Boot] ARM: imx6q_logic: Enable SPL Booting from NAND   sbabic at denx.de
• [U-Boot] MTD: NAND: mxs_nand_init_dma: Make mxs_nand_init_dma static   sbabic at denx.de
• [U-Boot] [U-Boot, RESEND, 1/3] ARM: dts: imx6ul-lite*: add DTS files for liteSOM and liteboard   sbabic at denx.de
• [U-Boot] net: dm: fec: Fix regulator enable when using DM_REGULATOR   sbabic at denx.de
• [U-Boot] ARM: imx6q_logic: Correct phy fixup for broken ethernet   sbabic at denx.de
• [U-Boot] [U-Boot, v2, 2/3] ddr: vybrid: Provide code to perform on-boot calibration   sbabic at denx.de
• [U-Boot] [U-Boot,5/6] doc: imx: habv4: Move encrypted boot guide   sbabic at denx.de
• [U-Boot] Pull request: u-boot-imx u -boot-imx-201900216   Stefano Babic
  • [U-Boot] Pull request: u-boot-imx u -boot-imx-201900216   Tom Rini
• [U-Boot] [U-Boot, v2, 3/3] ddr: vybrid: Add calibration code to memory controler's (DDRMC) setup code   sbabic at denx.de
• [U-Boot] [U-Boot, v2, 1/3] ddr: vybrid: Add DDRMC calibration related registers (DQS to DQ)   sbabic at denx.de
• [U-Boot] [PATCH 1/1] efi_loader: documentation of image loader   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: do not miss last relocation block   Heinrich Schuchardt
• [U-Boot] [PATCH 1/2] ARM: DTS: omap3-u-boot.dtsi   Adam Ford
  • [U-Boot] [PATCH 2/2] ARM: omap3_logic: Enable SPL booting device tree   Adam Ford
    • [U-Boot] [PATCH 2/2] ARM: omap3_logic: Enable SPL booting device tree   Tom Rini
      • [U-Boot] [PATCH 2/2] ARM: omap3_logic: Enable SPL booting device tree   Derald D. Woods
      • [U-Boot] [PATCH 2/2] ARM: omap3_logic: Enable SPL booting device tree   Tom Rini
      • [U-Boot] [PATCH 2/2] ARM: omap3_logic: Enable SPL booting device tree   Adam Ford
      • [U-Boot] [PATCH 2/2] ARM: omap3_logic: Enable SPL booting device tree   Tom Rini
      • [U-Boot] [PATCH 2/2] ARM: omap3_logic: Enable SPL booting device tree   Simon Goldschmidt
      • [U-Boot] [PATCH 2/2] ARM: omap3_logic: Enable SPL booting device tree   Derald D. Woods
      • [U-Boot] [PATCH 2/2] ARM: omap3_logic: Enable SPL booting device tree   Adam Ford
    • [U-Boot] [U-Boot, 2/2] ARM: omap3_logic: Enable SPL booting device tree   Tom Rini
  • [U-Boot] [PATCH 1/2] ARM: DTS: omap3-u-boot.dtsi   Tom Rini
    • [U-Boot] [PATCH 1/2] ARM: DTS: omap3-u-boot.dtsi   Adam Ford
  • [U-Boot] [PATCH 1/2] ARM: DTS: omap3-u-boot.dtsi   Derald D. Woods
  • [U-Boot] [U-Boot,1/2] ARM: DTS: omap3-u-boot.dtsi   Tom Rini
• [U-Boot] [RFC 1/1] efi_loader: in situ relocation   Heinrich Schuchardt
  • [U-Boot] [RFC 1/1] efi_loader: in situ relocation   Heinrich Schuchardt
    • [U-Boot] [RFC 1/1] efi_loader: in situ relocation   AKASHI Takahiro
      • [U-Boot] [RFC 1/1] efi_loader: in situ relocation   Heinrich Schuchardt
      • [U-Boot] [RFC 1/1] efi_loader: in situ relocation   Alexander Graf
      • [U-Boot] [RFC 1/1] efi_loader: in situ relocation   Heinrich Schuchardt
      • [U-Boot] [RFC 1/1] efi_loader: in situ relocation   AKASHI Takahiro
• [U-Boot] [PATCH] ARM: imx6_logic: Fix typo in FDT address   Adam Ford
• [U-Boot] [PATCH] cmd/fs: fix build if CMD_BOOTEFI is not set   Gervais, Francois
  • [U-Boot] cmd/fs: fix build if CMD_BOOTEFI is not set   Tom Rini
• [U-Boot] [PATCH 1/2] omap3_beagle: Update for DM SPL support   Tom Rini
  • [U-Boot] [PATCH 2/2] omap3_beagle: Enable DM_SPI   Tom Rini
    • [U-Boot] [U-Boot,2/2] omap3_beagle: Enable DM_SPI   Tom Rini
  • [U-Boot] [PATCH 1/2] omap3_beagle: Update for DM SPL support   Derald D. Woods
  • [U-Boot] [U-Boot,1/2] omap3_beagle: Update for DM SPL support   Tom Rini
• [U-Boot] [PATCH] ARM: omap3: evm: Update DM SPL support   Derald D. Woods
  • [U-Boot] [PATCH] ARM: omap3: evm: Update DM SPL support   Tom Rini
  • [U-Boot] ARM: omap3: evm: Update DM SPL support   Tom Rini
• [U-Boot] [PATCH v2 00/34] x86: Add support for sound   Simon Glass
  • [U-Boot] [PATCH v2 01/34] log: Fix up Kconfig log level names   Simon Glass
    • [U-Boot] [PATCH v2 01/34] log: Fix up Kconfig log level names   Bin Meng
  • [U-Boot] [PATCH v2 02/34] log: Add a Kconfig option to set the default log level   Simon Glass
  • [U-Boot] [PATCH v2 03/34] log: Add documentation for convenience functions   Simon Glass
  • [U-Boot] [PATCH v2 04/34] log: Allow #define LOG_DEBUG to enable logging in a file   Simon Glass
    • [U-Boot] [PATCH v2 04/34] log: Allow #define LOG_DEBUG to enable logging in a file   Bin Meng
  • [U-Boot] [PATCH v2 05/34] dm: syscon: Don't require a regmap for PCI devices   Simon Glass
  • [U-Boot] [PATCH v2 06/34] i2c: designware: Add error checking on init   Simon Glass
    • [U-Boot] [PATCH v2 06/34] i2c: designware: Add error checking on init   Heiko Schocher
  • [U-Boot] [PATCH v2 07/34] pci: Don't export pci_hose_config_device()   Simon Glass
  • [U-Boot] [PATCH v2 08/34] pci: Fix comment in struct pci_child_platdata   Simon Glass
  • [U-Boot] [PATCH v2 09/34] gpio: Show inactive GPIOs when explicitly requested   Simon Glass
    • [U-Boot] [PATCH v2 09/34] gpio: Show inactive GPIOs when explicitly requested   Bin Meng
      • [U-Boot] [PATCH v2 09/34] gpio: Show inactive GPIOs when explicitly requested   Simon Glass
  • [U-Boot] [PATCH v2 10/34] gpio: Use case-insentive matching on the GPIO name   Simon Glass
  • [U-Boot] [PATCH v2 11/34] pci: Add IDs for Intel high-definition audio   Simon Glass
    • [U-Boot] [PATCH v2 11/34] pci: Add IDs for Intel high-definition audio   Bin Meng
  • [U-Boot] [PATCH v2 12/34] sandbox: Add a note about the growing state_info struct   Simon Glass
  • [U-Boot] [PATCH v2 13/34] x86: Adjust I/O macros to work on 64-bit machines   Simon Glass
  • [U-Boot] [PATCH v2 14/34] x86: samus: Increase the pre-reloc memory   Simon Glass
  • [U-Boot] [PATCH v2 15/34] x86: link: Increase malloc size and decrease code size   Simon Glass
  • [U-Boot] [PATCH v2 16/34] x86: sandbox: pch: Add a CONFIG option for PCH   Simon Glass
  • [U-Boot] [PATCH v2 17/34] sandbox: pch: Add a test for the PCH uclass   Simon Glass
    • [U-Boot] [PATCH v2 17/34] sandbox: pch: Add a test for the PCH uclass   Bin Meng
      • [U-Boot] [PATCH v2 17/34] sandbox: pch: Add a test for the PCH uclass   Simon Glass
  • [U-Boot] [PATCH v2 18/34] pch: Add ioctl support   Simon Glass
  • [U-Boot] [PATCH v2 19/34] x86: ivybridge: Add a way to get the HDA config setting   Simon Glass
  • [U-Boot] [PATCH v2 20/34] sound: Mark sound_setup() as optional   Simon Glass
  • [U-Boot] [PATCH v2 21/34] sound: Add uclass operations for beeping   Simon Glass
  • [U-Boot] [PATCH v2 22/34] sound: Add support for Intel HDA   Simon Glass
    • [U-Boot] [PATCH v2 22/34] sound: Add support for Intel HDA   Bin Meng
  • [U-Boot] [PATCH v2 23/34] sandbox: sound: Silence sound for testing   Simon Glass
    • [U-Boot] [PATCH v2 23/34] sandbox: sound: Silence sound for testing   Bin Meng
  • [U-Boot] [PATCH v2 24/34] sound: x86: link: Add sound support   Simon Glass
    • [U-Boot] [PATCH v2 24/34] sound: x86: link: Add sound support   Bin Meng
  • [U-Boot] [PATCH v2 25/34] sound: x86: Add beeping support in i8254   Simon Glass
    • [U-Boot] [PATCH v2 25/34] sound: x86: Add beeping support in i8254   Bin Meng
  • [U-Boot] [PATCH v2 26/34] sound: Add a driver for the i8254 beep   Simon Glass
    • [U-Boot] [PATCH v2 26/34] sound: Add a driver for the i8254 beep   Bin Meng
  • [U-Boot] [PATCH v2 27/34] x86: coreboot: Enable the beeper sound driver   Simon Glass
  • [U-Boot] [PATCH v2 28/34] x86: broadwell: Add support for the ADSP   Simon Glass
    • [U-Boot] [PATCH v2 28/34] x86: broadwell: Add support for the ADSP   Bin Meng
  • [U-Boot] [PATCH v2 29/34] x86: broadwell: Don't bother probing the PCH for pinctrl   Simon Glass
  • [U-Boot] [PATCH v2 30/34] x86: broadwell: Add support for serial I/O devices   Simon Glass
  • [U-Boot] [PATCH v2 31/34] x86: sound: Add support for broadwell I2S   Simon Glass
  • [U-Boot] [PATCH v2 32/34] sound: Add a driver for RealTek RT5677   Simon Glass
  • [U-Boot] [PATCH v2 33/34] x86: sound: Add sound support for samus (broadwell)   Simon Glass
    • [U-Boot] [PATCH v2 33/34] x86: sound: Add sound support for samus (broadwell)   Bin Meng
  • [U-Boot] [PATCH v2 34/34] x86: Add sound support for samus   Simon Glass
  • [U-Boot] [PATCH v2 00/34] x86: Add support for sound   Bin Meng
• [U-Boot] [PATCH] ARM: at91: Apply PMECC header for NAND_BOOT only   Derald D. Woods
  • [U-Boot] [PATCH] ARM: at91: Apply PMECC header for NAND_BOOT only   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH v3 0/3] x530: Enable watchdog   Chris Packham
  • [U-Boot] [PATCH v3 1/3] watchdog: orion_wdt: support SPL usage   Chris Packham
  • [U-Boot] [PATCH v3 2/3] watchdog: orion_wdt: take timeout value in ms   Chris Packham
  • [U-Boot] [PATCH v3 3/3] arm: mvebu: x530: Enable watchdog in SPL and U-Boot   Chris Packham
• [U-Boot] [PATCH] ARM: imx6q_logic: Enable MTD and NAND_MXS_DT   Adam Ford
• [U-Boot] [PATCH] dm: Fix typo 'Watchdot' -> 'Watchdog'   Chris Packham
  • [U-Boot] dm: Fix typo 'Watchdot' -> 'Watchdog'   Tom Rini
• [U-Boot] [PATCH v4 0/3] x530: Enable watchdog   Chris Packham
  • [U-Boot] [PATCH v4 1/3] watchdog: orion_wdt: support SPL usage   Chris Packham
  • [U-Boot] [PATCH v4 2/3] watchdog: orion_wdt: take timeout value in ms   Chris Packham
    • [U-Boot] [PATCH v4 2/3] watchdog: orion_wdt: take timeout value in ms   Chris Packham
      • [U-Boot] [PATCH v4 2/3] watchdog: orion_wdt: take timeout value in ms   Chris Packham
    • [U-Boot] [PATCH v4 2/3] watchdog: orion_wdt: take timeout value in ms   Stefan Roese
  • [U-Boot] [PATCH v4 3/3] arm: mvebu: x530: Enable watchdog in SPL and U-Boot   Chris Packham
    • [U-Boot] [PATCH v4 3/3] arm: mvebu: x530: Enable watchdog in SPL and U-Boot   Stefan Roese
• [U-Boot] [PATCH v2 0/3] Add Ethernet support for Poplar board   Shawn Guo
  • [U-Boot] [PATCH v2 1/3] reset: add reset driver for HiSilicon platform   Shawn Guo
  • [U-Boot] [PATCH v2 2/3] net: add higmacv300 Ethernet driver for HiSilicon platform   Shawn Guo
  • [U-Boot] [PATCH v2 3/3] poplar: enable Ethernet driver support   Shawn Guo
• [U-Boot] [PATCH v1] ARM: socfpga: stratix10: Return valid error code from FPGA driver   chee.hong.ang at intel.com
  • [U-Boot] [PATCH v1] ARM: socfpga: stratix10: Return valid error code from FPGA driver   Marek Vasut
• [U-Boot] [PATCH v1] mmc: dwmmc: Enable small delay before returning error   chee.hong.ang at intel.com
  • [U-Boot] [PATCH v1] mmc: dwmmc: Enable small delay before returning error   Marek Vasut
    • [U-Boot] [PATCH v1] mmc: dwmmc: Enable small delay before returning error   Ang, Chee Hong
      • [U-Boot] [PATCH v1] mmc: dwmmc: Enable small delay before returning error   Marek Vasut
      • [U-Boot] [PATCH v1] mmc: dwmmc: Enable small delay before returning error   Ang, Chee Hong
      • [U-Boot] [PATCH v1] mmc: dwmmc: Enable small delay before returning error   Marek Vasut
      • [U-Boot] [PATCH v1] mmc: dwmmc: Enable small delay before returning error   Ang, Chee Hong
      • [U-Boot] [PATCH v1] mmc: dwmmc: Enable small delay before returning error   Marek Vasut
• [U-Boot] [PATCH 0/1] GigaDevice id update   Jiri Kastner
  • [U-Boot] [PATCH 1/1] added missing GigaDevice chips   Jiri Kastner
• [U-Boot] [PATCH] cmd: pcmcia: Build only if CONFIG_CMD_PCMCIA=y   Ismael Luceno Cortes
  • [U-Boot] cmd: pcmcia: Build only if CONFIG_CMD_PCMCIA=y   Tom Rini
• [U-Boot] [PATCH 1/1] added missing GigaDevice chips   Stefan Roese
• [U-Boot] [PATCH] mips: mt76xx: linkit: Add mtd command support   Stefan Roese
  • [U-Boot] [PATCH] mips: mt76xx: linkit: Add mtd command support   Daniel Schwierzeck
• [U-Boot] [PATCH v2 0/1] mtd: added missing GigaDevice chips   Jiri Kastner
  • [U-Boot] [PATCH v2 1/1] mtd: added missing GigaDevice chips   Jiri Kastner
    • [U-Boot] [PATCH v2 1/1] mtd: added missing GigaDevice chips   Vignesh R
      • [U-Boot] [PATCH v2 1/1] mtd: added missing GigaDevice chips   Jiri Kastner
• [U-Boot] [PATCH] coreboot: add support fot CB_TAG_BOOT_MEDIA_PARAMS   Christian Gmeiner
  • [U-Boot] [PATCH] coreboot: add support fot CB_TAG_BOOT_MEDIA_PARAMS   Bin Meng
    • [U-Boot] [PATCH] coreboot: add support fot CB_TAG_BOOT_MEDIA_PARAMS   Christian Gmeiner
      • [U-Boot] [PATCH] coreboot: add support fot CB_TAG_BOOT_MEDIA_PARAMS   Simon Glass
• [U-Boot] [PATCH] hsdk: readme: Suggest getting pyelftools with pip   Alexey Brodkin
• [U-Boot] [PATCH] test: py: Extend fpga test with fit image with external data   Michal Simek
  • [U-Boot] [PATCH] test: py: Extend fpga test with fit image with external data   Simon Glass
• [U-Boot] [PATCH 1/6] ARM: rmobile: Imply clock drivers per SoC   Marek Vasut
  • [U-Boot] [PATCH 2/6] ARM: rmobile: Imply pinctrl drivers per SoC   Marek Vasut
  • [U-Boot] [PATCH 3/6] clk: rmobile: Drop def_bool per SoC   Marek Vasut
  • [U-Boot] [PATCH 4/6] pinctrl: renesas: Drop def_bool per SoC   Marek Vasut
  • [U-Boot] [PATCH 5/6] ARM: rmobile: Imply SoC per board   Marek Vasut
  • [U-Boot] [PATCH 6/6] ARM: rmobile: Sync Gen3 defconfigs   Marek Vasut
• [U-Boot] [PATCH] arm: fix hvc call   Alexander Graf
  • [U-Boot] [PATCH] arm: fix hvc call   Ibai Erkiaga
  • [U-Boot] [PATCH] arm: fix hvc call   Ibai Erkiaga Elorza
    • [U-Boot] [PATCH] arm: fix hvc call   Alexander Graf
      • [U-Boot] [PATCH] arm: fix hvc call   Ibai Erkiaga Elorza
• [U-Boot] [PATCH v3 0/7] android: implement A/B boot process   Igor Opaniuk
  • [U-Boot] [PATCH v3 2/7] disk: part: Extend API to get partition info   Igor Opaniuk
  • [U-Boot] [PATCH v3 3/7] common: Implement A/B metadata   Igor Opaniuk
  • [U-Boot] [PATCH v3 4/7] cmd: Add 'ab_select' command   Igor Opaniuk
  • [U-Boot] [PATCH v3 5/7] test/py: Add base test case for A/B updates   Igor Opaniuk
  • [U-Boot] [PATCH v3 6/7] doc: android: Add simple guide for A/B updates   Igor Opaniuk
  • [U-Boot] [PATCH v3 7/7] env: am57xx: Implement A/B boot process   Igor Opaniuk
  • [U-Boot] [PATCH v3 0/7] android: implement A/B boot process   Sam Protsenko
• [U-Boot] [PATCH v3 1/7] cmd: part: Add 'number' sub-command   Igor Opaniuk
• [U-Boot] [PATCH v2 0/7] Add netcp networking support on K2G ICE EVM   Murali Karicheri
  • [U-Boot] [PATCH v2 3/7] net: netcp: add support for phy with rgmii ids   Murali Karicheri
    • [U-Boot] [PATCH v2 3/7] net: netcp: add support for phy with rgmii ids   Grygorii Strashko
  • [U-Boot] [PATCH v2 5/7] k2g: config enable ti phy dp83867 for k2g   Murali Karicheri
    • [U-Boot] [PATCH v2 5/7] k2g: config enable ti phy dp83867 for k2g   Tom Rini
  • [U-Boot] [PATCH v2 7/7] ARM: dts: k2g-ice: add dt node for netcp   Murali Karicheri
• [U-Boot] [PATCH v2 1/7] ARM: k2g-ice: Add pinmux support for rgmii interface   Murali Karicheri
• [U-Boot] [PATCH v2 2/7] ARM: k2g-gp-evm: update to rgmii pinmux configuration   Murali Karicheri
• [U-Boot] [PATCH v2 4/7] ARM: k2g: add a workaround to reset the phy   Murali Karicheri
• [U-Boot] [PATCH v2 6/7] ARM: dts: k2g-evm: remove unused phy-mode property from phy node   Murali Karicheri
• [U-Boot] [PATCH] L3 cache : arch : arm : lib : Flush L3 after relocation   Meenakshi Aggarwal
  • [U-Boot] [PATCH] L3 cache : arch : arm : lib : Flush L3 after relocation   Prabhakar Kushwaha
    • [U-Boot] [PATCH] L3 cache : arch : arm : lib : Flush L3 after relocation   Meenakshi Aggarwal
      • [U-Boot] [PATCH] L3 cache : arch : arm : lib : Flush L3 after relocation   Prabhakar Kushwaha
      • [U-Boot] [PATCH] L3 cache : arch : arm : lib : Flush L3 after relocation   Stefan Roese
  • [U-Boot] [PATCH] L3 cache : arch : arm : lib : Flush L3 after relocation   Prabhakar Kushwaha
• [U-Boot] Pull request for EFI subsystem in U-Boot v2019.04-rc2   Heinrich Schuchardt
  • [U-Boot] Pull request for EFI subsystem in U-Boot v2019.04-rc2   Tom Rini
• [U-Boot] [PATCH 1/1] cmd: add exception command   Heinrich Schuchardt
  • [U-Boot] [PATCH 1/1] cmd: add exception command   Tom Rini
• [U-Boot] [PATCH 3/3] logos: Add the TechNexion's logo   Fabio Estevam
• [U-Boot] [PATCH] spi: omap3: fix set_wordlen() reading from incorrect address for CHCONF   David Rivshin
  • [U-Boot] spi: omap3: fix set_wordlen() reading from incorrect address for CHCONF   Tom Rini
• [U-Boot] February community conf call minutes   Tom Rini
  • [U-Boot] February community conf call minutes   Heiko Schocher
• [U-Boot] [PATCH] MTD: mxs_nand_spl: Redo the way nand_init initializes   Adam Ford
• [U-Boot] [PATCH] ARM: cache: Fix incorrect bitwise operation   Marek Vasut
  • [U-Boot] [PATCH] ARM: cache: Fix incorrect bitwise operation   Simon Goldschmidt
  • [U-Boot] [PATCH] ARM: cache: Fix incorrect bitwise operation   Dinh Nguyen
  • [U-Boot] ARM: cache: Fix incorrect bitwise operation   Tom Rini
• [U-Boot] [PATCH] ARM: socfpga: Configure PL310 latencies   Marek Vasut
  • [U-Boot] [PATCH] ARM: socfpga: Configure PL310 latencies   Simon Goldschmidt
    • [U-Boot] [PATCH] ARM: socfpga: Configure PL310 latencies   Dinh Nguyen
  • [U-Boot] [PATCH] ARM: socfpga: Configure PL310 latencies   Dinh Nguyen
• [U-Boot] [ANN] U-Boot v2019.04-rc2 released   Tom Rini
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
  • [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
  • [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [PATCH] ARM: rmobile: Convert Gen2 to OF_SEPARATE   Marek Vasut
• [U-Boot] [PATCH v9 0/7] Add support for loading FPGA bitstream   tien.fong.chee at intel.com
  • [U-Boot] [PATCH v9 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   tien.fong.chee at intel.com
    • [U-Boot] [PATCH v9 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Michal Simek
      • [U-Boot] [PATCH v9 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Chee, Tien Fong
      • [U-Boot] [PATCH v9 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Michal Simek
      • [U-Boot] [PATCH v9 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Dalon L Westergreen
      • [U-Boot] [PATCH v9 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Chee, Tien Fong
      • [U-Boot] [PATCH v9 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Michal Simek
      • [U-Boot] [PATCH v9 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   Chee, Tien Fong
  • [U-Boot] [PATCH v9 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   tien.fong.chee at intel.com
    • [U-Boot] [PATCH v9 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   Michal Simek
      • [U-Boot] [PATCH v9 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   Chee, Tien Fong
      • [U-Boot] [PATCH v9 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   Michal Simek
      • [U-Boot] [PATCH v9 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   Chee, Tien Fong
      • [U-Boot] [PATCH v9 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   Michal Simek
    • [U-Boot] [PATCH v9 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   Michal Simek
      • [U-Boot] [PATCH v9 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   Chee, Tien Fong
  • [U-Boot] [PATCH v9 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   tien.fong.chee at intel.com
    • [U-Boot] [PATCH v9 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   Michal Simek
      • [U-Boot] [PATCH v9 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   Chee, Tien Fong
      • [U-Boot] [PATCH v9 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   Chee, Tien Fong
      • [U-Boot] [PATCH v9 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   Michal Simek
      • [U-Boot] [PATCH v9 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   Chee, Tien Fong
      • [U-Boot] [PATCH v9 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   Chee, Tien Fong
  • [U-Boot] [PATCH v9 4/7] ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK   tien.fong.chee at intel.com
  • [U-Boot] [PATCH v9 5/7] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs   tien.fong.chee at intel.com
  • [U-Boot] [PATCH v9 6/7] ARM: socfpga: Synchronize the configuration for A10 SoCDK   tien.fong.chee at intel.com
  • [U-Boot] [PATCH v9 7/7] ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL   tien.fong.chee at intel.com
  • [U-Boot] [PATCH v9 0/7] Add support for loading FPGA bitstream   Chee, Tien Fong
• [U-Boot] [PATCH] treewide: Replace CONFIG_DM_SPI_FLASH with CONFIG_IS_ENABLED(DM_SPI_FLASH)   Marek Vasut
  • [U-Boot] [PATCH] treewide: Replace CONFIG_DM_SPI_FLASH with CONFIG_IS_ENABLED(DM_SPI_FLASH)   Vignesh R
    • [U-Boot] [PATCH] treewide: Replace CONFIG_DM_SPI_FLASH with CONFIG_IS_ENABLED(DM_SPI_FLASH)   Marek Vasut
  • [U-Boot] [PATCH] treewide: Replace CONFIG_DM_SPI_FLASH with CONFIG_IS_ENABLED(DM_SPI_FLASH)   Schrempf Frieder
    • [U-Boot] [PATCH] treewide: Replace CONFIG_DM_SPI_FLASH with CONFIG_IS_ENABLED(DM_SPI_FLASH)   Marek Vasut
• [U-Boot] [PATCH] spi: sh_qspi: Replace CONFIG_DM_SPI with CONFIG_IS_ENABLED(DM_SPI)   Marek Vasut
• [U-Boot] [PATCH] ARM: dts: rmobile: Force 1-bit bus width on Gen2 QSPI   Marek Vasut
• [U-Boot] [PATCH] ARM: rmobile: Convert Gen2 Stout, Porter, Silk to DM_SPI{, _FLASH}   Marek Vasut
• [U-Boot] [PATCH] board/freescale: Enable DHCP distro boot for Layerscape board   Yunfeng Ding
  • [U-Boot] [PATCH] board/freescale: Enable DHCP distro boot for Layerscape board   Yunfeng Ding
  • [U-Boot] [PATCH] board/freescale: Enable DHCP distro boot for Layerscape board   Prabhakar Kushwaha
• [U-Boot] [PATCH v3] tools: kwbimage: don't adjust for image_header for Armada MSYS   Chris Packham
  • [U-Boot] [PATCH v3] tools: kwbimage: don't adjust for image_header for Armada MSYS   Stefan Roese
• [U-Boot] Kernel hang when replace older uboot with uboot master   rosysong at rosinson.com
• [U-Boot] [BUG] ls1012afrwy: U-Boot no detect sd card   jorisoffouga
  • [U-Boot] [BUG] ls1012afrwy: U-Boot no detect sd card   Bhaskar Upadhaya
• [U-Boot] Kernel hang when replace older uboot with uboot master V2   rosysong at rosinson.com
  • [U-Boot] Kernel hang when replace older uboot with uboot master V2   Lukasz Majewski
    • [U-Boot] Kernel hang when replace older uboot with uboot master V2   rosysong at rosinson.com
      • [U-Boot] Kernel hang when replace older uboot with uboot master V2   Lukasz Majewski
      • [U-Boot] Kernel hang when replace older uboot with uboot master V2   rosysong at rosinson.com
    • [U-Boot] Kernel hang when replace older uboot with uboot master V2   rosysong at rosinson.com
• [U-Boot] [PATCH] ARM: socfpga: Clear PL310 early in SPL   Marek Vasut
  • [U-Boot] [PATCH] ARM: socfpga: Clear PL310 early in SPL   Simon Goldschmidt
    • [U-Boot] [PATCH] ARM: socfpga: Clear PL310 early in SPL   Marek Vasut
      • [U-Boot] [PATCH] ARM: socfpga: Clear PL310 early in SPL   Simon Goldschmidt
      • [U-Boot] [PATCH] ARM: socfpga: Clear PL310 early in SPL   Marek Vasut
      • [U-Boot] [PATCH] ARM: socfpga: Clear PL310 early in SPL   Simon Goldschmidt
      • [U-Boot] [PATCH] ARM: socfpga: Clear PL310 early in SPL   Marek Vasut
      • [U-Boot] [PATCH] ARM: socfpga: Clear PL310 early in SPL   Simon Goldschmidt
      • [U-Boot] [PATCH] ARM: socfpga: Clear PL310 early in SPL   Marek Vasut
      • [U-Boot] [PATCH] ARM: socfpga: Clear PL310 early in SPL   Simon Goldschmidt
      • [U-Boot] [PATCH] ARM: socfpga: Clear PL310 early in SPL   Marek Vasut
      • [U-Boot] [PATCH] ARM: socfpga: Clear PL310 early in SPL   Simon Goldschmidt
      • [U-Boot] [PATCH] ARM: socfpga: Clear PL310 early in SPL   Marek Vasut
• [U-Boot] [PATCH v2 3/4] ARM: atmel: at91sam9x5ek: enable spl support   Stefan Roese
  • [U-Boot] [PATCH v2 3/4] ARM: atmel: at91sam9x5ek: enable spl support   Eugen.Hristev at microchip.com
    • [U-Boot] [PATCH v2 3/4] ARM: atmel: at91sam9x5ek: enable spl support   Stefan Roese
      • [U-Boot] [PATCH v2 3/4] ARM: atmel: at91sam9x5ek: enable spl support   Stefan Roese
      • [U-Boot] [PATCH v2 3/4] ARM: atmel: at91sam9x5ek: enable spl support   Eugen.Hristev at microchip.com
      • [U-Boot] [PATCH v2 3/4] ARM: atmel: at91sam9x5ek: enable spl support   Stefan Roese
• [U-Boot] [PATCH] configs: dra7xx_evm: Remove ENV_IS_IN_FAT and SPL_ENV_*   Faiz Abbas
  • [U-Boot] [PATCH] configs: dra7xx_evm: Remove ENV_IS_IN_FAT and SPL_ENV_*   Tom Rini
    • [U-Boot] [PATCH] configs: dra7xx_evm: Remove ENV_IS_IN_FAT and SPL_ENV_*   Faiz Abbas
      • [U-Boot] [PATCH] configs: dra7xx_evm: Remove ENV_IS_IN_FAT and SPL_ENV_*   Tom Rini
      • [U-Boot] [PATCH] configs: dra7xx_evm: Remove ENV_IS_IN_FAT and SPL_ENV_*   Faiz Abbas
      • [U-Boot] [PATCH] configs: dra7xx_evm: Remove ENV_IS_IN_FAT and SPL_ENV_*   Lokesh Vutla
      • [U-Boot] [PATCH] configs: dra7xx_evm: Remove ENV_IS_IN_FAT and SPL_ENV_*   Faiz Abbas
      • [U-Boot] [PATCH] configs: dra7xx_evm: Remove ENV_IS_IN_FAT and SPL_ENV_*   Lokesh Vutla
      • [U-Boot] [PATCH] configs: dra7xx_evm: Remove ENV_IS_IN_FAT and SPL_ENV_*   Faiz Abbas
• [U-Boot] Extract RSA Keys from image   Jeridiah.Welti at bench.com
  • [U-Boot] Extract RSA Keys from image   Douglas Zobel
• [U-Boot] IMX6 DM_USB / DM_MMC requires OF_CONTROL?   Tim Harvey
  • [U-Boot] IMX6 DM_USB / DM_MMC requires OF_CONTROL?   Stefano Babic
    • [U-Boot] IMX6 DM_USB / DM_MMC requires OF_CONTROL?   Marcel Ziswiler
      • [U-Boot] IMX6 DM_USB / DM_MMC requires OF_CONTROL?   Tim Harvey
      • [U-Boot] IMX6 DM_USB / DM_MMC requires OF_CONTROL?   Lukasz Majewski
  • [U-Boot] IMX6 DM_USB / DM_MMC requires OF_CONTROL?   Fabio Estevam
    • [U-Boot] IMX6 DM_USB / DM_MMC requires OF_CONTROL?   Tim Harvey
      • [U-Boot] IMX6 DM_USB / DM_MMC requires OF_CONTROL?   Adam Ford
      • [U-Boot] IMX6 DM_USB / DM_MMC requires OF_CONTROL?   Fabio Estevam
• [U-Boot] [PATCH V2] ARM: rmobile: Convert Gen2 Stout, Porter, Silk to DM_SPI{, _FLASH}   Marek Vasut
• [U-Boot] [PATCH v6 7/7] cmd: efidebug: add memmap command   Heinrich Schuchardt
  • [U-Boot] [PATCH v6 7/7] cmd: efidebug: add memmap command   AKASHI Takahiro
    • [U-Boot] [PATCH v6 7/7] cmd: efidebug: add memmap command   Heinrich Schuchardt
      • [U-Boot] [PATCH v6 7/7] cmd: efidebug: add memmap command   AKASHI Takahiro
• [U-Boot] [PATCH v6 2/7] cmd: add efidebug command   Heinrich Schuchardt
  • [U-Boot] [PATCH v6 2/7] cmd: add efidebug command   AKASHI Takahiro
    • [U-Boot] [PATCH v6 2/7] cmd: add efidebug command   Heinrich Schuchardt
• [U-Boot] [PATCH v6 3/7] cmd: efidebug: add devices command   Heinrich Schuchardt
  • [U-Boot] [PATCH v6 3/7] cmd: efidebug: add devices command   Heinrich Schuchardt
  • [U-Boot] [PATCH v6 3/7] cmd: efidebug: add devices command   AKASHI Takahiro
    • [U-Boot] [PATCH v6 3/7] cmd: efidebug: add devices command   Heinrich Schuchardt
      • [U-Boot] [PATCH v6 3/7] cmd: efidebug: add devices command   AKASHI Takahiro
• [U-Boot] [PATCH v6 4/7] cmd: efidebug: add drivers command   Heinrich Schuchardt
  • [U-Boot] [PATCH v6 4/7] cmd: efidebug: add drivers command   AKASHI Takahiro
• [U-Boot] [PATCH v6 6/7] cmd: efidebug: add images command   Heinrich Schuchardt
• [U-Boot] [PATCH V2] ARM: davinci: da850evm: Enable SPL_OF_CONTROL without PLATDATA   Adam Ford
• [U-Boot] Pull request, u-boot-tegra/master   Tom Warren
  • [U-Boot] Pull request, u-boot-tegra/master   Tom Warren
    • [U-Boot] Pull request, u-boot-tegra/master   Tom Rini
• [U-Boot] [PATCH] mmc: dw_mmc: Round up descriptor end to nearest multiple of cacheline size   Marek Vasut
• [U-Boot] [PATCH] fdt: Fix FIT header verification in mkimage and conduct same checks as bootm V2   Jordan Hand
• [U-Boot] [PATCH 1/1] travis: Exclude omap from the arm926ejs job   Tom Rini
  • [U-Boot] [PATCH 1/1] travis: Exclude omap from the arm926ejs job   Tom Rini
• [U-Boot] [PATCH] imx: serial_mxc: use CONFIG_IS_ENABLED instead of ifdef   Adam Ford
  • [U-Boot] [PATCH] imx: serial_mxc: use CONFIG_IS_ENABLED instead of ifdef   Simon Glass
• [U-Boot] [PATCH v4 00/25] MTD defconfigs/Kconfigs/Makefiles heavy cleanup   Vignesh R
  • [U-Boot] [PATCH v4 00/25] MTD defconfigs/Kconfigs/Makefiles heavy cleanup   Miquel Raynal
• [U-Boot] [PATCH v8 00/15] SiFive FU540 Support   Anup Patel
  • [U-Boot] [PATCH v8 01/15] riscv: Enable create symlink using kconfig   Anup Patel
  • [U-Boot] [PATCH v8 02/15] riscv: Rename cpu/qemu to cpu/generic   Anup Patel
  • [U-Boot] [PATCH v8 03/15] riscv: Add asm/dma-mapping.h for DMA mappings   Anup Patel
  • [U-Boot] [PATCH v8 04/15] riscv: Add place-holder asm/arch/clk.h for driver compilation   Anup Patel
  • [U-Boot] [PATCH v8 05/15] riscv: generic: Ensure that U-Boot runs within 4GB for 64bit systems   Anup Patel
  • [U-Boot] [PATCH v8 06/15] net: macb: Fix clk API usage for RISC-V systems   Anup Patel
  • [U-Boot] [PATCH v8 07/15] net: macb: Fix GEM hardware detection   Anup Patel
  • [U-Boot] [PATCH v8 08/15] clk: Add SiFive FU540 PRCI clock driver   Anup Patel
  • [U-Boot] [PATCH v8 09/15] clk: Add fixed-factor clock driver   Anup Patel
    • [U-Boot] [PATCH v8 09/15] clk: Add fixed-factor clock driver   Simon Glass
      • [U-Boot] [PATCH v8 09/15] clk: Add fixed-factor clock driver   Anup Patel
  • [U-Boot] [PATCH v8 10/15] drivers: serial_sifive: Fix baud rate calculation   Anup Patel
  • [U-Boot] [PATCH v8 11/15] drivers: serial_sifive: Skip baudrate config if no input clock   Anup Patel
  • [U-Boot] [PATCH v8 12/15] cpu: Bind timer driver for boot hart   Anup Patel
  • [U-Boot] [PATCH v8 13/15] riscv: Add SiFive FU540 board support   Anup Patel
  • [U-Boot] [PATCH v8 14/15] doc: Add a readme guide for SiFive FU540   Anup Patel
  • [U-Boot] [PATCH v8 15/15] riscv: Enable CONFIG_SYS_BOOT_RAMDISK_HIGH for using initrd   Anup Patel
  • [U-Boot] [PATCH v8 00/15] SiFive FU540 Support   Tom Rini
    • [U-Boot] [PATCH v8 00/15] SiFive FU540 Support   Palmer Dabbelt
      • [U-Boot] [PATCH v8 00/15] SiFive FU540 Support   Tom Rini
      • [U-Boot] [PATCH v8 00/15] SiFive FU540 Support   Bin Meng
• [U-Boot] Please pull u-boot-fsl-qoriq master   Prabhakar Kushwaha
  • [U-Boot] Please pull u-boot-fsl-qoriq master   Tom Rini
• [U-Boot] [PATCH] armv8: lx2160a: Update CONFIG_SYS_FSL_PEBUF_BASE   Prabhakar Kushwaha
• [U-Boot] [PATCH] drivers/ddr/fsl: Update fsl_ddr_board_options as weak function   Prabhakar Kushwaha
• [U-Boot] [PATCH] armv8, lx2160a: Initialize ethernet array in serdes_init   Prabhakar Kushwaha
• [U-Boot] [PATCH v2] armv8: fsl-layerscape: reorder rgmii dpmacs' enablement   Prabhakar Kushwaha
• [U-Boot] [PATCH][v3] armv8: lx2160ardb : Add support for LX2160ARDB platform   Prabhakar Kushwaha
• [U-Boot] [PATCH v1] armv8: lx2160a: add eSDHC nodes   Prabhakar Kushwaha
• [U-Boot] [PATCH v1] configs: lx2160a: enable driver model for eSDHC   Prabhakar Kushwaha
• [U-Boot] [PATCH] armv8: lx2160a: Modify dspi1 controller intrrupts property   Prabhakar Kushwaha
• [U-Boot] [v1 1/2] armv8: dts: fsl-lx2160a: add sata node support   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/2] arm64: lx2160ardb: enable DM support for sata   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/2] lx2160: Enable support of EMC2305   Prabhakar Kushwaha
• [U-Boot] [PATCH v2] armv8:LX2160: Adds distro secure boot support.   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/1] LX2160AQDS: Adds SECURE_BOOT defconfig.   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/2] armv8: ls1043ardb: Add the nand_bootcmd definition   Prabhakar Kushwaha
• [U-Boot] [PATCH] QE: ls1043a: modify CONFIG_SYS_QE_FW_ADDR to (512*4A00) in SD Card   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/7] armv8: fsl-layerscape: ls1043a: move SCSI_AHCI and SCSI form arch/arm/cpu/armv8/fsl-layerscape/Kconfig to arch/arm/Kconfig   Prabhakar Kushwaha
• [U-Boot] [PATCH 0/4] Add Support for NAND in dra71x-evm   Faiz Abbas
  • [U-Boot] [PATCH 2/4] arm: dra7: Allow NAND to be enabled on DRA71x EVM.   Faiz Abbas
  • [U-Boot] [PATCH 3/4] configs: dra71x-evm: Add Support for NAND   Faiz Abbas
  • [U-Boot] [PATCH 4/4] configs: ti_omap5_common: Add NAND environment settings   Faiz Abbas
    • [U-Boot] [PATCH 4/4] configs: ti_omap5_common: Add NAND environment settings   Tom Rini
      • [U-Boot] [PATCH 4/4] configs: ti_omap5_common: Add NAND environment settings   Faiz Abbas
• [U-Boot] [PATCH 1/4] board: ti: dra71: Add pinmux settings for NAND on DRA71x EVM   Faiz Abbas
• [U-Boot] [PATCH] fastboot: common: fix default fastboot_boot on 64-bit   Neil Armstrong
  • [U-Boot] [PATCH] fastboot: common: fix default fastboot_boot on 64-bit   Simon Glass
• [U-Boot] ARMv8 linking: how to properly accommodate the exception vector table?   Andre Przywara
  • [U-Boot] ARMv8 linking: how to properly accommodate the exception vector table?   Alexander Graf
    • [U-Boot] ARMv8 linking: how to properly accommodate the exception vector table?   Alexander Graf
      • [U-Boot] ARMv8 linking: how to properly accommodate the exception vector table?   Andre Przywara
      • [U-Boot] ARMv8 linking: how to properly accommodate the exception vector table?   Alexander Graf
• [U-Boot] [PATCH v2 0/1] Pass board revision and serial number to the   Anton Gerasimov
  • [U-Boot] [PATCH v2 1/1] board: raspberrypi: add serial and revision to the device tree   Anton Gerasimov
    • [U-Boot] [PATCH v2 1/1] board: raspberrypi: add serial and revision to the device tree   Alexander Graf
    • [U-Boot] [PATCH v2 1/1] board: raspberrypi: add serial and revision to the device tree   Stephen Warren
      • [U-Boot] [PATCH v2 1/1] board: raspberrypi: add serial and revision to the device tree   Alexander Graf
      • [U-Boot] [PATCH v2 1/1] board: raspberrypi: add serial and revision to the device tree   Stephen Warren
      • [U-Boot] [PATCH v2 1/1] board: raspberrypi: add serial and revision to the device tree   Anton Gerasimov
• [U-Boot] v2 Tegra cleanups and Kconfig migrations   Peter Robinson
  • [U-Boot] [PATCH 1/4] Kconfig: tegra: Migrate SYS_I2C_TEGRA   Peter Robinson
  • [U-Boot] [PATCH 2/4] Kconfig: tegra: Migrate USB_EHCI_TEGRA   Peter Robinson
    • [U-Boot] [PATCH 2/4] Kconfig: tegra: Migrate USB_EHCI_TEGRA   Marek Vasut
      • [U-Boot] [PATCH 2/4] Kconfig: tegra: Migrate USB_EHCI_TEGRA   Peter Robinson
      • [U-Boot] [PATCH 2/4] Kconfig: tegra: Migrate USB_EHCI_TEGRA   Tom Warren
      • [U-Boot] [PATCH 2/4] Kconfig: tegra: Migrate USB_EHCI_TEGRA   Marek Vasut
  • [U-Boot] [PATCH 3/4] Kconfig: tegra: Migrate TEGRA_KEYBOARD   Peter Robinson
  • [U-Boot] [PATCH 4/4] nyan-big: drop CONFIG_KEYBOARD   Peter Robinson
• [U-Boot] [PATCH] net: eth-uclass: call stop only for active devices   Keerthy
  • [U-Boot] [PATCH] net: eth-uclass: call stop only for active devices   Simon Glass
  • [U-Boot] [PATCH] net: eth-uclass: call stop only for active devices   Bin Meng
    • [U-Boot] [PATCH] net: eth-uclass: call stop only for active devices   Joe Hershberger
  • [U-Boot] [PATCH] net: eth-uclass: call stop only for active devices   Joe Hershberger
    • [U-Boot] [PATCH] net: eth-uclass: call stop only for active devices   Keerthy
      • [U-Boot] [PATCH] net: eth-uclass: call stop only for active devices   Bin Meng
• [U-Boot] [PATCH] arm: lib: bootm: Push the Starting kernel print to the end   Keerthy
  • [U-Boot] [PATCH] arm: lib: bootm: Push the Starting kernel print to the end   Simon Glass
• [U-Boot] Pincontroller not getting initialized on imx6 in SPL with SPL_PINCTRL and OF_CONTROL   Adam Ford
  • [U-Boot] Pincontroller not getting initialized on imx6 in SPL with SPL_PINCTRL and OF_CONTROL   Lokesh Vutla
    • [U-Boot] Pincontroller not getting initialized on imx6 in SPL with SPL_PINCTRL and OF_CONTROL   Adam Ford
      • [U-Boot] Pincontroller not getting initialized on imx6 in SPL with SPL_PINCTRL and OF_CONTROL   Lokesh Vutla
      • [U-Boot] Pincontroller not getting initialized on imx6 in SPL with SPL_PINCTRL and OF_CONTROL   Adam Ford
      • [U-Boot] Pincontroller not getting initialized on imx6 in SPL with SPL_PINCTRL and OF_CONTROL   Adam Ford
• [U-Boot] [PATCH] armv8: Disable exception vectors in SPL by default   Alexander Graf
  • [U-Boot] [PATCH] armv8: Disable exception vectors in SPL by default   Matthias Brugger
    • [U-Boot] [PATCH] armv8: Disable exception vectors in SPL by default   Alexander Graf
• [U-Boot] [PATCH] arm: dts: imx6qdl-u-boot: Enable spba-bus at 2000000 simple bus   Adam Ford
  • [U-Boot] [PATCH] arm: dts: imx6qdl-u-boot: Enable spba-bus at 2000000 simple bus   Hannes Schmelzer
• [U-Boot] [PATCH v3 1/1] gpio: altera_pio: fix get_value   Julien Béraud
  • [U-Boot] [PATCH v3 1/1] gpio: altera_pio: fix get_value   Marek Vasut
• [U-Boot] [PATCH v2] armv8: Disable exception vectors in SPL by default   Alexander Graf
  • [U-Boot] [PATCH v2] armv8: Disable exception vectors in SPL by default   Matthias Brugger
  • [U-Boot] [PATCH v2] armv8: Disable exception vectors in SPL by default   André Przywara
• [U-Boot] [PATCH 0/2] mtd: rawnand: add STM32 FMC2 NAND flash controller driver   Christophe Kerello
  • [U-Boot] [PATCH 1/2] dt-bindings: mtd: stm32_fmc2: add STM32 FMC2 NAND controller documentation   Christophe Kerello
  • [U-Boot] [PATCH 2/2] mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver   Christophe Kerello
• [U-Boot] [PATCH] fs: ext4: cache extent data   Stephen Warren
  • [U-Boot] [PATCH] fs: ext4: cache extent data   Tom Rini
• [U-Boot] [PATCH 0/9] sunxi: Allow FEL capable SPLs with 32bit builds   Andre Przywara
  • [U-Boot] [PATCH 1/9] armv8: Disable exception vectors in SPL by default   Andre Przywara
  • [U-Boot] [PATCH 2/9] Makefile: use "arm64" architecture for U-Boot image files   Andre Przywara
    • [U-Boot] [PATCH 2/9] Makefile: use "arm64" architecture for U-Boot image files   Alexander Graf
    • [U-Boot] [PATCH 2/9] Makefile: use "arm64" architecture for U-Boot image files   Philipp Tomsich
  • [U-Boot] [PATCH 3/9] SPL: read and store arch property from U-Boot image   Andre Przywara
    • [U-Boot] [PATCH 3/9] SPL: read and store arch property from U-Boot image   Alexander Graf
      • [U-Boot] [PATCH 3/9] SPL: read and store arch property from U-Boot image   Philipp Tomsich
      • [U-Boot] [PATCH 3/9] SPL: read and store arch property from U-Boot image   Andre Przywara
      • [U-Boot] [PATCH 3/9] SPL: read and store arch property from U-Boot image   Philipp Tomsich
      • [U-Boot] [PATCH 3/9] SPL: read and store arch property from U-Boot image   Alexander Graf
  • [U-Boot] [PATCH 4/9] sunxi: introduce RMR switch to enter payloads in 64-bit mode   Andre Przywara
    • [U-Boot] [PATCH 4/9] sunxi: introduce RMR switch to enter payloads in 64-bit mode   Alexander Graf
      • [U-Boot] [PATCH 4/9] sunxi: introduce RMR switch to enter payloads in 64-bit mode   Andre Przywara
      • [U-Boot] [PATCH 4/9] sunxi: introduce RMR switch to enter payloads in 64-bit mode   Alexander Graf
      • [U-Boot] [PATCH 4/9] sunxi: introduce RMR switch to enter payloads in 64-bit mode   Philipp Tomsich
  • [U-Boot] [PATCH 5/9] sunxi: allow FIT image for 32-bit builds as well   Andre Przywara
    • [U-Boot] [PATCH 5/9] sunxi: allow FIT image for 32-bit builds as well   Alexander Graf
      • [U-Boot] [PATCH 5/9] sunxi: allow FIT image for 32-bit builds as well   André Przywara
      • [U-Boot] [PATCH 5/9] sunxi: allow FIT image for 32-bit builds as well   Alexander Graf
  • [U-Boot] [PATCH 6/9] sunxi: allow 32-bit builds for 64-bit SoCs   Andre Przywara
    • [U-Boot] [PATCH 6/9] sunxi: allow 32-bit builds for 64-bit SoCs   Alexander Graf
      • [U-Boot] [PATCH 6/9] sunxi: allow 32-bit builds for 64-bit SoCs   Andre Przywara
  • [U-Boot] [PATCH 7/9] sunxi: H5: add generic H5 32-bit SPL defconfig   Andre Przywara
  • [U-Boot] [PATCH 8/9] sunxi: A64: add generic A64 32-bit SPL defconfigs   Andre Przywara
  • [U-Boot] [PATCH 9/9] sunxi: H6: add generic H6 32-bit SPL defconfig   Andre Przywara
• [U-Boot] [v2] powerpc: t104xrdb: Add support of MTA9ADF1G72AZ DDR   Peng Ma
• [U-Boot] [PATCH] fdt: Fix FIT header verification in mkimage and conduct same checks as bootm   Simon Glass
  • [U-Boot] [PATCH v2] fdt: Fix FIT header verification in mkimage and conduct same checks as bootm   Jordan Hand
• [U-Boot] [PATCH v9 00/15] SiFive FU540 Support   Anup Patel
  • [U-Boot] [PATCH v9 01/15] riscv: Enable create symlink using kconfig   Anup Patel
  • [U-Boot] [PATCH v9 02/15] riscv: Rename cpu/qemu to cpu/generic   Anup Patel
  • [U-Boot] [PATCH v9 03/15] riscv: Add asm/dma-mapping.h for DMA mappings   Anup Patel
  • [U-Boot] [PATCH v9 04/15] riscv: Add place-holder asm/arch/clk.h for driver compilation   Anup Patel
  • [U-Boot] [PATCH v9 05/15] riscv: generic: Ensure that U-Boot runs within 4GB for 64bit systems   Anup Patel
  • [U-Boot] [PATCH v9 06/15] net: macb: Fix clk API usage for RISC-V systems   Anup Patel
    • [U-Boot] [PATCH v9 06/15] net: macb: Fix clk API usage for RISC-V systems   Joe Hershberger
  • [U-Boot] [PATCH v9 07/15] net: macb: Fix GEM hardware detection   Anup Patel
  • [U-Boot] [PATCH v9 08/15] clk: Add SiFive FU540 PRCI clock driver   Anup Patel
  • [U-Boot] [PATCH v9 09/15] clk: Add fixed-factor clock driver   Anup Patel
  • [U-Boot] [PATCH v9 10/15] drivers: serial_sifive: Fix baud rate calculation   Anup Patel
  • [U-Boot] [PATCH v9 11/15] drivers: serial_sifive: Skip baudrate config if no input clock   Anup Patel
  • [U-Boot] [PATCH v9 12/15] cpu: Bind timer driver for boot hart   Anup Patel
  • [U-Boot] [PATCH v9 13/15] riscv: Add SiFive FU540 board support   Anup Patel
  • [U-Boot] [PATCH v9 14/15] doc: Add a readme guide for SiFive FU540   Anup Patel
  • [U-Boot] [PATCH v9 15/15] riscv: Enable CONFIG_SYS_BOOT_RAMDISK_HIGH for using initrd   Anup Patel
• [U-Boot] [PATCH v7 0/7] cmd: add efidebug for efi environment   AKASHI Takahiro
  • [U-Boot] [PATCH v7 1/7] cmd: env: add "-e" option for handling UEFI variables   AKASHI Takahiro
    • [U-Boot] [PATCH v7 1/7] cmd: env: add "-e" option for handling UEFI variables   Heinrich Schuchardt
      • [U-Boot] [PATCH v7 1/7] cmd: env: add "-e" option for handling UEFI variables   AKASHI Takahiro
      • [U-Boot] [PATCH v7 1/7] cmd: env: add "-e" option for handling UEFI variables   Heinrich Schuchardt
      • [U-Boot] [PATCH v7 1/7] cmd: env: add "-e" option for handling UEFI variables   Philipp Tomsich
      • [U-Boot] [PATCH v7 1/7] cmd: env: add "-e" option for handling UEFI variables   AKASHI Takahiro
  • [U-Boot] [PATCH v7 2/7] cmd: add efidebug command   AKASHI Takahiro
    • [U-Boot] [PATCH v7 2/7] cmd: add efidebug command   Heinrich Schuchardt
      • [U-Boot] [PATCH v7 2/7] cmd: add efidebug command   AKASHI Takahiro
      • [U-Boot] [PATCH v7 2/7] cmd: add efidebug command   Heinrich Schuchardt
  • [U-Boot] [PATCH v7 3/7] cmd: efidebug: add devices command   AKASHI Takahiro
    • [U-Boot] [PATCH v7 3/7] cmd: efidebug: add devices command   Heinrich Schuchardt
  • [U-Boot] [PATCH v7 4/7] cmd: efidebug: add drivers command   AKASHI Takahiro
    • [U-Boot] [PATCH v7 4/7] cmd: efidebug: add drivers command   Heinrich Schuchardt
      • [U-Boot] [PATCH v7 4/7] cmd: efidebug: add drivers command   AKASHI Takahiro
      • [U-Boot] [PATCH v7 4/7] cmd: efidebug: add drivers command   Heinrich Schuchardt
      • [U-Boot] [PATCH v7 4/7] cmd: efidebug: add drivers command   AKASHI Takahiro
  • [U-Boot] [PATCH v7 5/7] cmd: efidebug: add dh command   AKASHI Takahiro
    • [U-Boot] [PATCH v7 5/7] cmd: efidebug: add dh command   Heinrich Schuchardt
  • [U-Boot] [PATCH v7 6/7] cmd: efidebug: add images command   AKASHI Takahiro
  • [U-Boot] [PATCH v7 7/7] cmd: efidebug: add memmap command   AKASHI Takahiro
    • [U-Boot] [PATCH v7 7/7] cmd: efidebug: add memmap command   Heinrich Schuchardt
• [U-Boot] [PATCH] .gitignore: Ignore regenerated *.dtbo files   Michal Simek
  • [U-Boot] .gitignore: Ignore regenerated *.dtbo files   Tom Rini
• [U-Boot] [PATCH] arm64: zynqmp: Disable WDT for zcu100   Michal Simek
• [U-Boot] [PATCH 1/3] Move CONFIG_FSL_ESDHC to defconfig   Y.b. Lu
  • [U-Boot] [PATCH 2/3] mmc: split fsl_esdhc driver for i.MX   Y.b. Lu
  • [U-Boot] [PATCH 3/3] Convert to use fsl_esdhc_imx for i.MX platforms   Y.b. Lu
• [U-Boot] [PATCH V2] ARM: socfpga: Clear PL310 early in SPL   Marek Vasut
  • [U-Boot] [PATCH V2] ARM: socfpga: Clear PL310 early in SPL   Simon Goldschmidt
• [U-Boot] [PATCH 1/2] mmc: tmio: Clear BUSWIDTH bit when WMODE bit is set   Marek Vasut
  • [U-Boot] [PATCH 2/2] mmc: renesas: Unconditionally set DTCNTL TAPNUM to 8   Marek Vasut
• [U-Boot] [PATCH 1/3] Add support for the MT41K128M16JT125K memory modules   Martyn Welch
  • [U-Boot] [PATCH 3/3] am335x, guardian: Add support for the bosch guardian board   Martyn Welch
    • [U-Boot] [PATCH 3/3] am335x, guardian: Add support for the bosch guardian board   Felix Brack
      • [U-Boot] [PATCH 3/3] am335x, guardian: Add support for the bosch guardian board   Martyn Welch
    • [U-Boot] [PATCH 3/3] am335x, guardian: Add support for the bosch guardian board   Tom Rini
• [U-Boot] [PATCH 2/3] env: Don't check CONFIG_ENV_OFFSET_REDUND for SPL build   Martyn Welch
  • [U-Boot] [PATCH 2/3] env: Don't check CONFIG_ENV_OFFSET_REDUND for SPL build   Tom Rini
    • [U-Boot] [PATCH 2/3] env: Don't check CONFIG_ENV_OFFSET_REDUND for SPL build   Martyn Welch
      • [U-Boot] [PATCH 2/3] env: Don't check CONFIG_ENV_OFFSET_REDUND for SPL build   Tom Rini
      • [U-Boot] [PATCH 2/3] env: Don't check CONFIG_ENV_OFFSET_REDUND for SPL build   Martyn Welch
  • [U-Boot] [PATCH 2/3] env: Don't check CONFIG_ENV_OFFSET_REDUND for SPL build   Philipp Tomsich
    • [U-Boot] [PATCH 2/3] env: Don't check CONFIG_ENV_OFFSET_REDUND for SPL build   Tom Rini
• [U-Boot] [PATCH v3 2/2] core: ofnode: Add ofnode_get_addr_size_index   Keerthy
• [U-Boot] [PATCH] spl: fit: Add support for applying DT overlay   Michal Simek
• [U-Boot] [PATCH] arm64: zynqmp: Add debug message about clearing BSS   Michal Simek
• [U-Boot] [PATCH] am335x-fb: don't override lcd_get_size()   David Rivshin
  • [U-Boot] [PATCH] am335x-fb: don't override lcd_get_size()   Hannes Schmelzer
• [U-Boot] [PATCH] cmd: clk: Handle ENODEV from clk_get_rate   Ismael Luceno Cortes
• [U-Boot] [PATCH] arm: dts: exynos: Adjust whitespace around status property   Krzysztof Kozlowski
  • [U-Boot] [PATCH] arm: dts: exynos: Adjust whitespace around status property   Simon Glass
• [U-Boot] [PATCH] imx: ventana: hexdump invalid EEPROM data   Tim Harvey
• [U-Boot] [PATCH] imx: ventana: added support for 16bit 8Gb density (1GiB) DRAM   Tim Harvey
• [U-Boot] [PATCH v3 0/7] Add netcp networking support on K2G ICE EVM   Murali Karicheri
  • [U-Boot] [PATCH v3 1/7] ARM: k2g-ice: Add pinmux support for rgmii interface   Murali Karicheri
    • [U-Boot] [PATCH v3 1/7] ARM: k2g-ice: Add pinmux support for rgmii interface   Joe Hershberger
    • [U-Boot] [PATCH v3 1/7] ARM: k2g-ice: Add pinmux support for rgmii interface   Joe Hershberger
  • [U-Boot] [PATCH v3 4/7] ARM: k2g: add a workaround to reset the phy   Murali Karicheri
    • [U-Boot] [PATCH v3 4/7] ARM: k2g: add a workaround to reset the phy   Joe Hershberger
  • [U-Boot] [PATCH v3 5/7] ARM: dts: k2g-evm: remove unused phy-mode property from phy node   Murali Karicheri
    • [U-Boot] [PATCH v3 5/7] ARM: dts: k2g-evm: remove unused phy-mode property from phy node   Joe Hershberger
  • [U-Boot] [PATCH v3 6/7] k2g: config enable ti phy dp83867 for k2g   Murali Karicheri
    • [U-Boot] [PATCH v3 6/7] k2g: config enable ti phy dp83867 for k2g   Tom Rini
    • [U-Boot] [PATCH v3 6/7] k2g: config enable ti phy dp83867 for k2g   Joe Hershberger
  • [U-Boot] [PATCH v3 7/7] ARM: dts: k2g-ice: add dt node for netcp   Murali Karicheri
    • [U-Boot] [PATCH v3 7/7] ARM: dts: k2g-ice: add dt node for netcp   Joe Hershberger
  • [U-Boot] [PATCH v3 0/7] Add netcp networking support on K2G ICE EVM   Murali Karicheri
• [U-Boot] [PATCH v3 2/7] ARM: k2g-gp-evm: update to rgmii pinmux configuration   Murali Karicheri
  • [U-Boot] [PATCH v3 2/7] ARM: k2g-gp-evm: update to rgmii pinmux configuration   Joe Hershberger
• [U-Boot] [PATCH v3 3/7] net: netcp: add support for phy with rgmii ids   Murali Karicheri
  • [U-Boot] [PATCH v3 3/7] net: netcp: add support for phy with rgmii ids   Joe Hershberger
• [U-Boot] [RFT] configs: arndale: Use appropriate driver for Asix AX88760   Krzysztof Kozlowski
  • [U-Boot] [RFT] configs: arndale: Use appropriate driver for Asix AX88760   Lukasz Majewski
• [U-Boot] [PATCH v2 0/8] arm: socfpga: implement proper peripheral reset handling   Simon Goldschmidt
  • [U-Boot] [PATCH v2 1/8] arm: socfpga: gen5: sync devicetrees to Linux   Simon Goldschmidt
    • [U-Boot] [PATCH v2 1/8] arm: socfpga: gen5: sync devicetrees to Linux   Marek Vasut
      • [U-Boot] [PATCH v2 1/8] arm: socfpga: gen5: sync devicetrees to Linux   Simon Goldschmidt
      • [U-Boot] [PATCH v2 1/8] arm: socfpga: gen5: sync devicetrees to Linux   Marek Vasut
  • [U-Boot] [PATCH v2 2/8] arm: socfpga: gen5: add reset & sdr node to SPL devicetrees   Simon Goldschmidt
    • [U-Boot] [PATCH v2 2/8] arm: socfpga: gen5: add reset & sdr node to SPL devicetrees   Marek Vasut
      • [U-Boot] [PATCH v2 2/8] arm: socfpga: gen5: add reset & sdr node to SPL devicetrees   Simon Goldschmidt
      • [U-Boot] [PATCH v2 2/8] arm: socfpga: gen5: add reset & sdr node to SPL devicetrees   Marek Vasut
      • [U-Boot] [PATCH v2 2/8] arm: socfpga: gen5: add reset & sdr node to SPL devicetrees   Simon Goldschmidt
      • [U-Boot] [PATCH v2 2/8] arm: socfpga: gen5: add reset & sdr node to SPL devicetrees   Marek Vasut
      • [U-Boot] [PATCH v2 2/8] arm: socfpga: gen5: add reset & sdr node to SPL devicetrees   Simon Goldschmidt
      • [U-Boot] [PATCH v2 2/8] arm: socfpga: gen5: add reset & sdr node to SPL devicetrees   Marek Vasut
      • [U-Boot] [PATCH v2 2/8] arm: socfpga: gen5: add reset & sdr node to SPL devicetrees   Simon Goldschmidt
      • [U-Boot] [PATCH v2 2/8] arm: socfpga: gen5: add reset & sdr node to SPL devicetrees   Marek Vasut
      • [U-Boot] [PATCH v2 2/8] arm: socfpga: gen5: add reset & sdr node to SPL devicetrees   Simon Goldschmidt
      • [U-Boot] [PATCH v2 2/8] arm: socfpga: gen5: add reset & sdr node to SPL devicetrees   Marek Vasut
  • [U-Boot] [PATCH v2 3/8] arm: socfpga: move gen5 SDR driver to DM   Simon Goldschmidt
  • [U-Boot] [PATCH v2 4/8] mtd: rawnand: denali: add reset handling   Simon Goldschmidt
  • [U-Boot] [PATCH v2 5/8] spi: cadence_qspi: add reset handling   Simon Goldschmidt
    • [U-Boot] [PATCH v2 5/8] spi: cadence_qspi: add reset handling   Marek Vasut
      • [U-Boot] [PATCH v2 5/8] spi: cadence_qspi: add reset handling   Simon Goldschmidt
      • [U-Boot] [PATCH v2 5/8] spi: cadence_qspi: add reset handling   Marek Vasut
      • [U-Boot] [PATCH v2 5/8] spi: cadence_qspi: add reset handling   Simon Goldschmidt
      • [U-Boot] [PATCH v2 5/8] spi: cadence_qspi: add reset handling   Marek Vasut
  • [U-Boot] [PATCH v2 6/8] reset: socfpga: add reset handling for old kernels   Simon Goldschmidt
    • [U-Boot] [PATCH v2 6/8] reset: socfpga: add reset handling for old kernels   Marek Vasut
      • [U-Boot] [PATCH v2 6/8] reset: socfpga: add reset handling for old kernels   Simon Goldschmidt
      • [U-Boot] [PATCH v2 6/8] reset: socfpga: add reset handling for old kernels   Marek Vasut
      • [U-Boot] [PATCH v2 6/8] reset: socfpga: add reset handling for old kernels   Simon Goldschmidt
  • [U-Boot] [PATCH v2 7/8] arm: socfpga: gen5: deassert peripheral reset by default   Simon Goldschmidt
    • [U-Boot] [PATCH v2 7/8] arm: socfpga: gen5: deassert peripheral reset by default   Marek Vasut
      • [U-Boot] [PATCH v2 7/8] arm: socfpga: gen5: deassert peripheral reset by default   Simon Goldschmidt
      • [U-Boot] [PATCH v2 7/8] arm: socfpga: gen5: deassert peripheral reset by default   Marek Vasut
      • [U-Boot] [PATCH v2 7/8] arm: socfpga: gen5: deassert peripheral reset by default   Simon Goldschmidt
      • [U-Boot] [PATCH v2 7/8] arm: socfpga: gen5: deassert peripheral reset by default   Marek Vasut
  • [U-Boot] [PATCH v2 8/8] arm: socfpga: implement proper peripheral reset   Simon Goldschmidt
    • [U-Boot] [PATCH v2 8/8] arm: socfpga: implement proper peripheral reset   Marek Vasut
      • [U-Boot] [PATCH v2 8/8] arm: socfpga: implement proper peripheral reset   Simon Goldschmidt
      • [U-Boot] [PATCH v2 8/8] arm: socfpga: implement proper peripheral reset   Marek Vasut
      • [U-Boot] [PATCH v2 8/8] arm: socfpga: implement proper peripheral reset   Simon Goldschmidt
      • [U-Boot] [PATCH v2 8/8] arm: socfpga: implement proper peripheral reset   Marek Vasut
      • [U-Boot] [PATCH v2 8/8] arm: socfpga: implement proper peripheral reset   Simon Goldschmidt
      • [U-Boot] [PATCH v2 8/8] arm: socfpga: implement proper peripheral reset   Marek Vasut
      • [U-Boot] [PATCH v2 8/8] arm: socfpga: implement proper peripheral reset   Simon Goldschmidt
      • [U-Boot] [PATCH v2 8/8] arm: socfpga: implement proper peripheral reset   Marek Vasut
      • [U-Boot] [PATCH v2 8/8] arm: socfpga: implement proper peripheral reset   Simon Goldschmidt
• [U-Boot] [PATCH v2 0/7] AM65x HS device support   Andrew F. Davis
  • [U-Boot] [PATCH v2 1/7] arm: K3: Avoid use of MCU_PSRAM0 before SYSFW is loaded   Andrew F. Davis
    • [U-Boot] [PATCH v2 1/7] arm: K3: Avoid use of MCU_PSRAM0 before SYSFW is loaded   Tom Rini
  • [U-Boot] [PATCH v2 2/7] firmware: ti_sci: Add support for firewall management   Andrew F. Davis
  • [U-Boot] [PATCH v2 3/7] firmware: ti_sci: Modify auth_boot TI-SCI API to match new version   Andrew F. Davis
  • [U-Boot] [PATCH v2 4/7] arm: mach-k3: Add secure device support   Andrew F. Davis
  • [U-Boot] [PATCH v2 5/7] arm: mach-k3: Add secure device build support   Andrew F. Davis
  • [U-Boot] [PATCH v2 6/7] configs: Add a config for AM65x High Security EVM   Andrew F. Davis
  • [U-Boot] [PATCH v2 7/7] doc: Update info on using K3 secure devices   Andrew F. Davis
• [U-Boot] ut dm pch sandbox test failures   Stephen Warren
  • [U-Boot] ut dm pch sandbox test failures   Stephen Warren
    • [U-Boot] ut dm pch sandbox test failures   Stephen Warren
      • [U-Boot] ut dm pch sandbox test failures   Tom Rini
• [U-Boot] SiFive FU540 U-Boot patches,   Rick Chen
  • [U-Boot] SiFive FU540 U-Boot patches,   Rick Chen
    • [U-Boot] SiFive FU540 U-Boot patches,   Anup Patel
      • [U-Boot] SiFive FU540 U-Boot patches,   Rick Chen
      • [U-Boot] SiFive FU540 U-Boot patches,   Anup Patel
      • [U-Boot] SiFive FU540 U-Boot patches,   Anup Patel
      • [U-Boot] SiFive FU540 U-Boot patches,   Rick Chen
• [U-Boot] [PATCH] am57xx_evm_defconfig: Enable configs to support QSPI boot   Vignesh R
  • [U-Boot] [PATCH] am57xx_evm_defconfig: Enable configs to support QSPI boot   Tom Rini
• [U-Boot] [PATCH 01/40] binman: Don't generate an error in 'text' entry constructor   Bin Meng
• [U-Boot] [PATCH 02/40] binman: Don't show image-skip message by default   Bin Meng
• [U-Boot] [PATCH 03/40] binman: Add a missing comment in Entry_vblock   Bin Meng
• [U-Boot] [PATCH 04/40] dm: core: Fix translate condition in ofnode_get_addr_size()   Bin Meng
• [U-Boot] [PATCH 05/40] cros_ec: Use a hyphen in the uclass name   Bin Meng
• [U-Boot] [PATCH 06/40] spl: Allow sandbox to build a device-tree file   Bin Meng
• [U-Boot] [PATCH 07/40] RFC: binman: Allow sections to have an offset   Bin Meng
• [U-Boot] [PATCH 08/40] x86: start64: Fix copyright message   Bin Meng
• [U-Boot] [PATCH 09/40] x86: mp_init: Use proper error numbers   Bin Meng
• [U-Boot] [PATCH 10/40] x86: Add a way to reinit the cpu   Bin Meng
• [U-Boot] [PATCH 11/40] x86: dts: Add device-tree labels for rtc and reset   Bin Meng
• [U-Boot] [PATCH 12/40] x86: Update a stale comment about ifdtool   Bin Meng
• [U-Boot] [PATCH 13/40] x86: Support SPL and TPL   Bin Meng
• [U-Boot] [PATCH 14/40] x86: Support booting with TPL   Bin Meng
• [U-Boot] [PATCH 15/40] x86: Add a handoff header file   Bin Meng
• [U-Boot] [PATCH 16/40] x86: broadwell: Improve SDRAM debugging output   Bin Meng
• [U-Boot] [PATCH 17/40] x86: broadwell: Allow SDRAM init from SPL   Bin Meng
• [U-Boot] [PATCH 18/40] x86: Move init of debug UART to cpu.c   Bin Meng
• [U-Boot] [PATCH 19/40] x86: broadwell: Split CPU init   Bin Meng
• [U-Boot] [PATCH 20/40] x86: Add support for starting from SPL/TPL   Bin Meng
• [U-Boot] [PATCH 21/40] x86: Allow 16-bit init to be in TPL   Bin Meng
• [U-Boot] [PATCH 22/40] x86: broadwell: Allow booting from SPL   Bin Meng
• [U-Boot] [PATCH 23/40] x86: broadwell: Select refcode and CPU code for SPL   Bin Meng
• [U-Boot] [PATCH 24/40] x86: Add common Intel code for SPL   Bin Meng
• [U-Boot] [PATCH 25/40] x86: Support saving MRC data from SPL   Bin Meng
• [U-Boot] [PATCH 26/40] x86: Add a simple TPL implementations   Bin Meng
• [U-Boot] [PATCH 27/40] x86: mrccache: Add more debugging   Bin Meng
• [U-Boot] [PATCH 28/40] x86: Add a sysreset driver for the Intel PCH   Bin Meng
• [U-Boot] [PATCH 29/40] x86: Support TPL in Intel common code   Bin Meng
• [U-Boot] [PATCH 30/40] x86: Don't set up MTRRs in SPL   Bin Meng
• [U-Boot] [PATCH 31/40] x86: Don't generate a bootstage report in SPL   Bin Meng
• [U-Boot] [PATCH 32/40] x86: Support PCI VGA ROM when TPL is used   Bin Meng
• [U-Boot] [PATCH 33/40] x86: sysreset: Implement the get_last() method   Bin Meng
• [U-Boot] [PATCH 34/40] x86: Add documention on the samus flashmap   Bin Meng
• [U-Boot] [PATCH 35/40] x86: samus: Update device tree for SPL   Bin Meng
• [U-Boot] [PATCH 36/40] x86: samus: Update device tree for verified boot   Bin Meng
• [U-Boot] [PATCH 37/40] x86: Update device tree for TPL   Bin Meng
• [U-Boot] [PATCH 38/40] x86: Update device tree for Chromium OS verified boot   Bin Meng
• [U-Boot] [PATCH 39/40] x86: Fix device-tree indentation   Bin Meng
• [U-Boot] [PATCH 40/40] x86: samus: Add a target to boot through TPL   Bin Meng
• [U-Boot] [PATCH v8 0/8] cmd: add efidebug for efi environment   AKASHI Takahiro
  • [U-Boot] [PATCH v8 1/8] cmd: env: add "-e" option for handling UEFI variables   AKASHI Takahiro
  • [U-Boot] [PATCH v8 2/8] efi_loader: define load option attributes   AKASHI Takahiro
  • [U-Boot] [PATCH v8 3/8] cmd: add efidebug command   AKASHI Takahiro
    • [U-Boot] [PATCH v8 3/8] cmd: add efidebug command   Heinrich Schuchardt
    • [U-Boot] [PATCH v8 3/8] cmd: add efidebug command   Heinrich Schuchardt
  • [U-Boot] [PATCH v8 4/8] cmd: efidebug: add devices command   AKASHI Takahiro
    • [U-Boot] [PATCH v8 4/8] cmd: efidebug: add devices command   Heinrich Schuchardt
      • [U-Boot] [PATCH v8 4/8] cmd: efidebug: add devices command   AKASHI Takahiro
  • [U-Boot] [PATCH v8 5/8] cmd: efidebug: add drivers command   AKASHI Takahiro
  • [U-Boot] [PATCH v8 6/8] cmd: efidebug: add dh command   AKASHI Takahiro
  • [U-Boot] [PATCH v8 7/8] cmd: efidebug: add images command   AKASHI Takahiro
  • [U-Boot] [PATCH v8 8/8] cmd: efidebug: add memmap command   AKASHI Takahiro
• [U-Boot] [PATCH] Support boot Android image without address on bootm command   Shawn Guo
  • [U-Boot] [PATCH] Support boot Android image without address on bootm command   Tom Rini
• [U-Boot] [PATCH] dm: Also remove interrupts property from SPL DT   Michal Simek
• [U-Boot] [PATCH 1/2] configs: stm32f746-disco: update EXTRA_ENV_SETTINGS   Patrice Chotard
  • [U-Boot] [PATCH 2/2] configs: stm32f746-disco: enable CONFIG_DISTRO_DEFAULTS   Patrice Chotard
• [U-Boot] [PATCH v2] cmd: clk: Handle ENODEV from clk_get_rate   Ismael Luceno Cortes
  • [U-Boot] [PATCH v2] cmd: clk: Handle ENODEV from clk_get_rate   Matthias Brugger
• [U-Boot] [PATCH v1 0/9] Synchronize DT with v4.20 kernel for STM32F4/F7 and H7 boards   Patrice Chotard
  • [U-Boot] [PATCH v1 3/9] ARM: dts: stm32: Migrate U-boot nodes to U-boot DT files for stm32f7   Patrice Chotard
  • [U-Boot] [PATCH v1 4/9] ARM: dts: stm32: Sync DT with v4.20 kernel for stm32f7   Patrice Chotard
  • [U-Boot] [PATCH v1 5/9] ARM: dts: Migrate U-boot nodes to U-boot DT files for stm32h7   Patrice Chotard
  • [U-Boot] [PATCH v1 6/9] ARM: dts: stm32: Sync DT with v4.20 kernel for stm32h7   Patrice Chotard
  • [U-Boot] [PATCH v1 7/9] ARM: dts: stm32: Restore old usart1 clock bindings for stm32f7   Patrice Chotard
  • [U-Boot] [PATCH v1 8/9] pinctrl: stm32: Add st, stm32f769-pinctrl compatible string   Patrice Chotard
  • [U-Boot] [PATCH v1 9/9] mmc: arm_pl180_mmci: Sync compatible with kernel   Patrice Chotard
• [U-Boot] [PATCH v1 1/9] ARM:dts: stm32: sort nodes by alphabetical order in f4 u-boot files   Patrice Chotard
• [U-Boot] [PATCH v1 2/9] ARM: dts: stm32: Sync DT files with v4.20 kernel for stm32f4   Patrice Chotard
• [U-Boot] [PATCH 1/2] configs: stm32f746-disco: Enable SPI_FLASH_MACRONIX   Patrice Chotard
  • [U-Boot] [PATCH 2/2] board: stm32f746-disco: Get MII/RMII phy_mode from DT   Patrice Chotard
• [U-Boot] [PATCH v3] cmd: clk: Handle ENODEV from clk_get_rate   Ismael Luceno Cortes
• [U-Boot] [PATCH v2 1/3] Add support for the MT41K128M16JT125K memory modules   Martyn Welch
  • [U-Boot] [PATCH v2 3/3] am335x, guardian: Add support for the bosch guardian board   Martyn Welch
    • [U-Boot] [PATCH v2 3/3] am335x, guardian: Add support for the bosch guardian board   Tom Rini
    • [U-Boot] [PATCH v2 3/3] am335x, guardian: Add support for the bosch guardian board   LTEC AG
    • [U-Boot] [PATCH v2 3/3] am335x, guardian: Add support for the bosch guardian board   Felix Brack
• [U-Boot] [PATCH v2 2/3] env: Don't check CONFIG_ENV_OFFSET_REDUND for SPL build   Martyn Welch
  • [U-Boot] [PATCH v2 2/3] env: Don't check CONFIG_ENV_OFFSET_REDUND for SPL build   Tom Rini
• [U-Boot] [RFC 00/22] Add support for Cavium Octeon-TX CN80XX/CN81XX   Tim Harvey
  • [U-Boot] [RFC 01/22] arm: introduce ARCH_THUNDERX   Tim Harvey
    • [U-Boot] [RFC 01/22] arm: introduce ARCH_THUNDERX   Alexander Graf
    • [U-Boot] [RFC 01/22] arm: introduce ARCH_THUNDERX   Alexander Graf
  • [U-Boot] [RFC 02/22] arm: add thunderx_81xx   Tim Harvey
    • [U-Boot] [RFC 02/22] arm: add thunderx_81xx   Alexander Graf
  • [U-Boot] [RFC 03/22] thunderx: add FDT support   Tim Harvey
    • [U-Boot] [RFC 03/22] thunderx: add FDT support   Alexander Graf
  • [U-Boot] [RFC 04/22] thunderx: add thunderx register definitions and misc functions   Tim Harvey
    • [U-Boot] [RFC 04/22] thunderx: add thunderx register definitions and misc functions   Alexander Graf
  • [U-Boot] [RFC 05/22] thunderx: move DRAM prints to debug   Tim Harvey
  • [U-Boot] [RFC 06/22] dm: pci: add PCI SR-IOV EA support   Tim Harvey
  • [U-Boot] [RFC 07/22] fdt: add fdtdec_get_pci_bus_range   Tim Harvey
  • [U-Boot] [RFC 08/22] pci: add thunderx pci/ecam driver   Tim Harvey
  • [U-Boot] [RFC 09/22] pci: fix pce enumeration on thunderx   Tim Harvey
  • [U-Boot] [RFC 10/22] arm: include 64bit io accessors   Tim Harvey
  • [U-Boot] [RFC 11/22] gpio: add thunderx gpio driver   Tim Harvey
  • [U-Boot] [RFC 12/22] i2c: add thunderx I2C driver   Tim Harvey
  • [U-Boot] [RFC 13/22] spi: add thunderx SPI driver   Tim Harvey
  • [U-Boot] [RFC 14/22] xhci: add support for cavium thunderx XHCI   Tim Harvey
  • [U-Boot] [RFC 15/22] thunderx_81xx: add support for XHCI   Tim Harvey
  • [U-Boot] [RFC 16/22] thunderx_81xx: enable usb mass storage and usb ethernet   Tim Harvey
  • [U-Boot] [RFC 17/22] ahci: support 64bit systems   Tim Harvey
  • [U-Boot] [RFC 18/22] ahci: set n_ports from host caps   Tim Harvey
  • [U-Boot] [RFC 19/22] ahci: add support for ThunderX AHCI   Tim Harvey
  • [U-Boot] [RFC 20/22] thunderx_81xx: add AHCI support   Tim Harvey
  • [U-Boot] [RFC 21/22] net: add thunderx vnic drivers   Tim Harvey
  • [U-Boot] [RFC 22/22] pci: auto probe thunderx NIC devices   Tim Harvey
• [U-Boot] [PATCH 1/4] arm: exynos: arndale: Replace Chander Kashyap inactive maintainer   Krzysztof Kozlowski
  • [U-Boot] [PATCH 2/4] configs: odroid_xu3: Use consistent syntax for #include   Krzysztof Kozlowski
    • [U-Boot] [PATCH 2/4] configs: odroid_xu3: Use consistent syntax for #include   Lukasz Majewski
  • [U-Boot] [PATCH 3/4] configs: odroid_xu3: Unify indentation   Krzysztof Kozlowski
    • [U-Boot] [PATCH 3/4] configs: odroid_xu3: Unify indentation   Lukasz Majewski
  • [U-Boot] [PATCH 4/4] arm: exynos: Remove duplicated "boardname" env setting   Krzysztof Kozlowski
    • [U-Boot] [PATCH 4/4] arm: exynos: Remove duplicated "boardname" env setting   Lukasz Majewski
  • [U-Boot] [PATCH 1/4] arm: exynos: arndale: Replace Chander Kashyap inactive maintainer   Lukasz Majewski
• [U-Boot] [RFC PATCH 1/1] spi: Kconfig: change dependency order   Tom Rini
• [U-Boot] [PATCH] imx: mx6qsabrelite: Update the SabreLite README   Martyn Welch
  • [U-Boot] [PATCH] imx: mx6qsabrelite: Update the SabreLite README   Troy Kisky
• [U-Boot] [PATCH 1/1] efi_loader: do not add \ in efi_fs_from_name()   Heinrich Schuchardt
  • [U-Boot] [PATCH 1/1] efi_loader: do not add \ in efi_fs_from_name()   Alexander Graf
    • [U-Boot] [PATCH 1/1] efi_loader: do not add \ in efi_fs_from_name()   Heinrich Schuchardt
      • [U-Boot] [PATCH 1/1] efi_loader: do not add \ in efi_fs_from_name()   Alexander Graf
• [U-Boot] cmd: Kconfig: LED command depends on LED subsystems   Tom Rini
• [U-Boot] FEC and EFI Simple Network   Alexander Graf
  • [U-Boot] FEC and EFI Simple Network   Heinrich Schuchardt
• [U-Boot] [PATCH v2 0/6] Add support for MT8516 SoCs   Fabien Parent
  • [U-Boot] [PATCH v2 1/6] mmc: mtk-sd: add source_cg clock support   Fabien Parent
  • [U-Boot] [PATCH v2 2/6] mmc: mtk-sd: add support for MT8516   Fabien Parent
  • [U-Boot] [PATCH v2 3/6] clk: mediatek: add support for SETCLR_INV and NO_SETCLR flags   Fabien Parent
  • [U-Boot] [PATCH v2 4/6] clk: mediatek: add driver for MT8516   Fabien Parent
  • [U-Boot] [PATCH v2 5/6] pinctrl: add driver for MT8516   Fabien Parent
  • [U-Boot] [PATCH v2 6/6] ARM: MediaTek: Add support for MT8516 SoC   Fabien Parent
    • [U-Boot] [PATCH v2 6/6] ARM: MediaTek: Add support for MT8516 SoC   Tom Rini
• [U-Boot] [PATCH 1/1] efi_loader: error message if BootOrder not defined   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: fix entry count in bootmgr   Heinrich Schuchardt
• [U-Boot] [PATCH 07/10] clk: imx8: add i.MX8QM clk driver   Peng Fan
• [U-Boot] [PATCH] ARM: Odroid XU3: Enable driver I2C support for OdroidXU3   Anand Moon
  • [U-Boot] [PATCH] ARM: Odroid XU3: Enable driver I2C support for OdroidXU3   Lukasz Majewski
  • [U-Boot] [PATCH] ARM: Odroid XU3: Enable driver I2C support for OdroidXU3   Krzysztof Kozlowski
• [U-Boot] [PATCH] configs: Migrate USB_MUSB_DISABLE_BULK_COMBINE_SPLIT to Kconfig   Alex Kiernan
• [U-Boot] [PATCH 1/2] imx8mq_evk/README: fix DDR training firmware path   Baruch Siach
  • [U-Boot] [PATCH 1/2] imx8mq_evk/README: fix DDR training firmware path   Fabio Estevam
• [U-Boot] [PATCH 2/2] imx8mq_evk/README: add missing firmware extract step   Baruch Siach
  • [U-Boot] [PATCH 2/2] imx8mq_evk/README: add missing firmware extract step   Fabio Estevam
    • [U-Boot] [PATCH 2/2] imx8mq_evk/README: add missing firmware extract step   Baruch Siach
      • [U-Boot] [PATCH 2/2] imx8mq_evk/README: add missing firmware extract step   Fabio Estevam
• [U-Boot] [RFC] efi_loader: memory type in device path allocation   AKASHI Takahiro
• [U-Boot] [PATCH v9 0/8] cmd: add efidebug for efi environment   AKASHI Takahiro
  • [U-Boot] [PATCH v9 1/8] cmd: env: add "-e" option for handling UEFI variables   AKASHI Takahiro
  • [U-Boot] [PATCH v9 2/8] efi_loader: define load option attributes   AKASHI Takahiro
  • [U-Boot] [PATCH v9 3/8] cmd: add efidebug command   AKASHI Takahiro
  • [U-Boot] [PATCH v9 4/8] cmd: efidebug: add devices command   AKASHI Takahiro
  • [U-Boot] [PATCH v9 5/8] cmd: efidebug: add drivers command   AKASHI Takahiro
  • [U-Boot] [PATCH v9 6/8] cmd: efidebug: add dh command   AKASHI Takahiro
  • [U-Boot] [PATCH v9 7/8] cmd: efidebug: add images command   AKASHI Takahiro
  • [U-Boot] [PATCH v9 8/8] cmd: efidebug: add memmap command   AKASHI Takahiro
• [U-Boot] [PATCH v10 00/15] SiFive FU540 Support   Anup Patel
  • [U-Boot] [PATCH v10 01/15] riscv: Enable create symlink using kconfig   Anup Patel
  • [U-Boot] [PATCH v10 02/15] riscv: Rename cpu/qemu to cpu/generic   Anup Patel
  • [U-Boot] [PATCH v10 03/15] riscv: Add asm/dma-mapping.h for DMA mappings   Anup Patel
  • [U-Boot] [PATCH v10 04/15] riscv: Add place-holder asm/arch/clk.h for driver compilation   Anup Patel
  • [U-Boot] [PATCH v10 05/15] riscv: generic: Ensure that U-Boot runs within 4GB for 64bit systems   Anup Patel
  • [U-Boot] [PATCH v10 06/15] net: macb: Fix clk API usage for RISC-V systems   Anup Patel
  • [U-Boot] [PATCH v10 07/15] net: macb: Fix GEM hardware detection   Anup Patel
  • [U-Boot] [PATCH v10 08/15] clk: Add SiFive FU540 PRCI clock driver   Anup Patel
  • [U-Boot] [PATCH v10 09/15] clk: Add fixed-factor clock driver   Anup Patel
  • [U-Boot] [PATCH v10 10/15] drivers: serial_sifive: Fix baud rate calculation   Anup Patel
  • [U-Boot] [PATCH v10 11/15] drivers: serial_sifive: Skip baudrate config if no input clock   Anup Patel
  • [U-Boot] [PATCH v10 12/15] cpu: Bind timer driver for boot hart   Anup Patel
  • [U-Boot] [PATCH v10 13/15] riscv: Add SiFive FU540 board support   Anup Patel
  • [U-Boot] [PATCH v10 14/15] doc: Add a readme guide for SiFive FU540   Anup Patel
  • [U-Boot] [PATCH v10 15/15] riscv: Enable CONFIG_SYS_BOOT_RAMDISK_HIGH for using initrd   Anup Patel
• [U-Boot] [PATCH] arm64: zynqmp: Remove eeprom setting   Michal Simek
• [U-Boot] rpi: bcm2835_sdhost: occasional errors while writing   Zubair Lutfullah Kakakhel
• [U-Boot] [PATCH] spi: designware: Change include order   Horatiu.Vultur at microchip.com
• [U-Boot] [PATCH v2 0/2] Update pinctrl-uclass   Patrice Chotard
  • [U-Boot] [PATCH v2 1/2] dm: pinctrl: Avoid race condition on probe for UCLASS_PINCTRL   Patrice Chotard
  • [U-Boot] [PATCH v2 2/2] dm: pinctrl: Skip gpio-controller node in pinconfig_post_bind()   Patrice Chotard
• [U-Boot] i.MX6 Code Consolidation suggestion/question   Adam Ford
  • [U-Boot] i.MX6 Code Consolidation suggestion/question   Fabio Estevam
• [U-Boot] [PATCH v2] arm: fix hvc call   Alexander Graf
  • [U-Boot] [PATCH v2] arm: fix hvc call   Ibai Erkiaga
• [U-Boot] [PATCH v3 1/3] Add support for the MT41K128M16JT125K memory modules   Martyn Welch
• [U-Boot] [PATCH v3 2/3] env: Don't check CONFIG_ENV_OFFSET_REDUND for SPL build   Martyn Welch
• [U-Boot] [PATCH v3 3/3] am335x, guardian: Add support for the bosch guardian board   Martyn Welch
  • [U-Boot] [PATCH v3 3/3] am335x, guardian: Add support for the bosch guardian board   Felix Brack
• [U-Boot] [PATCH 0/3] ARC: DM_MMC migration   Eugeniy Paltsev
  • [U-Boot] [PATCH 1/3] ARC: dwmmc: Adding DesignWare MMC driver support for ARC devboards   Eugeniy Paltsev
  • [U-Boot] [PATCH 2/3] ARC: [plat-hsdk]: migrate to DM_MMC   Eugeniy Paltsev
  • [U-Boot] [PATCH 3/3] ARC: [plat-axs10x]: migrate to DM_MMC   Eugeniy Paltsev
• [U-Boot] [PATCH] arm: pdu001: Fix order of include files   Felix Brack
  • [U-Boot] arm: pdu001: Fix order of include files   Tom Rini
• [U-Boot] [BUG] cb8af8af5ba0 "fs: fat: support write with non-zero offset" leads to link error   Heinrich Schuchardt
• [U-Boot] U-Boot pull request for EFI subsystem in v2019.04-rc3   Heinrich Schuchardt
  • [U-Boot] U-Boot pull request for EFI subsystem in v2019.04-rc3   Tom Rini
• [U-Boot] [PATCH 1/1] fs: fat: fix link error when building with DEBUG=1   Heinrich Schuchardt
  • [U-Boot] [U-Boot, 1/1] fs: fat: fix link error when building with DEBUG=1   Tom Rini
• [U-Boot] [PATCH v4 0/7] Add netcp networking support on K2G ICE EVM   Murali Karicheri
  • [U-Boot] [PATCH v4 1/7] ARM: k2g-gp-evm: update to rgmii pinmux configuration   Murali Karicheri
    • [U-Boot] [PATCH v4 1/7] ARM: k2g-gp-evm: update to rgmii pinmux configuration   Joe Hershberger
  • [U-Boot] [PATCH v4 2/7] ARM: k2g-ice: Add pinmux support for rgmii interface   Murali Karicheri
  • [U-Boot] [PATCH v4 3/7] net: netcp: add support for phy with rgmii ids   Murali Karicheri
  • [U-Boot] [PATCH v4 4/7] ARM: k2g: add a workaround to reset the phy   Murali Karicheri
  • [U-Boot] [PATCH v4 5/7] ARM: dts: k2g-evm: remove unused phy-mode property from phy node   Murali Karicheri
  • [U-Boot] [PATCH v4 6/7] k2g: config enable ti phy dp83867 for k2g   Murali Karicheri
  • [U-Boot] [PATCH v4 7/7] ARM: dts: k2g-ice: add dt node for netcp   Murali Karicheri
  • [U-Boot] [PATCH v4 0/7] Add netcp networking support on K2G ICE EVM   Murali Karicheri
    • [U-Boot] [PATCH v4 0/7] Add netcp networking support on K2G ICE EVM   Joe Hershberger
• [U-Boot] [PATCH V3 1/2] davinci: da850evm/omapl138-lcdk: Move BSS to SDRAM because SRAM is full   Adam Ford
  • [U-Boot] [PATCH V3 2/2] ARM: davinci: da850evm: Enable SPL_OF_CONTROL without PLATDATA   Adam Ford
• [U-Boot] [PATCH] spi: cadence_qspi: Add quad write support   Ley Foon Tan
  • [U-Boot] [PATCH] spi: cadence_qspi: Add quad write support   Vignesh R
    • [U-Boot] [PATCH] spi: cadence_qspi: Add quad write support   Ley Foon Tan
• [U-Boot] [PATCH 01/12] nxp: ls1088a: fix dppa exit when using efi boot   Ashish Kumar
• [U-Boot] [PATCH 12/12] nxp: ls1043a: use default scan_dev_for_boot   Ashish Kumar
• [U-Boot] [PATCH] dm: check OF_LIVE is enabled   Ibai Erkiaga
• [U-Boot] [PATCH] usb: udc-uclass: Fixed problem when no alias is defined in DT   Vignesh R
  • [U-Boot] [PATCH] usb: udc-uclass: Fixed problem when no alias is defined in DT   Lukasz Majewski
• [U-Boot] [PATCH 1/4] x86: Make sure i8254 is setup correctly before generating beeps   Bin Meng
  • [U-Boot] [PATCH 2/4] x86: Add a dtsi file for the pc speaker   Bin Meng
  • [U-Boot] [PATCH 3/4] x86: coreboot: Add the missing pc speaker node in the device tree   Bin Meng
  • [U-Boot] [PATCH 4/4] x86: crownbay: Enable the beeper sound driver   Bin Meng
• [U-Boot] [PATCH v2 1/3] fsl_sec: fix register layout on Layerscape architectures   laurentiu.tudor at nxp.com
  • [U-Boot] [PATCH v2 2/3] armv8: fsl-layerscape: fix SEC QI ICID setup   laurentiu.tudor at nxp.com
  • [U-Boot] [PATCH v2 3/3] armv8: fsl-layerscape: avoid DT fixup warning   laurentiu.tudor at nxp.com
• [U-Boot] [PATCH v1 1/2] x86: edison: Use proper number of serial interface   Andy Shevchenko
  • [U-Boot] [PATCH v1 1/2] x86: edison: Use proper number of serial interface   Bin Meng
• [U-Boot] [PATCH v1 2/2] x86: edison: Add the rest of UARTs present on board   Andy Shevchenko
  • [U-Boot] [PATCH v1 2/2] x86: edison: Add the rest of UARTs present on board   Bin Meng
• [U-Boot] [PATCH v1 1/2] x86: acpi: Add DMA descriptors for SPI5 on Intel Tangier   Andy Shevchenko
  • [U-Boot] [PATCH v1 2/2] x86: acpi: Add DMA descriptors for I2C1 on Intel Tangier   Andy Shevchenko
    • [U-Boot] [PATCH v1 2/2] x86: acpi: Add DMA descriptors for I2C1 on Intel Tangier   Bin Meng
  • [U-Boot] [PATCH v1 1/2] x86: acpi: Add DMA descriptors for SPI5 on Intel Tangier   Bin Meng
• [U-Boot] [PATCH] efi_loader: Fix serial console size detection   matthias.bgg at kernel.org
  • [U-Boot] [PATCH] efi_loader: Fix serial console size detection   Heinrich Schuchardt
    • [U-Boot] [PATCH] efi_loader: Fix serial console size detection   Matthias Brugger
      • [U-Boot] [PATCH] efi_loader: Fix serial console size detection   Heinrich Schuchardt
• [U-Boot] [PATCH] doc: binding: rename directory ram to memory-controller   Patrick Delaunay
  • [U-Boot] doc: binding: rename directory ram to memory-controller   Tom Rini
• [U-Boot] [PATCH] net: phy: Fix return value check phy_probe   Michal Simek
• [U-Boot] [PATCH] net: phy: Reloc next and prev pointers inside phy_drivers   Michal Simek
• [U-Boot] [PATCH 1/2] mx6sabresd: README: Adjust the binary name after DM conversion   Fabio Estevam
  • [U-Boot] [PATCH 2/2] mx6sabreauto: README: Adjust the binary name after DM conversion   Fabio Estevam
    • [U-Boot] [PATCH 2/2] mx6sabreauto: README: Adjust the binary name after DM conversion   Peng Fan
  • [U-Boot] [PATCH 1/2] mx6sabresd: README: Adjust the binary name after DM conversion   Peng Fan
• [U-Boot] [U-BOOT] fs: ext4: Problem with ext4load and sparse files   Gero Schumacher
• [U-Boot] [PATCH] driver: net: fsl-mc: Fix DPC MAC address fixup   Ioana Ciocoi Radulescu
• [U-Boot] [RFC] drivers: serial: Check only input buffers in pending   matthias.bgg at kernel.org
• [U-Boot] [PATCH v2] configs: dra7xx_evm: Remove ENV_IS_IN_FAT   Faiz Abbas
  • [U-Boot] [PATCH v2] configs: dra7xx_evm: Remove ENV_IS_IN_FAT   Lokesh Vutla
  • [U-Boot] [PATCH v2] configs: dra7xx_evm: Remove ENV_IS_IN_FAT   Tom Rini
• [U-Boot] [PATCH v2 1/5] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior   Heinrich Schuchardt
  • [U-Boot] [PATCH v2 1/5] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior   AKASHI Takahiro
    • [U-Boot] [PATCH v2 1/5] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior   Heinrich Schuchardt
      • [U-Boot] [PATCH v2 1/5] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior   AKASHI Takahiro
      • [U-Boot] [PATCH v2 1/5] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior   Heinrich Schuchardt
      • [U-Boot] [PATCH v2 1/5] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior   AKASHI Takahiro
• [U-Boot] Dreamplug fails to detect SPI and USB   Vagrant Cascadian
• [U-Boot] [PATCH v2 5/5] cmd: run: add "-e" option to run an EFI application   Heinrich Schuchardt
  • [U-Boot] [PATCH v2 5/5] cmd: run: add "-e" option to run an EFI application   AKASHI Takahiro
    • [U-Boot] [PATCH v2 5/5] cmd: run: add "-e" option to run an EFI application   Heinrich Schuchardt
      • [U-Boot] [PATCH v2 5/5] cmd: run: add "-e" option to run an EFI application   AKASHI Takahiro
      • [U-Boot] [PATCH v2 5/5] cmd: run: add "-e" option to run an EFI application   Heinrich Schuchardt
      • [U-Boot] [PATCH v2 5/5] cmd: run: add "-e" option to run an EFI application   AKASHI Takahiro
      • [U-Boot] [PATCH v2 5/5] cmd: run: add "-e" option to run an EFI application   Heinrich Schuchardt
      • [U-Boot] [PATCH v2 5/5] cmd: run: add "-e" option to run an EFI application   AKASHI Takahiro
      • [U-Boot] [PATCH v2 5/5] cmd: run: add "-e" option to run an EFI application   Heinrich Schuchardt
  • [U-Boot] [PATCH v2 5/5] cmd: run: add "-e" option to run an EFI application   Heinrich Schuchardt
• [U-Boot] [PATCH 1/2] kbuild: make arch-dtbs target PHONY   Stephen Warren
  • [U-Boot] [PATCH 1/2] kbuild: make arch-dtbs target PHONY   Masahiro Yamada
    • [U-Boot] [PATCH 1/2] kbuild: make arch-dtbs target PHONY   Masahiro Yamada
      • [U-Boot] [PATCH 1/2] kbuild: make arch-dtbs target PHONY   Stephen Warren
  • [U-Boot] [PATCH 1/2] kbuild: make arch-dtbs target PHONY   Masahiro Yamada
  • [U-Boot] [PATCH 1/2] kbuild: make arch-dtbs target PHONY   Stephen Warren
  • [U-Boot] [U-Boot,1/2] kbuild: make arch-dtbs target PHONY   Tom Rini
• [U-Boot] [PATCH 2/2] kbuild: fix DTB .cmd source variable   Stephen Warren
  • [U-Boot] [PATCH 2/2] kbuild: fix DTB .cmd source variable   Masahiro Yamada
  • [U-Boot] [U-Boot,2/2] kbuild: fix DTB .cmd source variable   Tom Rini
• [U-Boot] [PATCH v2 4/5] cmd: bootefi: run an EFI application of a specific load option   Heinrich Schuchardt
  • [U-Boot] [PATCH v2 4/5] cmd: bootefi: run an EFI application of a specific load option   AKASHI Takahiro
    • [U-Boot] [PATCH v2 4/5] cmd: bootefi: run an EFI application of a specific load option   Heinrich Schuchardt
      • [U-Boot] [PATCH v2 4/5] cmd: bootefi: run an EFI application of a specific load option   AKASHI Takahiro
      • [U-Boot] [PATCH v2 4/5] cmd: bootefi: run an EFI application of a specific load option   Heinrich Schuchardt
      • [U-Boot] [PATCH v2 4/5] cmd: bootefi: run an EFI application of a specific load option   AKASHI Takahiro
      • [U-Boot] [PATCH v2 4/5] cmd: bootefi: run an EFI application of a specific load option   Heinrich Schuchardt
• [U-Boot] [PATCH v3 0/8] arm: socfpga: implement proper peripheral reset handling   Simon Goldschmidt
  • [U-Boot] [PATCH v3 1/8] arm: socfpga: gen5: sync devicetrees to Linux   Simon Goldschmidt
  • [U-Boot] [PATCH v3 2/8] arm: socfpga: gen5: add reset & sdr node to SPL devicetrees   Simon Goldschmidt
  • [U-Boot] [PATCH v3 3/8] arm: socfpga: gen5: deassert peripheral reset by default   Simon Goldschmidt
  • [U-Boot] [PATCH v3 4/8] reset: socfpga: add reset handling for old kernels   Simon Goldschmidt
  • [U-Boot] [PATCH v3 5/8] arm: socfpga: move gen5 SDR driver to DM   Simon Goldschmidt
  • [U-Boot] [PATCH v3 6/8] mtd: rawnand: denali: add reset handling   Simon Goldschmidt
  • [U-Boot] [PATCH v3 7/8] spi: cadence_qspi: add reset handling   Simon Goldschmidt
  • [U-Boot] [PATCH v3 8/8] arm: socfpga: implement proper peripheral reset   Simon Goldschmidt
• [U-Boot] [PATCH] spl: add debug print for early malloc usage   Simon Goldschmidt
  • [U-Boot] spl: add debug print for early malloc usage   Tom Rini
• [U-Boot] [PATCH v2] spi: cadence_qspi: Add quad write support   Ley Foon Tan
• [U-Boot] Pull request: u-boot-riscv/master   uboot at andestech.com
  • [U-Boot] Pull request: u-boot-riscv/master   Tom Rini
• [U-Boot] [PATCH v2 0/4] Add Support for NAND in dra71x-evm   Faiz Abbas
  • [U-Boot] [PATCH v2 1/4] board: ti: dra71: Add pinmux settings for NAND on DRA71x EVM   Faiz Abbas
  • [U-Boot] [PATCH v2 2/4] arm: dra7: Allow NAND to be enabled on DRA71x EVM.   Faiz Abbas
  • [U-Boot] [PATCH v2 3/4] configs: dra71x-evm: Add Support for NAND   Faiz Abbas
  • [U-Boot] [PATCH v2 4/4] configs: ti_omap5_common: Add NAND environment settings   Faiz Abbas
    • [U-Boot] [PATCH v2 4/4] configs: ti_omap5_common: Add NAND environment settings   Tom Rini
• [U-Boot] SDCRARD boot on Intel Arria10 SOCDK   Marcel Gielen [Celestia-STS]
• [U-Boot] [PATCH v2] fs: fat: fix reading non-cluster-aligned root directory   Anssi Hannula
• [U-Boot] Commit "ARM: CPU: arm926ejs: Consolidate cache routines to common file" breaks u-boot on Dreamplug   Leigh Brown
  • [U-Boot] Commit "ARM: CPU: arm926ejs: Consolidate cache routines to common file" breaks u-boot on Dreamplug   Adam Ford
    • [U-Boot] Commit "ARM: CPU: arm926ejs: Consolidate cache routines to common file" breaks u-boot on Dreamplug   Leigh Brown
      • [U-Boot] Commit "ARM: CPU: arm926ejs: Consolidate cache routines to common file" breaks u-boot on Dreamplug   Adam Ford
  • [U-Boot] Commit "ARM: CPU: arm926ejs: Consolidate cache routines to common file" breaks u-boot on Dreamplug   Chris Packham
  • [U-Boot] Commit "ARM: CPU: arm926ejs: Consolidate cache routines to common file" breaks u-boot on Dreamplug   Tom Rini
• [U-Boot] U-Boot Digest, Vol 129, Issue 63   Terrance Chiang
• [U-Boot] [PATCH 0/7] Migrate SPI defines to Kconfig   Patrick Delaunay
  • [U-Boot] [PATCH 5/7] Convert CONFIG_SF_DEFAULT_* to Kconfig   Patrick Delaunay
    • [U-Boot] [PATCH 5/7] Convert CONFIG_SF_DEFAULT_* to Kconfig   Simon Goldschmidt
  • [U-Boot] [PATCH 7/7] Convert CONFIG_ENV_SPI_* to Kconfig   Patrick Delaunay
• [U-Boot] [PATCH 1/7] bcm7445: move some configuration in defconfig file   Patrick Delaunay
• [U-Boot] [PATCH 2/7] controlcenterdc: move some configuration in defconfig file   Patrick Delaunay
• [U-Boot] [PATCH 3/7] exynos: replace CONFIG_ENV_SPI_BASE by CONFIG_SYS_SPI_BASE   Patrick Delaunay
• [U-Boot] [PATCH 4/7] tqma6s_wru4_mmc: manage board_spi_cs_gpio correctly   Patrick Delaunay
• [U-Boot] [PATCH 6/7] Convert CONFIG_DEFAULT_SPI_* to Kconfig   Patrick Delaunay
• [U-Boot] [PATCH v3 0/9] spi: Add Allwinner A31 SPI driver   Jagan Teki
  • [U-Boot] [PATCH v3 1/9] spi: sun4i: Poll for rxfifo to be filled up   Jagan Teki
  • [U-Boot] [PATCH v3 2/9] clk: sunxi: Implement SPI clocks, resets   Jagan Teki
  • [U-Boot] [PATCH v3 3/9] spi: sun4i: Simplify reg writes using set/clrbits_le32   Jagan Teki
  • [U-Boot] [PATCH v3 4/9] spi: sun4i: Access registers and bits via enum offsets   Jagan Teki
  • [U-Boot] [PATCH v3 5/9] spi: sun4i: Support fifo_depth via drvdata   Jagan Teki
  • [U-Boot] [PATCH v3 6/9] spi: sun4i: Add CLK support   Jagan Teki
  • [U-Boot] [PATCH v3 7/9] spi: sun4: Add A31 spi controller support   Jagan Teki
  • [U-Boot] [PATCH v3 8/9] spi: sun4i: Driver cleanup   Jagan Teki
  • [U-Boot] [PATCH v3 9/9] spi: Rename sun4i_spi.c into spi-sunxi.c   Jagan Teki
• [U-Boot] [PATCH v4 0/1] Read default speed and mode values from DT   Patrick Delaunay
  • [U-Boot] [PATCH v4] dm: spi: Read default speed and mode values from DT   Patrick Delaunay
• [U-Boot] [PATCH] arm: arm64 32bit address relocation   Ibai Erkiaga
  • [U-Boot] [PATCH] arm: arm64 32bit address relocation   Udit Kumar
    • [U-Boot] [PATCH] arm: arm64 32bit address relocation   Ibai Erkiaga Elorza
• [U-Boot] [PATCH 00/19] stm32mp1: update of stm32mp arch and stm32mp1 board   Patrick Delaunay
  • [U-Boot] [PATCH 04/19] stm32mp1: spl: add spl_display_print   Patrick Delaunay
  • [U-Boot] [PATCH 05/19] stm32mp1: cosmetic cleanup Kconfig   Patrick Delaunay
  • [U-Boot] [PATCH 06/19] stm32mp1: cosmetic: add comment on psci_migrate_info_type return value   Patrick Delaunay
  • [U-Boot] [PATCH 07/19] stm32mp1: spl: hang with trace when DDR init failed   Patrick Delaunay
  • [U-Boot] [PATCH 08/19] stm32mp1: update bootcmd   Patrick Delaunay
  • [U-Boot] [PATCH 09/19] stm32mp1: activate FASTBOOT on eMMC   Patrick Delaunay
  • [U-Boot] [PATCH 10/19] stm32mp1: support forced boot mode   Patrick Delaunay
  • [U-Boot] [PATCH 11/19] stm32mp1: update memory layout   Patrick Delaunay
  • [U-Boot] [PATCH 12/19] stm32mp1: activated some configuration   Patrick Delaunay
  • [U-Boot] [PATCH 13/19] stm32mp1: add some syscon drivers for syscfg and etpzc   Patrick Delaunay
  • [U-Boot] [PATCH 14/19] stm32mp1: add syscfg initialization   Patrick Delaunay
  • [U-Boot] [PATCH 15/19] stm32mp1: align serial number on bootrom   Patrick Delaunay
  • [U-Boot] [PATCH 16/19] stm32mp1: basic boot: SPL enable access to GPIOZ bank   Patrick Delaunay
  • [U-Boot] [PATCH 17/19] stm32mp1: bsec: use device tree new compatible   Patrick Delaunay
  • [U-Boot] [PATCH 18/19] stm32mp1: bsec: shadow all the upper OTP (no secure) during boot   Patrick Delaunay
  • [U-Boot] [PATCH 19/19] stm32mp1: Replace OTP read by SHADOW read   Patrick Delaunay
• [U-Boot] [PATCH 01/19] stm32mp1: add runtime information in environment   Patrick Delaunay
• [U-Boot] [PATCH 02/19] stm32mp1: update boot mode management   Patrick Delaunay
• [U-Boot] [PATCH 03/19] stm32mp1: update print_cpuinfo()   Patrick Delaunay
• [U-Boot] Commit "arm: kirkwood: configs: dreamplug: Convert to DM_SPI" breaks u-boot on Dreamplug   Leigh Brown
  • [U-Boot] Commit "arm: kirkwood: configs: dreamplug: Convert to DM_SPI" breaks u-boot on Dreamplug   Chris Packham
• [U-Boot] [PATCH v3 00/13] net: Add Allwinner EMAC CLK, RESET support   Jagan Teki
  • [U-Boot] [PATCH v3 01/13] clk: sunxi: Implement A10 EMAC clocks   Jagan Teki
  • [U-Boot] [PATCH v3 02/13] net: sunxi_emac: Add CLK support   Jagan Teki
  • [U-Boot] [PATCH v3 03/13] net: sun8i_emac: Retrieve GMAC clock via 'syscon' phandle   Jagan Teki
  • [U-Boot] [PATCH v3 04/13] clk: Get the CLK by index without device   Jagan Teki
  • [U-Boot] [PATCH v3 05/13] clk: Use clk_get_by_index_tail()   Jagan Teki
  • [U-Boot] [PATCH v3 06/13] test/dm: clk: Add clk_get_by_index[_nodev] test   Jagan Teki
  • [U-Boot] [PATCH v3 07/13] reset: Get the RESET by index without device   Jagan Teki
  • [U-Boot] [PATCH v3 08/13] test/dm: reset: Add reset_get_by_index[_nodev] test   Jagan Teki
  • [U-Boot] [PATCH v3 09/13] clk: sunxi: Implement EMAC, GMAC clocks, resets   Jagan Teki
  • [U-Boot] [PATCH v3 10/13] net: sun8i_emac: Add CLK and RESET support   Jagan Teki
  • [U-Boot] [PATCH v3 11/13] clk: sunxi: h3: Implement EPHY CLK and RESET   Jagan Teki
  • [U-Boot] [PATCH v3 12/13] net: sun8i_emac: Add EPHY CLK and RESET support   Jagan Teki
  • [U-Boot] [PATCH v3 13/13] board: sunxi: gmac: Remove Ethernet clock and reset   Jagan Teki
• [U-Boot] [PATCH 1/1] configs: tinker-rk3288 disable CONFIG_SPL_I2C_SUPPORT   Heinrich Schuchardt
• [U-Boot] [PATCH 1/2] tools/imx8m_image.sh: remove bashism   Fabio Estevam
  • [U-Boot] [PATCH 1/2] tools/imx8m_image.sh: remove bashism   Baruch Siach
• [U-Boot] [PATCH v2 1/2] x86: TunnelCreek: switch P state to the highest freq   Bin Meng
• [U-Boot] [PATCH 1/1] cmd: set CONFIG_SYS_HELP_CMD_WIDTH = 10   Heinrich Schuchardt
• [U-Boot] [PATCH] ARM: kirkwood: add spi0 alias for dreamplug   Chris Packham
  • [U-Boot] [PATCH] ARM: kirkwood: add spi0 alias for dreamplug   Leigh Brown
    • [U-Boot] [PATCH] ARM: kirkwood: add spi0 alias for dreamplug   Chris Packham
      • [U-Boot] [PATCH] ARM: kirkwood: add spi0 alias for dreamplug   Leigh Brown
• [U-Boot] [PATCH v2 1/2] x86: edison: Use proper number of serial interface   Andy Shevchenko
• [U-Boot] [PATCH v2 2/2] x86: edison: Add the rest of UARTs present on board   Andy Shevchenko
  • [U-Boot] [PATCH v2 2/2] x86: edison: Add the rest of UARTs present on board   Bin Meng
    • [U-Boot] [PATCH v2 2/2] x86: edison: Add the rest of UARTs present on board   Andy Shevchenko
      • [U-Boot] [PATCH v2 2/2] x86: edison: Add the rest of UARTs present on board   Andy Shevchenko
• [U-Boot] [PATCH] board: fsl: lx2160aqds: modify the phy fixup code   Pankaj Bansal
• [U-Boot] [PATCH] drivers: net: ls1088ardb: Fix EC1 and EC2 RCW offset   Pramod Kumar
• [U-Boot] Marvell DDR training custom ODT configuration   Baruch Siach
  • [U-Boot] Marvell DDR training custom ODT configuration   Chris Packham
  • [U-Boot] Marvell DDR training custom ODT configuration   Chris Packham
• [U-Boot] pre-reloc fdt scan for non-top-level nodes   viktor babrian
  • [U-Boot] pre-reloc fdt scan for non-top-level nodes   viktor babrian
• [U-Boot] [PATCH 1/2] imx8mq_evk: Move CONFIG_ENV_IS_IN_MMC to Kconfig   Fabio Estevam
  • [U-Boot] [PATCH 2/2] imx8mq_evk: Add myself as a co-maintainer   Fabio Estevam
• [U-Boot] [PATCH v2 1/2] imx8mq_evk/README: add missing firmware extract step   Baruch Siach
  • [U-Boot] [PATCH v2 2/2] imx8mq_evk/README: fix DDR training firmware path   Baruch Siach
• [U-Boot] iMX8QXP MEK: no ethernet   Andrejs Cainikovs
  • [U-Boot] iMX8QXP MEK: no ethernet   Anatolij Gustschin
• [U-Boot] i.MX8MQ: u-boot-spl-ddr.bin not found   Fabio Estevam
  • [U-Boot] i.MX8MQ: u-boot-spl-ddr.bin not found   Andrejs Cainikovs
  • [U-Boot] i.MX8MQ: u-boot-spl-ddr.bin not found   Fabio Estevam
  • [U-Boot] i.MX8MQ: u-boot-spl-ddr.bin not found   Chris Spencer
• [U-Boot] [PATCH v1] x86: acpi: Not every platform has serial console a first device   Andy Shevchenko
  • [U-Boot] [PATCH v1] x86: acpi: Not every platform has serial console a first device   Andy Shevchenko
• [U-Boot] [PATCH v2] x86: acpi: Not every platform has serial console a first device   Andy Shevchenko
• [U-Boot] [PATCH 1/1] efi_loader: error handling for `efidebug boot add`   Heinrich Schuchardt
• [U-Boot] [PATCH 1/3] arm: socfpga: fix comment about SPL memory layout   Simon Goldschmidt
  • [U-Boot] [PATCH 2/3] arm: socfpga: a10: move SPL stack size to Kconfig   Simon Goldschmidt
    • [U-Boot] [PATCH 2/3] arm: socfpga: a10: move SPL stack size to Kconfig   Marek Vasut
  • [U-Boot] [PATCH 3/3] arm: socfpga: put initial U-Boot stack into DDR   Simon Goldschmidt
    • [U-Boot] [PATCH 3/3] arm: socfpga: put initial U-Boot stack into DDR   Marek Vasut
• [U-Boot] [PATCH 1/2] mv_ddr: ddr3: fix tRAS timimg parameter   Chris Packham
  • [U-Boot] [PATCH 2/2] mv_ddr: ddr3: only use active chip-selects when tuning ODT   Chris Packham
• [U-Boot] db-88f6820-amc doesn't boot on latest u-boot/master   Chris Packham
• [U-Boot] [PATCH 1/1] efi_loader: HII protocols: fix new_package_list()   Heinrich Schuchardt
• [U-Boot] [RFC 0/2] arm64: zynqmp: pass a PMUFW config object   Luca Ceresoli
  • [U-Boot] [RFC 1/2] arm64: zynqmp: add minimal include files to build a pm_cfg_obj.c   Luca Ceresoli
  • [U-Boot] [RFC 2/2] arm64: zynqmp: install a PMU firmware config object at runtime   Luca Ceresoli
• [U-Boot] [PATCH 1/1] efi_loader: HII protocols: informative error message   Heinrich Schuchardt
• [U-Boot] [RESEND PATCH 2/2] ARM: qemu-arm: enable USB boot in distro boot with UEFI   Heinrich Schuchardt