[U-Boot] [PATCH v3 0/8] Add network support for Luton SoCs

Daniel Schwierzeck daniel.schwierzeck at gmail.com
Fri Feb 1 13:18:55 UTC 2019



Am 31.01.19 um 15:30 schrieb Horatiu Vultur:
> This series adds network support for Luton SoCs. Currently
> there is not support for Luton SoCs in Linux.
> 
> v3-changes:
>  - reorder the changes of the commits and add Kconfig
>    in mscc_eswitch folder
> 
> v2-changes:
>  - reuse functions from ocelot for luton network driver
> 
> Horatiu Vultur (8):
>   net: mscc: Move ocelot_switch to mscc_eswitch folder
>   net: mscc: Move miim commands into separate file.
>   net: mscc: Move ocelot_send and ocelot_recv in a different file.
>   net: mscc: Move mac_table_add function into different file.
>   net: mscc: Remove unused variables
>   mips: mscc: luton: Add ethernet nodes for Luton.
>   net: Add MSCC Luton networkd driver.
>   configs: mscc_luton: Add network support.
> 
>  MAINTAINERS                                    |   2 +-
>  arch/mips/dts/luton_pcb090.dts                 |  51 ++
>  arch/mips/dts/luton_pcb091.dts                 |  51 ++
>  arch/mips/dts/mscc,luton.dtsi                  | 165 ++++++
>  configs/mscc_luton_defconfig                   |   1 +
>  drivers/net/Kconfig                            |   7 +-
>  drivers/net/Makefile                           |   2 +-
>  drivers/net/mscc_eswitch/Kconfig               |  17 +
>  drivers/net/mscc_eswitch/Makefile              |   3 +
>  drivers/net/mscc_eswitch/luton_switch.c        | 736 +++++++++++++++++++++++++
>  drivers/net/mscc_eswitch/mscc_mac_table.c      |  74 +++
>  drivers/net/mscc_eswitch/mscc_mac_table.h      |  19 +
>  drivers/net/mscc_eswitch/mscc_miim.c           |  74 +++
>  drivers/net/mscc_eswitch/mscc_miim.h           |  12 +
>  drivers/net/mscc_eswitch/mscc_xfer.c           | 139 +++++
>  drivers/net/mscc_eswitch/mscc_xfer.h           |  20 +
>  drivers/net/{ => mscc_eswitch}/ocelot_switch.c | 299 +---------
>  17 files changed, 1392 insertions(+), 280 deletions(-)
>  create mode 100644 drivers/net/mscc_eswitch/Kconfig
>  create mode 100644 drivers/net/mscc_eswitch/Makefile
>  create mode 100644 drivers/net/mscc_eswitch/luton_switch.c
>  create mode 100644 drivers/net/mscc_eswitch/mscc_mac_table.c
>  create mode 100644 drivers/net/mscc_eswitch/mscc_mac_table.h
>  create mode 100644 drivers/net/mscc_eswitch/mscc_miim.c
>  create mode 100644 drivers/net/mscc_eswitch/mscc_miim.h
>  create mode 100644 drivers/net/mscc_eswitch/mscc_xfer.c
>  create mode 100644 drivers/net/mscc_eswitch/mscc_xfer.h
>  rename drivers/net/{ => mscc_eswitch}/ocelot_switch.c (62%)
> 

series applied to u-boot-mips, thanks.

-- 
- Daniel


More information about the U-Boot mailing list