February 2019 Archives by author
Starting: Fri Feb 1 00:01:05 UTC 2019
Ending: Thu Feb 28 23:59:12 UTC 2019
Messages: 3227
- [U-Boot] [PATCH 1/2] splash: Use splashfile instead of location->name
Jonas Mark (BT-FIR/ENG1)
- [U-Boot] [PATCH 2/2] splash: Load internal and external data from FIT
Jonas Mark (BT-FIR/ENG1)
- [U-Boot] [PATCH v2 1/2] splash: Use splashfile instead of location->name
Jonas Mark (BT-FIR/ENG1)
- [U-Boot] [PATCH v2 1/2] splash: Use splashfile instead of location->name
Jonas Mark (BT-FIR/ENG1)
- [U-Boot] [PATCH v2 1/2] splash: Use splashfile instead of location->name
Jonas Mark (BT-FIR/ENG1)
- [U-Boot] i.MX HAB: U-Boot loading from SPI NOR flash
Fernando AE
- [U-Boot] i.MX HAB: U-Boot loading from SPI NOR flash
Fernando AE
- [U-Boot] [PATCH v2 3/3] am335x, guardian: Add support for the bosch guardian board
LTEC AG
- [U-Boot] [PATCH v2 00/13] Add Support for eMMC in AM65x-evm
Faiz Abbas
- [U-Boot] [PATCH v2 01/13] arm64: dts: k3: Sync sdhci0 node from kernel
Faiz Abbas
- [U-Boot] [PATCH v2 02/13] mmc: am654_mmc: Change driver name
Faiz Abbas
- [U-Boot] [PATCH v2 03/13] mmc: am654_sdhci: Remove quirks
Faiz Abbas
- [U-Boot] [PATCH v2 04/13] regmap: Add API regmap_init_mem_index()
Faiz Abbas
- [U-Boot] [PATCH v2 05/13] regmap: Add support for polling on a register
Faiz Abbas
- [U-Boot] [PATCH v2 06/13] mmc: sdhci: Add support for sdhci-caps-mask
Faiz Abbas
- [U-Boot] [PATCH v2 07/13] mmc: sdhci: Make sdhci_set_clock() non static
Faiz Abbas
- [U-Boot] [PATCH v2 08/13] arm: dts: k3: Add phy specific properties to SD card node
Faiz Abbas
- [U-Boot] [PATCH v2 09/13] mmc: sdhci: Make set_ios_post() return int
Faiz Abbas
- [U-Boot] [PATCH v2 10/13] mmc: am654_sdhci: Add Support for PHY
Faiz Abbas
- [U-Boot] [PATCH v2 11/13] configs: am65x_evm: Enable CONFIG_REGMAP
Faiz Abbas
- [U-Boot] [PATCH v2 12/13] mmc: sdhci: Add support for HOST_CONTROL2 and setting UHS timings
Faiz Abbas
- [U-Boot] [PATCH v2 13/13] mmc: am654_sdhci: Add a platform specific set_control_reg() callback
Faiz Abbas
- [U-Boot] [PATCH v3 00/13] Add Support for eMMC in AM65x-evm
Faiz Abbas
- [U-Boot] [PATCH v3 01/13] arm64: dts: k3: Sync sdhci0 node from kernel
Faiz Abbas
- [U-Boot] [PATCH v3 02/13] mmc: am654_mmc: Change driver name
Faiz Abbas
- [U-Boot] [PATCH v3 03/13] mmc: am654_sdhci: Remove quirks
Faiz Abbas
- [U-Boot] [PATCH v3 04/13] regmap: Add API regmap_init_mem_index()
Faiz Abbas
- [U-Boot] [PATCH v3 05/13] regmap: Add support for polling on a register
Faiz Abbas
- [U-Boot] [PATCH v3 06/13] mmc: sdhci: Add support for sdhci-caps-mask
Faiz Abbas
- [U-Boot] [PATCH v3 07/13] mmc: sdhci: Make sdhci_set_clock() non static
Faiz Abbas
- [U-Boot] [PATCH v3 08/13] arm: dts: k3: Add phy specific properties to SD card node
Faiz Abbas
- [U-Boot] [PATCH v3 09/13] mmc: sdhci: Make set_ios_post() return int
Faiz Abbas
- [U-Boot] [PATCH v3 10/13] mmc: am654_sdhci: Add Support for PHY
Faiz Abbas
- [U-Boot] [PATCH v3 11/13] configs: am65x_evm: Enable CONFIG_REGMAP
Faiz Abbas
- [U-Boot] [PATCH v3 12/13] mmc: sdhci: Add support for HOST_CONTROL2 and setting UHS timings
Faiz Abbas
- [U-Boot] [PATCH v3 13/13] mmc: am654_sdhci: Add a platform specific set_control_reg() callback
Faiz Abbas
- [U-Boot] [PATCH v3 05/13] regmap: Add support for polling on a register
Faiz Abbas
- [U-Boot] [PATCH] configs: dra7xx_evm: Remove ENV_IS_IN_FAT and SPL_ENV_*
Faiz Abbas
- [U-Boot] [PATCH] configs: dra7xx_evm: Remove ENV_IS_IN_FAT and SPL_ENV_*
Faiz Abbas
- [U-Boot] [PATCH 0/4] Add Support for NAND in dra71x-evm
Faiz Abbas
- [U-Boot] [PATCH 1/4] board: ti: dra71: Add pinmux settings for NAND on DRA71x EVM
Faiz Abbas
- [U-Boot] [PATCH 2/4] arm: dra7: Allow NAND to be enabled on DRA71x EVM.
Faiz Abbas
- [U-Boot] [PATCH 3/4] configs: dra71x-evm: Add Support for NAND
Faiz Abbas
- [U-Boot] [PATCH 4/4] configs: ti_omap5_common: Add NAND environment settings
Faiz Abbas
- [U-Boot] [PATCH] configs: dra7xx_evm: Remove ENV_IS_IN_FAT and SPL_ENV_*
Faiz Abbas
- [U-Boot] [PATCH] configs: dra7xx_evm: Remove ENV_IS_IN_FAT and SPL_ENV_*
Faiz Abbas
- [U-Boot] [PATCH] configs: dra7xx_evm: Remove ENV_IS_IN_FAT and SPL_ENV_*
Faiz Abbas
- [U-Boot] [PATCH v2] configs: dra7xx_evm: Remove ENV_IS_IN_FAT
Faiz Abbas
- [U-Boot] [PATCH 4/4] configs: ti_omap5_common: Add NAND environment settings
Faiz Abbas
- [U-Boot] [PATCH v2 0/4] Add Support for NAND in dra71x-evm
Faiz Abbas
- [U-Boot] [PATCH v2 1/4] board: ti: dra71: Add pinmux settings for NAND on DRA71x EVM
Faiz Abbas
- [U-Boot] [PATCH v2 2/4] arm: dra7: Allow NAND to be enabled on DRA71x EVM.
Faiz Abbas
- [U-Boot] [PATCH v2 3/4] configs: dra71x-evm: Add Support for NAND
Faiz Abbas
- [U-Boot] [PATCH v2 4/4] configs: ti_omap5_common: Add NAND environment settings
Faiz Abbas
- [U-Boot] [PATCH 1/2] armv8: emc2305: add support for fan controller
Meenakshi Aggarwal
- [U-Boot] [PATCH] mc : Add support to run MC in 128 MB DDR size
Meenakshi Aggarwal
- [U-Boot] [PATCH] mc : Add support to run MC in 128 MB DDR size
Meenakshi Aggarwal
- [U-Boot] [PATCH] Fix : Uboot crash when booting from SD.
Meenakshi Aggarwal
- [U-Boot] [PATCH] mc : Add support to run MC in 128 MB DDR size
Meenakshi Aggarwal
- [U-Boot] [PATCH v2] armv8 : fsl-layerscape : Fix hang when TFA is used.
Meenakshi Aggarwal
- [U-Boot] [PATCH] L3 cache : arch : arm : lib : Flush L3 after relocation
Meenakshi Aggarwal
- [U-Boot] [PATCH] L3 cache : arch : arm : lib : Flush L3 after relocation
Meenakshi Aggarwal
- [U-Boot] [PATCH v1] mc : Add support to run MC in 128 MB DDR size
Meenakshi Aggarwal
- [U-Boot] [PATCH v1] mc : Add support to run MC in 128 MB DDR size
Meenakshi Aggarwal
- [U-Boot] [PATCH 1/2] cmd: efidebug: add memmap command
Meenakshi Aggarwal
- [U-Boot] [PATCH 1/2] cmd: efidebug: add memmap command
Meenakshi Aggarwal
- [U-Boot] [PATCH 2/2] mc : Reduce MC memory size to 128M
Meenakshi Aggarwal
- [U-Boot] [PATCH v2 01/21] net: FEC: Add compatible for vybrid (vf610) to reuse fec_mxc.c driver
Stefan Agner
- [U-Boot] [PATCH v2 02/21] net: Kconfig: FEC: Add dependency on VF610
Stefan Agner
- [U-Boot] [PATCH v2 03/21] vybrid: ddr: Extend vf610-pinfunc.h with DDR pads definitions
Stefan Agner
- [U-Boot] [PATCH v2 08/21] ARM: DTS: vybrid: Update vf.dtsi file to descibe more vf610 hardware
Stefan Agner
- [U-Boot] [PATCH v2 04/21] vybrid: clock: Provide enable_i2c_clk() function for Vybrid
Stefan Agner
- [U-Boot] [PATCH v2 00/21] imx: vybrid: Update BK4 and PCM052 boards to only use DM/DTS
Stefan Agner
- [U-Boot] [PATCH v2 04/21] vybrid: clock: Provide enable_i2c_clk() function for Vybrid
Stefan Agner
- [U-Boot] IMX6 NAND boot regression
Stefan Agner
- [U-Boot] [PATCH v3 04/22] vybrid: clock: Provide enable_i2c_clk() function for Vybrid
Stefan Agner
- [U-Boot] [PATCH v1 0/2] Allow platform specific service handling on PSCI
Ang, Chee Hong
- [U-Boot] [PATCH v1] mmc: dwmmc: Enable small delay before returning error
Ang, Chee Hong
- [U-Boot] [PATCH v1] mmc: dwmmc: Enable small delay before returning error
Ang, Chee Hong
- [U-Boot] [PATCH v1] mmc: dwmmc: Enable small delay before returning error
Ang, Chee Hong
- [U-Boot] [PATCH v3 0/5] spi-flash: switch to "jedec, spi-nor" binding
Neil Armstrong
- [U-Boot] [PATCH v4 0/4] spi-flash: switch to "jedec, spi-nor" binding
Neil Armstrong
- [U-Boot] [PATCH v4 1/4] dts: switch spi-flash to jedec, spi-nor compatible
Neil Armstrong
- [U-Boot] [PATCH v4 2/4] x86: dts: switch spi-flash to jedec, spi-nor compatible
Neil Armstrong
- [U-Boot] [PATCH v4 3/4] mtd: sf_probe: remove spi-flash compatible
Neil Armstrong
- [U-Boot] [PATCH v4 4/4] doc: device-tree-bindings: switch from spi-flash to jedec, spi-nor
Neil Armstrong
- [U-Boot] [PATCH v4 0/4] spi-flash: switch to "jedec, spi-nor" binding
Neil Armstrong
- [U-Boot] [PATCH] fastboot: common: fix default fastboot_boot on 64-bit
Neil Armstrong
- [U-Boot] [PATCH v2 00/11] SiFive FU540 Support
Auer, Lukas
- [U-Boot] [PATCH v2 09/11] drivers: serial_sifive: Skip baudrate config if no input clock
Auer, Lukas
- [U-Boot] [PATCH v6 01/16] .gitignore: Don't ignore arch/riscv/include/asm/arch
Auer, Lukas
- [U-Boot] [PATCH v6 02/16] Makefile: Fix mrproper make target
Auer, Lukas
- [U-Boot] [PATCH v6 05/16] riscv: Add place-holder asm/arch/clk.h for driver compilation
Auer, Lukas
- [U-Boot] [PATCH v6 09/16] clk: Add SiFive FU540 PRCI clock driver
Auer, Lukas
- [U-Boot] [PATCH v6 15/16] doc: Add a readme guide for SiFive FU540
Auer, Lukas
- [U-Boot] [PATCH v6 16/16] riscv: Enable CONFIG_SYS_BOOT_RAMDISK_HIGH for using initrd
Auer, Lukas
- [U-Boot] [PATCH v6 09/16] clk: Add SiFive FU540 PRCI clock driver
Auer, Lukas
- [U-Boot] [PATCH 0/7] SMP support for RISC-V
Lukas Auer
- [U-Boot] [PATCH 1/7] riscv: add infrastructure for calling functions on other harts
Lukas Auer
- [U-Boot] [PATCH 2/7] riscv: import the supervisor binary interface header file
Lukas Auer
- [U-Boot] [PATCH 3/7] riscv: implement IPI platform functions using SBI
Lukas Auer
- [U-Boot] [PATCH 4/7] riscv: delay initialization of caches and debug UART
Lukas Auer
- [U-Boot] [PATCH 5/7] riscv: add support for multi-hart systems
Lukas Auer
- [U-Boot] [PATCH 6/7] riscv: boot images passed to bootm on all harts
Lukas Auer
- [U-Boot] [PATCH 7/7] riscv: qemu: enable SMP
Lukas Auer
- [U-Boot] [PATCH] riscv: fu540: enable SMP
Lukas Auer
- [U-Boot] [PATCH 0/7] SMP support for RISC-V
Auer, Lukas
- [U-Boot] [PATCH v7 00/15] SiFive FU540 Support
Auer, Lukas
- [U-Boot] [PATCH v7 14/15] doc: Add a readme guide for SiFive FU540
Auer, Lukas
- [U-Boot] [PATCH 1/7] riscv: add infrastructure for calling functions on other harts
Auer, Lukas
- [U-Boot] [PATCH 1/7] riscv: add infrastructure for calling functions on other harts
Auer, Lukas
- [U-Boot] [PATCH 5/7] riscv: add support for multi-hart systems
Auer, Lukas
- [U-Boot] [PATCH 5/7] riscv: add support for multi-hart systems
Auer, Lukas
- [U-Boot] [PATCH] riscv: fu540: enable SMP
Auer, Lukas
- [U-Boot] [PATCH 1/7] riscv: add infrastructure for calling functions on other harts
Auer, Lukas
- [U-Boot] [PATCH 1/7] riscv: add infrastructure for calling functions on other harts
Auer, Lukas
- [U-Boot] [PATCH 1/7] riscv: add infrastructure for calling functions on other harts
Auer, Lukas
- [U-Boot] [PATCH 1/7] riscv: add infrastructure for calling functions on other harts
Auer, Lukas
- [U-Boot] [PATCH 1/7] riscv: add infrastructure for calling functions on other harts
Auer, Lukas
- [U-Boot] [PATCH v2 1/2] splash: Use splashfile instead of location->name
Stefano Babic
- [U-Boot] [PATCH v2 2/2] splash: Load internal and external data from FIT
Stefano Babic
- [U-Boot] [PATCH v2 1/2] splash: Use splashfile instead of location->name
Stefano Babic
- [U-Boot] [PATCH] MTD: mxs_nand: Fix BCH read timeout error on boards requiring ECC
Stefano Babic
- [U-Boot] [PATCH 6/6] doc: imx: habv4: Remove secure_boot.txt guide
Stefano Babic
- [U-Boot] [PATCH v1 2/3] imx: serial_mxc: disable ri and dcd irq in dte mode
Stefano Babic
- [U-Boot] [PATCH 6/6] doc: imx: habv4: Remove secure_boot.txt guide
Stefano Babic
- [U-Boot] PRs, Breakage architecture
Stefano Babic
- [U-Boot] PRs, Breakage architecture
Stefano Babic
- [U-Boot] [PATCH v4 01/20] common: spl_fit: Fix the spl_fit_image_get_os for FIT_IMAGE_TINY
Stefano Babic
- [U-Boot] Pull request: u-boot-imx u -boot-imx-201900216
Stefano Babic
- [U-Boot] IMX6 DM_USB / DM_MMC requires OF_CONTROL?
Stefano Babic
- [U-Boot] [u-boot] [PATCH] pci: layerscape: add option to statically allocate PCI StreamIDs
Pankaj Bansal
- [U-Boot] [PATCH] drivers: net: ldpaa_eth: fix resource leak
Pankaj Bansal
- [U-Boot] [PATCH] drivers: net: ldpaa_eth: check if the dpmac is enabled
Pankaj Bansal
- [U-Boot] [PATCH v6] lx2160aqds : Add support for LX2160AQDS platform
Pankaj Bansal
- [U-Boot] [PATCH] drivers: net: ldpaa_eth: check if the dpmac is enabled
Pankaj Bansal
- [U-Boot] [PATCH] board: fsl: lx2160aqds: modify the phy fixup code
Pankaj Bansal
- [U-Boot] [PATCH] cros: Expand the Chromium OS documentation
Tristan Bastian
- [U-Boot] [PATCH] cros: Expand the Chromium OS documentation
Tristan Bastian
- [U-Boot] [REGRESSION] tegra124: nyan-big: LPAE not working
Tristan Bastian
- [U-Boot] [PATCH 1/2] nyan-big: change spi delay
Tristan Bastian
- [U-Boot] [REGRESSION] tegra: efi: EFI boot on nyan-big/tegra124 not possible
Tristan Bastian
- [U-Boot] [PATCH] ARM: tegra: enable ums on nyan boards
Tristan Bastian
- [U-Boot] [PATCH v2] ARM: tegra: enable ums on nyan boards
Tristan Bastian
- [U-Boot] [PATCH v2] ARM: tegra: enable ums on nyan boards
Tristan Bastian
- [U-Boot] [PATCH] configs: fsl: move DDR specific defines to Kconfig
Rajesh Bhagat
- [U-Boot] [PATCH] arm: dts: am33xx: add u-boot, dm-spl to ocp bus
Felix Brack
- [U-Boot] [PATCH] arm: dts: am33xx: add u-boot, dm-spl to ocp bus
Felix Brack
- [U-Boot] [PATCH v2] arm: dts: am33xx: introduce 'am33xx-u-boot.dtsi'
Felix Brack
- [U-Boot] [PATCH v2] arm: dts: am33xx: introduce 'am33xx-u-boot.dtsi'
Felix Brack
- [U-Boot] [PATCH 3/3] am335x, guardian: Add support for the bosch guardian board
Felix Brack
- [U-Boot] [PATCH v2 3/3] am335x, guardian: Add support for the bosch guardian board
Felix Brack
- [U-Boot] [PATCH] arm: pdu001: Fix order of include files
Felix Brack
- [U-Boot] [PATCH v3 3/3] am335x, guardian: Add support for the bosch guardian board
Felix Brack
- [U-Boot] [PATCH v4 00/20] SF: Migrate to Linux SPI NOR framework
Boris Brezillon
- [U-Boot] [PATCH v4 00/20] SF: Migrate to Linux SPI NOR framework
Boris Brezillon
- [U-Boot] [PATCH] hsdk: readme: Suggest getting pyelftools with pip
Alexey Brodkin
- [U-Boot] Commit "ARM: CPU: arm926ejs: Consolidate cache routines to common file" breaks u-boot on Dreamplug
Leigh Brown
- [U-Boot] Commit "ARM: CPU: arm926ejs: Consolidate cache routines to common file" breaks u-boot on Dreamplug
Leigh Brown
- [U-Boot] Commit "arm: kirkwood: configs: dreamplug: Convert to DM_SPI" breaks u-boot on Dreamplug
Leigh Brown
- [U-Boot] [PATCH] ARM: kirkwood: add spi0 alias for dreamplug
Leigh Brown
- [U-Boot] [PATCH] ARM: kirkwood: add spi0 alias for dreamplug
Leigh Brown
- [U-Boot] Pull request: BCM ARM changes
Matthias Brugger
- [U-Boot] [PATCH] armv8: Disable exception vectors in SPL by default
Matthias Brugger
- [U-Boot] [PATCH v2] armv8: Disable exception vectors in SPL by default
Matthias Brugger
- [U-Boot] [PATCH v2] cmd: clk: Handle ENODEV from clk_get_rate
Matthias Brugger
- [U-Boot] [PATCH] efi_loader: Fix serial console size detection
Matthias Brugger
- [U-Boot] [PATCH v3 1/1] gpio: altera_pio: fix get_value
Julien Béraud
- [U-Boot] [RFC][PATCH] cmd: pxe: Display splashscreen from extlinux.conf input
Patrice CHOTARD
- [U-Boot] [PATCH 3/4] mmc: stm32_sdmmc2: Update DT properties with v4.19 bindings
Patrice CHOTARD
- [U-Boot] iMX8QXP MEK: no ethernet
Andrejs Cainikovs
- [U-Boot] i.MX8MQ: u-boot-spl-ddr.bin not found
Andrejs Cainikovs
- [U-Boot] [PATCH v4 3/3] cmd: mdio: Add new parameter to access MMD PHY registers
Carlo Caione
- [U-Boot] [PATCH v4 3/3] cmd: mdio: Add new parameter to access MMD PHY registers
Carlo Caione
- [U-Boot] [PATCH v5 0/3] Add MMD PHY helpers
Carlo Caione
- [U-Boot] [PATCH v5 1/3] net: phy: Add generic helpers to access MMD PHY registers
Carlo Caione
- [U-Boot] [PATCH v5 2/3] net: phy: ti: use generic helpers to access MMD registers
Carlo Caione
- [U-Boot] [PATCH v5 3/3] cmd: mdio: Switch to generic helpers when accessing the registers
Carlo Caione
- [U-Boot] [PATCH v5 3/3] cmd: mdio: Switch to generic helpers when accessing the registers
Carlo Caione
- [U-Boot] mx6cuboxi: Detecting wrong .dtb (v2019.01)
Vagrant Cascadian
- [U-Boot] Changed syntax for dumpimage, failing tests
Vagrant Cascadian
- [U-Boot] mx6cuboxi: Detecting wrong .dtb (v2019.01)
Vagrant Cascadian
- [U-Boot] mx6cuboxi: Detecting wrong .dtb (v2019.01)
Vagrant Cascadian
- [U-Boot] [PATCH] test: Update test-imagetools.sh to match new syntax
Vagrant Cascadian
- [U-Boot] Dreamplug fails to detect SPI and USB
Vagrant Cascadian
- [U-Boot] [RFC 0/2] arm64: zynqmp: pass a PMUFW config object
Luca Ceresoli
- [U-Boot] [RFC 1/2] arm64: zynqmp: add minimal include files to build a pm_cfg_obj.c
Luca Ceresoli
- [U-Boot] [RFC 2/2] arm64: zynqmp: install a PMU firmware config object at runtime
Luca Ceresoli
- [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Chee, Tien Fong
- [U-Boot] [PATCH v2 2/2] fs: fat: Reduce default max clustersize 64KiB from malloc pool
Chee, Tien Fong
- [U-Boot] [PATCH v7 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
Chee, Tien Fong
- [U-Boot] [PATCH v7 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Chee, Tien Fong
- [U-Boot] [PATCH v7 4/7] ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK
Chee, Tien Fong
- [U-Boot] [PATCH v7 7/7] ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL
Chee, Tien Fong
- [U-Boot] [PATCH v2 1/2] fs: fat: dynamically allocate memory for temporary buffer
Chee, Tien Fong
- [U-Boot] [PATCH v2 1/2] fs: fat: dynamically allocate memory for temporary buffer
Chee, Tien Fong
- [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Chee, Tien Fong
- [U-Boot] [PATCH v7 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
Chee, Tien Fong
- [U-Boot] [PATCH v7 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Chee, Tien Fong
- [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Chee, Tien Fong
- [U-Boot] [PATCH v7 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Chee, Tien Fong
- [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Chee, Tien Fong
- [U-Boot] [PATCH v7 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
Chee, Tien Fong
- [U-Boot] [PATCH v4] misc: fs_loader: Add support for initializing block device
Chee, Tien Fong
- [U-Boot] [PATCH v7 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Chee, Tien Fong
- [U-Boot] [PATCH v7 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
Chee, Tien Fong
- [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Chee, Tien Fong
- [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Chee, Tien Fong
- [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Chee, Tien Fong
- [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Chee, Tien Fong
- [U-Boot] [PATCH v7 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Chee, Tien Fong
- [U-Boot] [PATCH v7 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Chee, Tien Fong
- [U-Boot] [PATCH v8 1/8] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Chee, Tien Fong
- [U-Boot] [PATCH v8 2/8] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
Chee, Tien Fong
- [U-Boot] [PATCH v8 3/8] fit: Add function declarations to the header file
Chee, Tien Fong
- [U-Boot] [PATCH v8 4/8] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Chee, Tien Fong
- [U-Boot] [PATCH v8 6/8] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs
Chee, Tien Fong
- [U-Boot] [PATCH v8 1/8] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Chee, Tien Fong
- [U-Boot] [PATCH v8 2/8] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
Chee, Tien Fong
- [U-Boot] [PATCH v8 4/8] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Chee, Tien Fong
- [U-Boot] [PATCH v8 6/8] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs
Chee, Tien Fong
- [U-Boot] [PATCH v8 3/8] fit: Add function declarations to the header file
Chee, Tien Fong
- [U-Boot] [PATCH v8 4/8] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Chee, Tien Fong
- [U-Boot] [PATCH v8 2/8] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
Chee, Tien Fong
- [U-Boot] [PATCH v8 3/8] fit: Add function declarations to the header file
Chee, Tien Fong
- [U-Boot] [PATCH v8 4/8] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Chee, Tien Fong
- [U-Boot] [PATCH v8 6/8] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs
Chee, Tien Fong
- [U-Boot] [PATCH v8 4/8] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Chee, Tien Fong
- [U-Boot] [PATCH v8 6/8] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs
Chee, Tien Fong
- [U-Boot] [PATCH v8 2/8] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
Chee, Tien Fong
- [U-Boot] [PATCH v8 6/8] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs
Chee, Tien Fong
- [U-Boot] [PATCH v8 6/8] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs
Chee, Tien Fong
- [U-Boot] [PATCH v8 6/8] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs
Chee, Tien Fong
- [U-Boot] [PATCH v8 2/8] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
Chee, Tien Fong
- [U-Boot] [PATCH v8 2/8] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
Chee, Tien Fong
- [U-Boot] [PATCH] fpga: Replace char * with const char * for filename
Chee, Tien Fong
- [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer
Chee, Tien Fong
- [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer
Chee, Tien Fong
- [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer
Chee, Tien Fong
- [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer
Chee, Tien Fong
- [U-Boot] [PATCH v9 0/7] Add support for loading FPGA bitstream
Chee, Tien Fong
- [U-Boot] [PATCH] misc: fs_loader: Replace label with DT phandle
Chee, Tien Fong
- [U-Boot] [PATCH v9 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Chee, Tien Fong
- [U-Boot] [PATCH v9 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
Chee, Tien Fong
- [U-Boot] [PATCH v9 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
Chee, Tien Fong
- [U-Boot] [PATCH v9 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Chee, Tien Fong
- [U-Boot] [PATCH v9 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Chee, Tien Fong
- [U-Boot] [PATCH v9 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
Chee, Tien Fong
- [U-Boot] [PATCH v9 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Chee, Tien Fong
- [U-Boot] [PATCH v9 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Chee, Tien Fong
- [U-Boot] [PATCH v9 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Chee, Tien Fong
- [U-Boot] [PATCH v9 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Chee, Tien Fong
- [U-Boot] [PATCH 5/7] riscv: add support for multi-hart systems
Rick Chen
- [U-Boot] [PATCH 1/7] riscv: add infrastructure for calling functions on other harts
Rick Chen
- [U-Boot] SiFive FU540 U-Boot patches,
Rick Chen
- [U-Boot] SiFive FU540 U-Boot patches,
Rick Chen
- [U-Boot] SiFive FU540 U-Boot patches,
Rick Chen
- [U-Boot] SiFive FU540 U-Boot patches,
Rick Chen
- [U-Boot] U-Boot Digest, Vol 129, Issue 63
Terrance Chiang
- [U-Boot] [PATCH 0/4] Add STM32MP1 Discovery boards
Patrice Chotard
- [U-Boot] [PATCH 1/4] ARM: dts: stm32: Synchronize DT with kernel one
Patrice Chotard
- [U-Boot] [PATCH 2/4] board: stm32mp1: Update README file
Patrice Chotard
- [U-Boot] [PATCH 3/4] Board: stm32mp1: Add supply current boot information
Patrice Chotard
- [U-Boot] [PATCH 4/4] ARM: dts: stm32mp1: Add adc nodes
Patrice Chotard
- [U-Boot] [PATCH 0/4] Update stm32_sdmmc2 driver and DT bindings
Patrice Chotard
- [U-Boot] [PATCH 1/4] ARM: dts: stm32: Update sdmmc binding for stm32h743i-eval
Patrice Chotard
- [U-Boot] [PATCH 2/4] ARM: dts: stm32: Update sdmmc binding for stm32mp157c-ed1
Patrice Chotard
- [U-Boot] [PATCH 3/4] mmc: stm32_sdmmc2: Update DT properties with v4.19 bindings
Patrice Chotard
- [U-Boot] [PATCH 4/4] mmc: stm32_sdmmc2: Fix r1b timeout issue
Patrice Chotard
- [U-Boot] [PATCH v2 0/4] Update stm32_sdmmc2 driver and DT bindings
Patrice Chotard
- [U-Boot] [PATCH v2 1/4] ARM: dts: stm32: Update sdmmc binding for stm32h743i-eval
Patrice Chotard
- [U-Boot] [PATCH v2 2/4] ARM: dts: stm32: Update sdmmc binding for stm32mp157c-ed1
Patrice Chotard
- [U-Boot] [PATCH v2 3/4] mmc: stm32_sdmmc2: Update DT properties with v4.19 bindings
Patrice Chotard
- [U-Boot] [PATCH v2 4/4] mmc: stm32_sdmmc2: Fix r1b timeout issue
Patrice Chotard
- [U-Boot] [PATCH v1 0/2] Update pinctrl-uclass
Patrice Chotard
- [U-Boot] [PATCH v1 1/2] dm: pinctrl: Avoid race condition on probe for UCLASS_PINCTRL
Patrice Chotard
- [U-Boot] [PATCH v1 2/2] dm: pinctrl: Skip gpio-controller node in pinconfig_post_bind()
Patrice Chotard
- [U-Boot] [PATCH v1 0/4] Add STMFX gpio expander support for stm32mp157c-ev1 board
Patrice Chotard
- [U-Boot] [PATCH v1 1/4] pinctrl: Add STMFX GPIO expander Pinctrl/GPIO driver
Patrice Chotard
- [U-Boot] [PATCH v1 2/4] config: stm32mp15: Enable STMFX support
Patrice Chotard
- [U-Boot] [PATCH v1 3/4] board: stm32mp1: Force pinctrl driver probe in board_init()
Patrice Chotard
- [U-Boot] [PATCH v1 4/4] ARM: dts: Add STMFX gpio expander support for stm32mp157c-ev1
Patrice Chotard
- [U-Boot] [PATCH 1/2] configs: stm32f746-disco: update EXTRA_ENV_SETTINGS
Patrice Chotard
- [U-Boot] [PATCH 2/2] configs: stm32f746-disco: enable CONFIG_DISTRO_DEFAULTS
Patrice Chotard
- [U-Boot] [PATCH v1 0/9] Synchronize DT with v4.20 kernel for STM32F4/F7 and H7 boards
Patrice Chotard
- [U-Boot] [PATCH v1 1/9] ARM:dts: stm32: sort nodes by alphabetical order in f4 u-boot files
Patrice Chotard
- [U-Boot] [PATCH v1 2/9] ARM: dts: stm32: Sync DT files with v4.20 kernel for stm32f4
Patrice Chotard
- [U-Boot] [PATCH v1 3/9] ARM: dts: stm32: Migrate U-boot nodes to U-boot DT files for stm32f7
Patrice Chotard
- [U-Boot] [PATCH v1 4/9] ARM: dts: stm32: Sync DT with v4.20 kernel for stm32f7
Patrice Chotard
- [U-Boot] [PATCH v1 5/9] ARM: dts: Migrate U-boot nodes to U-boot DT files for stm32h7
Patrice Chotard
- [U-Boot] [PATCH v1 6/9] ARM: dts: stm32: Sync DT with v4.20 kernel for stm32h7
Patrice Chotard
- [U-Boot] [PATCH v1 7/9] ARM: dts: stm32: Restore old usart1 clock bindings for stm32f7
Patrice Chotard
- [U-Boot] [PATCH v1 8/9] pinctrl: stm32: Add st, stm32f769-pinctrl compatible string
Patrice Chotard
- [U-Boot] [PATCH v1 9/9] mmc: arm_pl180_mmci: Sync compatible with kernel
Patrice Chotard
- [U-Boot] [PATCH 1/2] configs: stm32f746-disco: Enable SPI_FLASH_MACRONIX
Patrice Chotard
- [U-Boot] [PATCH 2/2] board: stm32f746-disco: Get MII/RMII phy_mode from DT
Patrice Chotard
- [U-Boot] [PATCH v2 0/2] Update pinctrl-uclass
Patrice Chotard
- [U-Boot] [PATCH v2 1/2] dm: pinctrl: Avoid race condition on probe for UCLASS_PINCTRL
Patrice Chotard
- [U-Boot] [PATCH v2 2/2] dm: pinctrl: Skip gpio-controller node in pinconfig_post_bind()
Patrice Chotard
- [U-Boot] [PATCH] usb: host: Print device name when scanning
Ismael Luceno Cortes
- [U-Boot] [PATCH] cmd: pcmcia: Build only if CONFIG_CMD_PCMCIA=y
Ismael Luceno Cortes
- [U-Boot] [PATCH] usb: host: Print device name when scanning
Ismael Luceno Cortes
- [U-Boot] [PATCH] cmd: clk: Handle ENODEV from clk_get_rate
Ismael Luceno Cortes
- [U-Boot] [PATCH v2] cmd: clk: Handle ENODEV from clk_get_rate
Ismael Luceno Cortes
- [U-Boot] [PATCH v3] cmd: clk: Handle ENODEV from clk_get_rate
Ismael Luceno Cortes
- [U-Boot] [PATCH 2/2] dm: core: remove the duplicated function dm_ofnode_pre_reloc
Patrick DELAUNAY
- [U-Boot] [PATCH 1/2] fdt: Allow indicating a node is for U-Boot proper only
Patrick DELAUNAY
- [U-Boot] [PATCH v3 2/5] dts: switch spi-flash to jedec, spi-nor compatible
Patrick DELAUNAY
- [U-Boot] [PATCH v3 5/5] doc: device-tree-bindings: switch from spi-flash to jedec, spi-nor
Patrick DELAUNAY
- [U-Boot] [PATCH 1/2] fdt: Allow indicating a node is for U-Boot proper only
Patrick DELAUNAY
- [U-Boot] [PATCH 1/2] fdt: Allow indicating a node is for U-Boot proper only
Patrick DELAUNAY
- [U-Boot] [PATCH 1/2] fdt: Allow indicating a node is for U-Boot proper only
Patrick DELAUNAY
- [U-Boot] [PATCH v3] dm: spi: Read default speed and mode values from DT
Patrick DELAUNAY
- [U-Boot] [PATCH v1 2/2] dm: pinctrl: Skip gpio-controller node in pinconfig_post_bind()
Patrick DELAUNAY
- [U-Boot] [PATCH v3] dm: spi: Read default speed and mode values from DT
Patrick DELAUNAY
- [U-Boot] [PATCH v3] dm: spi: Read default speed and mode values from DT
Patrick DELAUNAY
- [U-Boot] [PATCH v8 00/15] SiFive FU540 Support
Palmer Dabbelt
- [U-Boot] [PATCH 0/2] configs: Minor fixes
Alexander Dahl
- [U-Boot] [PATCH 1/2] configs: Remove version control leftovers
Alexander Dahl
- [U-Boot] [PATCH 2/2] configs: sama5d27_som1_ek: Activate misc init for uSD variant
Alexander Dahl
- [U-Boot] [PATCH] arm: mach-k3: common: Clean up ATF image startup function
Andreas Dannenberg
- [U-Boot] [PATCH 0/7] AM65x HS device support
Andreas Dannenberg
- [U-Boot] [PATCH 1/3] configs: am65x_evm_r5: Enable GPT support
Andrew F. Davis
- [U-Boot] [PATCH 2/3] am65x_evm: Allow bootm to load larger kernels
Andrew F. Davis
- [U-Boot] [PATCH 3/3] armv7R: K3: am654: Fix order of debug elements in x509 template
Andrew F. Davis
- [U-Boot] [PATCH] board: ti: Move fastboot functions out of TI_SECURE_DEVICE ifdef
Andrew F. Davis
- [U-Boot] [PATCH 0/7] AM65x HS device support
Andrew F. Davis
- [U-Boot] [PATCH 1/7] arm: K3: Avoid use of MCU_PSRAM0 before SYSFW is loaded
Andrew F. Davis
- [U-Boot] [PATCH 2/7] firmware: ti_sci: Add support for firewall management
Andrew F. Davis
- [U-Boot] [PATCH 3/7] firmware: ti_sci: Modify auth_boot TI-SCI API to match new version
Andrew F. Davis
- [U-Boot] [PATCH 4/7] arm: mach-k3: Add secure device support
Andrew F. Davis
- [U-Boot] [PATCH 5/7] arm: mach-k3: Add secure device build support
Andrew F. Davis
- [U-Boot] [PATCH 6/7] configs: Add a config for AM65x High Security EVM
Andrew F. Davis
- [U-Boot] [PATCH 7/7] doc: Update info on using K3 secure devices
Andrew F. Davis
- [U-Boot] [PATCH 1/7] arm: K3: Avoid use of MCU_PSRAM0 before SYSFW is loaded
Andrew F. Davis
- [U-Boot] [PATCH 5/7] arm: mach-k3: Add secure device build support
Andrew F. Davis
- [U-Boot] [PATCH 1/7] arm: K3: Avoid use of MCU_PSRAM0 before SYSFW is loaded
Andrew F. Davis
- [U-Boot] [PATCH 5/7] arm: mach-k3: Add secure device build support
Andrew F. Davis
- [U-Boot] [PATCH 5/7] arm: mach-k3: Add secure device build support
Andrew F. Davis
- [U-Boot] [PATCH v2 0/7] AM65x HS device support
Andrew F. Davis
- [U-Boot] [PATCH v2 1/7] arm: K3: Avoid use of MCU_PSRAM0 before SYSFW is loaded
Andrew F. Davis
- [U-Boot] [PATCH v2 2/7] firmware: ti_sci: Add support for firewall management
Andrew F. Davis
- [U-Boot] [PATCH v2 3/7] firmware: ti_sci: Modify auth_boot TI-SCI API to match new version
Andrew F. Davis
- [U-Boot] [PATCH v2 4/7] arm: mach-k3: Add secure device support
Andrew F. Davis
- [U-Boot] [PATCH v2 5/7] arm: mach-k3: Add secure device build support
Andrew F. Davis
- [U-Boot] [PATCH v2 6/7] configs: Add a config for AM65x High Security EVM
Andrew F. Davis
- [U-Boot] [PATCH v2 7/7] doc: Update info on using K3 secure devices
Andrew F. Davis
- [U-Boot] [PATCH 1/2] fdt: Allow indicating a node is for U-Boot proper only
Patrick Delaunay
- [U-Boot] [PATCH 2/2] dm: core: remove the duplicated function dm_ofnode_pre_reloc
Patrick Delaunay
- [U-Boot] [PATCH 0/8] pmic: stpmic1: rename and update stpmic1 driver
Patrick Delaunay
- [U-Boot] [PATCH 1/8] regulator: stpmu1: update buck1 range
Patrick Delaunay
- [U-Boot] [PATCH 2/8] power: stpmu1: rename files to stpmic1
Patrick Delaunay
- [U-Boot] [PATCH 3/8] power: rename stpmu1 to official name stpmic1
Patrick Delaunay
- [U-Boot] [PATCH 4/8] stpmic1: update register names
Patrick Delaunay
- [U-Boot] [PATCH 5/8] pmic: stpmu1: add power switch off support
Patrick Delaunay
- [U-Boot] [PATCH 6/8] stm32mp1: add command poweroff
Patrick Delaunay
- [U-Boot] [PATCH 7/8] stm32mp1: dts: activate psci-1.0
Patrick Delaunay
- [U-Boot] [PATCH 8/8] stpmic1: add NVM update support in fuse command
Patrick Delaunay
- [U-Boot] [PATCH v2 0/4] stm32mp1: add trusted boot with TF-A
Patrick Delaunay
- [U-Boot] [PATCH v2 1/4] stm32mp1: add trusted boot with TF-A
Patrick Delaunay
- [U-Boot] [PATCH v2 2/4] stm32mp1: bsec: access with SMC for trusted boot
Patrick Delaunay
- [U-Boot] [PATCH v2 3/4] stm32mp1: display board information
Patrick Delaunay
- [U-Boot] [PATCH v2 4/4] clk: stm32m1: add debug information
Patrick Delaunay
- [U-Boot] [PATCH v3 0/3] stm32mp1: add trusted boot with TF-A
Patrick Delaunay
- [U-Boot] [PATCH v3 1/3] stm32mp1: add trusted boot with TF-A
Patrick Delaunay
- [U-Boot] [PATCH v3 2/3] stm32mp1: bsec: access with SMC for trusted boot
Patrick Delaunay
- [U-Boot] [PATCH v3 3/3] stm32mp1: display board information
Patrick Delaunay
- [U-Boot] [PATCH] dm: remove pre reloc properties in SPL and TPL device tree
Patrick Delaunay
- [U-Boot] [PATCH v4 0/3] stm32mp1: add trusted boot with TF-A
Patrick Delaunay
- [U-Boot] [PATCH v4 1/3] stm32mp1: add trusted boot with TF-A
Patrick Delaunay
- [U-Boot] [PATCH v4 2/3] stm32mp1: bsec: access with SMC for trusted boot
Patrick Delaunay
- [U-Boot] [PATCH v4 3/3] stm32mp1: display board information
Patrick Delaunay
- [U-Boot] [PATCH] doc: binding: rename directory ram to memory-controller
Patrick Delaunay
- [U-Boot] [PATCH 0/7] Migrate SPI defines to Kconfig
Patrick Delaunay
- [U-Boot] [PATCH 1/7] bcm7445: move some configuration in defconfig file
Patrick Delaunay
- [U-Boot] [PATCH 2/7] controlcenterdc: move some configuration in defconfig file
Patrick Delaunay
- [U-Boot] [PATCH 3/7] exynos: replace CONFIG_ENV_SPI_BASE by CONFIG_SYS_SPI_BASE
Patrick Delaunay
- [U-Boot] [PATCH 4/7] tqma6s_wru4_mmc: manage board_spi_cs_gpio correctly
Patrick Delaunay
- [U-Boot] [PATCH 5/7] Convert CONFIG_SF_DEFAULT_* to Kconfig
Patrick Delaunay
- [U-Boot] [PATCH 6/7] Convert CONFIG_DEFAULT_SPI_* to Kconfig
Patrick Delaunay
- [U-Boot] [PATCH 7/7] Convert CONFIG_ENV_SPI_* to Kconfig
Patrick Delaunay
- [U-Boot] [PATCH v4 0/1] Read default speed and mode values from DT
Patrick Delaunay
- [U-Boot] [PATCH v4] dm: spi: Read default speed and mode values from DT
Patrick Delaunay
- [U-Boot] [PATCH 00/19] stm32mp1: update of stm32mp arch and stm32mp1 board
Patrick Delaunay
- [U-Boot] [PATCH 01/19] stm32mp1: add runtime information in environment
Patrick Delaunay
- [U-Boot] [PATCH 02/19] stm32mp1: update boot mode management
Patrick Delaunay
- [U-Boot] [PATCH 03/19] stm32mp1: update print_cpuinfo()
Patrick Delaunay
- [U-Boot] [PATCH 04/19] stm32mp1: spl: add spl_display_print
Patrick Delaunay
- [U-Boot] [PATCH 05/19] stm32mp1: cosmetic cleanup Kconfig
Patrick Delaunay
- [U-Boot] [PATCH 06/19] stm32mp1: cosmetic: add comment on psci_migrate_info_type return value
Patrick Delaunay
- [U-Boot] [PATCH 07/19] stm32mp1: spl: hang with trace when DDR init failed
Patrick Delaunay
- [U-Boot] [PATCH 08/19] stm32mp1: update bootcmd
Patrick Delaunay
- [U-Boot] [PATCH 09/19] stm32mp1: activate FASTBOOT on eMMC
Patrick Delaunay
- [U-Boot] [PATCH 10/19] stm32mp1: support forced boot mode
Patrick Delaunay
- [U-Boot] [PATCH 11/19] stm32mp1: update memory layout
Patrick Delaunay
- [U-Boot] [PATCH 12/19] stm32mp1: activated some configuration
Patrick Delaunay
- [U-Boot] [PATCH 13/19] stm32mp1: add some syscon drivers for syscfg and etpzc
Patrick Delaunay
- [U-Boot] [PATCH 14/19] stm32mp1: add syscfg initialization
Patrick Delaunay
- [U-Boot] [PATCH 15/19] stm32mp1: align serial number on bootrom
Patrick Delaunay
- [U-Boot] [PATCH 16/19] stm32mp1: basic boot: SPL enable access to GPIOZ bank
Patrick Delaunay
- [U-Boot] [PATCH 17/19] stm32mp1: bsec: use device tree new compatible
Patrick Delaunay
- [U-Boot] [PATCH 18/19] stm32mp1: bsec: shadow all the upper OTP (no secure) during boot
Patrick Delaunay
- [U-Boot] [PATCH 19/19] stm32mp1: Replace OTP read by SHADOW read
Patrick Delaunay
- [U-Boot] [PATCH] board/freescale: Enable DHCP distro boot for Layerscape board
Yunfeng Ding
- [U-Boot] [PATCH] board/freescale: Enable DHCP distro boot for Layerscape board
Yunfeng Ding
- [U-Boot] [BUG] qemu-x86_defconfig does not build with GCC 8.1
Ayush Dosaj
- [U-Boot] [BUG] qemu-x86_defconfig does not build with GCC 8.1
Ayush Dosaj
- [U-Boot] Booting linux zImage on vexpress-a15
Liviu Dudau
- [U-Boot] Booting linux zImage on vexpress-a15
Liviu Dudau
- [U-Boot] [PATCH v3 6/9] regulator: Add support for ramp delay
Torsten Duwe
- [U-Boot] [PATCH v3 6/9] regulator: Add support for ramp delay
Torsten Duwe
- [U-Boot] [PATCH] arm: fix hvc call
Ibai Erkiaga Elorza
- [U-Boot] [PATCH] arm: fix hvc call
Ibai Erkiaga Elorza
- [U-Boot] [PATCH] arm: arm64 32bit address relocation
Ibai Erkiaga Elorza
- [U-Boot] [PATCH] arm: fix hvc call
Ibai Erkiaga
- [U-Boot] [PATCH v2] arm: fix hvc call
Ibai Erkiaga
- [U-Boot] [PATCH] dm: check OF_LIVE is enabled
Ibai Erkiaga
- [U-Boot] [PATCH] arm: arm64 32bit address relocation
Ibai Erkiaga
- [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support
Fabio Estevam
- [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support
Fabio Estevam
- [U-Boot] [PATCH v4 01/20] common: spl_fit: Fix the spl_fit_image_get_os for FIT_IMAGE_TINY
Fabio Estevam
- [U-Boot] [PATCH v4 02/20] usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE
Fabio Estevam
- [U-Boot] [PATCH v4 03/20] usb: ehci-mx6: Make regulator DM_REGULATOR dependent
Fabio Estevam
- [U-Boot] [PATCH v4 04/20] configs: imx6sabreauto: Add DM_MMC support
Fabio Estevam
- [U-Boot] [PATCH v4 05/20] configs: imx6sabreauto: Add DM_USB support
Fabio Estevam
- [U-Boot] [PATCH v4 06/20] mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds
Fabio Estevam
- [U-Boot] [PATCH v4 07/20] board: mx6sabresd: Add board_fit_config_name_match to support FIT in SPL
Fabio Estevam
- [U-Boot] [PATCH v4 08/20] board: mx6sabreauto: Add board_fit_config_name_match to support FIT in SPL
Fabio Estevam
- [U-Boot] [PATCH v4 09/20] arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files
Fabio Estevam
- [U-Boot] [PATCH v4 10/20] arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd]
Fabio Estevam
- [U-Boot] [PATCH v4 11/20] configs: mx6sabreauto: Add SPL FIT and DM support
Fabio Estevam
- [U-Boot] [PATCH v4 12/20] configs: mx6sabresd: Add SPL FIT and DM support
Fabio Estevam
- [U-Boot] [PATCH v4 13/20] mx6sabreauto: Add DM_GPIO support
Fabio Estevam
- [U-Boot] [PATCH v4 14/20] mx6sabresd: Add DM_GPIO support
Fabio Estevam
- [U-Boot] [PATCH v4 15/20] configs: mx6sabreauto: Add DM_SPI_FLASH necessary configs
Fabio Estevam
- [U-Boot] [PATCH v4 16/20] configs: mx6sabresd: Add DM_SPI_FLASH necessary configs
Fabio Estevam
- [U-Boot] [PATCH v4 17/20] board: mx6sabreauto: Remove the non-DM code
Fabio Estevam
- [U-Boot] [PATCH v4 18/20] board: mx6sabresd: Remove non-DM code
Fabio Estevam
- [U-Boot] [PATCH v4 19/20] board: mx6sabresd: Remove the enet reset gpio handling
Fabio Estevam
- [U-Boot] [PATCH v4 20/20] configs: mx6sabresd: Reduce SPL size by disabling DOS, EXT and EFI support
Fabio Estevam
- [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support
Fabio Estevam
- [U-Boot] [PATCH] imx8mq_evk_defconfig: Enable pinctrl driver
Fabio Estevam
- [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support
Fabio Estevam
- [U-Boot] [PATCH] imx8qxp: Fix the reported CPU frequency
Fabio Estevam
- [U-Boot] [PATCH] warp7: README: Adjust the binary name after DM conversion
Fabio Estevam
- [U-Boot] [PATCH v2] warp7: README: Adjust the binary name after DM conversion
Fabio Estevam
- [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support
Fabio Estevam
- [U-Boot] [RFC 1/9] Arm: dts: imx7d-pico: Import Linux pico-pi dts
Fabio Estevam
- [U-Boot] mx6cuboxi: Detecting wrong .dtb (v2019.01)
Fabio Estevam
- [U-Boot] [PATCH 1/6] pico-imx6ul: Import dts files from kernel
Fabio Estevam
- [U-Boot] [PATCH 2/6] pico-imx6ul: Select CONFIG_OF_CONTROL
Fabio Estevam
- [U-Boot] [PATCH 3/6] pico-imx6ul: Convert to DM MMC
Fabio Estevam
- [U-Boot] [PATCH 4/6] pico-imx6ul: Convert to CONFIG_DM_GPIO
Fabio Estevam
- [U-Boot] [PATCH 5/6] pico-imx6ul: Convert to DM_PMIC
Fabio Estevam
- [U-Boot] [PATCH 6/6] pico-imx6ul: README: Adjust the binary name after DM conversion
Fabio Estevam
- [U-Boot] [RFC 3/9] pico-pi-imx7d: defconfig Enable DM gpio pinctrl and pinctrl_imx7
Fabio Estevam
- [U-Boot] [RFC 4/9] arm: imx7d-pico-pi: Convert to DM MMC initialization
Fabio Estevam
- [U-Boot] [RFC 5/9] pico-pi-imx7d: defconfig: Switch to DM for I2C
Fabio Estevam
- [U-Boot] [RFC 6/9] pico-imx7d-pico: defconfig: Switch to DM for UART
Fabio Estevam
- [U-Boot] [RFC 7/9] pico-imx7d: Convert to DM PMIC
Fabio Estevam
- [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM
Fabio Estevam
- [U-Boot] [PATCH] warp7: Remove unneeded headers after DM conversion
Fabio Estevam
- [U-Boot] [RFC 4/9] arm: imx7d-pico-pi: Convert to DM MMC initialization
Fabio Estevam
- [U-Boot] [PATCH] warp7: Fix the write to the LDOGCTL PMIC register
Fabio Estevam
- [U-Boot] [PATCH 1/2] mx6ul_14x14_evk: Simplify the PMIC register writes
Fabio Estevam
- [U-Boot] [PATCH v2] mx6ul_14x14_evk: Simplify the PMIC register writes
Fabio Estevam
- [U-Boot] [PATCH v2] warp7: Fix the write to the LDOGCTL PMIC register
Fabio Estevam
- [U-Boot] [PATCH v2] warp7: README: Adjust the binary name after DM conversion
Fabio Estevam
- [U-Boot] [RFC 4/9] arm: imx7d-pico-pi: Convert to DM MMC initialization
Fabio Estevam
- [U-Boot] [RFC 4/9] arm: imx7d-pico-pi: Convert to DM MMC initialization
Fabio Estevam
- [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM
Fabio Estevam
- [U-Boot] [PATCH 6/6] doc: imx: habv4: Remove secure_boot.txt guide
Fabio Estevam
- [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM
Fabio Estevam
- [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM
Fabio Estevam
- [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM
Fabio Estevam
- [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM
Fabio Estevam
- [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM
Fabio Estevam
- [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM
Fabio Estevam
- [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM
Fabio Estevam
- [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM
Fabio Estevam
- [U-Boot] [PATCH 3/3] logos: Add the TechNexion's logo
Fabio Estevam
- [U-Boot] IMX6 DM_USB / DM_MMC requires OF_CONTROL?
Fabio Estevam
- [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM
Fabio Estevam
- [U-Boot] IMX6 DM_USB / DM_MMC requires OF_CONTROL?
Fabio Estevam
- [U-Boot] [PATCH] imx8qxp: Fix the reported CPU frequency
Fabio Estevam
- [U-Boot] i.MX6 Code Consolidation suggestion/question
Fabio Estevam
- [U-Boot] [PATCH 1/2] mx6sabresd: README: Adjust the binary name after DM conversion
Fabio Estevam
- [U-Boot] [PATCH 2/2] mx6sabreauto: README: Adjust the binary name after DM conversion
Fabio Estevam
- [U-Boot] [PATCH 2/2] imx8mq_evk/README: add missing firmware extract step
Fabio Estevam
- [U-Boot] [PATCH 1/2] imx8mq_evk/README: fix DDR training firmware path
Fabio Estevam
- [U-Boot] [PATCH 1/2] tools/imx8m_image.sh: remove bashism
Fabio Estevam
- [U-Boot] [PATCH 2/2] imx8mq_evk/README: add missing firmware extract step
Fabio Estevam
- [U-Boot] [PATCH 1/2] imx8mq_evk: Move CONFIG_ENV_IS_IN_MMC to Kconfig
Fabio Estevam
- [U-Boot] [PATCH 2/2] imx8mq_evk: Add myself as a co-maintainer
Fabio Estevam
- [U-Boot] i.MX8MQ: u-boot-spl-ddr.bin not found
Fabio Estevam
- [U-Boot] i.MX8MQ: u-boot-spl-ddr.bin not found
Fabio Estevam
- [U-Boot] [PATCH v4 19/20] board: mx6sabresd: Remove the enet reset gpio handling
Fabio Estevam
- [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM
Fabio Estevam
- [U-Boot] [PATCH 1/3] mmc: fsl_esdhc: add esdhc_imx flag
Peng Fan
- [U-Boot] [PATCH 2/3] mmc: fsl_esdhc: clean up register definition
Peng Fan
- [U-Boot] [PATCH 3/3] mmc: fsl_esdhc: clarify i.MX eSDHC specific functions
Peng Fan
- [U-Boot] [PATCH v2] mx6ul_14x14_evk: Simplify the PMIC register writes
Peng Fan
- [U-Boot] [v2, 1/3] mmc: fsl_esdhc: add esdhc_imx flag
Peng Fan
- [U-Boot] [PATCH 07/10] clk: imx8: add i.MX8QM clk driver
Peng Fan
- [U-Boot] [PATCH 1/2] mx6sabresd: README: Adjust the binary name after DM conversion
Peng Fan
- [U-Boot] [PATCH 2/2] mx6sabreauto: README: Adjust the binary name after DM conversion
Peng Fan
- [U-Boot] Nand boot on imx6q board is broken
Adam Ford
- [U-Boot] IMX6 NAND boot regression
Adam Ford
- [U-Boot] [PATCH] MTD: nand: mxs_nand: Allow driver to auto setup ECC in SPL
Adam Ford
- [U-Boot] [PATCH] MTD: mxs_nand: Fix BCH read timeout error on boards requiring ECC
Adam Ford
- [U-Boot] [PATCH] MTD: nand: mxs_nand: Allow driver to auto setup ECC in SPL
Adam Ford
- [U-Boot] [PATCH] MTD: mxs_nand: Fix BCH read timeout error on boards requiring ECC
Adam Ford
- [U-Boot] [PATCH v4 14/20] mtd: spi: Switch to new SPI NOR framework
Adam Ford
- [U-Boot] [RFC] ARM: omap3_logic_somlv: Enable OF_CONTROL in SPL
Adam Ford
- [U-Boot] [PATCH v4 14/20] mtd: spi: Switch to new SPI NOR framework
Adam Ford
- [U-Boot] [PATCH v4 14/20] mtd: spi: Switch to new SPI NOR framework
Adam Ford
- [U-Boot] [PATCH v2] of-platdata: improve documentation
Adam Ford
- [U-Boot] [PATCH] MTD: mxs_nand: Fix BCH read timeout error on boards requiring ECC
Adam Ford
- [U-Boot] [PATCH] ARM: da850evm: Increase Malloc Size
Adam Ford
- [U-Boot] [PATCH] ARM: am3517_evm: Enable Falcon Mode
Adam Ford
- [U-Boot] [PATCH] ARM: da8xxevm: Add NAND instructions for da850-evm to README
Adam Ford
- [U-Boot] [PATCH 1/2] davinci: da850evm: Move BSS to SDRAM because SRAM is full
Adam Ford
- [U-Boot] [PATCH 2/2] ARM: davinci: da850evm: Enable SPL_OF_CONTROL without PLATDATA
Adam Ford
- [U-Boot] [PATCH V2 1/2] davinci: da850evm: Move BSS to SDRAM because SRAM is full
Adam Ford
- [U-Boot] [PATCH V2 2/2] ARM: davinci: da850evm: Enable SPL_OF_CONTROL without PLATDATA
Adam Ford
- [U-Boot] [PATCH 1/2] ARM: DTS: omap3-u-boot.dtsi
Adam Ford
- [U-Boot] [PATCH 2/2] ARM: omap3_logic: Enable SPL booting device tree
Adam Ford
- [U-Boot] [PATCH] ARM: imx6_logic: Fix typo in FDT address
Adam Ford
- [U-Boot] [PATCH 1/2] ARM: DTS: omap3-u-boot.dtsi
Adam Ford
- [U-Boot] [PATCH 2/2] ARM: omap3_logic: Enable SPL booting device tree
Adam Ford
- [U-Boot] [PATCH 2/2] ARM: omap3_logic: Enable SPL booting device tree
Adam Ford
- [U-Boot] [PATCH] ARM: imx6q_logic: Enable MTD and NAND_MXS_DT
Adam Ford
- [U-Boot] [PATCH] MTD: mxs_nand_spl: Redo the way nand_init initializes
Adam Ford
- [U-Boot] IMX6 DM_USB / DM_MMC requires OF_CONTROL?
Adam Ford
- [U-Boot] [PATCH V2] ARM: davinci: da850evm: Enable SPL_OF_CONTROL without PLATDATA
Adam Ford
- [U-Boot] [PATCH] imx: serial_mxc: use CONFIG_IS_ENABLED instead of ifdef
Adam Ford
- [U-Boot] Pincontroller not getting initialized on imx6 in SPL with SPL_PINCTRL and OF_CONTROL
Adam Ford
- [U-Boot] [PATCH] arm: dts: imx6qdl-u-boot: Enable spba-bus at 2000000 simple bus
Adam Ford
- [U-Boot] Pincontroller not getting initialized on imx6 in SPL with SPL_PINCTRL and OF_CONTROL
Adam Ford
- [U-Boot] [PATCH] ARM: dts: i.MX6QDL: add missing spba-bus to aips-bus
Adam Ford
- [U-Boot] Pincontroller not getting initialized on imx6 in SPL with SPL_PINCTRL and OF_CONTROL
Adam Ford
- [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer
Adam Ford
- [U-Boot] Pincontroller not getting initialized on imx6 in SPL with SPL_PINCTRL and OF_CONTROL
Adam Ford
- [U-Boot] i.MX6 Code Consolidation suggestion/question
Adam Ford
- [U-Boot] [PATCH V3 1/2] davinci: da850evm/omapl138-lcdk: Move BSS to SDRAM because SRAM is full
Adam Ford
- [U-Boot] [PATCH V3 2/2] ARM: davinci: da850evm: Enable SPL_OF_CONTROL without PLATDATA
Adam Ford
- [U-Boot] Commit "ARM: CPU: arm926ejs: Consolidate cache routines to common file" breaks u-boot on Dreamplug
Adam Ford
- [U-Boot] Commit "ARM: CPU: arm926ejs: Consolidate cache routines to common file" breaks u-boot on Dreamplug
Adam Ford
- [U-Boot] [PATCH] treewide: Replace CONFIG_DM_SPI_FLASH with CONFIG_IS_ENABLED(DM_SPI_FLASH)
Schrempf Frieder
- [U-Boot] [RFC] efi_loader: EFI variables
Sumit Garg
- [U-Boot] [RFC] efi_loader: EFI variables
Sumit Garg
- [U-Boot] [PATCH] board: raspberrypi: add serial and revision to the device tree
Gerasimov, Anton
- [U-Boot] [PATCH v2 0/1] Pass board revision and serial number to the
Anton Gerasimov
- [U-Boot] [PATCH v2 1/1] board: raspberrypi: add serial and revision to the device tree
Anton Gerasimov
- [U-Boot] [PATCH v2 1/1] board: raspberrypi: add serial and revision to the device tree
Anton Gerasimov
- [U-Boot] In which direction should we aim so our work is going the same way as uboot?
Gervais, Francois
- [U-Boot] [PATCH] cmd/fs: fix build if CMD_BOOTEFI is not set
Gervais, Francois
- [U-Boot] [U-Boot, 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now【请注意,邮件由u-boot-bounces at lists.denx.de代发】
Simon Glass
- [U-Boot] [PATCH 1/4] dm: core: Add of_alias_get_highest_id()
Simon Glass
- [U-Boot] [RFC PATCH] dm: device: Do not probe parents which are probed already
Simon Glass
- [U-Boot] [PATCH] core: ofnode: Add ofnode_pci_get_devfn()
Simon Glass
- [U-Boot] [PATCH 3/4] i2c: dm: Record maximum id of devices before probing devices
Simon Glass
- [U-Boot] [PATCH v4] misc: fs_loader: Add support for initializing block device
Simon Glass
- [U-Boot] [PATCH 1/3] x86: Change 4-level page table base address to low memory
Simon Glass
- [U-Boot] [PATCH 2/3] x86: Don't copy the cpu_call64() function to a hardcoded address
Simon Glass
- [U-Boot] [PATCH 3/3] x86: Use the existing GDT in the ROM for 64-bit U-Boot proper
Simon Glass
- [U-Boot] [PATCH 1/2] splash: Use splashfile instead of location->name
Simon Glass
- [U-Boot] [PATCH 2/2] splash: Load internal and external data from FIT
Simon Glass
- [U-Boot] [PATCH v2 1/2] lmb: handle more than one DRAM BANK
Simon Glass
- [U-Boot] [PATCH v2 2/2] test: lib: lmb: add lmb test for multiple RAM banks
Simon Glass
- [U-Boot] [PATCH v2 0/7] Align U-Boot I2C DM bus ID handling with Linux
Simon Glass
- [U-Boot] [PATCH] initcall: Move to inline function
Simon Glass
- [U-Boot] [RFC 2/3] efi_loader: associate BLK/PARTITION device to efi_disk
Simon Glass
- [U-Boot] [PATCH v4 1/1] avb: add support for named persistent values
Simon Glass
- [U-Boot] [PATCH v2 7/7] i2c: mux: Generate longer i2c mux name
Simon Glass
- [U-Boot] [PATCH 1/2] fdt: Allow indicating a node is for U-Boot proper only
Simon Glass
- [U-Boot] [PATCH 2/2] dm: core: remove the duplicated function dm_ofnode_pre_reloc
Simon Glass
- [U-Boot] [PATCH v2 1/7] dm: core: Add of_alias_get_highest_id()
Simon Glass
- [U-Boot] [PATCH v2 4/7] dm: core: Add tests for dev_read_alias_highest_id()
Simon Glass
- [U-Boot] [PATCH v2 2/7] fdt: Introduce fdtdec_get_alias_highest_id()
Simon Glass
- [U-Boot] [PATCH v2 3/7] dm: core: Introduce dev_read_alias_highest_id()
Simon Glass
- [U-Boot] [PATCH] initcall: Move to inline function
Simon Glass
- [U-Boot] [PATCH] cros: Expand the Chromium OS documentation
Simon Glass
- [U-Boot] [PATCH v2 0/7] Align U-Boot I2C DM bus ID handling with Linux
Simon Glass
- [U-Boot] [PATCH 1/1] tpm: simplify: tpm_set_global_lock()
Simon Glass
- [U-Boot] [PATCH 00/11] sound: Add sound support for Nyan
Simon Glass
- [U-Boot] [RFC v2 00/15] dm, efi: integrate efi objects into DM
Simon Glass
- [U-Boot] [RFC v2 00/15] dm, efi: integrate efi objects into DM
Simon Glass
- [U-Boot] [RFC v2 00/15] dm, efi: integrate efi objects into DM
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] [PATCH 1/1] lib: vsprintf: avoid overflow printing UTF16 strings
Simon Glass
- [U-Boot] [RFT 4/8] regulator: Add support for ramp delay
Simon Glass
- [U-Boot] [PATCH] initcall: Move to inline function
Simon Glass
- [U-Boot] [PATCH v2 1/1] lib: vsprintf: avoid overflow printing UTF16 strings
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] [PATCH] test: fs: Add filesystem integrity checks
Simon Glass
- [U-Boot] [U-Boot, v4, 1/1] avb: add support for named persistent values
Simon Glass
- [U-Boot] [U-Boot, 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now【请注意,邮件由u-boot-bounces at lists.denx.de代发】
Simon Glass
- [U-Boot] [PATCH 00/40] x86: Add support for booting from TPL
Simon Glass
- [U-Boot] [PATCH 1/1] test: let use gdbserver for all sandbox targets
Simon Glass
- [U-Boot] [PATCH v1] dm: pinctrl: Remove obsolete function pinctrl_decode_pin_config_dm().
Simon Glass
- [U-Boot] [U-Boot, v4, 1/1] avb: add support for named persistent values
Simon Glass
- [U-Boot] [U-Boot, v4, 1/1] avb: add support for named persistent values
Simon Glass
- [U-Boot] Clock drivers for SiFive FU540
Simon Glass
- [U-Boot] [PATCH v2 7/9] power: regulator: s2mps11: Add enable delay
Simon Glass
- [U-Boot] [PATCH v1 1/2] dm: pinctrl: Avoid race condition on probe for UCLASS_PINCTRL
Simon Glass
- [U-Boot] [PATCH v1 2/2] dm: pinctrl: Skip gpio-controller node in pinconfig_post_bind()
Simon Glass
- [U-Boot] [PATCH v2 00/34] x86: Add support for sound
Simon Glass
- [U-Boot] [PATCH v2 01/34] log: Fix up Kconfig log level names
Simon Glass
- [U-Boot] [PATCH v2 02/34] log: Add a Kconfig option to set the default log level
Simon Glass
- [U-Boot] [PATCH v2 03/34] log: Add documentation for convenience functions
Simon Glass
- [U-Boot] [PATCH v2 04/34] log: Allow #define LOG_DEBUG to enable logging in a file
Simon Glass
- [U-Boot] [PATCH v2 05/34] dm: syscon: Don't require a regmap for PCI devices
Simon Glass
- [U-Boot] [PATCH v2 06/34] i2c: designware: Add error checking on init
Simon Glass
- [U-Boot] [PATCH v2 07/34] pci: Don't export pci_hose_config_device()
Simon Glass
- [U-Boot] [PATCH v2 08/34] pci: Fix comment in struct pci_child_platdata
Simon Glass
- [U-Boot] [PATCH v2 09/34] gpio: Show inactive GPIOs when explicitly requested
Simon Glass
- [U-Boot] [PATCH v2 10/34] gpio: Use case-insentive matching on the GPIO name
Simon Glass
- [U-Boot] [PATCH v2 11/34] pci: Add IDs for Intel high-definition audio
Simon Glass
- [U-Boot] [PATCH v2 12/34] sandbox: Add a note about the growing state_info struct
Simon Glass
- [U-Boot] [PATCH v2 13/34] x86: Adjust I/O macros to work on 64-bit machines
Simon Glass
- [U-Boot] [PATCH v2 14/34] x86: samus: Increase the pre-reloc memory
Simon Glass
- [U-Boot] [PATCH v2 15/34] x86: link: Increase malloc size and decrease code size
Simon Glass
- [U-Boot] [PATCH v2 16/34] x86: sandbox: pch: Add a CONFIG option for PCH
Simon Glass
- [U-Boot] [PATCH v2 17/34] sandbox: pch: Add a test for the PCH uclass
Simon Glass
- [U-Boot] [PATCH v2 18/34] pch: Add ioctl support
Simon Glass
- [U-Boot] [PATCH v2 19/34] x86: ivybridge: Add a way to get the HDA config setting
Simon Glass
- [U-Boot] [PATCH v2 20/34] sound: Mark sound_setup() as optional
Simon Glass
- [U-Boot] [PATCH v2 21/34] sound: Add uclass operations for beeping
Simon Glass
- [U-Boot] [PATCH v2 22/34] sound: Add support for Intel HDA
Simon Glass
- [U-Boot] [PATCH v2 23/34] sandbox: sound: Silence sound for testing
Simon Glass
- [U-Boot] [PATCH v2 24/34] sound: x86: link: Add sound support
Simon Glass
- [U-Boot] [PATCH v2 25/34] sound: x86: Add beeping support in i8254
Simon Glass
- [U-Boot] [PATCH v2 26/34] sound: Add a driver for the i8254 beep
Simon Glass
- [U-Boot] [PATCH v2 27/34] x86: coreboot: Enable the beeper sound driver
Simon Glass
- [U-Boot] [PATCH v2 28/34] x86: broadwell: Add support for the ADSP
Simon Glass
- [U-Boot] [PATCH v2 29/34] x86: broadwell: Don't bother probing the PCH for pinctrl
Simon Glass
- [U-Boot] [PATCH v2 30/34] x86: broadwell: Add support for serial I/O devices
Simon Glass
- [U-Boot] [PATCH v2 31/34] x86: sound: Add support for broadwell I2S
Simon Glass
- [U-Boot] [PATCH v2 32/34] sound: Add a driver for RealTek RT5677
Simon Glass
- [U-Boot] [PATCH v2 33/34] x86: sound: Add sound support for samus (broadwell)
Simon Glass
- [U-Boot] [PATCH v2 34/34] x86: Add sound support for samus
Simon Glass
- [U-Boot] [PATCH 03/33] log: Allow #define LOG_DEBUG to enable logging in a file
Simon Glass
- [U-Boot] [PATCH 22/33] sandbox: sound: Silence sound for testing
Simon Glass
- [U-Boot] [PATCH 23/33] sound: x86: link: Add sound support
Simon Glass
- [U-Boot] [PATCH 32/33] x86: sound: Add sound support for samus (broadwell)
Simon Glass
- [U-Boot] [PATCH 33/33] x86: Add sound support for samus
Simon Glass
- [U-Boot] [PATCH v5 02/15] Makefile: Fix mrproper make target
Simon Glass
- [U-Boot] [PATCH v5 10/15] clk: Add fixed-factor clock driver
Simon Glass
- [U-Boot] [PATCH 1/1] dm: scsi: report correct device number
Simon Glass
- [U-Boot] [PATCH] fs: ext4: Unmount FS in do_fs_type()
Simon Glass
- [U-Boot] [PATCH 3/4] lib: decode_timing_property should return -NOENT when proprty is not found
Simon Glass
- [U-Boot] [PATCH v2 09/34] gpio: Show inactive GPIOs when explicitly requested
Simon Glass
- [U-Boot] [PATCH v2 17/34] sandbox: pch: Add a test for the PCH uclass
Simon Glass
- [U-Boot] [PATCH] sunxi: update SATA driver to always use DM_SCSI
Simon Glass
- [U-Boot] [PATCH v2 04/13] clk: Get the CLK by index without device
Simon Glass
- [U-Boot] [PATCH v2 06/13] test/dm: clk: Add clk_get_by_index[_nodev] test
Simon Glass
- [U-Boot] [PATCH v2 07/13] reset: Get the RESET by index without device
Simon Glass
- [U-Boot] [PATCH v2 08/13] test/dm: reset: Add reset_get_by_index[_nodev] test
Simon Glass
- [U-Boot] [PATCH v2 05/13] clk: Use clk_get_by_index_tail()
Simon Glass
- [U-Boot] [PATCH] pci: Add comment to mention difference in DEVFN usage in U-Boot vs Linux
Simon Glass
- [U-Boot] [U-Boot,v2,11/23] spl: Add a comment to spl_set_bd()
Simon Glass
- [U-Boot] [PATCH v2] lib: decode_timing_property should return -NOENT when proprty is not found
Simon Glass
- [U-Boot] [PATCH] coreboot: add support fot CB_TAG_BOOT_MEDIA_PARAMS
Simon Glass
- [U-Boot] [PATCH] fastboot: common: fix default fastboot_boot on 64-bit
Simon Glass
- [U-Boot] [PATCH] arm: lib: bootm: Push the Starting kernel print to the end
Simon Glass
- [U-Boot] [PATCH] test: py: Extend fpga test with fit image with external data
Simon Glass
- [U-Boot] [PATCH] imx: serial_mxc: use CONFIG_IS_ENABLED instead of ifdef
Simon Glass
- [U-Boot] [PATCH] fdt: Fix FIT header verification in mkimage and conduct same checks as bootm
Simon Glass
- [U-Boot] [PATCH] net: eth-uclass: call stop only for active devices
Simon Glass
- [U-Boot] [PATCH v8 09/15] clk: Add fixed-factor clock driver
Simon Glass
- [U-Boot] [PATCH] arm: dts: exynos: Adjust whitespace around status property
Simon Glass
- [U-Boot] [PATCH] Convert CONFIG_IP_DEFRAG to Kconfig
Christian Gmeiner
- [U-Boot] [PATCH] coreboot: add support fot CB_TAG_BOOT_MEDIA_PARAMS
Christian Gmeiner
- [U-Boot] [PATCH] coreboot: add support fot CB_TAG_BOOT_MEDIA_PARAMS
Christian Gmeiner
- [U-Boot] [PATCH] sf: prevent clean_bar overwriting error codes
Simon Goldschmidt
- [U-Boot] [PATCH v2] spl: implement CRC check on U-Boot uImage
Simon Goldschmidt
- [U-Boot] [PATCH v1 0/4] arm: socfgpa: support of-platdata
Simon Goldschmidt
- [U-Boot] [PATCH v2 1/2] lmb: handle more than one DRAM BANK
Simon Goldschmidt
- [U-Boot] [PATCH v2 2/2] test: lib: lmb: add lmb test for multiple RAM banks
Simon Goldschmidt
- [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support
Simon Goldschmidt
- [U-Boot] [PATCH v4 00/20] SF: Migrate to Linux SPI NOR framework
Simon Goldschmidt
- [U-Boot] [PATCH] arm: socfpga: move gen5 SDR driver to DM
Simon Goldschmidt
- [U-Boot] [PATCH] arm: socfpga: move gen5 SDR driver to DM
Simon Goldschmidt
- [U-Boot] [U-Boot,v2] spl: implement CRC check on U-Boot uImage
Simon Goldschmidt
- [U-Boot] [PATCH] arm: socfpga: move gen5 SDR driver to DM
Simon Goldschmidt
- [U-Boot] [U-Boot,v2] spl: implement CRC check on U-Boot uImage
Simon Goldschmidt
- [U-Boot] [U-Boot,v2] spl: implement CRC check on U-Boot uImage
Simon Goldschmidt
- [U-Boot] [PATCH v3] spl: implement CRC check on U-Boot uImage
Simon Goldschmidt
- [U-Boot] [PATCH] arm: socfpga: move gen5 SDR driver to DM
Simon Goldschmidt
- [U-Boot] [PATCH 1/1] test: call hexdump tests via `ut lib`
Simon Goldschmidt
- [U-Boot] [PATCH] test: call lmb tests vi 'ut lib'
Simon Goldschmidt
- [U-Boot] [U-Boot,v2,11/23] spl: Add a comment to spl_set_bd()
Simon Goldschmidt
- [U-Boot] [PATCH] test: call lmb tests vi 'ut lib'
Simon Goldschmidt
- [U-Boot] [RFC 1/1] configs: rk3288: SPL file must fit into 32 KiB
Simon Goldschmidt
- [U-Boot] [RFC 1/1] configs: rk3288: SPL file must fit into 32 KiB
Simon Goldschmidt
- [U-Boot] [PATCH] arm: socfpga: move gen5 SDR driver to DM
Simon Goldschmidt
- [U-Boot] [PATCH v2 1/1] configs: rk3288: Tinker Board SPL file must fit into 32 KiB
Simon Goldschmidt
- [U-Boot] [PATCH v3 1/1] configs: rk3288: Tinker Board SPL file must fit into 32 KiB
Simon Goldschmidt
- [U-Boot] [PATCH] arm: socfpga: move gen5 SDR driver to DM
Simon Goldschmidt
- [U-Boot] configs: move CONFIG_SPL_TEXT_BASE to Kconfig
Simon Goldschmidt
- [U-Boot] [PATCH 2/2] ARM: omap3_logic: Enable SPL booting device tree
Simon Goldschmidt
- [U-Boot] [PATCH] ARM: cache: Fix incorrect bitwise operation
Simon Goldschmidt
- [U-Boot] [PATCH] ARM: socfpga: Configure PL310 latencies
Simon Goldschmidt
- [U-Boot] [PATCH] ARM: socfpga: Clear PL310 early in SPL
Simon Goldschmidt
- [U-Boot] [PATCH] ARM: socfpga: Clear PL310 early in SPL
Simon Goldschmidt
- [U-Boot] [PATCH] ARM: socfpga: Clear PL310 early in SPL
Simon Goldschmidt
- [U-Boot] [PATCH] ARM: socfpga: Clear PL310 early in SPL
Simon Goldschmidt
- [U-Boot] [PATCH] ARM: socfpga: Clear PL310 early in SPL
Simon Goldschmidt
- [U-Boot] [PATCH] ARM: socfpga: Clear PL310 early in SPL
Simon Goldschmidt
- [U-Boot] [U-Boot,v2,11/23] spl: Add a comment to spl_set_bd()
Simon Goldschmidt
- [U-Boot] [PATCH V2] ARM: socfpga: Clear PL310 early in SPL
Simon Goldschmidt
- [U-Boot] [PATCH v2 0/8] arm: socfpga: implement proper peripheral reset handling
Simon Goldschmidt
- [U-Boot] [PATCH v2 1/8] arm: socfpga: gen5: sync devicetrees to Linux
Simon Goldschmidt
- [U-Boot] [PATCH v2 2/8] arm: socfpga: gen5: add reset & sdr node to SPL devicetrees
Simon Goldschmidt
- [U-Boot] [PATCH v2 3/8] arm: socfpga: move gen5 SDR driver to DM
Simon Goldschmidt
- [U-Boot] [PATCH v2 4/8] mtd: rawnand: denali: add reset handling
Simon Goldschmidt
- [U-Boot] [PATCH v2 5/8] spi: cadence_qspi: add reset handling
Simon Goldschmidt
- [U-Boot] [PATCH v2 6/8] reset: socfpga: add reset handling for old kernels
Simon Goldschmidt
- [U-Boot] [PATCH v2 7/8] arm: socfpga: gen5: deassert peripheral reset by default
Simon Goldschmidt
- [U-Boot] [PATCH v2 8/8] arm: socfpga: implement proper peripheral reset
Simon Goldschmidt
- [U-Boot] [PATCH v2 1/8] arm: socfpga: gen5: sync devicetrees to Linux
Simon Goldschmidt
- [U-Boot] [PATCH v2 2/8] arm: socfpga: gen5: add reset & sdr node to SPL devicetrees
Simon Goldschmidt
- [U-Boot] [PATCH v2 5/8] spi: cadence_qspi: add reset handling
Simon Goldschmidt
- [U-Boot] [PATCH v2 6/8] reset: socfpga: add reset handling for old kernels
Simon Goldschmidt
- [U-Boot] [PATCH v2 7/8] arm: socfpga: gen5: deassert peripheral reset by default
Simon Goldschmidt
- [U-Boot] [PATCH v2 2/8] arm: socfpga: gen5: add reset & sdr node to SPL devicetrees
Simon Goldschmidt
- [U-Boot] [PATCH v2 7/8] arm: socfpga: gen5: deassert peripheral reset by default
Simon Goldschmidt
- [U-Boot] [PATCH v2 6/8] reset: socfpga: add reset handling for old kernels
Simon Goldschmidt
- [U-Boot] [PATCH v2 5/8] spi: cadence_qspi: add reset handling
Simon Goldschmidt
- [U-Boot] [PATCH v2 2/8] arm: socfpga: gen5: add reset & sdr node to SPL devicetrees
Simon Goldschmidt
- [U-Boot] [PATCH v2 8/8] arm: socfpga: implement proper peripheral reset
Simon Goldschmidt
- [U-Boot] [PATCH v2 8/8] arm: socfpga: implement proper peripheral reset
Simon Goldschmidt
- [U-Boot] [PATCH v2 2/8] arm: socfpga: gen5: add reset & sdr node to SPL devicetrees
Simon Goldschmidt
- [U-Boot] [PATCH v2 2/8] arm: socfpga: gen5: add reset & sdr node to SPL devicetrees
Simon Goldschmidt
- [U-Boot] [PATCH v2 8/8] arm: socfpga: implement proper peripheral reset
Simon Goldschmidt
- [U-Boot] [PATCH v2 8/8] arm: socfpga: implement proper peripheral reset
Simon Goldschmidt
- [U-Boot] [PATCH v2 8/8] arm: socfpga: implement proper peripheral reset
Simon Goldschmidt
- [U-Boot] [PATCH v3 0/8] arm: socfpga: implement proper peripheral reset handling
Simon Goldschmidt
- [U-Boot] [PATCH v3 1/8] arm: socfpga: gen5: sync devicetrees to Linux
Simon Goldschmidt
- [U-Boot] [PATCH v3 2/8] arm: socfpga: gen5: add reset & sdr node to SPL devicetrees
Simon Goldschmidt
- [U-Boot] [PATCH v3 3/8] arm: socfpga: gen5: deassert peripheral reset by default
Simon Goldschmidt
- [U-Boot] [PATCH v3 4/8] reset: socfpga: add reset handling for old kernels
Simon Goldschmidt
- [U-Boot] [PATCH v3 5/8] arm: socfpga: move gen5 SDR driver to DM
Simon Goldschmidt
- [U-Boot] [PATCH v3 6/8] mtd: rawnand: denali: add reset handling
Simon Goldschmidt
- [U-Boot] [PATCH v3 7/8] spi: cadence_qspi: add reset handling
Simon Goldschmidt
- [U-Boot] [PATCH v3 8/8] arm: socfpga: implement proper peripheral reset
Simon Goldschmidt
- [U-Boot] [PATCH] spl: add debug print for early malloc usage
Simon Goldschmidt
- [U-Boot] [PATCH v3 1/1] configs: rk3288: Tinker Board SPL file must fit into 32 KiB
Simon Goldschmidt
- [U-Boot] [PATCH 5/7] Convert CONFIG_SF_DEFAULT_* to Kconfig
Simon Goldschmidt
- [U-Boot] [PATCH v3 1/1] configs: rk3288: Tinker Board SPL file must fit into 32 KiB
Simon Goldschmidt
- [U-Boot] [PATCH 1/3] arm: socfpga: fix comment about SPL memory layout
Simon Goldschmidt
- [U-Boot] [PATCH 2/3] arm: socfpga: a10: move SPL stack size to Kconfig
Simon Goldschmidt
- [U-Boot] [PATCH 3/3] arm: socfpga: put initial U-Boot stack into DDR
Simon Goldschmidt
- [U-Boot] [PATCH 1/3] x86: Change 4-level page table base address to low memory
Alexander Graf
- [U-Boot] [PATCH 1/3] x86: Change 4-level page table base address to low memory
Alexander Graf
- [U-Boot] [PATCH] initcall: Move to inline function
Alexander Graf
- [U-Boot] [PATCH] initcall: Move to inline function
Alexander Graf
- [U-Boot] [PATCH] initcall: Move to inline function
Alexander Graf
- [U-Boot] [PATCH] arm: Leave smccc calls in .text when efi_loader=n
Alexander Graf
- [U-Boot] [PATCH] efi_loader: Do not expose HII protocols yet
Alexander Graf
- [U-Boot] [U-Boot, v3, 1/5] efi_loader: Initial HII database protocols
Alexander Graf
- [U-Boot] [PATCH v2] efi_loader: Do not expose HII protocols yet
Alexander Graf
- [U-Boot] [PATCH v3] efi_loader: Make HII a config option
Alexander Graf
- [U-Boot] [PATCH 1/1] efi_loader: fix EFI entry counting
Alexander Graf
- [U-Boot] [PATCH v7 00/15] SiFive FU540 Support
Alexander Graf
- [U-Boot] [PATCH v7 00/15] SiFive FU540 Support
Alexander Graf
- [U-Boot] [RFC] Reserve ATF memory on Marvell Armdada 3700/7K/8K
Alexander Graf
- [U-Boot] [RFC] efi_loader: EFI variables
Alexander Graf
- [U-Boot] [PATCH v7 00/15] SiFive FU540 Support
Alexander Graf
- [U-Boot] [RFC] efi_loader: EFI variables
Alexander Graf
- [U-Boot] [PATCH v7 00/15] SiFive FU540 Support
Alexander Graf
- [U-Boot] [PULL] efi patch queue 2019-02-13
Alexander Graf
- [U-Boot] [PATCH] arm64: zynqmp: Create fdtfile from compatible string
Alexander Graf
- [U-Boot] [PATCH] arm64: zynqmp: Create fdtfile from compatible string
Alexander Graf
- [U-Boot] [PATCH v2] arm64: zynqmp: Create fdtfile from compatible string
Alexander Graf
- [U-Boot] [PATCH 1/1] efi_selftest: do not use efi_free_pool()
Alexander Graf
- [U-Boot] [PATCH 1/1] efi_selftest: fix memory allocation in HII tests
Alexander Graf
- [U-Boot] [PATCH] efi_loader: Swap roles with Heinrich
Alexander Graf
- [U-Boot] [PATCH] rpi: Make Matthias maintainer
Alexander Graf
- [U-Boot] [PATCH v2] rpi: add Compute Module 3+
Alexander Graf
- [U-Boot] [PATCH] arm: fix hvc call
Alexander Graf
- [U-Boot] [PATCH] arm: fix hvc call
Alexander Graf
- [U-Boot] [RESEND PATCH 1/3] arm: clean up asm/io.h
Alexander Graf
- [U-Boot] [RESEND PATCH 2/3] arm: introduce _relaxed MMIO accessors
Alexander Graf
- [U-Boot] [RESEND PATCH 3/3] sunxi: H6: use writel_relaxed for DRAM timing register accesses
Alexander Graf
- [U-Boot] ARMv8 linking: how to properly accommodate the exception vector table?
Alexander Graf
- [U-Boot] [PATCH v2 1/1] board: raspberrypi: add serial and revision to the device tree
Alexander Graf
- [U-Boot] ARMv8 linking: how to properly accommodate the exception vector table?
Alexander Graf
- [U-Boot] [PATCH] armv8: Disable exception vectors in SPL by default
Alexander Graf
- [U-Boot] ARMv8 linking: how to properly accommodate the exception vector table?
Alexander Graf
- [U-Boot] [PATCH] armv8: Disable exception vectors in SPL by default
Alexander Graf
- [U-Boot] [PATCH v2] armv8: Disable exception vectors in SPL by default
Alexander Graf
- [U-Boot] [PATCH v2 1/1] board: raspberrypi: add serial and revision to the device tree
Alexander Graf
- [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer
Alexander Graf
- [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer
Alexander Graf
- [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer
Alexander Graf
- [U-Boot] [RFC 1/1] efi_loader: in situ relocation
Alexander Graf
- [U-Boot] [PATCH 2/9] Makefile: use "arm64" architecture for U-Boot image files
Alexander Graf
- [U-Boot] [PATCH 3/9] SPL: read and store arch property from U-Boot image
Alexander Graf
- [U-Boot] [PATCH 4/9] sunxi: introduce RMR switch to enter payloads in 64-bit mode
Alexander Graf
- [U-Boot] [PATCH 4/9] sunxi: introduce RMR switch to enter payloads in 64-bit mode
Alexander Graf
- [U-Boot] [PATCH 5/9] sunxi: allow FIT image for 32-bit builds as well
Alexander Graf
- [U-Boot] [PATCH 6/9] sunxi: allow 32-bit builds for 64-bit SoCs
Alexander Graf
- [U-Boot] [PATCH 3/9] SPL: read and store arch property from U-Boot image
Alexander Graf
- [U-Boot] [PATCH 1/1] efi_loader: do not add \ in efi_fs_from_name()
Alexander Graf
- [U-Boot] FEC and EFI Simple Network
Alexander Graf
- [U-Boot] [PATCH 5/9] sunxi: allow FIT image for 32-bit builds as well
Alexander Graf
- [U-Boot] [RFC 01/22] arm: introduce ARCH_THUNDERX
Alexander Graf
- [U-Boot] [RFC 01/22] arm: introduce ARCH_THUNDERX
Alexander Graf
- [U-Boot] [RFC 02/22] arm: add thunderx_81xx
Alexander Graf
- [U-Boot] [RFC 03/22] thunderx: add FDT support
Alexander Graf
- [U-Boot] [RFC 04/22] thunderx: add thunderx register definitions and misc functions
Alexander Graf
- [U-Boot] [PATCH 1/1] efi_loader: do not add \ in efi_fs_from_name()
Alexander Graf
- [U-Boot] [PATCH v2] arm: fix hvc call
Alexander Graf
- [U-Boot] [U-Boot, 2/3] net: add higmacv300 Ethernet driver for HiSilicon platform
Shawn Guo
- [U-Boot] [PATCH 2/3] net: add higmacv300 Ethernet driver for HiSilicon platform
Shawn Guo
- [U-Boot] [PATCH v2 0/3] Add Ethernet support for Poplar board
Shawn Guo
- [U-Boot] [PATCH v2 1/3] reset: add reset driver for HiSilicon platform
Shawn Guo
- [U-Boot] [PATCH v2 2/3] net: add higmacv300 Ethernet driver for HiSilicon platform
Shawn Guo
- [U-Boot] [PATCH v2 3/3] poplar: enable Ethernet driver support
Shawn Guo
- [U-Boot] [PATCH] Support boot Android image without address on bootm command
Shawn Guo
- [U-Boot] [PATCH 1/3] videomodes: Allow EDID timings where hsync/vsync pulse is 0
Anatolij Gustschin
- [U-Boot] [PATCH 2/3] sunxi: display: Move DDC PLL setup to HDMI init
Anatolij Gustschin
- [U-Boot] [PATCH 3/3] sunxi: display: Implement fallback to ddc probe when hpd fails
Anatolij Gustschin
- [U-Boot] Please pull u-boot-video
Anatolij Gustschin
- [U-Boot] iMX8QXP MEK: no ethernet
Anatolij Gustschin
- [U-Boot] [PATCH] fdt: Fix FIT header verification in mkimage and conduct same checks as bootm V2
Jordan Hand
- [U-Boot] [PATCH v2] fdt: Fix FIT header verification in mkimage and conduct same checks as bootm
Jordan Hand
- [U-Boot] [PATCH v2] fs: fat: fix reading non-cluster-aligned root directory
Anssi Hannula
- [U-Boot] IMX6 NAND boot regression
Tim Harvey
- [U-Boot] IMX6 NAND boot regression
Tim Harvey
- [U-Boot] [PATCH] MTD: mxs_nand: Fix BCH read timeout error on boards requiring ECC
Tim Harvey
- [U-Boot] [PATCH] MTD: nand: mxs_nand: Allow driver to auto setup ECC in SPL
Tim Harvey
- [U-Boot] [PATCH] net: mv88e61xx: fix autonegotiation on ports
Tim Harvey
- [U-Boot] [PATCH 00/14] Gateworks Ventana updates
Tim Harvey
- [U-Boot] [PATCH 01/14] imx: ventana: mv88e61xx change LED configuration
Tim Harvey
- [U-Boot] [PATCH 02/14] imx: ventana: do not iomux UART1
Tim Harvey
- [U-Boot] [PATCH 03/14] imx: ventana: remove setup of I2C3 from SPL
Tim Harvey
- [U-Boot] [PATCH 04/14] imx: ventana: add support for GW5905
Tim Harvey
- [U-Boot] [PATCH 05/14] imx: ventana: add support for Z101WX01 LVDS display
Tim Harvey
- [U-Boot] [PATCH 06/14] imx: ventana: skip nand init for nandless boards
Tim Harvey
- [U-Boot] [PATCH 07/14] imx: ventana: add i2c detect for all LVDS displays
Tim Harvey
- [U-Boot] [PATCH 08/14] imx: ventana: add support for GW5906
Tim Harvey
- [U-Boot] [PATCH 09/14] imx: ventana: add support for GW5907
Tim Harvey
- [U-Boot] [PATCH 10/14] imx: ventana: add support for GW5908
Tim Harvey
- [U-Boot] [PATCH 11/14] imx: ventana: add support for GW5909
Tim Harvey
- [U-Boot] [PATCH 12/14] imx: ventana: add support for GW5901/GW5902
Tim Harvey
- [U-Boot] [PATCH 13/14] imx: ventana: gw5904/gw5909: disable RS485
Tim Harvey
- [U-Boot] [PATCH 14/14] imx: ventana: fix usage of dt paths with leading 0s (Linux 4.15+)
Tim Harvey
- [U-Boot] env: Support multiple environments with varied size/offset/redund
Tim Harvey
- [U-Boot] IMX6 DM_USB / DM_MMC requires OF_CONTROL?
Tim Harvey
- [U-Boot] IMX6 DM_USB / DM_MMC requires OF_CONTROL?
Tim Harvey
- [U-Boot] [PATCH] imx: ventana: hexdump invalid EEPROM data
Tim Harvey
- [U-Boot] [PATCH] imx: ventana: added support for 16bit 8Gb density (1GiB) DRAM
Tim Harvey
- [U-Boot] IMX6 DM_USB / DM_MMC requires OF_CONTROL?
Tim Harvey
- [U-Boot] [RFC 00/22] Add support for Cavium Octeon-TX CN80XX/CN81XX
Tim Harvey
- [U-Boot] [RFC 01/22] arm: introduce ARCH_THUNDERX
Tim Harvey
- [U-Boot] [RFC 02/22] arm: add thunderx_81xx
Tim Harvey
- [U-Boot] [RFC 03/22] thunderx: add FDT support
Tim Harvey
- [U-Boot] [RFC 04/22] thunderx: add thunderx register definitions and misc functions
Tim Harvey
- [U-Boot] [RFC 05/22] thunderx: move DRAM prints to debug
Tim Harvey
- [U-Boot] [RFC 06/22] dm: pci: add PCI SR-IOV EA support
Tim Harvey
- [U-Boot] [RFC 07/22] fdt: add fdtdec_get_pci_bus_range
Tim Harvey
- [U-Boot] [RFC 08/22] pci: add thunderx pci/ecam driver
Tim Harvey
- [U-Boot] [RFC 09/22] pci: fix pce enumeration on thunderx
Tim Harvey
- [U-Boot] [RFC 10/22] arm: include 64bit io accessors
Tim Harvey
- [U-Boot] [RFC 11/22] gpio: add thunderx gpio driver
Tim Harvey
- [U-Boot] [RFC 12/22] i2c: add thunderx I2C driver
Tim Harvey
- [U-Boot] [RFC 13/22] spi: add thunderx SPI driver
Tim Harvey
- [U-Boot] [RFC 14/22] xhci: add support for cavium thunderx XHCI
Tim Harvey
- [U-Boot] [RFC 15/22] thunderx_81xx: add support for XHCI
Tim Harvey
- [U-Boot] [RFC 16/22] thunderx_81xx: enable usb mass storage and usb ethernet
Tim Harvey
- [U-Boot] [RFC 17/22] ahci: support 64bit systems
Tim Harvey
- [U-Boot] [RFC 18/22] ahci: set n_ports from host caps
Tim Harvey
- [U-Boot] [RFC 19/22] ahci: add support for ThunderX AHCI
Tim Harvey
- [U-Boot] [RFC 20/22] thunderx_81xx: add AHCI support
Tim Harvey
- [U-Boot] [RFC 21/22] net: add thunderx vnic drivers
Tim Harvey
- [U-Boot] [RFC 22/22] pci: auto probe thunderx NIC devices
Tim Harvey
- [U-Boot] [PATCH v4 3/3] cmd: mdio: Add new parameter to access MMD PHY registers
Joe Hershberger
- [U-Boot] [PATCH v3 2/6] net: phy: ar803x: Make RGMII Tx delays actually configurable for AR8035
Joe Hershberger
- [U-Boot] [PATCH v3 3/6] net: phy: ar803x: Use common functions for RGMII internal delays
Joe Hershberger
- [U-Boot] [PATCH v3 4/6] net: phy: ar803x: Explicitly disable RGMII delays
Joe Hershberger
- [U-Boot] [PATCH v3 5/6] net: phy: ar803x: Clarify the configuration of the CLK_25M output pin
Joe Hershberger
- [U-Boot] [PATCH v3 6/6] net: phy: ar803x: Clarify the intention of ar8021_config
Joe Hershberger
- [U-Boot] [PATCH 2/3] net: add higmacv300 Ethernet driver for HiSilicon platform
Joe Hershberger
- [U-Boot] [PATCH v4 3/3] cmd: mdio: Add new parameter to access MMD PHY registers
Joe Hershberger
- [U-Boot] [PATCH v4 3/3] cmd: mdio: Add new parameter to access MMD PHY registers
Joe Hershberger
- [U-Boot] [PATCH v4 3/3] cmd: mdio: Add new parameter to access MMD PHY registers
Joe Hershberger
- [U-Boot] [PATCH] drivers: net: ldpaa_eth: fix resource leak
Joe Hershberger
- [U-Boot] [PATCH v5 3/3] cmd: mdio: Switch to generic helpers when accessing the registers
Joe Hershberger
- [U-Boot] [PATCH v5 1/3] net: phy: Add generic helpers to access MMD PHY registers
Joe Hershberger
- [U-Boot] [PATCH v9 06/15] net: macb: Fix clk API usage for RISC-V systems
Joe Hershberger
- [U-Boot] [PATCH] net: eth-uclass: call stop only for active devices
Joe Hershberger
- [U-Boot] [PATCH] net: eth-uclass: call stop only for active devices
Joe Hershberger
- [U-Boot] [PATCH v3 1/7] ARM: k2g-ice: Add pinmux support for rgmii interface
Joe Hershberger
- [U-Boot] [PATCH v3 2/7] ARM: k2g-gp-evm: update to rgmii pinmux configuration
Joe Hershberger
- [U-Boot] [PATCH v3 3/7] net: netcp: add support for phy with rgmii ids
Joe Hershberger
- [U-Boot] [PATCH v3 4/7] ARM: k2g: add a workaround to reset the phy
Joe Hershberger
- [U-Boot] [PATCH v3 1/7] ARM: k2g-ice: Add pinmux support for rgmii interface
Joe Hershberger
- [U-Boot] [PATCH v3 7/7] ARM: dts: k2g-ice: add dt node for netcp
Joe Hershberger
- [U-Boot] [PATCH v3 6/7] k2g: config enable ti phy dp83867 for k2g
Joe Hershberger
- [U-Boot] [PATCH v3 5/7] ARM: dts: k2g-evm: remove unused phy-mode property from phy node
Joe Hershberger
- [U-Boot] [PATCH v4 0/7] Add netcp networking support on K2G ICE EVM
Joe Hershberger
- [U-Boot] [PATCH v4 1/7] ARM: k2g-gp-evm: update to rgmii pinmux configuration
Joe Hershberger
- [U-Boot] [PATCH v2 0/7] Add support for symlink creation in EXT4
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 1/7] fs: ext4: do not allow writes if metadata checksum is active
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 2/7] test: fs: disable the metadata checksums on ext4 filesystems
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 3/7] test: fs: run fsck after on fs image after the tests are run
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 4/7] fs: ext4: constify the buffer passed to write functions
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 5/7] fs: ext4: Add support for the creation of symbolic links
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 6/7] fs: Add a new command to create symbolic links
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 7/7] test: fs: Added tests for symlinks
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 3/7] test: fs: run fsck after on fs image after the tests are run
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 3/7] test: fs: run fsck after on fs image after the tests are run
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 0/6] Add support for symlink creation in EXT4
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 1/6] fs: ext4: do not allow writes if metadata checksum is active
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 2/6] test: fs: disable the metadata checksums on ext4 filesystems
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 3/6] fs: ext4: constify the buffer passed to write functions
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 4/6] fs: ext4: Add support for the creation of symbolic links
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 5/6] fs: Add a new command to create symbolic links
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 6/6] test: fs: Added tests for symlinks
Jean-Jacques Hiblot
- [U-Boot] [PATCH v4 0/6] Add support for symlink creation in EXT4
Jean-Jacques Hiblot
- [U-Boot] [PATCH v4 1/6] fs: ext4: do not allow writes if metadata checksum is active
Jean-Jacques Hiblot
- [U-Boot] [PATCH v4 2/6] test: fs: disable the metadata checksums on ext4 filesystems
Jean-Jacques Hiblot
- [U-Boot] [PATCH v4 3/6] fs: ext4: constify the buffer passed to write functions
Jean-Jacques Hiblot
- [U-Boot] [PATCH v4 4/6] fs: ext4: Add support for the creation of symbolic links
Jean-Jacques Hiblot
- [U-Boot] [PATCH v4 5/6] fs: Add a new command to create symbolic links
Jean-Jacques Hiblot
- [U-Boot] [PATCH v4 6/6] test: fs: Added tests for symlinks
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 3/6] fs: ext4: constify the buffer passed to write functions
Jean-Jacques Hiblot
- [U-Boot] [PATCH] test: fs: Add filesystem integrity checks
Jean-Jacques Hiblot
- [U-Boot] [PATCH] test: fs: Add filesystem integrity checks
Jean-Jacques Hiblot
- [U-Boot] [PATCH] mmc: Do not poll using CMD13 when changing timing
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 1/2] configs: k2g_evm: Enable CONFIG_BLK
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 2/2] configs: Enable CONFIG_BLK in am57xx_evm and am57xx_hs_evm
Jean-Jacques Hiblot
- [U-Boot] [PATCH] test: fs: Add filesystem integrity checks
Jean-Jacques Hiblot
- [U-Boot] [PATCH v5 0/7] Add support for symlink creation in EXT4
Jean-Jacques Hiblot
- [U-Boot] [PATCH v5 1/7] fs: ext4: do not allow writes if metadata checksum is active
Jean-Jacques Hiblot
- [U-Boot] [PATCH v5 2/7] test: fs: disable the metadata checksums on ext4 filesystems
Jean-Jacques Hiblot
- [U-Boot] [PATCH v5 3/7] test: fs: Add filesystem integrity checks
Jean-Jacques Hiblot
- [U-Boot] [PATCH v5 4/7] fs: ext4: constify the buffer passed to write functions
Jean-Jacques Hiblot
- [U-Boot] [PATCH v5 5/7] fs: ext4: Add support for the creation of symbolic links
Jean-Jacques Hiblot
- [U-Boot] [PATCH v5 6/7] fs: Add a new command to create symbolic links
Jean-Jacques Hiblot
- [U-Boot] [PATCH v5 7/7] test: fs: Added tests for symlinks
Jean-Jacques Hiblot
- [U-Boot] [PATCH v5 0/7] Add support for symlink creation in EXT4
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v5 0/7] Add support for symlink creation in EXT4
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v5 1/7] fs: ext4: do not allow writes if metadata checksum is active
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v5 2/7] test: fs: disable the metadata checksums on ext4 filesystems
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v5 3/7] test: fs: Add filesystem integrity checks
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v5 4/7] fs: ext4: constify the buffer passed to write functions
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v5 5/7] fs: ext4: Add support for the creation of symbolic links
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v5 6/7] fs: Add a new command to create symbolic links
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v5 7/7] test: fs: Added tests for symlinks
Jean-Jacques Hiblot
- [U-Boot] [PATCH 15/33] x86: sandbox: pch: Add a CONFIG option for PCH
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 1/7] fs: ext4: do not allow writes if metadata checksum is active
Jean-Jacques Hiblot
- [U-Boot] [PATCH v7 14/15] doc: Add a readme guide for SiFive FU540
Kevin Hilman
- [U-Boot] [PATCH v7 14/15] doc: Add a readme guide for SiFive FU540
Kevin Hilman
- [U-Boot] [PATCH v7 00/15] SiFive FU540 Support
Kevin Hilman
- [U-Boot] [PATCH v7 00/15] SiFive FU540 Support
Kevin Hilman
- [U-Boot] [PATCH 1/8] armv8: fsl-layerscpae: correct the PCIe controllers' region size
Z.q. Hou
- [U-Boot] [PATCHv3 08/11] armv8: lx2160a: enable the pci command
Z.q. Hou
- [U-Boot] [PATCHv3 10/11] pci: ls_pcie_g4: Add Workaround for A-011451
Z.q. Hou
- [U-Boot] [PATCHv3 10/11] pci: ls_pcie_g4: Add Workaround for A-011451
Z.q. Hou
- [U-Boot] [PATCHv3 10/11] pci: ls_pcie_g4: Add Workaround for A-011451
Z.q. Hou
- [U-Boot] [PATCHv3 10/11] pci: ls_pcie_g4: Add Workaround for A-011451
Z.q. Hou
- [U-Boot] [PATCH 00/11] sound: Add sound support for Nyan
Jon Hunter
- [U-Boot] [PATCH] ARM: tegra: Reserve 32MB for the Linux kernel
Jon Hunter
- [U-Boot] [PATCH] board/lx2160a: Add init_func_vid() definition
Priyanka Jain
- [U-Boot] [PATCH][v3] board/lx2160ardb: Add distro boot support
Priyanka Jain
- [U-Boot] [PATCH 1/4] sunxi: Fix build when CONFIG_CMD_NET is disabled
Ondřej Jirman
- [U-Boot] [PATCH 3/4] lib: decode_timing_property should return -NOENT when proprty is not found
Ondřej Jirman
- [U-Boot] [PATCH 0/2] Load splash from FIT image (internal, external, offset)
Mark Jonas
- [U-Boot] [PATCH 1/2] splash: Use splashfile instead of location->name
Mark Jonas
- [U-Boot] [PATCH 2/2] splash: Load internal and external data from FIT
Mark Jonas
- [U-Boot] [PATCH v2 0/2] Load splash from FIT image (internal, external, offset)
Mark Jonas
- [U-Boot] [PATCH v2 1/2] splash: Use splashfile instead of location->name
Mark Jonas
- [U-Boot] [PATCH v2 2/2] splash: Load internal and external data from FIT
Mark Jonas
- [U-Boot] [PATCH v3 0/2] Load splash from FIT image (internal, external, offset)
Mark Jonas
- [U-Boot] [PATCH v3 1/2] splash: Use splashfile instead of location->name
Mark Jonas
- [U-Boot] [PATCH v3 2/2] splash: Load internal and external data from FIT
Mark Jonas
- [U-Boot] [RFC 4/9] arm: imx7d-pico-pi: Convert to DM MMC initialization
Offouga Joris
- [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM
Offouga Joris
- [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM
Offouga Joris
- [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM
Offouga Joris
- [U-Boot] rpi: bcm2835_sdhost: occasional errors while writing
Zubair Lutfullah Kakakhel
- [U-Boot] [RFT 1/8] exynos: Redo detection of revision when all resources are ready
Minkyu Kang
- [U-Boot] [PATCH] cmd: date: Do not overwrite arguments
Roman Kapl
- [U-Boot] [PATCH 0/7] Add netcp networking support on K2G ICE EVM
Murali Karicheri
- [U-Boot] [PATCH 1/7] ARM: k2g-ice: Add pinmux support for rgmii interface
Murali Karicheri
- [U-Boot] [PATCH 2/7] ARM: k2g-gp-evm: update to rgmii pinmux configuration
Murali Karicheri
- [U-Boot] [PATCH 3/7] net: netcp: add support for phy with rgmii ids
Murali Karicheri
- [U-Boot] [PATCH 4/7] ARM: k2g: add a workaround to reset the phy
Murali Karicheri
- [U-Boot] [PATCH 5/7] k2g: config enable ti phy dp83867 for k2g
Murali Karicheri
- [U-Boot] [PATCH 6/7] ARM: dts: k2g-evm: remove unused phy-mode property from phy node
Murali Karicheri
- [U-Boot] [PATCH 7/7] ARM: dts: k2g-ice: add dt node for netcp
Murali Karicheri
- [U-Boot] [PATCH 0/7] Add netcp networking support on K2G ICE EVM
Murali Karicheri
- [U-Boot] [PATCH 1/7] ARM: k2g-ice: Add pinmux support for rgmii interface
Murali Karicheri
- [U-Boot] [PATCH 2/7] ARM: k2g-gp-evm: update to rgmii pinmux configuration
Murali Karicheri
- [U-Boot] [PATCH 3/7] net: netcp: add support for phy with rgmii ids
Murali Karicheri
- [U-Boot] [PATCH 4/7] ARM: k2g: add a workaround to reset the phy
Murali Karicheri
- [U-Boot] [PATCH 5/7] k2g: config enable ti phy dp83867 for k2g
Murali Karicheri
- [U-Boot] [PATCH 6/7] ARM: dts: k2g-evm: remove unused phy-mode property from phy node
Murali Karicheri
- [U-Boot] [PATCH 7/7] ARM: dts: k2g-ice: add dt node for netcp
Murali Karicheri
- [U-Boot] [PATCH 0/7] Add netcp networking support on K2G ICE EVM
Murali Karicheri
- [U-Boot] [PATCH v2 0/7] Add netcp networking support on K2G ICE EVM
Murali Karicheri
- [U-Boot] [PATCH v2 1/7] ARM: k2g-ice: Add pinmux support for rgmii interface
Murali Karicheri
- [U-Boot] [PATCH v2 2/7] ARM: k2g-gp-evm: update to rgmii pinmux configuration
Murali Karicheri
- [U-Boot] [PATCH v2 3/7] net: netcp: add support for phy with rgmii ids
Murali Karicheri
- [U-Boot] [PATCH v2 4/7] ARM: k2g: add a workaround to reset the phy
Murali Karicheri
- [U-Boot] [PATCH v2 5/7] k2g: config enable ti phy dp83867 for k2g
Murali Karicheri
- [U-Boot] [PATCH v2 6/7] ARM: dts: k2g-evm: remove unused phy-mode property from phy node
Murali Karicheri
- [U-Boot] [PATCH v2 7/7] ARM: dts: k2g-ice: add dt node for netcp
Murali Karicheri
- [U-Boot] [PATCH v3 0/7] Add netcp networking support on K2G ICE EVM
Murali Karicheri
- [U-Boot] [PATCH v3 1/7] ARM: k2g-ice: Add pinmux support for rgmii interface
Murali Karicheri
- [U-Boot] [PATCH v3 2/7] ARM: k2g-gp-evm: update to rgmii pinmux configuration
Murali Karicheri
- [U-Boot] [PATCH v3 3/7] net: netcp: add support for phy with rgmii ids
Murali Karicheri
- [U-Boot] [PATCH v3 4/7] ARM: k2g: add a workaround to reset the phy
Murali Karicheri
- [U-Boot] [PATCH v3 5/7] ARM: dts: k2g-evm: remove unused phy-mode property from phy node
Murali Karicheri
- [U-Boot] [PATCH v3 6/7] k2g: config enable ti phy dp83867 for k2g
Murali Karicheri
- [U-Boot] [PATCH v3 7/7] ARM: dts: k2g-ice: add dt node for netcp
Murali Karicheri
- [U-Boot] [PATCH v3 0/7] Add netcp networking support on K2G ICE EVM
Murali Karicheri
- [U-Boot] [PATCH v4 0/7] Add netcp networking support on K2G ICE EVM
Murali Karicheri
- [U-Boot] [PATCH v4 1/7] ARM: k2g-gp-evm: update to rgmii pinmux configuration
Murali Karicheri
- [U-Boot] [PATCH v4 2/7] ARM: k2g-ice: Add pinmux support for rgmii interface
Murali Karicheri
- [U-Boot] [PATCH v4 3/7] net: netcp: add support for phy with rgmii ids
Murali Karicheri
- [U-Boot] [PATCH v4 4/7] ARM: k2g: add a workaround to reset the phy
Murali Karicheri
- [U-Boot] [PATCH v4 5/7] ARM: dts: k2g-evm: remove unused phy-mode property from phy node
Murali Karicheri
- [U-Boot] [PATCH v4 6/7] k2g: config enable ti phy dp83867 for k2g
Murali Karicheri
- [U-Boot] [PATCH v4 7/7] ARM: dts: k2g-ice: add dt node for netcp
Murali Karicheri
- [U-Boot] [PATCH v4 0/7] Add netcp networking support on K2G ICE EVM
Murali Karicheri
- [U-Boot] [PATCH 0/1] GigaDevice id update
Jiri Kastner
- [U-Boot] [PATCH 1/1] added missing GigaDevice chips
Jiri Kastner
- [U-Boot] [PATCH v2 0/1] mtd: added missing GigaDevice chips
Jiri Kastner
- [U-Boot] [PATCH v2 1/1] mtd: added missing GigaDevice chips
Jiri Kastner
- [U-Boot] [PATCH v2 1/1] mtd: added missing GigaDevice chips
Jiri Kastner
- [U-Boot] [PATCH v2 0/5] net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driver
Keerthy
- [U-Boot] [PATCH v2 1/5] driver: net: ti: cpsw-mdio: use phys_addr_t for mdio_base addr
Keerthy
- [U-Boot] [PATCH v2 2/5] net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driver
Keerthy
- [U-Boot] [PATCH v2 3/5] arm64: dts: ti: k3-am65: add mcu cpsw node
Keerthy
- [U-Boot] [PATCH v2 4/5] arm64: dts: k3-am654-base-board: add mcu cpsw nuss pinmux and phy defs
Keerthy
- [U-Boot] [PATCH v2 5/5] configs: am65x_evm_a53: enable networking
Keerthy
- [U-Boot] [PATCH v2 2/5] net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driver
Keerthy
- [U-Boot] [PATCH v3 2/5] net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driver
Keerthy
- [U-Boot] [PATCH] net: eth-uclass: call stop only for active devices
Keerthy
- [U-Boot] [PATCH] arm: lib: bootm: Push the Starting kernel print to the end
Keerthy
- [U-Boot] [PATCH v3 2/2] core: ofnode: Add ofnode_get_addr_size_index
Keerthy
- [U-Boot] [PATCH] net: eth-uclass: call stop only for active devices
Keerthy
- [U-Boot] [PATCH 0/2] mtd: rawnand: add STM32 FMC2 NAND flash controller driver
Christophe Kerello
- [U-Boot] [PATCH 1/2] dt-bindings: mtd: stm32_fmc2: add STM32 FMC2 NAND controller documentation
Christophe Kerello
- [U-Boot] [PATCH 2/2] mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver
Christophe Kerello
- [U-Boot] [PATCH] rockchip: make_fit_atf: Use BL31 environ variable for file location
Mark Kettenis
- [U-Boot] [PATCH] usb: Select USB_MUSB_DSPS with USB_MUSB_TI
Alex Kiernan
- [U-Boot] [PATCH] configs: Migrate USB_MUSB_DISABLE_BULK_COMBINE_SPLIT to Kconfig
Alex Kiernan
- [U-Boot] [PATCH] imx: mx6qsabrelite: Update the SabreLite README
Troy Kisky
- [U-Boot] [RFT 0/8] exynos: Fix reboot on Odroid HC1
Krzysztof Kozlowski
- [U-Boot] [RFT 1/8] exynos: Redo detection of revision when all resources are ready
Krzysztof Kozlowski
- [U-Boot] [RFT 2/8] exynos: Wait till ADC stabilizes before checking Odroid HC1 revision
Krzysztof Kozlowski
- [U-Boot] [RFT 3/8] adc: exynos-adc: Fix wrong bit operation used to stop the ADC
Krzysztof Kozlowski
- [U-Boot] [RFT 4/8] regulator: Add support for ramp delay
Krzysztof Kozlowski
- [U-Boot] [RFT 5/8] power: regulator: s2mps11: Fix step for LDO27 and LDO35
Krzysztof Kozlowski
- [U-Boot] [RFT 6/8] power: regulator: s2mps11: Add enable delay
Krzysztof Kozlowski
- [U-Boot] [RFT 7/8] arm: dts: exynos: Add supply for ADC block to Odroid XU3 family
Krzysztof Kozlowski
- [U-Boot] [RFT 8/8] arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid XU3 family
Krzysztof Kozlowski
- [U-Boot] [RFT 1/8] exynos: Redo detection of revision when all resources are ready
Krzysztof Kozlowski
- [U-Boot] [RFT 4/8] regulator: Add support for ramp delay
Krzysztof Kozlowski
- [U-Boot] [RFT 1/8] exynos: Redo detection of revision when all resources are ready
Krzysztof Kozlowski
- [U-Boot] [RFT 6/8] power: regulator: s2mps11: Add enable delay
Krzysztof Kozlowski
- [U-Boot] [PATCH v2 0/9] arm: exynos: Fix reboot on Odroid HC1
Krzysztof Kozlowski
- [U-Boot] [PATCH v2 1/9] adc: exynos-adc: Fix wrong bit operation used to stop the ADC
Krzysztof Kozlowski
- [U-Boot] [PATCH v2 2/9] power: regulator: s2mps11: Fix step for LDO27 and LDO35
Krzysztof Kozlowski
- [U-Boot] [PATCH v2 3/9] arm: exynos: Detect revision later, when all resources are ready
Krzysztof Kozlowski
- [U-Boot] [PATCH v2 4/9] arm: exynos: odroid-xu3: Display info late to have proper type
Krzysztof Kozlowski
- [U-Boot] [PATCH v2 5/9] arm: exynos: Wait till ADC stabilizes before checking Odroid HC1 revision
Krzysztof Kozlowski
- [U-Boot] [PATCH v2 6/9] regulator: Add support for ramp delay
Krzysztof Kozlowski
- [U-Boot] [PATCH v2 7/9] power: regulator: s2mps11: Add enable delay
Krzysztof Kozlowski
- [U-Boot] [PATCH v2 8/9] arm: dts: exynos: Add supply for ADC block to Odroid XU3 family
Krzysztof Kozlowski
- [U-Boot] [PATCH v2 9/9] arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid XU3 family
Krzysztof Kozlowski
- [U-Boot] [PATCH v2 4/9] arm: exynos: odroid-xu3: Display info late to have proper type
Krzysztof Kozlowski
- [U-Boot] [PATCH v2 5/9] arm: exynos: Wait till ADC stabilizes before checking Odroid HC1 revision
Krzysztof Kozlowski
- [U-Boot] [PATCH v2 7/9] power: regulator: s2mps11: Add enable delay
Krzysztof Kozlowski
- [U-Boot] [PATCH v2 7/9] power: regulator: s2mps11: Add enable delay
Krzysztof Kozlowski
- [U-Boot] [PATCH v2 5/9] arm: exynos: Wait till ADC stabilizes before checking Odroid HC1 revision
Krzysztof Kozlowski
- [U-Boot] [PATCH v3 0/9] arm: exynos: Fix reboot on Odroid HC1
Krzysztof Kozlowski
- [U-Boot] [PATCH v3 1/9] adc: exynos-adc: Fix wrong bit operation used to stop the ADC
Krzysztof Kozlowski
- [U-Boot] [PATCH v3 2/9] power: regulator: s2mps11: Fix step for LDO27 and LDO35
Krzysztof Kozlowski
- [U-Boot] [PATCH v3 3/9] arm: exynos: Detect revision later, when all resources are ready
Krzysztof Kozlowski
- [U-Boot] [PATCH v3 4/9] arm: exynos: odroid-xu3: Display info late to have proper type
Krzysztof Kozlowski
- [U-Boot] [PATCH v3 5/9] arm: exynos: Wait till ADC stabilizes before checking Odroid HC1 revision
Krzysztof Kozlowski
- [U-Boot] [PATCH v3 6/9] regulator: Add support for ramp delay
Krzysztof Kozlowski
- [U-Boot] [PATCH v3 7/9] power: regulator: s2mps11: Add enable delay
Krzysztof Kozlowski
- [U-Boot] [PATCH v3 8/9] arm: dts: exynos: Add supply for ADC block to Odroid XU3 family
Krzysztof Kozlowski
- [U-Boot] [PATCH v3 9/9] arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid XU3 family
Krzysztof Kozlowski
- [U-Boot] [PATCH v3 6/9] regulator: Add support for ramp delay
Krzysztof Kozlowski
- [U-Boot] [PATCH v3 6/9] regulator: Add support for ramp delay
Krzysztof Kozlowski
- [U-Boot] [PATCH] arm: dts: exynos: Adjust whitespace around status property
Krzysztof Kozlowski
- [U-Boot] [RFT] configs: arndale: Use appropriate driver for Asix AX88760
Krzysztof Kozlowski
- [U-Boot] [PATCH 1/4] arm: exynos: arndale: Replace Chander Kashyap inactive maintainer
Krzysztof Kozlowski
- [U-Boot] [PATCH 2/4] configs: odroid_xu3: Use consistent syntax for #include
Krzysztof Kozlowski
- [U-Boot] [PATCH 3/4] configs: odroid_xu3: Unify indentation
Krzysztof Kozlowski
- [U-Boot] [PATCH 4/4] arm: exynos: Remove duplicated "boardname" env setting
Krzysztof Kozlowski
- [U-Boot] [PATCH] ARM: Odroid XU3: Enable driver I2C support for OdroidXU3
Krzysztof Kozlowski
- [U-Boot] Nand boot on imx6q board is broken
Jörg Krause
- [U-Boot] [PATCH] MTD: mxs_nand: Fix BCH read timeout error on boards requiring ECC
Jörg Krause
- [U-Boot] [PATCH] MTD: nand: mxs_nand_spl: Fix empty function pointer for BBT
Jörg Krause
- [U-Boot] [PATCH] MTD: nand: mxs_nand: Allow driver to auto setup ECC in SPL
Jörg Krause
- [U-Boot] IMX6 NAND boot regression
Jörg Krause
- [U-Boot] imx8mq-evk: Outbound network packets lost
Sergey Kubushyn
- [U-Boot] imx8mq-evk: Outbound network packets lost
Sergey Kubushyn
- [U-Boot] [PATCH] mc : Add support to run MC in 128 MB DDR size
Ashish Kumar
- [U-Boot] [PATCH v1] mc : Add support to run MC in 128 MB DDR size
Ashish Kumar
- [U-Boot] [PATCH 01/12] nxp: ls1088a: fix dppa exit when using efi boot
Ashish Kumar
- [U-Boot] [PATCH 12/12] nxp: ls1043a: use default scan_dev_for_boot
Ashish Kumar
- [U-Boot] [PATCH] drivers: net: ls1088ardb: Fix EC1 and EC2 RCW offset
Pramod Kumar
- [U-Boot] [PATCH] arm: arm64 32bit address relocation
Udit Kumar
- [U-Boot] [PATCH v2] MAINTAINERS: Change fsl-qoriq, mpc85xx, mpc86xx maintainers
Prabhakar Kushwaha
- [U-Boot] [PATCH] drivers: net: ldpaa_eth: check if the dpmac is enabled
Prabhakar Kushwaha
- [U-Boot] FW: [PATCHv3 00/11] pci: Add PCIe Gen4 controller driver for NXP Layerscape SoCs
Prabhakar Kushwaha
- [U-Boot] [PATCH] Fix : Uboot crash when booting from SD.
Prabhakar Kushwaha
- [U-Boot] [PATCH] L3 cache : arch : arm : lib : Flush L3 after relocation
Prabhakar Kushwaha
- [U-Boot] [PATCH] L3 cache : arch : arm : lib : Flush L3 after relocation
Prabhakar Kushwaha
- [U-Boot] [PATCH] board/freescale: Enable DHCP distro boot for Layerscape board
Prabhakar Kushwaha
- [U-Boot] Please pull u-boot-fsl-qoriq master
Prabhakar Kushwaha
- [U-Boot] [PATCH] armv8: lx2160a: Update CONFIG_SYS_FSL_PEBUF_BASE
Prabhakar Kushwaha
- [U-Boot] [PATCH] drivers/ddr/fsl: Update fsl_ddr_board_options as weak function
Prabhakar Kushwaha
- [U-Boot] [PATCH] armv8, lx2160a: Initialize ethernet array in serdes_init
Prabhakar Kushwaha
- [U-Boot] [PATCH v2] armv8: fsl-layerscape: reorder rgmii dpmacs' enablement
Prabhakar Kushwaha
- [U-Boot] [PATCH][v3] armv8: lx2160ardb : Add support for LX2160ARDB platform
Prabhakar Kushwaha
- [U-Boot] [PATCH v1] armv8: lx2160a: add eSDHC nodes
Prabhakar Kushwaha
- [U-Boot] [PATCH v1] configs: lx2160a: enable driver model for eSDHC
Prabhakar Kushwaha
- [U-Boot] [PATCH] armv8: lx2160a: Modify dspi1 controller intrrupts property
Prabhakar Kushwaha
- [U-Boot] [v1 1/2] armv8: dts: fsl-lx2160a: add sata node support
Prabhakar Kushwaha
- [U-Boot] [PATCH 2/2] arm64: lx2160ardb: enable DM support for sata
Prabhakar Kushwaha
- [U-Boot] [PATCH 1/2] armv8: emc2305: add support for fan controller
Prabhakar Kushwaha
- [U-Boot] [PATCH 2/2] lx2160: Enable support of EMC2305
Prabhakar Kushwaha
- [U-Boot] [PATCH][v3] board/lx2160ardb: Add distro boot support
Prabhakar Kushwaha
- [U-Boot] [PATCH v2] armv8:LX2160: Adds distro secure boot support.
Prabhakar Kushwaha
- [U-Boot] [PATCH] board/lx2160a: Add init_func_vid() definition
Prabhakar Kushwaha
- [U-Boot] [PATCH v6] lx2160aqds : Add support for LX2160AQDS platform
Prabhakar Kushwaha
- [U-Boot] [PATCH 1/1] LX2160AQDS: Adds SECURE_BOOT defconfig.
Prabhakar Kushwaha
- [U-Boot] [PATCH 1/2] armv8: ls1043ardb: Add the nand_bootcmd definition
Prabhakar Kushwaha
- [U-Boot] [PATCH] QE: ls1043a: modify CONFIG_SYS_QE_FW_ADDR to (512*4A00) in SD Card
Prabhakar Kushwaha
- [U-Boot] [PATCH] L3 cache : arch : arm : lib : Flush L3 after relocation
Prabhakar Kushwaha
- [U-Boot] [PATCH 1/7] armv8: fsl-layerscape: ls1043a: move SCSI_AHCI and SCSI form arch/arm/cpu/armv8/fsl-layerscape/Kconfig to arch/arm/Kconfig
Prabhakar Kushwaha
- [U-Boot] PMIC initialization
Jeroen van der Laan
- [U-Boot] [PATCH 1/3] videomodes: Allow EDID timings where hsync/vsync pulse is 0
Priit Laes
- [U-Boot] [PATCH 5/6] pinctrl: add driver for MT8516
Ryder Lee
- [U-Boot] [PATCH 2/6] mmc: mtk-sd: add support for MT8516
Ryder Lee
- [U-Boot] [PATCH 3/6] clk: mediatek: add support for CLK_GATE_SETCLR_INV flag
Ryder Lee
- [U-Boot] [PATCH 4/6] clk: mediatek: add driver for MT8516
Ryder Lee
- [U-Boot] [PATCH 1/6] mmc: mtk-sd: add source_cg clock support
Ryder Lee
- [U-Boot] [PATCH v2 1/2] distro_bootcmd: add spi flash boot command
Oskari Lemmelä
- [U-Boot] [PATCH RESEND 6/6] doc: imx: habv4: Remove secure_boot.txt guide
Breno Matheus Lima
- [U-Boot] [PATCH 6/6] doc: imx: habv4: Remove secure_boot.txt guide
Breno Matheus Lima
- [U-Boot] [PATCH] configs: am57xx_evm: define CONFIG_SPL_LOAD_FIT_ADDRESS for SPL-DFU
Bin Liu
- [U-Boot] [PATCH 2/2] xilinx: common: Add support for DM_I2C zynq_board_read_rom_ethaddr()
Mike Looijmans
- [U-Boot] [PATCH 1/3] mmc: fsl_esdhc: add esdhc_imx flag
Y.b. Lu
- [U-Boot] [PATCH 2/3] mmc: fsl_esdhc: clean up register definition
Y.b. Lu
- [U-Boot] [PATCH 3/3] mmc: fsl_esdhc: clarify i.MX eSDHC specific functions
Y.b. Lu
- [U-Boot] [v2, 1/3] mmc: fsl_esdhc: add esdhc_imx flag
Y.b. Lu
- [U-Boot] [v2, 2/3] mmc: fsl_esdhc: clean up register definition
Y.b. Lu
- [U-Boot] [v2, 3/3] mmc: fsl_esdhc: clarify i.MX eSDHC specific functions
Y.b. Lu
- [U-Boot] [PATCH 1/3] mmc: fsl_esdhc: add esdhc_imx flag
Y.b. Lu
- [U-Boot] [v2, 1/3] mmc: fsl_esdhc: add esdhc_imx flag
Y.b. Lu
- [U-Boot] [v2, 1/3] mmc: fsl_esdhc: add esdhc_imx flag
Y.b. Lu
- [U-Boot] [PATCH 1/3] Move CONFIG_FSL_ESDHC to defconfig
Y.b. Lu
- [U-Boot] [PATCH 2/3] mmc: split fsl_esdhc driver for i.MX
Y.b. Lu
- [U-Boot] [PATCH 3/3] Convert to use fsl_esdhc_imx for i.MX platforms
Y.b. Lu
- [U-Boot] [v2, 1/3] mmc: fsl_esdhc: add esdhc_imx flag
Y.b. Lu
- [U-Boot] [v2] powerpc: t104xrdb: Add support of MTA9ADF1G72AZ DDR
Peng Ma
- [U-Boot] [PATCH v2 04/21] vybrid: clock: Provide enable_i2c_clk() function for Vybrid
Lukasz Majewski
- [U-Boot] [PATCH v2 04/21] vybrid: clock: Provide enable_i2c_clk() function for Vybrid
Lukasz Majewski
- [U-Boot] [PATCH v4 01/20] common: spl_fit: Fix the spl_fit_image_get_os for FIT_IMAGE_TINY
Lukasz Majewski
- [U-Boot] [PATCH v4 02/20] usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE
Lukasz Majewski
- [U-Boot] [PATCH v4 03/20] usb: ehci-mx6: Make regulator DM_REGULATOR dependent
Lukasz Majewski
- [U-Boot] [PATCH v4 06/20] mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds
Lukasz Majewski
- [U-Boot] [PATCH v4 07/20] board: mx6sabresd: Add board_fit_config_name_match to support FIT in SPL
Lukasz Majewski
- [U-Boot] [PATCH v4 08/20] board: mx6sabreauto: Add board_fit_config_name_match to support FIT in SPL
Lukasz Majewski
- [U-Boot] [PATCH v4 09/20] arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files
Lukasz Majewski
- [U-Boot] [PATCH v4 10/20] arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd]
Lukasz Majewski
- [U-Boot] [PATCH v3 00/22] imx: vybrid: Update BK4 and PCM052 boards to only use DM/DTS
Lukasz Majewski
- [U-Boot] [PATCH v3 01/22] net: FEC: Add compatible for vybrid (vf610) to reuse fec_mxc.c driver
Lukasz Majewski
- [U-Boot] [PATCH v3 02/22] net: Kconfig: FEC: Add dependency on VF610
Lukasz Majewski
- [U-Boot] [PATCH v3 03/22] vybrid: ddr: Extend vf610-pinfunc.h with DDR pads definitions
Lukasz Majewski
- [U-Boot] [PATCH v3 04/22] vybrid: clock: Provide enable_i2c_clk() function for Vybrid
Lukasz Majewski
- [U-Boot] [PATCH v3 05/22] pcm052: board: Do not enable I2C2 code in the board file
Lukasz Majewski
- [U-Boot] [PATCH v3 06/22] vybrid: Define the imx_get_mac_from_fuse() as a __weak function
Lukasz Majewski
- [U-Boot] [PATCH v3 07/22] pcm052: board: Remove "m4go" command as it is superseded by "bootaux"
Lukasz Majewski
- [U-Boot] [PATCH v3 08/22] pcm052: board: vybrid: Update the board name for BK4 device
Lukasz Majewski
- [U-Boot] [PATCH v3 09/22] ARM: DTS: vybrid: Update vf.dtsi file to descibe more vf610 hardware
Lukasz Majewski
- [U-Boot] [PATCH v3 10/22] pcm052: board: cosmetic: Add copyright notice to pcm052.c
Lukasz Majewski
- [U-Boot] [PATCH v3 11/22] ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052)
Lukasz Majewski
- [U-Boot] [PATCH v3 12/22] ARM: DTS: Provide vf610-bk4r1-u-boot.dtsi for U-Boot specific properties
Lukasz Majewski
- [U-Boot] [PATCH v3 13/22] defconfig: bk4/pcm052: Update bk4r1|pcm052_defconfig to support DM/DT
Lukasz Majewski
- [U-Boot] [PATCH v3 14/22] config: pcm052: Use SZ_X{MK} from linux/sizes.h for include/configs/pcm052.h
Lukasz Majewski
- [U-Boot] [PATCH v3 15/22] config: bk4: Update include/configs/bk4r1.h file
Lukasz Majewski
- [U-Boot] [PATCH v3 16/22] pcm052: board: Remove in-board setup code (it is now replaced by DM setup)
Lukasz Majewski
- [U-Boot] [PATCH v3 17/22] config: bk4: Update u-boot script to support recovery via SD card
Lukasz Majewski
- [U-Boot] [PATCH v3 18/22] config: bk4: Update u-boot envs to support NOR memories initial setup
Lukasz Majewski
- [U-Boot] [PATCH v3 19/22] pcm052: bk4: sdcard: Add support for SD card booting/recovery
Lukasz Majewski
- [U-Boot] [PATCH v3 20/22] pcm052: board: Add code to setup LED default states
Lukasz Majewski
- [U-Boot] [PATCH v3 21/22] pcm052: mac: Provide board specific imx_get_mac_from_fuse() function
Lukasz Majewski
- [U-Boot] [PATCH v3 22/22] pcm052: bk4: Add board_phy_config() for BK4 to setup ksz8081 phy
Lukasz Majewski
- [U-Boot] [PATCH 2/8] power: stpmu1: rename files to stpmic1
Lukasz Majewski
- [U-Boot] [PATCH 3/8] power: rename stpmu1 to official name stpmic1
Lukasz Majewski
- [U-Boot] [PATCH v1 24/26] colibri_imx6: switch to zimage
Lukasz Majewski
- [U-Boot] [PATCH] mmc: Do not poll using CMD13 when changing timing
Lukasz Majewski
- [U-Boot] [RFT 6/8] power: regulator: s2mps11: Add enable delay
Lukasz Majewski
- [U-Boot] [RFT 8/8] arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid XU3 family
Lukasz Majewski
- [U-Boot] [RFT 1/8] exynos: Redo detection of revision when all resources are ready
Lukasz Majewski
- [U-Boot] [RFT 1/8] exynos: Redo detection of revision when all resources are ready
Lukasz Majewski
- [U-Boot] [PATCH v3 03/22] vybrid: ddr: Extend vf610-pinfunc.h with DDR pads definitions
Lukasz Majewski
- [U-Boot] [PATCH v3 01/22] net: FEC: Add compatible for vybrid (vf610) to reuse fec_mxc.c driver
Lukasz Majewski
- [U-Boot] [PATCH v3 07/22] pcm052: board: Remove "m4go" command as it is superseded by "bootaux"
Lukasz Majewski
- [U-Boot] [PATCH v4 00/22] imx: vybrid: Update BK4 and PCM052 boards to only use DM/DTS
Lukasz Majewski
- [U-Boot] [PATCH v4 01/22] net: FEC: Add compatible for vybrid (vf610) to reuse fec_mxc.c driver
Lukasz Majewski
- [U-Boot] [PATCH v4 02/22] net: Kconfig: FEC: Add dependency on VF610
Lukasz Majewski
- [U-Boot] [PATCH v4 03/22] vybrid: ddr: Extend vf610-pinfunc.h with DDR pads definitions
Lukasz Majewski
- [U-Boot] [PATCH v4 04/22] vybrid: clock: Provide enable_i2c_clk() function for Vybrid
Lukasz Majewski
- [U-Boot] [PATCH v4 05/22] pcm052: board: Do not enable I2C2 code in the board file
Lukasz Majewski
- [U-Boot] [PATCH v4 06/22] vybrid: Define the imx_get_mac_from_fuse() as a __weak function
Lukasz Majewski
- [U-Boot] [PATCH v4 07/22] pcm052: board: Remove "m4go" command as it is superseded by "bootaux"
Lukasz Majewski
- [U-Boot] [PATCH v4 08/22] pcm052: board: vybrid: Update the board name for BK4 device
Lukasz Majewski
- [U-Boot] [PATCH v4 09/22] ARM: DTS: vybrid: Update vf.dtsi file to descibe more vf610 hardware
Lukasz Majewski
- [U-Boot] [PATCH v4 10/22] pcm052: board: cosmetic: Add copyright notice to pcm052.c
Lukasz Majewski
- [U-Boot] [PATCH v4 11/22] ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052)
Lukasz Majewski
- [U-Boot] [PATCH v4 12/22] ARM: DTS: Provide vf610-bk4r1-u-boot.dtsi for U-Boot specific properties
Lukasz Majewski
- [U-Boot] [PATCH v4 13/22] defconfig: bk4/pcm052: Update bk4r1|pcm052_defconfig to support DM/DT
Lukasz Majewski
- [U-Boot] [PATCH v4 14/22] config: pcm052: Use SZ_X{MK} from linux/sizes.h for include/configs/pcm052.h
Lukasz Majewski
- [U-Boot] [PATCH v4 15/22] config: bk4: Update include/configs/bk4r1.h file
Lukasz Majewski
- [U-Boot] [PATCH v4 16/22] pcm052: board: Remove in-board setup code (it is now replaced by DM setup)
Lukasz Majewski
- [U-Boot] [PATCH v4 17/22] config: bk4: Update u-boot script to support recovery via SD card
Lukasz Majewski
- [U-Boot] [PATCH v4 18/22] config: bk4: Update u-boot envs to support NOR memories initial setup
Lukasz Majewski
- [U-Boot] [PATCH v4 19/22] pcm052: bk4: sdcard: Add support for SD card booting/recovery
Lukasz Majewski
- [U-Boot] [PATCH v4 20/22] pcm052: board: Add code to setup LED default states
Lukasz Majewski
- [U-Boot] [PATCH v4 21/22] pcm052: mac: Provide board specific imx_get_mac_from_fuse() function
Lukasz Majewski
- [U-Boot] [PATCH v4 22/22] pcm052: bk4: Add board_phy_config() for BK4 to setup ksz8081 phy
Lukasz Majewski
- [U-Boot] [PATCH v2 1/9] adc: exynos-adc: Fix wrong bit operation used to stop the ADC
Lukasz Majewski
- [U-Boot] [PATCH v2 2/9] power: regulator: s2mps11: Fix step for LDO27 and LDO35
Lukasz Majewski
- [U-Boot] [PATCH v2 8/9] arm: dts: exynos: Add supply for ADC block to Odroid XU3 family
Lukasz Majewski
- [U-Boot] [PATCH v2 7/9] power: regulator: s2mps11: Add enable delay
Lukasz Majewski
- [U-Boot] [PATCH v2 5/9] arm: exynos: Wait till ADC stabilizes before checking Odroid HC1 revision
Lukasz Majewski
- [U-Boot] [PATCH v2 7/9] power: regulator: s2mps11: Add enable delay
Lukasz Majewski
- [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM
Lukasz Majewski
- [U-Boot] [PATCH v2 5/9] arm: exynos: Wait till ADC stabilizes before checking Odroid HC1 revision
Lukasz Majewski
- [U-Boot] [PATCH v3 3/9] arm: exynos: Detect revision later, when all resources are ready
Lukasz Majewski
- [U-Boot] [PATCH v1 07/22] configs: move CONFIG_MXC_OCOTP to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion
Lukasz Majewski
- [U-Boot] PMIC initialization
Lukasz Majewski
- [U-Boot] [v2, 1/3] mmc: fsl_esdhc: add esdhc_imx flag
Lukasz Majewski
- [U-Boot] [PATCH] ARM: dts: i.MX6QDL: add missing spba-bus to aips-bus
Lukasz Majewski
- [U-Boot] [v2, 1/3] mmc: fsl_esdhc: add esdhc_imx flag
Lukasz Majewski
- [U-Boot] Kernel hang when replace older uboot with uboot master V2
Lukasz Majewski
- [U-Boot] Kernel hang when replace older uboot with uboot master V2
Lukasz Majewski
- [U-Boot] [RFT] configs: arndale: Use appropriate driver for Asix AX88760
Lukasz Majewski
- [U-Boot] [PATCH 1/4] arm: exynos: arndale: Replace Chander Kashyap inactive maintainer
Lukasz Majewski
- [U-Boot] [PATCH] ARM: Odroid XU3: Enable driver I2C support for OdroidXU3
Lukasz Majewski
- [U-Boot] [PATCH 2/4] configs: odroid_xu3: Use consistent syntax for #include
Lukasz Majewski
- [U-Boot] [PATCH 3/4] configs: odroid_xu3: Unify indentation
Lukasz Majewski
- [U-Boot] [PATCH 4/4] arm: exynos: Remove duplicated "boardname" env setting
Lukasz Majewski
- [U-Boot] [PATCH] usb: udc-uclass: Fixed problem when no alias is defined in DT
Lukasz Majewski
- [U-Boot] IMX6 DM_USB / DM_MMC requires OF_CONTROL?
Lukasz Majewski
- [U-Boot] [PATCH] elf: fix cache flushing in 'bootelf -p' command
Kurban Mallachiev
- [U-Boot] cl-som-am57x_defconfig will be dropped
Uri Mashiach
- [U-Boot] [PATCH 1/2] mtd: ubi debug: Remove the pid print from ubi_assert
Eran Matityahu
- [U-Boot] [PATCH 2/2] mtd: ubi, ubifs debug: Use pr_debug instead of pr_crit
Eran Matityahu
- [U-Boot] [PATCH 1/2] mtd: ubi debug: Remove the pid print from ubi_assert
Eran Matityahu
- [U-Boot] [PATCH v2 4/8] spi: sun4i: Access registers and bits via enum offsets
Stefan Mavrodiev
- [U-Boot] [PATCH v2 4/8] spi: sun4i: Access registers and bits via enum offsets
Stefan Mavrodiev
- [U-Boot] [PATCH 1/3] x86: Change 4-level page table base address to low memory
Bin Meng
- [U-Boot] [PATCH v6 05/16] riscv: Add place-holder asm/arch/clk.h for driver compilation
Bin Meng
- [U-Boot] [PATCH 2/4 v3] pci: pci_mvebu: Add DM_PCI support and move CONFIG_PCI_MVEBU to defconfig
Bin Meng
- [U-Boot] [PATCH v7 01/15] riscv: Enable create symlink using kconfig
Bin Meng
- [U-Boot] [PATCH v7 04/15] riscv: Add place-holder asm/arch/clk.h for driver compilation
Bin Meng
- [U-Boot] [PATCH 1/7] riscv: add infrastructure for calling functions on other harts
Bin Meng
- [U-Boot] [PATCH 2/7] riscv: import the supervisor binary interface header file
Bin Meng
- [U-Boot] [PATCH 3/7] riscv: implement IPI platform functions using SBI
Bin Meng
- [U-Boot] [PATCH 4/7] riscv: delay initialization of caches and debug UART
Bin Meng
- [U-Boot] [PATCH 6/7] riscv: boot images passed to bootm on all harts
Bin Meng
- [U-Boot] [PATCH 7/7] riscv: qemu: enable SMP
Bin Meng
- [U-Boot] FW: [PATCHv3 00/11] pci: Add PCIe Gen4 controller driver for NXP Layerscape SoCs
Bin Meng
- [U-Boot] [PATCH 1/8] armv8: fsl-layerscpae: correct the PCIe controllers' region size
Bin Meng
- [U-Boot] [PATCHv3 08/11] armv8: lx2160a: enable the pci command
Bin Meng
- [U-Boot] [PATCHv3 10/11] pci: ls_pcie_g4: Add Workaround for A-011451
Bin Meng
- [U-Boot] [PATCH v1] x86: tangier: Add initial ACPI support for PMIC device
Bin Meng
- [U-Boot] [PATCH 1/3] x86: Change 4-level page table base address to low memory
Bin Meng
- [U-Boot] [PATCH 2/3] x86: Don't copy the cpu_call64() function to a hardcoded address
Bin Meng
- [U-Boot] [PATCH 3/3] x86: Use the existing GDT in the ROM for 64-bit U-Boot proper
Bin Meng
- [U-Boot] [PATCH v1] x86: tangier: Add initial ACPI support for PMIC device
Bin Meng
- [U-Boot] Please pull u-boot-x86
Bin Meng
- [U-Boot] [PATCH v7 00/15] SiFive FU540 Support
Bin Meng
- [U-Boot] [PATCH v7 00/15] SiFive FU540 Support
Bin Meng
- [U-Boot] [PATCH 00/40] x86: Add support for booting from TPL
Bin Meng
- [U-Boot] [PATCH v7 00/15] SiFive FU540 Support
Bin Meng
- [U-Boot] [PATCH 01/33] log: Add a Kconfig option to set the default log level
Bin Meng
- [U-Boot] [PATCH 02/33] log: Add documentation for convenience functions
Bin Meng
- [U-Boot] [PATCH 03/33] log: Allow #define LOG_DEBUG to enable logging in a file
Bin Meng
- [U-Boot] [PATCH 04/33] dm: syscon: Don't require a regmap for PCI devices
Bin Meng
- [U-Boot] [PATCH 05/33] i2c: designware: Add error checking on init
Bin Meng
- [U-Boot] [PATCH 06/33] pci: Don't export pci_hose_config_device()
Bin Meng
- [U-Boot] [PATCH 07/33] pci: Fix comment in struct pci_child_platdata
Bin Meng
- [U-Boot] [PATCH 08/33] gpio: Show inactive GPIOs when explicitly requested
Bin Meng
- [U-Boot] [PATCH 09/33] gpio: Use case-insentive matching on the GPIO name
Bin Meng
- [U-Boot] [PATCH 10/33] pci: Add IDs for Intel high-definition audio
Bin Meng
- [U-Boot] [PATCH 11/33] sandbox: Add a note about the growing state_info struct
Bin Meng
- [U-Boot] [PATCH 12/33] x86: Adjust I/O macros to work on 64-bit machines
Bin Meng
- [U-Boot] [PATCH 13/33] x86: samus: Increase the pre-reloc memory
Bin Meng
- [U-Boot] [PATCH 14/33] x86: link: Increase malloc size and decrease code size
Bin Meng
- [U-Boot] [PATCH 15/33] x86: sandbox: pch: Add a CONFIG option for PCH
Bin Meng
- [U-Boot] [PATCH 16/33] sandbox: pch: Add a test for the PCH uclass
Bin Meng
- [U-Boot] [PATCH 17/33] pch: Add ioctl support
Bin Meng
- [U-Boot] [PATCH 18/33] x86: ivybridge: Add a way to get the HDA config setting
Bin Meng
- [U-Boot] [PATCH 19/33] sound: Mark sound_setup() as optional
Bin Meng
- [U-Boot] [PATCH 20/33] sound: Add uclass operations for beeping
Bin Meng
- [U-Boot] [PATCH 21/33] sound: Add support for Intel HDA
Bin Meng
- [U-Boot] [PATCH 22/33] sandbox: sound: Silence sound for testing
Bin Meng
- [U-Boot] [PATCH 23/33] sound: x86: link: Add sound support
Bin Meng
- [U-Boot] [PATCH 24/33] sound: x86: Add beeping support in i8254
Bin Meng
- [U-Boot] [PATCH 25/33] sound: Add a driver for the i8254 beep
Bin Meng
- [U-Boot] [PATCH 26/33] x86: coreboot: Enable the beeper sound driver
Bin Meng
- [U-Boot] [PATCH 27/33] x86: broadwell: Add support for the ADSP
Bin Meng
- [U-Boot] [PATCH 28/33] x86: broadwell: Don't bother probing the PCH for pinctrl
Bin Meng
- [U-Boot] [PATCH 29/33] x86: broadwell: Add support for serial I/O devices
Bin Meng
- [U-Boot] [PATCH 30/33] x86: sound: Add support for broadwell I2S
Bin Meng
- [U-Boot] [PATCH 31/33] sound: Add a driver for RealTek RT5677
Bin Meng
- [U-Boot] [PATCH 32/33] x86: sound: Add sound support for samus (broadwell)
Bin Meng
- [U-Boot] [PATCH 33/33] x86: Add sound support for samus
Bin Meng
- [U-Boot] [PATCHv3 10/11] pci: ls_pcie_g4: Add Workaround for A-011451
Bin Meng
- [U-Boot] [PATCH v2 01/34] log: Fix up Kconfig log level names
Bin Meng
- [U-Boot] [PATCH v2 04/34] log: Allow #define LOG_DEBUG to enable logging in a file
Bin Meng
- [U-Boot] [PATCH v2 09/34] gpio: Show inactive GPIOs when explicitly requested
Bin Meng
- [U-Boot] [PATCH v2 11/34] pci: Add IDs for Intel high-definition audio
Bin Meng
- [U-Boot] [PATCH v2 17/34] sandbox: pch: Add a test for the PCH uclass
Bin Meng
- [U-Boot] [PATCH v2 23/34] sandbox: sound: Silence sound for testing
Bin Meng
- [U-Boot] [PATCH v2 24/34] sound: x86: link: Add sound support
Bin Meng
- [U-Boot] [PATCH v2 25/34] sound: x86: Add beeping support in i8254
Bin Meng
- [U-Boot] [PATCH v2 26/34] sound: Add a driver for the i8254 beep
Bin Meng
- [U-Boot] [PATCH v2 28/34] x86: broadwell: Add support for the ADSP
Bin Meng
- [U-Boot] [PATCH v2 33/34] x86: sound: Add sound support for samus (broadwell)
Bin Meng
- [U-Boot] [PATCH v2 22/34] sound: Add support for Intel HDA
Bin Meng
- [U-Boot] [PATCH v2 00/34] x86: Add support for sound
Bin Meng
- [U-Boot] Please pull u-boot-x86
Bin Meng
- [U-Boot] [PATCH] coreboot: add support fot CB_TAG_BOOT_MEDIA_PARAMS
Bin Meng
- [U-Boot] [PATCH] net: eth-uclass: call stop only for active devices
Bin Meng
- [U-Boot] [PATCHv3 10/11] pci: ls_pcie_g4: Add Workaround for A-011451
Bin Meng
- [U-Boot] [PATCH v8 00/15] SiFive FU540 Support
Bin Meng
- [U-Boot] [PATCH 01/40] binman: Don't generate an error in 'text' entry constructor
Bin Meng
- [U-Boot] [PATCH 02/40] binman: Don't show image-skip message by default
Bin Meng
- [U-Boot] [PATCH 03/40] binman: Add a missing comment in Entry_vblock
Bin Meng
- [U-Boot] [PATCH 04/40] dm: core: Fix translate condition in ofnode_get_addr_size()
Bin Meng
- [U-Boot] [PATCH 05/40] cros_ec: Use a hyphen in the uclass name
Bin Meng
- [U-Boot] [PATCH 06/40] spl: Allow sandbox to build a device-tree file
Bin Meng
- [U-Boot] [PATCH 07/40] RFC: binman: Allow sections to have an offset
Bin Meng
- [U-Boot] [PATCH 08/40] x86: start64: Fix copyright message
Bin Meng
- [U-Boot] [PATCH 09/40] x86: mp_init: Use proper error numbers
Bin Meng
- [U-Boot] [PATCH 10/40] x86: Add a way to reinit the cpu
Bin Meng
- [U-Boot] [PATCH 11/40] x86: dts: Add device-tree labels for rtc and reset
Bin Meng
- [U-Boot] [PATCH 12/40] x86: Update a stale comment about ifdtool
Bin Meng
- [U-Boot] [PATCH 13/40] x86: Support SPL and TPL
Bin Meng
- [U-Boot] [PATCH 14/40] x86: Support booting with TPL
Bin Meng
- [U-Boot] [PATCH 15/40] x86: Add a handoff header file
Bin Meng
- [U-Boot] [PATCH 16/40] x86: broadwell: Improve SDRAM debugging output
Bin Meng
- [U-Boot] [PATCH 17/40] x86: broadwell: Allow SDRAM init from SPL
Bin Meng
- [U-Boot] [PATCH 18/40] x86: Move init of debug UART to cpu.c
Bin Meng
- [U-Boot] [PATCH 19/40] x86: broadwell: Split CPU init
Bin Meng
- [U-Boot] [PATCH 20/40] x86: Add support for starting from SPL/TPL
Bin Meng
- [U-Boot] [PATCH 21/40] x86: Allow 16-bit init to be in TPL
Bin Meng
- [U-Boot] [PATCH 22/40] x86: broadwell: Allow booting from SPL
Bin Meng
- [U-Boot] [PATCH 23/40] x86: broadwell: Select refcode and CPU code for SPL
Bin Meng
- [U-Boot] [PATCH 24/40] x86: Add common Intel code for SPL
Bin Meng
- [U-Boot] [PATCH 25/40] x86: Support saving MRC data from SPL
Bin Meng
- [U-Boot] [PATCH 26/40] x86: Add a simple TPL implementations
Bin Meng
- [U-Boot] [PATCH 27/40] x86: mrccache: Add more debugging
Bin Meng
- [U-Boot] [PATCH 28/40] x86: Add a sysreset driver for the Intel PCH
Bin Meng
- [U-Boot] [PATCH 29/40] x86: Support TPL in Intel common code
Bin Meng
- [U-Boot] [PATCH 30/40] x86: Don't set up MTRRs in SPL
Bin Meng
- [U-Boot] [PATCH 31/40] x86: Don't generate a bootstage report in SPL
Bin Meng
- [U-Boot] [PATCH 32/40] x86: Support PCI VGA ROM when TPL is used
Bin Meng
- [U-Boot] [PATCH 33/40] x86: sysreset: Implement the get_last() method
Bin Meng
- [U-Boot] [PATCH 34/40] x86: Add documention on the samus flashmap
Bin Meng
- [U-Boot] [PATCH 35/40] x86: samus: Update device tree for SPL
Bin Meng
- [U-Boot] [PATCH 36/40] x86: samus: Update device tree for verified boot
Bin Meng
- [U-Boot] [PATCH 37/40] x86: Update device tree for TPL
Bin Meng
- [U-Boot] [PATCH 38/40] x86: Update device tree for Chromium OS verified boot
Bin Meng
- [U-Boot] [PATCH 39/40] x86: Fix device-tree indentation
Bin Meng
- [U-Boot] [PATCH 40/40] x86: samus: Add a target to boot through TPL
Bin Meng
- [U-Boot] [PATCHv3 10/11] pci: ls_pcie_g4: Add Workaround for A-011451
Bin Meng
- [U-Boot] [PATCH 1/4] x86: Make sure i8254 is setup correctly before generating beeps
Bin Meng
- [U-Boot] [PATCH 2/4] x86: Add a dtsi file for the pc speaker
Bin Meng
- [U-Boot] [PATCH 3/4] x86: coreboot: Add the missing pc speaker node in the device tree
Bin Meng
- [U-Boot] [PATCH 4/4] x86: crownbay: Enable the beeper sound driver
Bin Meng
- [U-Boot] [PATCH] net: eth-uclass: call stop only for active devices
Bin Meng
- [U-Boot] [PATCH v2 1/2] x86: TunnelCreek: switch P state to the highest freq
Bin Meng
- [U-Boot] [PATCH v1 1/2] x86: edison: Use proper number of serial interface
Bin Meng
- [U-Boot] [PATCH v1 2/2] x86: edison: Add the rest of UARTs present on board
Bin Meng
- [U-Boot] [PATCH v1 1/2] x86: acpi: Add DMA descriptors for SPI5 on Intel Tangier
Bin Meng
- [U-Boot] [PATCH v1 2/2] x86: acpi: Add DMA descriptors for I2C1 on Intel Tangier
Bin Meng
- [U-Boot] [PATCH v2 2/2] x86: edison: Add the rest of UARTs present on board
Bin Meng
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
Jack Mitchell
- [U-Boot] [PATCH v1 11/23] apalis_imx6: migrate mmc and sata to using driver model
Soeren Moch
- [U-Boot] [PATCH v2 11/23] apalis_imx6: migrate mmc and sata to using driver model
Soeren Moch
- [U-Boot] [PATCH v4 19/20] board: mx6sabresd: Remove the enet reset gpio handling
Soeren Moch
- [U-Boot] [PATCH] ARM: Odroid XU3: Enable driver I2C support for OdroidXU3
Anand Moon
- [U-Boot] [PATCH v3 0/9] arm: exynos: Fix reboot on Odroid HC1
Anand Moon
- [U-Boot] Compiling UBOOT for MIPS (Reference AP143 board)
Joan Moreau
- [U-Boot] Compiling UBOOT for MIPS (Reference AP143 board)
Joan Moreau
- [U-Boot] [PATCH v1] dm: pinctrl: Remove obsolete function pinctrl_decode_pin_config_dm().
Christoph Muellner
- [U-Boot] [PATCH] net:phy:aquantia Set only autoneg on in register 4.c441
Valentin-catalin Neacsu
- [U-Boot] [PATCH] arm: socfpga: move gen5 SDR driver to DM
Dinh Nguyen
- [U-Boot] [PATCH] ARM: socfpga: Configure PL310 latencies
Dinh Nguyen
- [U-Boot] [PATCH] ARM: cache: Fix incorrect bitwise operation
Dinh Nguyen
- [U-Boot] [PATCH] ARM: socfpga: Configure PL310 latencies
Dinh Nguyen
- [U-Boot] [PATCH] configs: tbs_a711: lower dram frequency
Tomas Novotny
- [U-Boot] [PATCH] configs: tbs_a711: lower dram frequency
Tomas Novotny
- [U-Boot] [PATCH 1/4] sunxi: Fix build when CONFIG_CMD_NET is disabled
Tomas Novotny
- [U-Boot] [PATCH v2] warp7: README: Adjust the binary name after DM conversion
Bryan O'Donoghue
- [U-Boot] [PATCH v2] warp7: README: Adjust the binary name after DM conversion
Bryan O'Donoghue
- [U-Boot] [PATCH v2] warp7: README: Adjust the binary name after DM conversion
Joris Offouga
- [U-Boot] [RFC 4/9] arm: imx7d-pico-pi: Convert to DM MMC initialization
Joris Offouga
- [U-Boot] [RFC 4/9] arm: imx7d-pico-pi: Convert to DM MMC initialization
Joris Offouga
- [U-Boot] [RFC 4/9] arm: imx7d-pico-pi: Convert to DM MMC initialization
Joris Offouga
- [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM
Joris Offouga
- [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM
Joris Offouga
- [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM
Joris Offouga
- [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM
Joris Offouga
- [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM
Joris Offouga
- [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM
Joris Offouga
- [U-Boot] [PATCH 1/3] ARM: rmobile: Switch CPU to non-secure HYP mode for r8a7790 based boards
Oleksandr
- [U-Boot] [PATCH 1/3] ARM: rmobile: Switch CPU to non-secure HYP mode for r8a7790 based boards
Oleksandr
- [U-Boot] [PATCH 2/3] ARM: rmobile: Add basic PSCI support for r8a7790 SoC
Oleksandr
- [U-Boot] [PATCH 1/3] ARM: rmobile: Switch CPU to non-secure HYP mode for r8a7790 based boards
Oleksandr
- [U-Boot] [PATCH 3/3] ARM: rmobile: Add possibility to debug main PSCI commands
Oleksandr
- [U-Boot] [PATCH 2/3] ARM: rmobile: Add basic PSCI support for r8a7790 SoC
Oleksandr
- [U-Boot] [PATCH 2/3] ARM: rmobile: Add basic PSCI support for r8a7790 SoC
Oleksandr
- [U-Boot] [PATCH 1/3] ARM: rmobile: Switch CPU to non-secure HYP mode for r8a7790 based boards
Oleksandr
- [U-Boot] [PATCH 1/3] ARM: rmobile: Switch CPU to non-secure HYP mode for r8a7790 based boards
Oleksandr
- [U-Boot] [PATCH 1/3] ARM: rmobile: Switch CPU to non-secure HYP mode for r8a7790 based boards
Oleksandr
- [U-Boot] [PATCH 2/3] ARM: rmobile: Add basic PSCI support for r8a7790 SoC
Oleksandr
- [U-Boot] [PATCH v4 3/3] cmd: mdio: Add new parameter to access MMD PHY registers
Vladimir Oltean
- [U-Boot] [PATCH v4 3/3] cmd: mdio: Add new parameter to access MMD PHY registers
Vladimir Oltean
- [U-Boot] [PATCH v4 3/3] cmd: mdio: Add new parameter to access MMD PHY registers
Vladimir Oltean
- [U-Boot] [PATCH v5 3/3] cmd: mdio: Switch to generic helpers when accessing the registers
Vladimir Oltean
- [U-Boot] [PATCH v5 3/3] cmd: mdio: Switch to generic helpers when accessing the registers
Vladimir Oltean
- [U-Boot] [PATCH v3] net: phy: add TSE PCS support to dwmac-socfpga
Ooi, Joyce
- [U-Boot] [PATCH v3] net: phy: add TSE PCS support to dwmac-socfpga
Ooi, Joyce
- [U-Boot] [PATCH v4 1/1] avb: add support for named persistent values
Igor Opaniuk
- [U-Boot] [U-Boot, v4, 1/1] avb: add support for named persistent values
Igor Opaniuk
- [U-Boot] [U-Boot, v4, 1/1] avb: add support for named persistent values
Igor Opaniuk
- [U-Boot] [PATCH 1/1] test: let use gdbserver for all sandbox targets
Igor Opaniuk
- [U-Boot] [U-Boot, v4, 1/1] avb: add support for named persistent values
Igor Opaniuk
- [U-Boot] [PATCH v5 1/1] avb: add support for named persistent values
Igor Opaniuk
- [U-Boot] [U-Boot, v4, 1/1] avb: add support for named persistent values
Igor Opaniuk
- [U-Boot] [PATCH v3 0/7] android: implement A/B boot process
Igor Opaniuk
- [U-Boot] [PATCH v3 1/7] cmd: part: Add 'number' sub-command
Igor Opaniuk
- [U-Boot] [PATCH v3 2/7] disk: part: Extend API to get partition info
Igor Opaniuk
- [U-Boot] [PATCH v3 3/7] common: Implement A/B metadata
Igor Opaniuk
- [U-Boot] [PATCH v3 4/7] cmd: Add 'ab_select' command
Igor Opaniuk
- [U-Boot] [PATCH v3 5/7] test/py: Add base test case for A/B updates
Igor Opaniuk
- [U-Boot] [PATCH v3 6/7] doc: android: Add simple guide for A/B updates
Igor Opaniuk
- [U-Boot] [PATCH v3 7/7] env: am57xx: Implement A/B boot process
Igor Opaniuk
- [U-Boot] [PATCH] net: mv88e61xx: fix autonegotiation on ports
Chris Packham
- [U-Boot] [PATCH v2 1/2] Kconfig: Migrate CONFIG_BUILD_TARGET
Chris Packham
- [U-Boot] [PATCH] ARM: mvebu: x530: use MV_DDR_FREQ_SAR
Chris Packham
- [U-Boot] [PATCH] Kconfig: mvebu: use SPL instead of SPL_BUILD
Chris Packham
- [U-Boot] [PATCH v2 1/2] Kconfig: Migrate CONFIG_BUILD_TARGET
Chris Packham
- [U-Boot] [PATCH 0/2] x530: Enable watchdog
Chris Packham
- [U-Boot] [PATCH 1/2] watchdog: orion_wdt: support SPL usage
Chris Packham
- [U-Boot] [PATCH 2/2] arm: mvebu: x530: Enable watchdog in SPL and U-Boot
Chris Packham
- [U-Boot] [PATCH 2/2] arm: mvebu: x530: Enable watchdog in SPL and U-Boot
Chris Packham
- [U-Boot] [PATCH 0/4] Marvell DB-XC3-24G4XG board support
Chris Packham
- [U-Boot] [PATCH 1/4] arm: sync armada-xp dts files from Linux 5.0
Chris Packham
- [U-Boot] [PATCH 2/4] arm: mvebu: Add Marvell's integrated CPUs
Chris Packham
- [U-Boot] [PATCH 3/4] arm: mvebu: NAND clock support for MSYS devices
Chris Packham
- [U-Boot] [PATCH 4/4] arm: mvebu: Add DB-XC3-24G4XG board
Chris Packham
- [U-Boot] [PATCH 2/2] arm: mvebu: x530: Enable watchdog in SPL and U-Boot
Chris Packham
- [U-Boot] [PATCH 2/2] arm: mvebu: x530: Enable watchdog in SPL and U-Boot
Chris Packham
- [U-Boot] [PATCH 2/4] arm: mvebu: Add Marvell's integrated CPUs
Chris Packham
- [U-Boot] [PATCH 4/4] arm: mvebu: Add DB-XC3-24G4XG board
Chris Packham
- [U-Boot] [PATCH 2/2] arm: mvebu: x530: Enable watchdog in SPL and U-Boot
Chris Packham
- [U-Boot] [PATCH v2 0/2] x530: Enable watchdog
Chris Packham
- [U-Boot] [PATCH v2 1/2] watchdog: orion_wdt: support SPL usage
Chris Packham
- [U-Boot] [PATCH v2 2/2] arm: mvebu: x530: Enable watchdog in SPL and U-Boot
Chris Packham
- [U-Boot] [PATCH v2 0/5] Marvell DB-XC3-24G4XG board support
Chris Packham
- [U-Boot] [PATCH v2 1/5] arm: sync armada-xp dts files from Linux 5.0
Chris Packham
- [U-Boot] [PATCH v2 2/5] arm: mvebu: Add Marvell's integrated CPUs
Chris Packham
- [U-Boot] [PATCH v2 3/5] arm: mvebu: NAND clock support for MSYS devices
Chris Packham
- [U-Boot] [PATCH v2 4/5] tools: kwbimage: don't adjust for image_header for Armada MSYS
Chris Packham
- [U-Boot] [PATCH v2 5/5] arm: mvebu: Add DB-XC3-24G4XG board
Chris Packham
- [U-Boot] [PATCH v3 0/3] x530: Enable watchdog
Chris Packham
- [U-Boot] [PATCH v3 1/3] watchdog: orion_wdt: support SPL usage
Chris Packham
- [U-Boot] [PATCH v3 2/3] watchdog: orion_wdt: take timeout value in ms
Chris Packham
- [U-Boot] [PATCH v3 3/3] arm: mvebu: x530: Enable watchdog in SPL and U-Boot
Chris Packham
- [U-Boot] [PATCH] dm: Fix typo 'Watchdot' -> 'Watchdog'
Chris Packham
- [U-Boot] [PATCH v4 0/3] x530: Enable watchdog
Chris Packham
- [U-Boot] [PATCH v4 1/3] watchdog: orion_wdt: support SPL usage
Chris Packham
- [U-Boot] [PATCH v4 2/3] watchdog: orion_wdt: take timeout value in ms
Chris Packham
- [U-Boot] [PATCH v4 3/3] arm: mvebu: x530: Enable watchdog in SPL and U-Boot
Chris Packham
- [U-Boot] [PATCH v4 2/3] watchdog: orion_wdt: take timeout value in ms
Chris Packham
- [U-Boot] [PATCH v4 2/3] watchdog: orion_wdt: take timeout value in ms
Chris Packham
- [U-Boot] [PATCH v2 4/5] tools: kwbimage: don't adjust for image_header for Armada MSYS
Chris Packham
- [U-Boot] [PATCH v3] tools: kwbimage: don't adjust for image_header for Armada MSYS
Chris Packham
- [U-Boot] Commit "arm: kirkwood: configs: dreamplug: Convert to DM_SPI" breaks u-boot on Dreamplug
Chris Packham
- [U-Boot] [PATCH] ARM: kirkwood: add spi0 alias for dreamplug
Chris Packham
- [U-Boot] Commit "ARM: CPU: arm926ejs: Consolidate cache routines to common file" breaks u-boot on Dreamplug
Chris Packham
- [U-Boot] Marvell DDR training custom ODT configuration
Chris Packham
- [U-Boot] [PATCH] ARM: kirkwood: add spi0 alias for dreamplug
Chris Packham
- [U-Boot] [PATCH 1/2] mv_ddr: ddr3: fix tRAS timimg parameter
Chris Packham
- [U-Boot] [PATCH 2/2] mv_ddr: ddr3: only use active chip-selects when tuning ODT
Chris Packham
- [U-Boot] Marvell DDR training custom ODT configuration
Chris Packham
- [U-Boot] db-88f6820-amc doesn't boot on latest u-boot/master
Chris Packham
- [U-Boot] [PATCH 0/3] ARC: DM_MMC migration
Eugeniy Paltsev
- [U-Boot] [PATCH 1/3] ARC: dwmmc: Adding DesignWare MMC driver support for ARC devboards
Eugeniy Paltsev
- [U-Boot] [PATCH 2/3] ARC: [plat-hsdk]: migrate to DM_MMC
Eugeniy Paltsev
- [U-Boot] [PATCH 3/3] ARC: [plat-axs10x]: migrate to DM_MMC
Eugeniy Paltsev
- [U-Boot] [PATCH 0/6] Add support for MT8516 SoCs
Fabien Parent
- [U-Boot] [PATCH 1/6] mmc: mtk-sd: add source_cg clock support
Fabien Parent
- [U-Boot] [PATCH 2/6] mmc: mtk-sd: add support for MT8516
Fabien Parent
- [U-Boot] [PATCH 3/6] clk: mediatek: add support for CLK_GATE_SETCLR_INV flag
Fabien Parent
- [U-Boot] [PATCH 4/6] clk: mediatek: add driver for MT8516
Fabien Parent
- [U-Boot] [PATCH 5/6] pinctrl: add driver for MT8516
Fabien Parent
- [U-Boot] [PATCH 6/6] ARM: MediaTek: Add support for MT8516 SoC
Fabien Parent
- [U-Boot] [PATCH v2 0/6] Add support for MT8516 SoCs
Fabien Parent
- [U-Boot] [PATCH v2 1/6] mmc: mtk-sd: add source_cg clock support
Fabien Parent
- [U-Boot] [PATCH v2 2/6] mmc: mtk-sd: add support for MT8516
Fabien Parent
- [U-Boot] [PATCH v2 3/6] clk: mediatek: add support for SETCLR_INV and NO_SETCLR flags
Fabien Parent
- [U-Boot] [PATCH v2 4/6] clk: mediatek: add driver for MT8516
Fabien Parent
- [U-Boot] [PATCH v2 5/6] pinctrl: add driver for MT8516
Fabien Parent
- [U-Boot] [PATCH v2 6/6] ARM: MediaTek: Add support for MT8516 SoC
Fabien Parent
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Anup Patel
- [U-Boot] [PATCH 04/11] net: macb: Fix clk API usage for RISC-V systems
Anup Patel
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Anup Patel
- [U-Boot] [PATCH v2 07/11] clk: Add fixed-factor clock driver
Anup Patel
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Anup Patel
- [U-Boot] [PATCH v5 00/15] SiFive FU540 Support
Anup Patel
- [U-Boot] [PATCH v5 01/15] .gitignore: Don't ignore arch/riscv/include/asm/arch
Anup Patel
- [U-Boot] [PATCH v5 02/15] Makefile: Fix mrproper make target
Anup Patel
- [U-Boot] [PATCH v5 03/15] riscv: Rename cpu/qemu to cpu/generic
Anup Patel
- [U-Boot] [PATCH v5 04/15] riscv: Add asm/dma-mapping.h for DMA mappings
Anup Patel
- [U-Boot] [PATCH v5 05/15] riscv: Add place-holder asm/arch/clk.h for driver compilation
Anup Patel
- [U-Boot] [PATCH v5 06/15] riscv: generic: Ensure that U-Boot runs within 4GB for 64bit systems
Anup Patel
- [U-Boot] [PATCH v5 07/15] net: macb: Fix clk API usage for RISC-V systems
Anup Patel
- [U-Boot] [PATCH v5 08/15] net: macb: Fix GEM hardware detection
Anup Patel
- [U-Boot] [PATCH v5 09/15] clk: Add SiFive FU540 PRCI clock driver
Anup Patel
- [U-Boot] [PATCH v5 10/15] clk: Add fixed-factor clock driver
Anup Patel
- [U-Boot] [PATCH v5 11/15] drivers: serial_sifive: Fix baud rate calculation
Anup Patel
- [U-Boot] [PATCH v5 12/15] drivers: serial_sifive: Skip baudrate config if no input clock
Anup Patel
- [U-Boot] [PATCH v5 13/15] cpu: Bind timer driver for boot hart
Anup Patel
- [U-Boot] [PATCH v5 14/15] riscv: Add SiFive FU540 board support
Anup Patel
- [U-Boot] [PATCH v5 15/15] doc: Add a readme guide for SiFive FU540
Anup Patel
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Anup Patel
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Anup Patel
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Anup Patel
- [U-Boot] [PATCH v5 00/15] SiFive FU540 Support
Anup Patel
- [U-Boot] [PATCH v5 00/15] SiFive FU540 Support
Anup Patel
- [U-Boot] [PATCH v6 00/16] SiFive FU540 Support
Anup Patel
- [U-Boot] [PATCH v6 01/16] .gitignore: Don't ignore arch/riscv/include/asm/arch
Anup Patel
- [U-Boot] [PATCH v6 02/16] Makefile: Fix mrproper make target
Anup Patel
- [U-Boot] [PATCH v6 03/16] riscv: Rename cpu/qemu to cpu/generic
Anup Patel
- [U-Boot] [PATCH v6 04/16] riscv: Add asm/dma-mapping.h for DMA mappings
Anup Patel
- [U-Boot] [PATCH v6 05/16] riscv: Add place-holder asm/arch/clk.h for driver compilation
Anup Patel
- [U-Boot] [PATCH v6 06/16] riscv: generic: Ensure that U-Boot runs within 4GB for 64bit systems
Anup Patel
- [U-Boot] [PATCH v6 07/16] net: macb: Fix clk API usage for RISC-V systems
Anup Patel
- [U-Boot] [PATCH v6 08/16] net: macb: Fix GEM hardware detection
Anup Patel
- [U-Boot] [PATCH v6 09/16] clk: Add SiFive FU540 PRCI clock driver
Anup Patel
- [U-Boot] [PATCH v6 10/16] clk: Add fixed-factor clock driver
Anup Patel
- [U-Boot] [PATCH v6 11/16] drivers: serial_sifive: Fix baud rate calculation
Anup Patel
- [U-Boot] [PATCH v6 12/16] drivers: serial_sifive: Skip baudrate config if no input clock
Anup Patel
- [U-Boot] [PATCH v6 13/16] cpu: Bind timer driver for boot hart
Anup Patel
- [U-Boot] [PATCH v6 14/16] riscv: Add SiFive FU540 board support
Anup Patel
- [U-Boot] [PATCH v6 15/16] doc: Add a readme guide for SiFive FU540
Anup Patel
- [U-Boot] [PATCH v6 16/16] riscv: Enable CONFIG_SYS_BOOT_RAMDISK_HIGH for using initrd
Anup Patel
- [U-Boot] [PATCH v6 02/16] Makefile: Fix mrproper make target
Anup Patel
- [U-Boot] [PATCH v6 05/16] riscv: Add place-holder asm/arch/clk.h for driver compilation
Anup Patel
- [U-Boot] [PATCH v6 09/16] clk: Add SiFive FU540 PRCI clock driver
Anup Patel
- [U-Boot] [PATCH v7 00/15] SiFive FU540 Support
Anup Patel
- [U-Boot] [PATCH v7 01/15] riscv: Enable create symlink using kconfig
Anup Patel
- [U-Boot] [PATCH v7 02/15] riscv: Rename cpu/qemu to cpu/generic
Anup Patel
- [U-Boot] [PATCH v7 03/15] riscv: Add asm/dma-mapping.h for DMA mappings
Anup Patel
- [U-Boot] [PATCH v7 04/15] riscv: Add place-holder asm/arch/clk.h for driver compilation
Anup Patel
- [U-Boot] [PATCH v7 05/15] riscv: generic: Ensure that U-Boot runs within 4GB for 64bit systems
Anup Patel
- [U-Boot] [PATCH v7 06/15] net: macb: Fix clk API usage for RISC-V systems
Anup Patel
- [U-Boot] [PATCH v7 07/15] net: macb: Fix GEM hardware detection
Anup Patel
- [U-Boot] [PATCH v7 08/15] clk: Add SiFive FU540 PRCI clock driver
Anup Patel
- [U-Boot] [PATCH v7 09/15] clk: Add fixed-factor clock driver
Anup Patel
- [U-Boot] [PATCH v7 10/15] drivers: serial_sifive: Fix baud rate calculation
Anup Patel
- [U-Boot] [PATCH v7 11/15] drivers: serial_sifive: Skip baudrate config if no input clock
Anup Patel
- [U-Boot] [PATCH v7 12/15] cpu: Bind timer driver for boot hart
Anup Patel
- [U-Boot] [PATCH v7 13/15] riscv: Add SiFive FU540 board support
Anup Patel
- [U-Boot] [PATCH v7 14/15] doc: Add a readme guide for SiFive FU540
Anup Patel
- [U-Boot] [PATCH v7 15/15] riscv: Enable CONFIG_SYS_BOOT_RAMDISK_HIGH for using initrd
Anup Patel
- [U-Boot] [PATCH 1/7] riscv: add infrastructure for calling functions on other harts
Anup Patel
- [U-Boot] [PATCH 5/7] riscv: add support for multi-hart systems
Anup Patel
- [U-Boot] [PATCH 2/7] riscv: import the supervisor binary interface header file
Anup Patel
- [U-Boot] [PATCH 3/7] riscv: implement IPI platform functions using SBI
Anup Patel
- [U-Boot] [PATCH 4/7] riscv: delay initialization of caches and debug UART
Anup Patel
- [U-Boot] [PATCH 6/7] riscv: boot images passed to bootm on all harts
Anup Patel
- [U-Boot] [PATCH 7/7] riscv: qemu: enable SMP
Anup Patel
- [U-Boot] [PATCH v7 00/15] SiFive FU540 Support
Anup Patel
- [U-Boot] [PATCH] riscv: fu540: enable SMP
Anup Patel
- [U-Boot] [PATCH v7 00/15] SiFive FU540 Support
Anup Patel
- [U-Boot] [PATCH v7 00/15] SiFive FU540 Support
Anup Patel
- [U-Boot] [PATCH 1/7] riscv: add infrastructure for calling functions on other harts
Anup Patel
- [U-Boot] [PATCH 1/7] riscv: add infrastructure for calling functions on other harts
Anup Patel
- [U-Boot] [PATCH 1/7] riscv: add infrastructure for calling functions on other harts
Anup Patel
- [U-Boot] [PATCH 1/7] riscv: add infrastructure for calling functions on other harts
Anup Patel
- [U-Boot] [PATCH v5 02/15] Makefile: Fix mrproper make target
Anup Patel
- [U-Boot] [PATCH v5 10/15] clk: Add fixed-factor clock driver
Anup Patel
- [U-Boot] [PATCH v8 00/15] SiFive FU540 Support
Anup Patel
- [U-Boot] [PATCH v8 01/15] riscv: Enable create symlink using kconfig
Anup Patel
- [U-Boot] [PATCH v8 02/15] riscv: Rename cpu/qemu to cpu/generic
Anup Patel
- [U-Boot] [PATCH v8 03/15] riscv: Add asm/dma-mapping.h for DMA mappings
Anup Patel
- [U-Boot] [PATCH v8 04/15] riscv: Add place-holder asm/arch/clk.h for driver compilation
Anup Patel
- [U-Boot] [PATCH v8 05/15] riscv: generic: Ensure that U-Boot runs within 4GB for 64bit systems
Anup Patel
- [U-Boot] [PATCH v8 06/15] net: macb: Fix clk API usage for RISC-V systems
Anup Patel
- [U-Boot] [PATCH v8 07/15] net: macb: Fix GEM hardware detection
Anup Patel
- [U-Boot] [PATCH v8 08/15] clk: Add SiFive FU540 PRCI clock driver
Anup Patel
- [U-Boot] [PATCH v8 09/15] clk: Add fixed-factor clock driver
Anup Patel
- [U-Boot] [PATCH v8 10/15] drivers: serial_sifive: Fix baud rate calculation
Anup Patel
- [U-Boot] [PATCH v8 11/15] drivers: serial_sifive: Skip baudrate config if no input clock
Anup Patel
- [U-Boot] [PATCH v8 12/15] cpu: Bind timer driver for boot hart
Anup Patel
- [U-Boot] [PATCH v8 13/15] riscv: Add SiFive FU540 board support
Anup Patel
- [U-Boot] [PATCH v8 14/15] doc: Add a readme guide for SiFive FU540
Anup Patel
- [U-Boot] [PATCH v8 15/15] riscv: Enable CONFIG_SYS_BOOT_RAMDISK_HIGH for using initrd
Anup Patel
- [U-Boot] [PATCH v8 09/15] clk: Add fixed-factor clock driver
Anup Patel
- [U-Boot] [PATCH v9 00/15] SiFive FU540 Support
Anup Patel
- [U-Boot] [PATCH v9 01/15] riscv: Enable create symlink using kconfig
Anup Patel
- [U-Boot] [PATCH v9 02/15] riscv: Rename cpu/qemu to cpu/generic
Anup Patel
- [U-Boot] [PATCH v9 03/15] riscv: Add asm/dma-mapping.h for DMA mappings
Anup Patel
- [U-Boot] [PATCH v9 04/15] riscv: Add place-holder asm/arch/clk.h for driver compilation
Anup Patel
- [U-Boot] [PATCH v9 05/15] riscv: generic: Ensure that U-Boot runs within 4GB for 64bit systems
Anup Patel
- [U-Boot] [PATCH v9 06/15] net: macb: Fix clk API usage for RISC-V systems
Anup Patel
- [U-Boot] [PATCH v9 07/15] net: macb: Fix GEM hardware detection
Anup Patel
- [U-Boot] [PATCH v9 08/15] clk: Add SiFive FU540 PRCI clock driver
Anup Patel
- [U-Boot] [PATCH v9 09/15] clk: Add fixed-factor clock driver
Anup Patel
- [U-Boot] [PATCH v9 10/15] drivers: serial_sifive: Fix baud rate calculation
Anup Patel
- [U-Boot] [PATCH v9 11/15] drivers: serial_sifive: Skip baudrate config if no input clock
Anup Patel
- [U-Boot] [PATCH v9 12/15] cpu: Bind timer driver for boot hart
Anup Patel
- [U-Boot] [PATCH v9 13/15] riscv: Add SiFive FU540 board support
Anup Patel
- [U-Boot] [PATCH v9 14/15] doc: Add a readme guide for SiFive FU540
Anup Patel
- [U-Boot] [PATCH v9 15/15] riscv: Enable CONFIG_SYS_BOOT_RAMDISK_HIGH for using initrd
Anup Patel
- [U-Boot] SiFive FU540 U-Boot patches,
Anup Patel
- [U-Boot] SiFive FU540 U-Boot patches,
Anup Patel
- [U-Boot] [PATCH v10 00/15] SiFive FU540 Support
Anup Patel
- [U-Boot] [PATCH v10 01/15] riscv: Enable create symlink using kconfig
Anup Patel
- [U-Boot] [PATCH v10 02/15] riscv: Rename cpu/qemu to cpu/generic
Anup Patel
- [U-Boot] [PATCH v10 03/15] riscv: Add asm/dma-mapping.h for DMA mappings
Anup Patel
- [U-Boot] [PATCH v10 04/15] riscv: Add place-holder asm/arch/clk.h for driver compilation
Anup Patel
- [U-Boot] [PATCH v10 05/15] riscv: generic: Ensure that U-Boot runs within 4GB for 64bit systems
Anup Patel
- [U-Boot] [PATCH v10 06/15] net: macb: Fix clk API usage for RISC-V systems
Anup Patel
- [U-Boot] [PATCH v10 07/15] net: macb: Fix GEM hardware detection
Anup Patel
- [U-Boot] [PATCH v10 08/15] clk: Add SiFive FU540 PRCI clock driver
Anup Patel
- [U-Boot] [PATCH v10 09/15] clk: Add fixed-factor clock driver
Anup Patel
- [U-Boot] [PATCH v10 10/15] drivers: serial_sifive: Fix baud rate calculation
Anup Patel
- [U-Boot] [PATCH v10 11/15] drivers: serial_sifive: Skip baudrate config if no input clock
Anup Patel
- [U-Boot] [PATCH v10 12/15] cpu: Bind timer driver for boot hart
Anup Patel
- [U-Boot] [PATCH v10 13/15] riscv: Add SiFive FU540 board support
Anup Patel
- [U-Boot] [PATCH v10 14/15] doc: Add a readme guide for SiFive FU540
Anup Patel
- [U-Boot] [PATCH v10 15/15] riscv: Enable CONFIG_SYS_BOOT_RAMDISK_HIGH for using initrd
Anup Patel
- [U-Boot] SiFive FU540 U-Boot patches,
Anup Patel
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Atish Patra
- [U-Boot] [PATCH v6 15/16] doc: Add a readme guide for SiFive FU540
Atish Patra
- [U-Boot] [PATCH v7 14/15] doc: Add a readme guide for SiFive FU540
Atish Patra
- [U-Boot] [PATCH v7 14/15] doc: Add a readme guide for SiFive FU540
Atish Patra
- [U-Boot] [PATCH] MAINTAINERS: Update u-boot-marvell entry
Luka Perkov
- [U-Boot] [PATCH] lib/crc16: use non-C99 loop style
Thomas Petazzoni
- [U-Boot] [PATCH] lib/crc16: use non-C99 loop style
Thomas Petazzoni
- [U-Boot] [PATCH v3 0/7] android: implement A/B boot process
Sam Protsenko
- [U-Boot] [RESEND PATCH 0/3] arm: Introduce writel/readl_relaxed accessors
Andre Przywara
- [U-Boot] [RESEND PATCH 1/3] arm: clean up asm/io.h
Andre Przywara
- [U-Boot] [RESEND PATCH 2/3] arm: introduce _relaxed MMIO accessors
Andre Przywara
- [U-Boot] [RESEND PATCH 3/3] sunxi: H6: use writel_relaxed for DRAM timing register accesses
Andre Przywara
- [U-Boot] [PATCH v2 0/4] sunxi: SPI: Add SUN6I generation SPI support
Andre Przywara
- [U-Boot] [PATCH v2 1/4] spi: sunxi: Enable and disable SPI clock on bus claim/release
Andre Przywara
- [U-Boot] [PATCH v2 2/4] clk: sunxi: Implement SPI gates clocks and reset
Andre Przywara
- [U-Boot] [PATCH v2 3/4] spi: sunxi: Add CLK support to Allwinner SPI driver
Andre Przywara
- [U-Boot] [PATCH v2 4/4] spi: sunxi: Support newer SoCs
Andre Przywara
- [U-Boot] [PATCH 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1
Andre Przywara
- [U-Boot] [PATCH 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1
Andre Przywara
- [U-Boot] [linux-sunxi] [PATCH v2 0/4] sunxi: SPI: Add SUN6I generation SPI support
Andre Przywara
- [U-Boot] [PATCH 07/10] spi: sun4: Add A31 spi controller support
Andre Przywara
- [U-Boot] [PATCH] sunxi: update SATA driver to always use DM_SCSI
Andre Przywara
- [U-Boot] [PATCH V2 3/3] sunxi: Fix A33 memory initialization
Andre Przywara
- [U-Boot] [PATCH v2 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1
Andre Przywara
- [U-Boot] [PATCH V2 3/3] sunxi: Fix A33 memory initialization
Andre Przywara
- [U-Boot] ARMv8 linking: how to properly accommodate the exception vector table?
Andre Przywara
- [U-Boot] ARMv8 linking: how to properly accommodate the exception vector table?
Andre Przywara
- [U-Boot] [PATCH 0/9] sunxi: Allow FEL capable SPLs with 32bit builds
Andre Przywara
- [U-Boot] [PATCH 1/9] armv8: Disable exception vectors in SPL by default
Andre Przywara
- [U-Boot] [PATCH 2/9] Makefile: use "arm64" architecture for U-Boot image files
Andre Przywara
- [U-Boot] [PATCH 3/9] SPL: read and store arch property from U-Boot image
Andre Przywara
- [U-Boot] [PATCH 4/9] sunxi: introduce RMR switch to enter payloads in 64-bit mode
Andre Przywara
- [U-Boot] [PATCH 5/9] sunxi: allow FIT image for 32-bit builds as well
Andre Przywara
- [U-Boot] [PATCH 6/9] sunxi: allow 32-bit builds for 64-bit SoCs
Andre Przywara
- [U-Boot] [PATCH 7/9] sunxi: H5: add generic H5 32-bit SPL defconfig
Andre Przywara
- [U-Boot] [PATCH 8/9] sunxi: A64: add generic A64 32-bit SPL defconfigs
Andre Przywara
- [U-Boot] [PATCH 9/9] sunxi: H6: add generic H6 32-bit SPL defconfig
Andre Przywara
- [U-Boot] [PATCH 3/9] SPL: read and store arch property from U-Boot image
Andre Przywara
- [U-Boot] [PATCH 4/9] sunxi: introduce RMR switch to enter payloads in 64-bit mode
Andre Przywara
- [U-Boot] [PATCH 6/9] sunxi: allow 32-bit builds for 64-bit SoCs
Andre Przywara
- [U-Boot] [PATCH 2/3] arm: introduce _relaxed MMIO accessors
André Przywara
- [U-Boot] [PATCH 01/10] spi: sun4i: Poll for rxfifo empty
André Przywara
- [U-Boot] [PATCH 02/10] clk: sunxi: Implement SPI clocks, resets
André Przywara
- [U-Boot] [PATCH 03/10] spi: sun4i: Simplify reg writes using set/clrbits_le32
André Przywara
- [U-Boot] [PATCH 04/10] spi: sun4i: Access registers and bits via enum offsets
André Przywara
- [U-Boot] [PATCH 05/10] spi: sun4i: Support fifo_depth via drvdata
André Przywara
- [U-Boot] [PATCH 06/10] spi: sun4i: Add CLK support
André Przywara
- [U-Boot] [PATCH 07/10] spi: sun4: Add A31 spi controller support
André Przywara
- [U-Boot] [PATCH 08/10] spi: sun4i: Driver cleanup
André Przywara
- [U-Boot] [PATCH 09/10] spi: kconfig: Enable SUN4I_SPI by default if ARCH_SUNXI
André Przywara
- [U-Boot] [PATCH 10/10] board: sopine: Enable SPI/SPI-FLASH
André Przywara
- [U-Boot] [PATCH V2 3/3] sunxi: Fix A33 memory initialization
André Przywara
- [U-Boot] [PATCH v2 1/8] spi: sun4i: Poll for rxfifo empty
André Przywara
- [U-Boot] [PATCH v2 4/8] spi: sun4i: Access registers and bits via enum offsets
André Przywara
- [U-Boot] [PATCH v2 6/8] spi: sun4i: Add CLK support
André Przywara
- [U-Boot] [PATCH v2 7/8] spi: sun4: Add A31 spi controller support
André Przywara
- [U-Boot] [PATCH v2 8/8] spi: sun4i: Driver cleanup
André Przywara
- [U-Boot] [PATCH v2] armv8: Disable exception vectors in SPL by default
André Przywara
- [U-Boot] [PATCH 5/9] sunxi: allow FIT image for 32-bit builds as well
André Przywara
- [U-Boot] [PATCH v3 00/20] SF: Migrate to Linux SPI NOR framework
Vignesh R
- [U-Boot] [PATCH v3 16/20] mtd: spi: Add lightweight SPI flash stack for SPL
Vignesh R
- [U-Boot] [PATCH v3 19/20] configs: Don't use SPI_FLASH_BAR as default
Vignesh R
- [U-Boot] [PATCH v4 00/20] SF: Migrate to Linux SPI NOR framework
Vignesh R
- [U-Boot] [PATCH v4 01/20] configs: Move CONFIG_SPI_FLASH into defconfigs
Vignesh R
- [U-Boot] [PATCH v4 02/20] bitops: Fix GENMASK definition for Sandbox
Vignesh R
- [U-Boot] [PATCH v4 03/20] spi: spi-mem: Allow use of spi_mem_exec_op for all SPI modes
Vignesh R
- [U-Boot] [PATCH v4 04/20] spi: spi-mem: Extend spi_mem_adjust_op_size() to honor max xfer size
Vignesh R
- [U-Boot] [PATCH v4 05/20] spi: spi-mem: Claim SPI bus before spi mem access
Vignesh R
- [U-Boot] [PATCH v4 06/20] spi: Add non DM version of SPI_MEM
Vignesh R
- [U-Boot] [PATCH v4 07/20] sh: bitops: add hweight*() macros
Vignesh R
- [U-Boot] [PATCH v4 08/20] mtd: spi: Port SPI NOR framework from Linux
Vignesh R
- [U-Boot] [PATCH v4 09/20] mtd: spi: spi-nor-core: Add SPI MEM support
Vignesh R
- [U-Boot] [PATCH v4 10/20] mtd: spi: spi-nor-core: Add 4 Byte addressing support
Vignesh R
- [U-Boot] [PATCH v4 11/20] mtd: spi: spi-nor-core: Add SFDP support
Vignesh R
- [U-Boot] [PATCH v4 12/20] mtd: spi: spi-nor-core: Add back U-Boot specific features
Vignesh R
- [U-Boot] [PATCH v4 13/20] mtd: spi: sf_probe: Add "jedec, spi-nor" compatible string
Vignesh R
- [U-Boot] [PATCH v4 14/20] mtd: spi: Switch to new SPI NOR framework
Vignesh R
- [U-Boot] [PATCH v4 15/20] mtd: spi: Remove unused files
Vignesh R
- [U-Boot] [PATCH v4 16/20] mtd: spi: Add lightweight SPI flash stack for SPL
Vignesh R
- [U-Boot] [PATCH v4 17/20] spl: Kconfig: Enable SPI_FLASH_TINY by default for SPL
Vignesh R
- [U-Boot] [PATCH v4 18/20] configs: Remove SF_DUAL_FLASH
Vignesh R
- [U-Boot] [PATCH v4 19/20] configs: Don't use SPI_FLASH_BAR as default
Vignesh R
- [U-Boot] [PATCH v4 20/20] MAINTAINERS: Add an entry for SPI NOR
Vignesh R
- [U-Boot] [PULL] Please pull u-boot-rockchip:tags/for-master-20190201
Vignesh R
- [U-Boot] [PATCH v4 0/7] AM65x: Add DMA support
Vignesh R
- [U-Boot] [PATCH v4 1/7] firmware: ti_sci: Add support for NAVSS resource management
Vignesh R
- [U-Boot] [PATCH v4 2/7] soc: ti: k3: add navss ringacc driver
Vignesh R
- [U-Boot] [PATCH v4 3/7] soc: ti: k3: add CPPI5 description and helpers
Vignesh R
- [U-Boot] [PATCH v4 4/7] dma: ti: add driver to K3 UDMA
Vignesh R
- [U-Boot] [PATCH v4 5/7] soc: keystone: Merge into ti specific directory
Vignesh R
- [U-Boot] [PATCH v4 6/7] arm64: dts: ti: k3-am65: add mcu navss nodes
Vignesh R
- [U-Boot] [PATCH v4 7/7] configs: am65x_evm_a53: Enable DMA related configs
Vignesh R
- [U-Boot] [PATCH v4 00/20] SF: Migrate to Linux SPI NOR framework
Vignesh R
- [U-Boot] [PATCH] mtd: add spi flash id s25f064l
Vignesh R
- [U-Boot] [PATCH v4 00/20] SF: Migrate to Linux SPI NOR framework
Vignesh R
- [U-Boot] [PATCH v4 14/20] mtd: spi: Switch to new SPI NOR framework
Vignesh R
- [U-Boot] [PATCH] mtd: qspi: support read the flag status in fspi driver
Vignesh R
- [U-Boot] [PATCH v2] mtd: add spi flash id s25fl064l
Vignesh R
- [U-Boot] cl-som-am57x_defconfig will be dropped
Vignesh R
- [U-Boot] [PATCH 0/2] ti_qspi: Move to spi-mem framework
Vignesh R
- [U-Boot] [PATCH 1/2] spi: ti_qspi: Drop non DM code
Vignesh R
- [U-Boot] [PATCH 2/2] spi: ti_qspi: Convert to spi-mem ops
Vignesh R
- [U-Boot] [PATCH 3/3] mtd: spi: Kconfig: Select SPI_FLASH if DM_SPI_FLASH
Vignesh R
- [U-Boot] [PATCH 2/3] mtd: spi: Kconfig: Update CONFIG_SPI_FLASH
Vignesh R
- [U-Boot] [PATCH 1/3] spi: Kconfig: Mark CONFIG_SPI as Legacy spi support
Vignesh R
- [U-Boot] [PATCH v1 1/2] configs: k2g_evm: Enable CONFIG_BLK
Vignesh R
- [U-Boot] [PATCH v4 14/20] mtd: spi: Switch to new SPI NOR framework
Vignesh R
- [U-Boot] [PATCH] sf: Add Macronix MX25R6435F SPI NOR flash to flash parameters array
Vignesh R
- [U-Boot] [PATCH v2 1/1] mtd: added missing GigaDevice chips
Vignesh R
- [U-Boot] [PATCH] treewide: Replace CONFIG_DM_SPI_FLASH with CONFIG_IS_ENABLED(DM_SPI_FLASH)
Vignesh R
- [U-Boot] [PATCH v4 00/25] MTD defconfigs/Kconfigs/Makefiles heavy cleanup
Vignesh R
- [U-Boot] [PATCH] configs: am57xx_evm: define CONFIG_SPL_LOAD_FIT_ADDRESS for SPL-DFU
Vignesh R
- [U-Boot] [PATCH] am57xx_evm_defconfig: Enable configs to support QSPI boot
Vignesh R
- [U-Boot] [PATCH] usb: udc-uclass: Fixed problem when no alias is defined in DT
Vignesh R
- [U-Boot] [PATCH] spi: cadence_qspi: Add quad write support
Vignesh R
- [U-Boot] [PATCH] driver: net: fsl-mc: Fix DPC MAC address fixup
Ioana Ciocoi Radulescu
- [U-Boot] [PATCH 1/5] drivers: usb: musb: Fail if the ctrl mod register is missing
Adrian Ratiu
- [U-Boot] [PATCH 2/5] drivers: usb: musb: Fix comparison between pointer and integer warn
Adrian Ratiu
- [U-Boot] [PATCH 3/5] spl: Add ability to disable SPL FAT
Adrian Ratiu
- [U-Boot] [PATCH 4/5] spl: Add common usb support in spl if needed
Adrian Ratiu
- [U-Boot] [PATCH 5/5] cmd: pxe: Increase MAX_TFTP_PATH_LEN to 256
Adrian Ratiu
- [U-Boot] [PATCH v4 00/25] MTD defconfigs/Kconfigs/Makefiles heavy cleanup
Miquel Raynal
- [U-Boot] [REGRESSION] tegra124: nyan-big: LPAE not working
Thierry Reding
- [U-Boot] [PATCH 1/2] bcm968580: rename to bcm968580xref
Philippe Reynes
- [U-Boot] [PATCH 2/2] bcm968580xref: switch to CONFIG_OF_SEPARATE
Philippe Reynes
- [U-Boot] [PATCH V2 1/2] bcm968580: rename to bcm968580xref
Philippe Reynes
- [U-Boot] [PATCH V2 2/2] bcm968580xref: switch to CONFIG_OF_SEPARATE
Philippe Reynes
- [U-Boot] [PATCH] bcm963158: use TARGET_BCM963158 instead of ARCH_BCM63158
Philippe Reynes
- [U-Boot] [PATCH] arm: dts: am33xx: add u-boot, dm-spl to ocp bus
Tom Rini
- [U-Boot] Please pull u-boot-video
Tom Rini
- [U-Boot] [PATCH 1/5] driver: net: ti: cpsw-mdio: use phys_addr_t for mdio_base addr
Tom Rini
- [U-Boot] [PATCH 2/5] net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driver
Tom Rini
- [U-Boot] [PATCH 3/5] arm64: dts: ti: k3-am65: add mcu cpsw node
Tom Rini
- [U-Boot] [PATCH 4/5] arm64: dts: k3-am654-base-board: add mcu cpsw nuss pinmux and phy defs
Tom Rini
- [U-Boot] [PATCH 5/5] configs: am65x_evm_a53: enable networking
Tom Rini
- [U-Boot] [PATCH v2 4/7] fs: ext4: constify the buffer passed to write functions
Tom Rini
- [U-Boot] [PATCH v2 1/7] fs: ext4: do not allow writes if metadata checksum is active
Tom Rini
- [U-Boot] [PATCH v2 2/7] test: fs: disable the metadata checksums on ext4 filesystems
Tom Rini
- [U-Boot] [PATCH v2 3/7] test: fs: run fsck after on fs image after the tests are run
Tom Rini
- [U-Boot] [PATCH v2 5/7] fs: ext4: Add support for the creation of symbolic links
Tom Rini
- [U-Boot] [PATCH v2 6/7] fs: Add a new command to create symbolic links
Tom Rini
- [U-Boot] [PATCH v2 7/7] test: fs: Added tests for symlinks
Tom Rini
- [U-Boot] [PATCH v2 1/7] fs: ext4: do not allow writes if metadata checksum is active
Tom Rini
- [U-Boot] [PATCH v3 2/7] soc: ti: k3: add navss ringacc driver
Tom Rini
- [U-Boot] [PATCH v3 3/7] soc: ti: k3: add CPPI5 description and helpers
Tom Rini
- [U-Boot] [PATCH v3 4/7] dma: ti: add driver to K3 UDMA
Tom Rini
- [U-Boot] [PATCH v3 5/7] soc: keystone: Merge into TI specific directory
Tom Rini
- [U-Boot] [PATCH v3 6/7] arm64: dts: ti: k3-am65: add mcu navss nodes
Tom Rini
- [U-Boot] [PATCH v3 7/7] configs: am65x_evm_a53: Enable DMA related configs
Tom Rini
- [U-Boot] [PATCH v2 1/2] Kconfig: Migrate CONFIG_BUILD_TARGET
Tom Rini
- [U-Boot] [PATCH v2 3/7] test: fs: run fsck after on fs image after the tests are run
Tom Rini
- [U-Boot] [PATCH v3 3/6] fs: ext4: constify the buffer passed to write functions
Tom Rini
- [U-Boot] [PATCH v4 01/20] common: spl_fit: Fix the spl_fit_image_get_os for FIT_IMAGE_TINY
Tom Rini
- [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support
Tom Rini
- [U-Boot] [U-Boot, v2, 2/2] Kconfig: Add u-boot.itb BUILD_TARGET for Rockchip
Tom Rini
- [U-Boot] [U-Boot,v2,1/2] Kconfig: Migrate CONFIG_BUILD_TARGET
Tom Rini
- [U-Boot] Kconfig: set default BUILD_TARGET for kirkwood
Tom Rini
- [U-Boot] [U-Boot, v1, 1/3] arm: dts: add am335x-shc.dts for shc board
Tom Rini
- [U-Boot] [U-Boot, v1, 2/3] ARM: dts: am335x-shc: add u-boot specific dtsi
Tom Rini
- [U-Boot] [U-Boot,v1,3/3] am335x, shc: adapt shc board to DM
Tom Rini
- [U-Boot] [U-Boot, v1, 1/4] usb: ether: call _usb_eth_halt() if initialization fails
Tom Rini
- [U-Boot] [U-Boot, v1, 2/4] ARM: DTS: am335x-evm: Use USB0 in peripheral mode
Tom Rini
- [U-Boot] [U-Boot, v1, 3/4] configs: am335x_evm: enable DM_USB_GADGET and USB_ETHER in u-boot and SPL
Tom Rini
- [U-Boot] [U-Boot, v1, 4/4] configs: removing am335x_evm_usbspl_defconfig
Tom Rini
- [U-Boot] [U-Boot, v2, 1/4] spl: Kconfig: Replace CONFIG_SPL_FAT_SUPPORT with CONFIG_SPL_FS_FAT
Tom Rini
- [U-Boot] [U-Boot, v2, 2/4] spl: fat/fs: Add option to include/exclude FAT write build in SPL
Tom Rini
- [U-Boot] [U-Boot, v2, 3/4] spl: Kconfig: Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPL_FS_EXT4
Tom Rini
- [U-Boot] [U-Boot, v2, 4/4] spl: fat/fs: Add control to build FS EXT4 in SPL
Tom Rini
- [U-Boot] ARM: am3517_evm: Enable DM_SPI and DM_USB
Tom Rini
- [U-Boot] ARM: dts: da850-evm: Re-sync with Kernel 5.0
Tom Rini
- [U-Boot] ARM: DTS: Resync am3517-evm.dts with Linux 5.0-rc3
Tom Rini
- [U-Boot] [U-Boot, v1, 1/3] ARM: DTS: am43xx: Add aliases for the USB ports
Tom Rini
- [U-Boot] [U-Boot, v1, 2/3] ARM: DTS: am43xx: Enable the DTS entries for USB port #2 in SPL
Tom Rini
- [U-Boot] regulator: pbias: Handle extended drain IO when changing omap36 PBIAS
Tom Rini
- [U-Boot] [U-Boot, 1/5] tools: dumpimage: Provide more feedback on error
Tom Rini
- [U-Boot] [U-Boot,2/5] tools: dumpimage: Simplify arguments
Tom Rini
- [U-Boot] [U-Boot, 3/5] tools: dumpimage: Simplify internal logic
Tom Rini
- [U-Boot] [U-Boot, 4/5] tools: dumpimage: Add help option and make error paths consistent
Tom Rini
- [U-Boot] [U-Boot,5/5] tools: dumpimage: Clarify help
Tom Rini
- [U-Boot] lmb: handle more than one DRAM BANK
Tom Rini
- [U-Boot] [PATCH v2 2/2] test: lib: lmb: add lmb test for multiple RAM banks
Tom Rini
- [U-Boot] [PATCH 1/3] configs: am65x_evm_r5: Enable GPT support
Tom Rini
- [U-Boot] [PATCH 2/3] am65x_evm: Allow bootm to load larger kernels
Tom Rini
- [U-Boot] [PATCH 3/3] armv7R: K3: am654: Fix order of debug elements in x509 template
Tom Rini
- [U-Boot] [PULL] u-boot-mips
Tom Rini
- [U-Boot] [PULL] Please pull u-boot-rockchip:tags/for-master-20190201
Tom Rini
- [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support
Tom Rini
- [U-Boot] [PATCH v3 2/5] net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driver
Tom Rini
- [U-Boot] [PATCH v4 3/6] fs: ext4: constify the buffer passed to write functions
Tom Rini
- [U-Boot] [PATCH v3 3/6] fs: ext4: constify the buffer passed to write functions
Tom Rini
- [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support
Tom Rini
- [U-Boot] [PATCH] MAINTAINERS: Change fsl-qoriq, mpc85xx, mpc86xx maintainers
Tom Rini
- [U-Boot] [PATCH v2] MAINTAINERS: Change fsl-qoriq, mpc85xx, mpc86xx maintainers
Tom Rini
- [U-Boot] [PATCH] test: fs: Add filesystem integrity checks
Tom Rini
- [U-Boot] [PATCH v4 00/20] SF: Migrate to Linux SPI NOR framework
Tom Rini
- [U-Boot] [PATCH v4 4/7] dma: ti: add driver to K3 UDMA
Tom Rini
- [U-Boot] [PATCH v2 09/13] mmc: sdhci: Make set_ios_post() return int
Tom Rini
- [U-Boot] [PATCH v2 12/13] mmc: sdhci: Add support for HOST_CONTROL2 and setting UHS timings
Tom Rini
- [U-Boot] [ANN] U-Boot v2019.04-rc1 released
Tom Rini
- [U-Boot] [PULL] Please pull u-boot-rockchip: tags/for-master-20190205
Tom Rini
- [U-Boot] Please pull u-boot-marvell/master
Tom Rini
- [U-Boot] [PATCH v2] arm: dts: am33xx: introduce 'am33xx-u-boot.dtsi'
Tom Rini
- [U-Boot] Pull request: u-boot-spi/master
Tom Rini
- [U-Boot] [U-Boot, v2] MAINTAINERS: Change fsl-qoriq, mpc85xx, mpc86xx maintainers
Tom Rini
- [U-Boot] MAINTAINERS: update u-boot-atmel tree
Tom Rini
- [U-Boot] [U-Boot,1/3] stm32mp1: add trusted boot with TF-A
Tom Rini
- [U-Boot] [PATCH 6/6] ARM: MediaTek: Add support for MT8516 SoC
Tom Rini
- [U-Boot] cmd: image_info: Add checking of default FIT config
Tom Rini
- [U-Boot] [U-Boot,v2] spl: implement CRC check on U-Boot uImage
Tom Rini
- [U-Boot] [U-Boot,v2] spl: implement CRC check on U-Boot uImage
Tom Rini
- [U-Boot] [U-Boot, 2/3] net: add higmacv300 Ethernet driver for HiSilicon platform
Tom Rini
- [U-Boot] [PULL] u-boot-sh/master
Tom Rini
- [U-Boot] [PULL] u-boot-sh/master
Tom Rini
- [U-Boot] [U-Boot, v4, 1/1] avb: add support for named persistent values
Tom Rini
- [U-Boot] [U-Boot,v2] spl: implement CRC check on U-Boot uImage
Tom Rini
- [U-Boot] [U-Boot, V3, 1/6] watchdog: bcm6345: switch to raw I/O functions
Tom Rini
- [U-Boot] [U-Boot, V3, 2/6] watchdog: bcm6345: allow to use this driver on arm bcm6858
Tom Rini
- [U-Boot] [U-Boot,V3,3/6] dt: bcm6838: add watchdog
Tom Rini
- [U-Boot] [U-Boot,V3,4/6] dt: bcm6858: add watchdog
Tom Rini
- [U-Boot] [U-Boot, V3, 5/6] bcm968380gerg: enable watchdog and reboot with watchdog
Tom Rini
- [U-Boot] [U-Boot, V3, 6/6] bcm968580: enable watchdog and reboot with watchdog
Tom Rini
- [U-Boot] [U-Boot, v4, 1/5] defconfigs: dra7xx_hs_evm: Sync HS and non-HS defconfigs
Tom Rini
- [U-Boot] [U-Boot, v4, 2/5] defconfigs: am57xx_hs_evm: Sync HS and non-HS defconfigs
Tom Rini
- [U-Boot] [U-Boot, v4, 3/5] defconfigs: Add config for DRA7xx High Security EVM with USB Boot support
Tom Rini
- [U-Boot] [U-Boot, v4, 4/5] defconfigs: Add config for AM57xx High Security EVM with USB/UART Boot support
Tom Rini
- [U-Boot] [U-Boot, v4, 5/5] doc: ti-secure: Add ULO info for AM57xx/DRA7xx secure devices from TI
Tom Rini
- [U-Boot] [U-Boot, 1/1] test: provide unit test for memory functions
Tom Rini
- [U-Boot] omap3_cairo: remove empty #ifdef/#endif block
Tom Rini
- [U-Boot] [U-Boot, v3] moveconfig: add a second pass for empty #if/#endif blocks
Tom Rini
- [U-Boot] hashtable: fix environment variable corruption
Tom Rini
- [U-Boot] drivers: serial: dm: Enable DM_FLAG_PRE_RELOC in SBSA pl011 uart driver
Tom Rini
- [U-Boot] [U-Boot, 1/7] clk: stm32mp1: no more get ck_usbo_48m in device tree
Tom Rini
- [U-Boot] [U-Boot,2/7] clk: stm32mp1: add IPCC clock
Tom Rini
- [U-Boot] [U-Boot, 3/7] clk: stm32mp1: correct access to RCC_OCENSETR/RCC_OCENCLRR
Tom Rini
- [U-Boot] [U-Boot, 3/7] clk: stm32mp1: correct access to RCC_OCENSETR/RCC_OCENCLRR
Tom Rini
- [U-Boot] [U-Boot, 4/7] clk: stm32mp1: recalculate counter when switching freq
Tom Rini
- [U-Boot] [U-Boot,5/7] clk: stm32mp1: add debug information
Tom Rini
- [U-Boot] [U-Boot,6/7] dts: stm32mp1: clock tree update
Tom Rini
- [U-Boot] [U-Boot, 7/7] clk: stm32mp1: correctly handle Clock Spreading Generator
Tom Rini
- [U-Boot] mmc: omap_hsmmc: Workaround errata regarding SDR104/HS200 tuning failures (i929)
Tom Rini
- [U-Boot] board/BuR/brppt1: drop DM_I2C_COMPAT
Tom Rini
- [U-Boot] initcall: Move to inline function
Tom Rini
- [U-Boot] [U-Boot,1/5] bcm63158: add initial support
Tom Rini
- [U-Boot] [U-Boot,2/5] bcm963158: add initial support
Tom Rini
- [U-Boot] [U-Boot, 3/5] watchdog: bcm6345: allow to use this driver on arm bcm63158
Tom Rini
- [U-Boot] [U-Boot,4/5] dt: bcm63158: add watchdog
Tom Rini
- [U-Boot] [U-Boot, 5/5] bcm963158: enable watchdog and reboot with watchdog
Tom Rini
- [U-Boot] [U-Boot, v3, 1/2] dm: device: fail uclass_find_first_device() if list_empty
Tom Rini
- [U-Boot] [U-Boot, v3, 2/2] cmd: sata: add null pointer check for dev
Tom Rini
- [U-Boot] [U-Boot, 1/3] configs: am65x_evm_r5: Enable GPT support
Tom Rini
- [U-Boot] [U-Boot, 2/3] am65x_evm: Allow bootm to load larger kernels
Tom Rini
- [U-Boot] [U-Boot, 3/3] armv7R: K3: am654: Fix order of debug elements in x509 template
Tom Rini
- [U-Boot] [U-Boot,V2,1/2] bcm968580: rename to bcm968580xref
Tom Rini
- [U-Boot] [U-Boot, V2, 2/2] bcm968580xref: switch to CONFIG_OF_SEPARATE
Tom Rini
- [U-Boot] arm: mach-k3: common: Clean up ATF image startup function
Tom Rini
- [U-Boot] fdt: support booting with dtb in Android image
Tom Rini
- [U-Boot] [PATCH] initcall: Move to inline function
Tom Rini
- [U-Boot] [U-Boot,v2] spl: implement CRC check on U-Boot uImage
Tom Rini
- [U-Boot] [PATCH] initcall: Move to inline function
Tom Rini
- [U-Boot] [PULL] u-boot-sh/master
Tom Rini
- [U-Boot] Please pull u-boot-dm
Tom Rini
- [U-Boot] [PATCH v6 02/16] Makefile: Fix mrproper make target
Tom Rini
- [U-Boot] [U-Boot, v4, 1/1] avb: add support for named persistent values
Tom Rini
- [U-Boot] [ANN] Monthly developer call
Tom Rini
- [U-Boot] Please pull u-boot-marvell/master
Tom Rini
- [U-Boot] Please pull from u-boot-i2c
Tom Rini
- [U-Boot] [PATCH 1/2] spi: ti_qspi: Drop non DM code
Tom Rini
- [U-Boot] [PATCH 2/2] spi: ti_qspi: Convert to spi-mem ops
Tom Rini
- [U-Boot] [RFC] ARM: omap3_logic_somlv: Enable OF_CONTROL in SPL
Tom Rini
- [U-Boot] [RFC] ARM: omap3_logic_somlv: Enable OF_CONTROL in SPL
Tom Rini
- [U-Boot] [PATCH] MTD: mxs_nand: Fix BCH read timeout error on boards requiring ECC
Tom Rini
- [U-Boot] Please pull u-boot-x86
Tom Rini
- [U-Boot] [U-Boot, 1/1] test/py: use default load address for tftp
Tom Rini
- [U-Boot] [PATCH v3 09/13] mmc: sdhci: Make set_ios_post() return int
Tom Rini
- [U-Boot] [PATCH 1/1] test: let use gdbserver for all sandbox targets
Tom Rini
- [U-Boot] [PATCH] hikey: Allow environment to store in eMMC and increase bootdelay
Tom Rini
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
Tom Rini
- [U-Boot] [PATCH] hikey: Allow environment to store in eMMC and increase bootdelay
Tom Rini
- [U-Boot] [PATCH] hikey: Allow environment to store in eMMC and increase bootdelay
Tom Rini
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
Tom Rini
- [U-Boot] [PATCH 2/3] sunxi: Rename Sinovoip BPI M2 Plus to Bananapi M2 Plus H3
Tom Rini
- [U-Boot] [PULL] efi patch queue 2019-02-13
Tom Rini
- [U-Boot] [RESEND PATCH v5 3/7] test: fs: Add filesystem integrity checks
Tom Rini
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
Tom Rini
- [U-Boot] [RFC 1/1] configs: rk3288: SPL file must fit into 32 KiB
Tom Rini
- [U-Boot] [PATCH 1/7] arm: K3: Avoid use of MCU_PSRAM0 before SYSFW is loaded
Tom Rini
- [U-Boot] [PATCH 2/7] firmware: ti_sci: Add support for firewall management
Tom Rini
- [U-Boot] [PATCH 3/7] firmware: ti_sci: Modify auth_boot TI-SCI API to match new version
Tom Rini
- [U-Boot] [PATCH 4/7] arm: mach-k3: Add secure device support
Tom Rini
- [U-Boot] [PATCH 5/7] arm: mach-k3: Add secure device build support
Tom Rini
- [U-Boot] [PATCH 6/7] configs: Add a config for AM65x High Security EVM
Tom Rini
- [U-Boot] [PATCH 7/7] doc: Update info on using K3 secure devices
Tom Rini
- [U-Boot] [ANN] Monthly developer call
Tom Rini
- [U-Boot] [RFC 1/1] configs: rk3288: SPL file must fit into 32 KiB
Tom Rini
- [U-Boot] [PATCH] lib/crc16: use non-C99 loop style
Tom Rini
- [U-Boot] [PATCH] lib/crc16: use non-C99 loop style
Tom Rini
- [U-Boot] PRs, Breakage architecture
Tom Rini
- [U-Boot] [PATCH] efi_loader: Swap roles with Heinrich
Tom Rini
- [U-Boot] [PATCH] rpi: Make Matthias maintainer
Tom Rini
- [U-Boot] Pull request: u-boot-sunxi/master
Tom Rini
- [U-Boot] Pull request: BCM ARM changes
Tom Rini
- [U-Boot] [GIT PULL] Xilinx patches for v2019.04-rc2
Tom Rini
- [U-Boot] [PATCH 2/2] ARM: omap3_logic: Enable SPL booting device tree
Tom Rini
- [U-Boot] [PATCH 1/2] ARM: DTS: omap3-u-boot.dtsi
Tom Rini
- [U-Boot] [PATCH 2/2] ARM: omap3_logic: Enable SPL booting device tree
Tom Rini
- [U-Boot] [PATCH 2/2] ARM: omap3_logic: Enable SPL booting device tree
Tom Rini
- [U-Boot] [PATCH 1/2] omap3_beagle: Update for DM SPL support
Tom Rini
- [U-Boot] [PATCH 2/2] omap3_beagle: Enable DM_SPI
Tom Rini
- [U-Boot] Pull request: u-boot-imx u -boot-imx-201900216
Tom Rini
- [U-Boot] [PATCH v2 1/1] configs: rk3288: Tinker Board SPL file must fit into 32 KiB
Tom Rini
- [U-Boot] [PATCH 5/7] arm: mach-k3: Add secure device build support
Tom Rini
- [U-Boot] [PATCH v2 1/1] configs: rk3288: Tinker Board SPL file must fit into 32 KiB
Tom Rini
- [U-Boot] [PATCH] ARM: omap3: evm: Update DM SPL support
Tom Rini
- [U-Boot] [ANN] Monthly developer call
Tom Rini
- [U-Boot] [PULL] u-boot-sh/master
Tom Rini
- [U-Boot] Please pull u-boot-video
Tom Rini
- [U-Boot] configs: move CONFIG_SPL_TEXT_BASE to Kconfig
Tom Rini
- [U-Boot] February community conf call minutes
Tom Rini
- [U-Boot] [PATCH v2 5/7] k2g: config enable ti phy dp83867 for k2g
Tom Rini
- [U-Boot] [PATCH 1/1] cmd: add exception command
Tom Rini
- [U-Boot] Pull request for EFI subsystem in U-Boot v2019.04-rc2
Tom Rini
- [U-Boot] [U-Boot,v1,1/2] configs: k2g_evm: Enable CONFIG_BLK
Tom Rini
- [U-Boot] [U-Boot, v1, 2/2] configs: Enable CONFIG_BLK in am57xx_evm and am57xx_hs_evm
Tom Rini
- [U-Boot] efi_loader: Swap roles with Heinrich
Tom Rini
- [U-Boot] rpi: Make Matthias maintainer
Tom Rini
- [U-Boot] board/BuR/brppt1: fix ethernet support on brppt1 boards
Tom Rini
- [U-Boot] [ANN] U-Boot v2019.04-rc2 released
Tom Rini
- [U-Boot] [PATCH] configs: dra7xx_evm: Remove ENV_IS_IN_FAT and SPL_ENV_*
Tom Rini
- [U-Boot] [U-Boot, V2, 1/2] davinci: da850evm: Move BSS to SDRAM because SRAM is full
Tom Rini
- [U-Boot] [PATCH 1/1] travis: Exclude omap from the arm926ejs job
Tom Rini
- [U-Boot] [PATCH 1/1] travis: Exclude omap from the arm926ejs job
Tom Rini
- [U-Boot] [PULL] u-boot-socfpga/master
Tom Rini
- [U-Boot] [U-Boot,1/1] tpm: simplify: tpm_set_global_lock()
Tom Rini
- [U-Boot] [U-Boot,1/1] dm: scsi: report correct device number
Tom Rini
- [U-Boot] board/BuR/brxre1: convert do DM
Tom Rini
- [U-Boot] elf: fix cache flushing in 'bootelf -p' command
Tom Rini
- [U-Boot] cmd: date: Do not overwrite arguments
Tom Rini
- [U-Boot] configs: am57xx_evm: define CONFIG_SPL_LOAD_FIT_ADDRESS for SPL-DFU
Tom Rini
- [U-Boot] [U-Boot,v3] spl: implement CRC check on U-Boot uImage
Tom Rini
- [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer
Tom Rini
- [U-Boot] [U-Boot, v3, 2/2] fs: fat: Reduce default max clustersize 64KiB from malloc pool
Tom Rini
- [U-Boot] dtbo: Fix dtbo generation rules
Tom Rini
- [U-Boot] bcm963158: use TARGET_BCM963158 instead of ARCH_BCM63158
Tom Rini
- [U-Boot] [U-Boot, 1/1] test: let use gdbserver for all sandbox targets
Tom Rini
- [U-Boot] hikey: Allow environment to store in eMMC and increase bootdelay
Tom Rini
- [U-Boot] ARM: da850evm: Increase Malloc Size
Tom Rini
- [U-Boot] ARM: am3517_evm: Enable Falcon Mode
Tom Rini
- [U-Boot] ARM: da8xxevm: Add NAND instructions for da850-evm to README
Tom Rini
- [U-Boot] [U-Boot,1/2] ARM: DTS: omap3-u-boot.dtsi
Tom Rini
- [U-Boot] [U-Boot, 2/2] ARM: omap3_logic: Enable SPL booting device tree
Tom Rini
- [U-Boot] cmd/fs: fix build if CMD_BOOTEFI is not set
Tom Rini
- [U-Boot] [U-Boot,1/2] omap3_beagle: Update for DM SPL support
Tom Rini
- [U-Boot] [U-Boot,2/2] omap3_beagle: Enable DM_SPI
Tom Rini
- [U-Boot] ARM: omap3: evm: Update DM SPL support
Tom Rini
- [U-Boot] dm: Fix typo 'Watchdot' -> 'Watchdog'
Tom Rini
- [U-Boot] cmd: pcmcia: Build only if CONFIG_CMD_PCMCIA=y
Tom Rini
- [U-Boot] Please pull u-boot-fsl-qoriq master
Tom Rini
- [U-Boot] Please pull u-boot-x86
Tom Rini
- [U-Boot] Pull request, u-boot-tegra/master
Tom Rini
- [U-Boot] [PATCH v3 6/7] k2g: config enable ti phy dp83867 for k2g
Tom Rini
- [U-Boot] [PATCH v2 1/7] arm: K3: Avoid use of MCU_PSRAM0 before SYSFW is loaded
Tom Rini
- [U-Boot] [PATCH 4/4] configs: ti_omap5_common: Add NAND environment settings
Tom Rini
- [U-Boot] [PATCH] configs: dra7xx_evm: Remove ENV_IS_IN_FAT and SPL_ENV_*
Tom Rini
- [U-Boot] [PATCH] fs: ext4: cache extent data
Tom Rini
- [U-Boot] [PATCH v8 00/15] SiFive FU540 Support
Tom Rini
- [U-Boot] [PATCH v8 00/15] SiFive FU540 Support
Tom Rini
- [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer
Tom Rini
- [U-Boot] [PATCH 2/3] env: Don't check CONFIG_ENV_OFFSET_REDUND for SPL build
Tom Rini
- [U-Boot] [PATCH 3/3] am335x, guardian: Add support for the bosch guardian board
Tom Rini
- [U-Boot] [PATCH] am57xx_evm_defconfig: Enable configs to support QSPI boot
Tom Rini
- [U-Boot] [PATCH] Support boot Android image without address on bootm command
Tom Rini
- [U-Boot] [PATCH 2/3] env: Don't check CONFIG_ENV_OFFSET_REDUND for SPL build
Tom Rini
- [U-Boot] [PATCH 2/3] env: Don't check CONFIG_ENV_OFFSET_REDUND for SPL build
Tom Rini
- [U-Boot] [RFC PATCH 1/1] spi: Kconfig: change dependency order
Tom Rini
- [U-Boot] [PATCH v2 2/3] env: Don't check CONFIG_ENV_OFFSET_REDUND for SPL build
Tom Rini
- [U-Boot] [PATCH v2 3/3] am335x, guardian: Add support for the bosch guardian board
Tom Rini
- [U-Boot] cmd: Kconfig: LED command depends on LED subsystems
Tom Rini
- [U-Boot] preboot: Introduce CONFIG_USE_PREBOOT and migrate CONFIG_PREBOOT
Tom Rini
- [U-Boot] U-Boot pull request for EFI subsystem in v2019.04-rc3
Tom Rini
- [U-Boot] [PATCH v2 6/6] ARM: MediaTek: Add support for MT8516 SoC
Tom Rini
- [U-Boot] ut dm pch sandbox test failures
Tom Rini
- [U-Boot] [PATCH v3 1/1] configs: rk3288: Tinker Board SPL file must fit into 32 KiB
Tom Rini
- [U-Boot] [PATCH v2] configs: dra7xx_evm: Remove ENV_IS_IN_FAT
Tom Rini
- [U-Boot] [PATCH v2 4/4] configs: ti_omap5_common: Add NAND environment settings
Tom Rini
- [U-Boot] Pull request: u-boot-riscv/master
Tom Rini
- [U-Boot] [PATCH v3 1/1] configs: rk3288: Tinker Board SPL file must fit into 32 KiB
Tom Rini
- [U-Boot] Commit "ARM: CPU: arm926ejs: Consolidate cache routines to common file" breaks u-boot on Dreamplug
Tom Rini
- [U-Boot] Pull request: u-boot-sunxi/master
Tom Rini
- [U-Boot] spi: omap3: fix set_wordlen() reading from incorrect address for CHCONF
Tom Rini
- [U-Boot] ARM: cache: Fix incorrect bitwise operation
Tom Rini
- [U-Boot] .gitignore: Ignore regenerated *.dtbo files
Tom Rini
- [U-Boot] arm: pdu001: Fix order of include files
Tom Rini
- [U-Boot] [U-Boot, 1/1] fs: fat: fix link error when building with DEBUG=1
Tom Rini
- [U-Boot] doc: binding: rename directory ram to memory-controller
Tom Rini
- [U-Boot] [U-Boot,1/2] kbuild: make arch-dtbs target PHONY
Tom Rini
- [U-Boot] [U-Boot,2/2] kbuild: fix DTB .cmd source variable
Tom Rini
- [U-Boot] spl: add debug print for early malloc usage
Tom Rini
- [U-Boot] [RFC PATCH 2/3] sunxi: Don't change the rank in dram size detection in A33
Maxime Ripard
- [U-Boot] [RFC PATCH 3/3] sunxi: Fix A33 memory initialization
Maxime Ripard
- [U-Boot] [RFC PATCH 3/3] sunxi: Fix A33 memory initialization
Maxime Ripard
- [U-Boot] [PATCH] spi: omap3: fix set_wordlen() reading from incorrect address for CHCONF
David Rivshin
- [U-Boot] [PATCH] am335x-fb: don't override lcd_get_size()
David Rivshin
- [U-Boot] [PATCH v2 09/13] mmc: sdhci: Make set_ios_post() return int
Rizvi, Mohammad Faiz Abbas
- [U-Boot] [PATCH v4 0/4] spi-flash: switch to "jedec, spi-nor" binding
Peter Robinson
- [U-Boot] v2 Tegra cleanups and Kconfig migrations
Peter Robinson
- [U-Boot] [PATCH 1/4] Kconfig: tegra: Migrate SYS_I2C_TEGRA
Peter Robinson
- [U-Boot] [PATCH 2/4] Kconfig: tegra: Migrate USB_EHCI_TEGRA
Peter Robinson
- [U-Boot] [PATCH 3/4] Kconfig: tegra: Migrate TEGRA_KEYBOARD
Peter Robinson
- [U-Boot] [PATCH 4/4] nyan-big: drop CONFIG_KEYBOARD
Peter Robinson
- [U-Boot] [PATCH 2/4] Kconfig: tegra: Migrate USB_EHCI_TEGRA
Peter Robinson
- [U-Boot] [PATCH 2/4 v3] pci: pci_mvebu: Add DM_PCI support and move CONFIG_PCI_MVEBU to defconfig
Stefan Roese
- [U-Boot] [PATCH] core: ofnode: Add ofnode_pci_get_devfn()
Stefan Roese
- [U-Boot] [PATCH v4] arm64: mvebu: Add basic support for uDPU board
Stefan Roese
- [U-Boot] [PATCH 1/4 v3] pci: Add pci_get_devfn() to extract devfn from the fdt_pci_addr
Stefan Roese
- [U-Boot] [PATCH 2/4 v3] pci: pci_mvebu: Add DM_PCI support and move CONFIG_PCI_MVEBU to defconfig
Stefan Roese
- [U-Boot] [PATCH 3/4 v3] arm: mvebu: armada-xp/37x.dtsi: Sync PCIe DT nodes with Linux v4.20
Stefan Roese
- [U-Boot] [PATCH 4/4 v3] arm: mvebu: armada-xp-theadorable.dts: Enable PCIe DT nodes
Stefan Roese
- [U-Boot] [PATCH v2] video: Armada XP: Move driver to DM_VIDEO
Stefan Roese
- [U-Boot] [PATCH v2] arm: mvebu: theadorable: Enable video / LCD support with the new DM driver
Stefan Roese
- [U-Boot] Please pull u-boot-marvell/master
Stefan Roese
- [U-Boot] [PATCH] Kconfig: fix BUILD_TARGET for ARCH_MVEBU
Stefan Roese
- [U-Boot] [PATCH v2 1/2] Kconfig: Migrate CONFIG_BUILD_TARGET
Stefan Roese
- [U-Boot] [PATCH 2/4 v3] pci: pci_mvebu: Add DM_PCI support and move CONFIG_PCI_MVEBU to defconfig
Stefan Roese
- [U-Boot] [PATCH] pci: pci_mvebu: Add comment about missing of_n_addr_cells() call
Stefan Roese
- [U-Boot] [PATCH] pci: Add comment to mention difference in DEVFN usage in U-Boot vs Linux
Stefan Roese
- [U-Boot] [PATCH 1/3] arm: mvebu: mcbin: dts: fix PCIe reset polarity
Stefan Roese
- [U-Boot] [PATCH 2/3] pcie: designware: mvebu: fix reset release polarity
Stefan Roese
- [U-Boot] [PATCH 3/3] arm: mvebu: cf gt-8k: dts: add PCIe slot reset support
Stefan Roese
- [U-Boot] [PATCH] ARM: mvebu: x530: use MV_DDR_FREQ_SAR
Stefan Roese
- [U-Boot] [PATCH] ARM: mvebu: x530: use MV_DDR_FREQ_SAR
Stefan Roese
- [U-Boot] [PATCH] Kconfig: fix BUILD_TARGET for ARCH_MVEBU
Stefan Roese
- [U-Boot] [PATCH 1/3] arm: mvebu: mcbin: dts: fix PCIe reset polarity
Stefan Roese
- [U-Boot] [PATCH 2/3] pcie: designware: mvebu: fix reset release polarity
Stefan Roese
- [U-Boot] [PATCH 3/3] arm: mvebu: cf gt-8k: dts: add PCIe slot reset support
Stefan Roese
- [U-Boot] Please pull u-boot-marvell/master
Stefan Roese
- [U-Boot] [PATCH] configs/clearfog_gt_8k: add network interface support
Stefan Roese
- [U-Boot] [PATCH 1/2] watchdog: orion_wdt: support SPL usage
Stefan Roese
- [U-Boot] [PATCH 2/2] arm: mvebu: x530: Enable watchdog in SPL and U-Boot
Stefan Roese
- [U-Boot] [PATCH 2/4] arm: mvebu: Add Marvell's integrated CPUs
Stefan Roese
- [U-Boot] [PATCH 4/4] arm: mvebu: Add DB-XC3-24G4XG board
Stefan Roese
- [U-Boot] [PATCH 2/4] arm: mvebu: Add Marvell's integrated CPUs
Stefan Roese
- [U-Boot] [PATCH] MAINTAINERS: Update u-boot-marvell entry
Stefan Roese
- [U-Boot] [PATCH v2 4/5] tools: kwbimage: don't adjust for image_header for Armada MSYS
Stefan Roese
- [U-Boot] [PATCH v4 2/3] watchdog: orion_wdt: take timeout value in ms
Stefan Roese
- [U-Boot] [PATCH v4 3/3] arm: mvebu: x530: Enable watchdog in SPL and U-Boot
Stefan Roese
- [U-Boot] [PATCH 1/1] added missing GigaDevice chips
Stefan Roese
- [U-Boot] [PATCH] mips: mt76xx: linkit: Add mtd command support
Stefan Roese
- [U-Boot] [PATCH] L3 cache : arch : arm : lib : Flush L3 after relocation
Stefan Roese
- [U-Boot] [PATCH v2 4/5] tools: kwbimage: don't adjust for image_header for Armada MSYS
Stefan Roese
- [U-Boot] [PATCH v2 1/5] arm: sync armada-xp dts files from Linux 5.0
Stefan Roese
- [U-Boot] [PATCH v2 2/5] arm: mvebu: Add Marvell's integrated CPUs
Stefan Roese
- [U-Boot] [PATCH v2 3/5] arm: mvebu: NAND clock support for MSYS devices
Stefan Roese
- [U-Boot] [PATCH v2 5/5] arm: mvebu: Add DB-XC3-24G4XG board
Stefan Roese
- [U-Boot] [PATCH v3] tools: kwbimage: don't adjust for image_header for Armada MSYS
Stefan Roese
- [U-Boot] [PATCH v2 3/4] ARM: atmel: at91sam9x5ek: enable spl support
Stefan Roese
- [U-Boot] [PATCH v2 3/4] ARM: atmel: at91sam9x5ek: enable spl support
Stefan Roese
- [U-Boot] [PATCH v2 3/4] ARM: atmel: at91sam9x5ek: enable spl support
Stefan Roese
- [U-Boot] [PATCH v2 3/4] ARM: atmel: at91sam9x5ek: enable spl support
Stefan Roese
- [U-Boot] None
Rosysong
- [U-Boot] [PATCH] hikey: Allow environment to store in eMMC and increase bootdelay
Manivannan Sadhasivam
- [U-Boot] [PATCH 1/3] board: engicam: Add watchdog support on Engicam
Shyam Saini
- [U-Boot] [PATCH 2/3] configs: imx6qdl_icore_mmc: Enable watchdog and bootcounter
Shyam Saini
- [U-Boot] [PATCH 3/3] include: configs: imx6-engicam: Add recovery boot option
Shyam Saini
- [U-Boot] [PATCH 1/6] pico-imx6ul: Import dts files from kernel
Otavio Salvador
- [U-Boot] [PATCH 3/6] pico-imx6ul: Convert to DM MMC
Otavio Salvador
- [U-Boot] [PATCH 2/6] pico-imx6ul: Select CONFIG_OF_CONTROL
Otavio Salvador
- [U-Boot] [PATCH 6/6] pico-imx6ul: README: Adjust the binary name after DM conversion
Otavio Salvador
- [U-Boot] [PATCH 5/6] pico-imx6ul: Convert to DM_PMIC
Otavio Salvador
- [U-Boot] [PATCH 4/6] pico-imx6ul: Convert to CONFIG_DM_GPIO
Otavio Salvador
- [U-Boot] [PATCH] arm: dts: am33xx: add u-boot, dm-spl to ocp bus
Hannes Schmelzer
- [U-Boot] [PATCH v2] arm: dts: am33xx: introduce 'am33xx-u-boot.dtsi'
Hannes Schmelzer
- [U-Boot] [PATCH] board/BuR/brxre1: convert do DM
Hannes Schmelzer
- [U-Boot] [PATCH v2] arm: dts: am33xx: introduce 'am33xx-u-boot.dtsi'
Hannes Schmelzer
- [U-Boot] [PATCH] zynq: fix I2C in SPL
Hannes Schmelzer
- [U-Boot] Antwort: Re: [PATCH] zynq: fix I2C in SPL
Hannes Schmelzer
- [U-Boot] [PATCH v2] ARM: zynq: Add missing i2c get_rate for fixing i2c SPL
Hannes Schmelzer
- [U-Boot] Antwort: Re: [PATCH] zynq: fix I2C in SPL
Hannes Schmelzer
- [U-Boot] [PATCH] ARM: dts: i.MX6QDL: add missing spba-bus to aips-bus
Hannes Schmelzer
- [U-Boot] [PATCH] drivers/net/fec: phy_init: remove redundant logic
Hannes Schmelzer
- [U-Boot] [PATCH] board/BuR/brppt1: fix ethernet support on brppt1 boards
Hannes Schmelzer
- [U-Boot] [PATCH] usb: Select USB_MUSB_DSPS with USB_MUSB_TI
Hannes Schmelzer
- [U-Boot] [PATCH] arm: dts: imx6qdl-u-boot: Enable spba-bus at 2000000 simple bus
Hannes Schmelzer
- [U-Boot] [PATCH] am335x-fb: don't override lcd_get_size()
Hannes Schmelzer
- [U-Boot] [PATCH v2 0/7] Align U-Boot I2C DM bus ID handling with Linux
Heiko Schocher
- [U-Boot] [PATCH] i2c: cdns: Covert to livetree function
Heiko Schocher
- [U-Boot] [PATCH 1/2] i2c: ihs: Get rid of fpgamap
Heiko Schocher
- [U-Boot] [PATCH 2/2] i2c: ihs: Improve error handling
Heiko Schocher
- [U-Boot] [PATCH v2 1/7] dm: core: Add of_alias_get_highest_id()
Heiko Schocher
- [U-Boot] [PATCH v2 2/7] fdt: Introduce fdtdec_get_alias_highest_id()
Heiko Schocher
- [U-Boot] [PATCH v2 3/7] dm: core: Introduce dev_read_alias_highest_id()
Heiko Schocher
- [U-Boot] [PATCH v2 4/7] dm: core: Add tests for dev_read_alias_highest_id()
Heiko Schocher
- [U-Boot] [PATCH v2 5/7] i2c: dm: Record maximum id of devices before probing devices
Heiko Schocher
- [U-Boot] [PATCH v2 6/7] i2c: Fill req_seq in i2c_post_bind()
Heiko Schocher
- [U-Boot] [PATCH v2 7/7] i2c: mux: Generate longer i2c mux name
Heiko Schocher
- [U-Boot] [PATCH v2 1/7] ARM: zynq: Convert Syzygy to DM_I2C
Heiko Schocher
- [U-Boot] [PATCH v2 2/7] ARM: zynq: Convert dlc20 and zc70x board to DM_I2C
Heiko Schocher
- [U-Boot] [PATCH v2 3/7] ARM: zynq: Remove addresses for i2c controllers
Heiko Schocher
- [U-Boot] [PATCH v2 4/7] arm64: zynqmp: Switch all platfroms to DM_I2C
Heiko Schocher
- [U-Boot] [PATCH v2 5/7] arm64: zynqmp: Remove addresses for i2c controllers
Heiko Schocher
- [U-Boot] [PATCH v2 6/7] i2c: Remove ancient zynq_i2c driver
Heiko Schocher
- [U-Boot] [PATCH v2 7/7] xilinx: common: Remove !DM_i2C code for reading mac from eeprom
Heiko Schocher
- [U-Boot] [PATCH] mtd: add spi flash id s25f064l
Heiko Schocher
- [U-Boot] [PATCH v2 0/7] Align U-Boot I2C DM bus ID handling with Linux
Heiko Schocher
- [U-Boot] [PATCH v2] mtd: add spi flash id s25fl064l
Heiko Schocher
- [U-Boot] [PATCH v2 0/7] Align U-Boot I2C DM bus ID handling with Linux
Heiko Schocher
- [U-Boot] [PATCH v2 0/7] Align U-Boot I2C DM bus ID handling with Linux
Heiko Schocher
- [U-Boot] [PATCH v2 1/7] dm: core: Add of_alias_get_highest_id()
Heiko Schocher
- [U-Boot] [PATCH v2 2/7] fdt: Introduce fdtdec_get_alias_highest_id()
Heiko Schocher
- [U-Boot] [PATCH v2 3/7] dm: core: Introduce dev_read_alias_highest_id()
Heiko Schocher
- [U-Boot] [PATCH v2 4/7] dm: core: Add tests for dev_read_alias_highest_id()
Heiko Schocher
- [U-Boot] [PATCH v2 5/7] i2c: dm: Record maximum id of devices before probing devices
Heiko Schocher
- [U-Boot] [PATCH v2 6/7] i2c: Fill req_seq in i2c_post_bind()
Heiko Schocher
- [U-Boot] [PATCH v2 7/7] i2c: mux: Generate longer i2c mux name
Heiko Schocher
- [U-Boot] Please pull from u-boot-i2c
Heiko Schocher
- [U-Boot] [PATCH v2 06/34] i2c: designware: Add error checking on init
Heiko Schocher
- [U-Boot] [PATCH v2] ARM: zynq: Add missing i2c get_rate for fixing i2c SPL
Heiko Schocher
- [U-Boot] [PATCH 1/2] mtd: ubi debug: Remove the pid print from ubi_assert
Heiko Schocher
- [U-Boot] [PATCH 1/2] mtd: ubi debug: Remove the pid print from ubi_assert
Heiko Schocher
- [U-Boot] February community conf call minutes
Heiko Schocher
- [U-Boot] [PATCH 1/1] efi_loader: efi_dp_split_file_path() error handling
Heinrich Schuchardt
- [U-Boot] [PATCH 2/2] efi_loader: set the dhcp ack received flag
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: comments for efi_file_from_path()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] tpm: simplify: tpm_set_global_lock()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_selftest: LoadImage from file device path
Heinrich Schuchardt
- [U-Boot] [PATCH 1/3] x86: Change 4-level page table base address to low memory
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] dm: scsi: report correct device number
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] efi_selftest: LoadImage from file device path
Heinrich Schuchardt
- [U-Boot] [RFC v2 00/15] dm, efi: integrate efi objects into DM
Heinrich Schuchardt
- [U-Boot] [RFC v2 01/15] efi_loader: efi objects and protocols as DM devices
Heinrich Schuchardt
- [U-Boot] [RFC v2 02/15] efi_loader: boottime: convert efi_loaded_image_obj to DM
Heinrich Schuchardt
- [U-Boot] [PATCH v2 0/4] efi_loader: rework loading and starting of images
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/4] efi_loader: LoadImage: always allocate new pages
Heinrich Schuchardt
- [U-Boot] [PATCH v2 2/4] efi_loader: set entry point in efi_load_pe()
Heinrich Schuchardt
- [U-Boot] [PATCH v2 3/4] efi_loader: use efi_start_image() for bootefi
Heinrich Schuchardt
- [U-Boot] [PATCH v2 4/4] efi_loader: clean up bootefi_test_prepare()
Heinrich Schuchardt
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
Heinrich Schuchardt
- [U-Boot] [U-Boot, v3, 1/5] efi_loader: Initial HII database protocols
Heinrich Schuchardt
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: fix EFI_FILE_PROTOCOL.GetInfo()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] lib: vsprintf: avoid overflow printing UTF16 strings
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: fix EFI entry counting
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] lib: vsprintf: avoid overflow printing UTF16 strings
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] test: call hexdump tests via `ut lib`
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: fix EFI entry counting
Heinrich Schuchardt
- [U-Boot] [PATCH] test: call lmb tests vi 'ut lib'
Heinrich Schuchardt
- [U-Boot] [RFC v2 02/15] efi_loader: boottime: convert efi_loaded_image_obj to DM
Heinrich Schuchardt
- [U-Boot] [RFC v2 00/15] dm, efi: integrate efi objects into DM
Heinrich Schuchardt
- [U-Boot] [RFC] efi_loader: EFI variables
Heinrich Schuchardt
- [U-Boot] [PATCH v3 1/1] efi_selftest: LoadImage from file device path
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_selftest: fix memory allocation in HII tests
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_selftest: do not use efi_free_pool()
Heinrich Schuchardt
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
Heinrich Schuchardt
- [U-Boot] [RFC 1/1] configs: rk3288: SPL file must fit into 32 KiB
Heinrich Schuchardt
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
Heinrich Schuchardt
- [U-Boot] [RFC 1/1] configs: rk3288: SPL file must fit into 32 KiB
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] configs: rk3288: Tinker Board SPL file must fit into 32 KiB
Heinrich Schuchardt
- [U-Boot] [PATCH v3 1/1] configs: rk3288: Tinker Board SPL file must fit into 32 KiB
Heinrich Schuchardt
- [U-Boot] [PATCH] efi_loader: Swap roles with Heinrich
Heinrich Schuchardt
- [U-Boot] [PATCH 0/2] lib/vsprintf: print '?' for illegal Unicode sequence
Heinrich Schuchardt
- [U-Boot] [PATCH 1/2] lib/vsprintf: print '?' for illegal Unicode sequence
Heinrich Schuchardt
- [U-Boot] [PATCH 2/2] test: adjust names of Unicode test functions
Heinrich Schuchardt
- [U-Boot] [PATCH 1/2] cmd: bootefi: move bootefi_test_prepare() forward
Heinrich Schuchardt
- [U-Boot] [PATCH 2/2] cmd: bootefi: rework do_bootefi()
Heinrich Schuchardt
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: documentation of image loader
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: do not miss last relocation block
Heinrich Schuchardt
- [U-Boot] [RFC 1/1] efi_loader: in situ relocation
Heinrich Schuchardt
- [U-Boot] [RFC 1/1] efi_loader: in situ relocation
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] configs: rk3288: Tinker Board SPL file must fit into 32 KiB
Heinrich Schuchardt
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
Heinrich Schuchardt
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
Heinrich Schuchardt
- [U-Boot] Pull request for EFI subsystem in U-Boot v2019.04-rc2
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] cmd: add exception command
Heinrich Schuchardt
- [U-Boot] [PATCH v6.2] cmd: env: add "-e" option for handling UEFI variables
Heinrich Schuchardt
- [U-Boot] [PATCH v6 7/7] cmd: efidebug: add memmap command
Heinrich Schuchardt
- [U-Boot] [PATCH v6 2/7] cmd: add efidebug command
Heinrich Schuchardt
- [U-Boot] [PATCH v6 3/7] cmd: efidebug: add devices command
Heinrich Schuchardt
- [U-Boot] [PATCH v6 4/7] cmd: efidebug: add drivers command
Heinrich Schuchardt
- [U-Boot] [PATCH v6 6/7] cmd: efidebug: add images command
Heinrich Schuchardt
- [U-Boot] [PATCH v6 3/7] cmd: efidebug: add devices command
Heinrich Schuchardt
- [U-Boot] [PATCH v6 2/7] cmd: add efidebug command
Heinrich Schuchardt
- [U-Boot] [PATCH v6 3/7] cmd: efidebug: add devices command
Heinrich Schuchardt
- [U-Boot] [PATCH v6 7/7] cmd: efidebug: add memmap command
Heinrich Schuchardt
- [U-Boot] [RFC 1/1] efi_loader: in situ relocation
Heinrich Schuchardt
- [U-Boot] [RFC 1/1] efi_loader: in situ relocation
Heinrich Schuchardt
- [U-Boot] [PATCH v7 2/7] cmd: add efidebug command
Heinrich Schuchardt
- [U-Boot] [PATCH v7 3/7] cmd: efidebug: add devices command
Heinrich Schuchardt
- [U-Boot] [PATCH v7 4/7] cmd: efidebug: add drivers command
Heinrich Schuchardt
- [U-Boot] [PATCH v7 5/7] cmd: efidebug: add dh command
Heinrich Schuchardt
- [U-Boot] [PATCH v7 7/7] cmd: efidebug: add memmap command
Heinrich Schuchardt
- [U-Boot] [PATCH v7 1/7] cmd: env: add "-e" option for handling UEFI variables
Heinrich Schuchardt
- [U-Boot] [PATCH v7 1/7] cmd: env: add "-e" option for handling UEFI variables
Heinrich Schuchardt
- [U-Boot] [PATCH v7 2/7] cmd: add efidebug command
Heinrich Schuchardt
- [U-Boot] [PATCH v7 4/7] cmd: efidebug: add drivers command
Heinrich Schuchardt
- [U-Boot] [PATCH v8 3/8] cmd: add efidebug command
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: do not add \ in efi_fs_from_name()
Heinrich Schuchardt
- [U-Boot] [PATCH v8 3/8] cmd: add efidebug command
Heinrich Schuchardt
- [U-Boot] [PATCH v8 4/8] cmd: efidebug: add devices command
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: do not add \ in efi_fs_from_name()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: error message if BootOrder not defined
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: fix entry count in bootmgr
Heinrich Schuchardt
- [U-Boot] FEC and EFI Simple Network
Heinrich Schuchardt
- [U-Boot] [BUG] cb8af8af5ba0 "fs: fat: support write with non-zero offset" leads to link error
Heinrich Schuchardt
- [U-Boot] U-Boot pull request for EFI subsystem in v2019.04-rc3
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] fs: fat: fix link error when building with DEBUG=1
Heinrich Schuchardt
- [U-Boot] [PATCH] efi_loader: Fix serial console size detection
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/5] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior
Heinrich Schuchardt
- [U-Boot] [PATCH v2 5/5] cmd: run: add "-e" option to run an EFI application
Heinrich Schuchardt
- [U-Boot] [PATCH v2 4/5] cmd: bootefi: run an EFI application of a specific load option
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/5] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior
Heinrich Schuchardt
- [U-Boot] [PATCH v2 5/5] cmd: run: add "-e" option to run an EFI application
Heinrich Schuchardt
- [U-Boot] [PATCH v2 4/5] cmd: bootefi: run an EFI application of a specific load option
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/5] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior
Heinrich Schuchardt
- [U-Boot] [PATCH v2 5/5] cmd: run: add "-e" option to run an EFI application
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] configs: tinker-rk3288 disable CONFIG_SPL_I2C_SUPPORT
Heinrich Schuchardt
- [U-Boot] [PATCH] efi_loader: Fix serial console size detection
Heinrich Schuchardt
- [U-Boot] [PATCH v2 4/5] cmd: bootefi: run an EFI application of a specific load option
Heinrich Schuchardt
- [U-Boot] [PATCH v2 4/5] cmd: bootefi: run an EFI application of a specific load option
Heinrich Schuchardt
- [U-Boot] [PATCH v2 5/5] cmd: run: add "-e" option to run an EFI application
Heinrich Schuchardt
- [U-Boot] [PATCH v2 5/5] cmd: run: add "-e" option to run an EFI application
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] cmd: set CONFIG_SYS_HELP_CMD_WIDTH = 10
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: error handling for `efidebug boot add`
Heinrich Schuchardt
- [U-Boot] [PATCH v2 5/5] cmd: run: add "-e" option to run an EFI application
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: HII protocols: fix new_package_list()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: HII protocols: informative error message
Heinrich Schuchardt
- [U-Boot] [RESEND PATCH 2/2] ARM: qemu-arm: enable USB boot in distro boot with UEFI
Heinrich Schuchardt
- [U-Boot] Porting to the HTG-Z920
Patrick Schuetterle
- [U-Boot] [U-BOOT] fs: ext4: Problem with ext4load and sparse files
Gero Schumacher
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Andreas Schwab
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Andreas Schwab
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Andreas Schwab
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Andreas Schwab
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Andreas Schwab
- [U-Boot] [PATCH v2 11/11] riscv: Add SiFive FU540 board support
Andreas Schwab
- [U-Boot] [PATCH v7 00/15] SiFive FU540 Support
Andreas Schwab
- [U-Boot] [PATCH v7 00/15] SiFive FU540 Support
Andreas Schwab
- [U-Boot] [PATCH v7 00/15] SiFive FU540 Support
Andreas Schwab
- [U-Boot] [PATCH v7 00/15] SiFive FU540 Support
Andreas Schwab
- [U-Boot] [PATCH v7 00/15] SiFive FU540 Support
Andreas Schwab
- [U-Boot] [PATCH v7 00/15] SiFive FU540 Support
Andreas Schwab
- [U-Boot] [PATCH] MSCC: Jaguar2 enable debug uart
Daniel Schwierzeck
- [U-Boot] [PATCH] MSCC: Fix Jaguar2 board detection.
Daniel Schwierzeck
- [U-Boot] [PATCH] mips: mt76xx: Use correct timer frequency
Daniel Schwierzeck
- [U-Boot] [PATCH v3 0/8] Add network support for Luton SoCs
Daniel Schwierzeck
- [U-Boot] [PULL] u-boot-mips
Daniel Schwierzeck
- [U-Boot] [PATCH 1/3] drivers: fix typo for pinctrl qca953x
Daniel Schwierzeck
- [U-Boot] [PATCH 2/3] drivers: add ethernet support for qca953x in ag7xxx driver
Daniel Schwierzeck
- [U-Boot] [PATCH 3/3] mips: add ethernet support for qca953x referenced boards
Daniel Schwierzeck
- [U-Boot] [PATCH] mips: mt76xx: linkit: Add mtd command support
Daniel Schwierzeck
- [U-Boot] [PATCH 2/3] mips: add initial support for qca956x referenced board
Daniel Schwierzeck
- [U-Boot] [PATCH 3/3] mips: fix erros on registers macros of pll-ddr-config1-nfrac for QCA956X
Daniel Schwierzeck
- [U-Boot] [PATCH v1] x86: tangier: Add initial ACPI support for PMIC device
Andy Shevchenko
- [U-Boot] [PATCH v1 1/2] x86: edison: Use proper number of serial interface
Andy Shevchenko
- [U-Boot] [PATCH v1 2/2] x86: edison: Add the rest of UARTs present on board
Andy Shevchenko
- [U-Boot] [PATCH v1 1/2] x86: acpi: Add DMA descriptors for SPI5 on Intel Tangier
Andy Shevchenko
- [U-Boot] [PATCH v1 2/2] x86: acpi: Add DMA descriptors for I2C1 on Intel Tangier
Andy Shevchenko
- [U-Boot] [PATCH v2 1/2] x86: edison: Use proper number of serial interface
Andy Shevchenko
- [U-Boot] [PATCH v2 2/2] x86: edison: Add the rest of UARTs present on board
Andy Shevchenko
- [U-Boot] [PATCH v2 2/2] x86: edison: Add the rest of UARTs present on board
Andy Shevchenko
- [U-Boot] [PATCH v2 2/2] x86: edison: Add the rest of UARTs present on board
Andy Shevchenko
- [U-Boot] [PATCH v1] x86: acpi: Not every platform has serial console a first device
Andy Shevchenko
- [U-Boot] [PATCH v1] x86: acpi: Not every platform has serial console a first device
Andy Shevchenko
- [U-Boot] [PATCH v2] x86: acpi: Not every platform has serial console a first device
Andy Shevchenko
- [U-Boot] [PATCH 1/3] arm: mvebu: mcbin: dts: fix PCIe reset polarity
Baruch Siach
- [U-Boot] [PATCH 2/3] pcie: designware: mvebu: fix reset release polarity
Baruch Siach
- [U-Boot] [PATCH 3/3] arm: mvebu: cf gt-8k: dts: add PCIe slot reset support
Baruch Siach
- [U-Boot] [PATCH] MAINTAINERS: Change fsl-qoriq, mpc85xx, mpc86xx maintainers
Baruch Siach
- [U-Boot] [PATCH] Kconfig: fix BUILD_TARGET for ARCH_MVEBU
Baruch Siach
- [U-Boot] [PATCH] configs/clearfog_gt_8k: add network interface support
Baruch Siach
- [U-Boot] mx6cuboxi: Detecting wrong .dtb (v2019.01)
Baruch Siach
- [U-Boot] mx6cuboxi: Detecting wrong .dtb (v2019.01)
Baruch Siach
- [U-Boot] [PATCH 1/2] imx8mq_evk/README: fix DDR training firmware path
Baruch Siach
- [U-Boot] [PATCH 2/2] imx8mq_evk/README: add missing firmware extract step
Baruch Siach
- [U-Boot] [PATCH 1/2] tools/imx8m_image.sh: remove bashism
Baruch Siach
- [U-Boot] [PATCH 2/2] imx8mq_evk/README: add missing firmware extract step
Baruch Siach
- [U-Boot] Marvell DDR training custom ODT configuration
Baruch Siach
- [U-Boot] [PATCH v2 1/2] imx8mq_evk/README: add missing firmware extract step
Baruch Siach
- [U-Boot] [PATCH v2 2/2] imx8mq_evk/README: fix DDR training firmware path
Baruch Siach
- [U-Boot] [PATCH 3/4] i2c: dm: Record maximum id of devices before probing devices
Michal Simek
- [U-Boot] [PATCH v2 0/7] Align U-Boot I2C DM bus ID handling with Linux
Michal Simek
- [U-Boot] [RFC PATCH] dm: device: Do not probe parents which are probed already
Michal Simek
- [U-Boot] [PATCH v2 0/7] Align U-Boot I2C DM bus ID handling with Linux
Michal Simek
- [U-Boot] [PATCH] rockchip: Remove rejected files with .rej suffix
Michal Simek
- [U-Boot] [PATCH 0/6] arm64: versal: Misc patches
Michal Simek
- [U-Boot] [PATCH 1/6] arm64: versal: Disable showing information about console
Michal Simek
- [U-Boot] [PATCH 2/6] arm64: versal: Define distro boot commnads for qspi ospi and mmc
Michal Simek
- [U-Boot] [PATCH 3/6] arm64: versal: Define board_late_init for versal
Michal Simek
- [U-Boot] [PATCH 4/6] arm64: versal: Remove one level of indentation in board_early_init_r()
Michal Simek
- [U-Boot] [PATCH 5/6] arm64: versal: Move IOU_SWITCH_DIVISOR0 to Kconfig
Michal Simek
- [U-Boot] [PATCH 6/6] arm64: versal: Add mini configuration for Versal
Michal Simek
- [U-Boot] [PATCH v2 0/7] arm/arm64: i2c platform cleanup
Michal Simek
- [U-Boot] [PATCH v2 1/7] ARM: zynq: Convert Syzygy to DM_I2C
Michal Simek
- [U-Boot] [PATCH v2 2/7] ARM: zynq: Convert dlc20 and zc70x board to DM_I2C
Michal Simek
- [U-Boot] [PATCH v2 3/7] ARM: zynq: Remove addresses for i2c controllers
Michal Simek
- [U-Boot] [PATCH v2 4/7] arm64: zynqmp: Switch all platfroms to DM_I2C
Michal Simek
- [U-Boot] [PATCH v2 5/7] arm64: zynqmp: Remove addresses for i2c controllers
Michal Simek
- [U-Boot] [PATCH v2 6/7] i2c: Remove ancient zynq_i2c driver
Michal Simek
- [U-Boot] [PATCH v2 7/7] xilinx: common: Remove !DM_i2C code for reading mac from eeprom
Michal Simek
- [U-Boot] [PATCH v2 0/7] Align U-Boot I2C DM bus ID handling with Linux
Michal Simek
- [U-Boot] [PATCH v2 0/7] Align U-Boot I2C DM bus ID handling with Linux
Michal Simek
- [U-Boot] [PATCH v2 0/7] Align U-Boot I2C DM bus ID handling with Linux
Michal Simek
- [U-Boot] [PATCH v2 0/7] Align U-Boot I2C DM bus ID handling with Linux
Michal Simek
- [U-Boot] [PATCH v2 0/7] Align U-Boot I2C DM bus ID handling with Linux
Michal Simek
- [U-Boot] [PATCH] dtbo: Fix dtbo generation rules
Michal Simek
- [U-Boot] [PATCH] arm: Leave smccc calls in .text when efi_loader=n
Michal Simek
- [U-Boot] [PATCH 1/3] arm64: zynqmp: Fix logic around CONFIG_ZYNQ_SDHCI
Michal Simek
- [U-Boot] [PATCH 2/3] arm64: zynqmp: Remove SPD related configurations
Michal Simek
- [U-Boot] [PATCH 3/3] arm64: zynqmp: Remove board config files
Michal Simek
- [U-Boot] [PATCH 0/9] xilinx: dts: Update various DT files
Michal Simek
- [U-Boot] [PATCH 1/9] ARM: dts: Use mmc@ instead sdhci@
Michal Simek
- [U-Boot] [PATCH 2/9] ARM: dts: zynq: Set correct manufacturer for ZedBoard and MicroZed boards
Michal Simek
- [U-Boot] [PATCH 3/9] ARM: dts: zynq: correct and improve the model property of dt files
Michal Simek
- [U-Boot] [PATCH 4/9] arm64: zynqmp: Add reset-on-timeout for all boards and modify default timeout value
Michal Simek
- [U-Boot] [PATCH 5/9] xilinx: dts: Remove additional empty lines
Michal Simek
- [U-Boot] [PATCH 6/9] arm64: dts: Fix various entry-method properties to reflect documentation
Michal Simek
- [U-Boot] [PATCH 7/9] arm64: zynqmp: Remove autodetected devices without description
Michal Simek
- [U-Boot] [PATCH 8/9] arm64: zynqmp: Fix i2c boot warning
Michal Simek
- [U-Boot] [PATCH 9/9] arm64: zynqmp: Change the spi-rx-bus-width property to x1
Michal Simek
- [U-Boot] [PATCH] zynq: fix I2C in SPL
Michal Simek
- [U-Boot] [PATCH] arm64: zynqmp: Create fdtfile from compatible string
Michal Simek
- [U-Boot] Antwort: Re: [PATCH] zynq: fix I2C in SPL
Michal Simek
- [U-Boot] [PATCH] arm64: zynqmp: Create fdtfile from compatible string
Michal Simek
- [U-Boot] [PATCH] arm64: zynqmp: Create fdtfile from compatible string
Michal Simek
- [U-Boot] [PATCH v2] arm64: zynqmp: Create fdtfile from compatible string
Michal Simek
- [U-Boot] [GIT PULL] Xilinx patches for v2019.04-rc2
Michal Simek
- [U-Boot] [PATCH] dtbo: Fix dtbo generation rules
Michal Simek
- [U-Boot] [PATCH] fpga: Add support for getting external data address and length
Michal Simek
- [U-Boot] [PATCH] fpga: Replace char * with const char * for filename
Michal Simek
- [U-Boot] [PATCH] test: py: Extend fpga test with fit image with external data
Michal Simek
- [U-Boot] [PATCH] fpga: Replace char * with const char * for filename
Michal Simek
- [U-Boot] [PATCH] .gitignore: Ignore regenerated *.dtbo files
Michal Simek
- [U-Boot] [PATCH] arm64: zynqmp: Disable WDT for zcu100
Michal Simek
- [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer
Michal Simek
- [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer
Michal Simek
- [U-Boot] [PATCH] spl: fit: Add support for applying DT overlay
Michal Simek
- [U-Boot] [PATCH] arm64: zynqmp: Add debug message about clearing BSS
Michal Simek
- [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer
Michal Simek
- [U-Boot] [PATCH] dm: Also remove interrupts property from SPL DT
Michal Simek
- [U-Boot] [PATCH] arm64: zynqmp: Remove eeprom setting
Michal Simek
- [U-Boot] [PATCH] net: phy: Fix return value check phy_probe
Michal Simek
- [U-Boot] [PATCH] net: phy: Reloc next and prev pointers inside phy_drivers
Michal Simek
- [U-Boot] [PATCH v9 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Michal Simek
- [U-Boot] [PATCH v9 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
Michal Simek
- [U-Boot] [PATCH v9 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
Michal Simek
- [U-Boot] [PATCH v9 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Michal Simek
- [U-Boot] [PATCH v9 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Michal Simek
- [U-Boot] [PATCH v9 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
Michal Simek
- [U-Boot] [PATCH v9 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Michal Simek
- [U-Boot] [PATCH v9 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
Michal Simek
- [U-Boot] [PATCH v9 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Michal Simek
- [U-Boot] [PATCH v3 01/60] mpc83xx: Introduce ARCH_MPC830*
Mario Six
- [U-Boot] [PATCH 1/3] drivers: fix typo for pinctrl qca953x
Rosy Song
- [U-Boot] [PATCH 2/3] drivers: add ethernet support for qca953x in ag7xxx driver
Rosy Song
- [U-Boot] [PATCH 3/3] mips: add ethernet support for qca953x referenced boards
Rosy Song
- [U-Boot] [PATCH 1/3] drivers: ag7xxx: add support for qca956x-s17
Rosy Song
- [U-Boot] [PATCH 2/3] mips: add initial support for qca956x referenced board
Rosy Song
- [U-Boot] [PATCH 3/3] mips: fix erros on registers macros of pll-ddr-config1-nfrac for QCA956X
Rosy Song
- [U-Boot] imx8mq-evk: Outbound network packets lost
Chris Spencer
- [U-Boot] imx8mq-evk: Outbound network packets lost
Chris Spencer
- [U-Boot] [PATCH] imx8mq_evk_defconfig: Enable pinctrl driver
Chris Spencer
- [U-Boot] [PATCH v2] imx8mq_evk_defconfig: Enable pinctrl driver
Chris Spencer
- [U-Boot] i.MX8MQ: u-boot-spl-ddr.bin not found
Chris Spencer
- [U-Boot] [PATCH v2 3/7] net: netcp: add support for phy with rgmii ids
Grygorii Strashko
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
Heiko Stübner
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
Heiko Stübner
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
Heiko Stübner
- [U-Boot] [PATCH] configs: fsl: move DDR specific defines to Kconfig
York Sun
- [U-Boot] [PATCH] MAINTAINERS: Change fsl-qoriq, mpc85xx, mpc86xx maintainers
York Sun
- [U-Boot] [PATCH] MAINTAINERS: Change fsl-qoriq, mpc85xx, mpc86xx maintainers
York Sun
- [U-Boot] [PATCH] MAINTAINERS: Change fsl-qoriq, mpc85xx, mpc86xx maintainers
York Sun
- [U-Boot] [PATCH v2] MAINTAINERS: Change fsl-qoriq, mpc85xx, mpc86xx maintainers
York Sun
- [U-Boot] [PATCH v6.2] cmd: env: add "-e" option for handling UEFI variables
AKASHI Takahiro
- [U-Boot] [RFC 2/3] efi_loader: associate BLK/PARTITION device to efi_disk
AKASHI Takahiro
- [U-Boot] [RFC 2/3] efi_loader: associate BLK/PARTITION device to efi_disk
AKASHI Takahiro
- [U-Boot] [RFC 2/3] efi_loader: associate BLK/PARTITION device to efi_disk
AKASHI Takahiro
- [U-Boot] [RFC v2 00/15] dm, efi: integrate efi objects into DM
AKASHI Takahiro
- [U-Boot] [RFC v2 01/15] efi_loader: efi objects and protocols as DM devices
AKASHI Takahiro
- [U-Boot] [RFC v2 02/15] efi_loader: boottime: convert efi_loaded_image_obj to DM
AKASHI Takahiro
- [U-Boot] [RFC v2 03/15] efi_loader: image_loader: aligned with DM
AKASHI Takahiro
- [U-Boot] [RFC v2 04/15] efi_driver: rename UCLASS_EFI to UCLASS_EFI_DRIVER
AKASHI Takahiro
- [U-Boot] [RFC v2 05/15] efi_loader: convert efi_root_node to DM
AKASHI Takahiro
- [U-Boot] [RFC v2 06/15] efi_loader: device path: convert efi_device_path to DM
AKASHI Takahiro
- [U-Boot] [RFC v2 07/15] efi_loader: unicode_collation: converted to DM
AKASHI Takahiro
- [U-Boot] [RFC v2 08/15] efi_loader: console: convert efi console input/output to DM
AKASHI Takahiro
- [U-Boot] [RFC v2 09/15] efi_loader: net: convert efi_net_obj to DM
AKASHI Takahiro
- [U-Boot] [RFC v2 10/15] efi_loader: gop: convert efi_gop_obj to DM
AKASHI Takahiro
- [U-Boot] [RFC v2 11/15] dm: blk: add UCLASS_PARTITION
AKASHI Takahiro
- [U-Boot] [RFC v2 12/15] efi_loader: disk: convert efi_disk_obj to DM
AKASHI Takahiro
- [U-Boot] [RFC v2 13/15] drivers: align block device drivers with DM-efi integration
AKASHI Takahiro
- [U-Boot] [RFC v2 14/15] efi_driver: converted to DM
AKASHI Takahiro
- [U-Boot] [RFC v2 15/15] cmd: efidebug: aligned with DM-efi integration
AKASHI Takahiro
- [U-Boot] [U-Boot, v3, 1/5] efi_loader: Initial HII database protocols
AKASHI Takahiro
- [U-Boot] [RFC v2 01/15] efi_loader: efi objects and protocols as DM devices
AKASHI Takahiro
- [U-Boot] [RFC v2 02/15] efi_loader: boottime: convert efi_loaded_image_obj to DM
AKASHI Takahiro
- [U-Boot] [RFC v2 00/15] dm, efi: integrate efi objects into DM
AKASHI Takahiro
- [U-Boot] [RFC v2 02/15] efi_loader: boottime: convert efi_loaded_image_obj to DM
AKASHI Takahiro
- [U-Boot] [RFC v2 00/15] dm, efi: integrate efi objects into DM
AKASHI Takahiro
- [U-Boot] [RFC v2 00/15] dm, efi: integrate efi objects into DM
AKASHI Takahiro
- [U-Boot] [PATCH 0/2] efi_loader: rework loading (continued)
AKASHI Takahiro
- [U-Boot] [PATCH 1/2] cmd: bootefi: move bootefi_test_prepare() forward
AKASHI Takahiro
- [U-Boot] [PATCH 2/2] cmd: bootefi: rework do_bootefi()
AKASHI Takahiro
- [U-Boot] [PATCH 2/2] cmd: bootefi: rework do_bootefi()
AKASHI Takahiro
- [U-Boot] [RFC 1/1] efi_loader: in situ relocation
AKASHI Takahiro
- [U-Boot] [PATCH v6 7/7] cmd: efidebug: add memmap command
AKASHI Takahiro
- [U-Boot] [PATCH v6 3/7] cmd: efidebug: add devices command
AKASHI Takahiro
- [U-Boot] [PATCH v6 4/7] cmd: efidebug: add drivers command
AKASHI Takahiro
- [U-Boot] [PATCH v6 2/7] cmd: add efidebug command
AKASHI Takahiro
- [U-Boot] [PATCH v6.2] cmd: env: add "-e" option for handling UEFI variables
AKASHI Takahiro
- [U-Boot] [PATCH v6 3/7] cmd: efidebug: add devices command
AKASHI Takahiro
- [U-Boot] [PATCH v6 7/7] cmd: efidebug: add memmap command
AKASHI Takahiro
- [U-Boot] [PATCH v7 0/7] cmd: add efidebug for efi environment
AKASHI Takahiro
- [U-Boot] [PATCH v7 1/7] cmd: env: add "-e" option for handling UEFI variables
AKASHI Takahiro
- [U-Boot] [PATCH v7 2/7] cmd: add efidebug command
AKASHI Takahiro
- [U-Boot] [PATCH v7 3/7] cmd: efidebug: add devices command
AKASHI Takahiro
- [U-Boot] [PATCH v7 4/7] cmd: efidebug: add drivers command
AKASHI Takahiro
- [U-Boot] [PATCH v7 5/7] cmd: efidebug: add dh command
AKASHI Takahiro
- [U-Boot] [PATCH v7 6/7] cmd: efidebug: add images command
AKASHI Takahiro
- [U-Boot] [PATCH v7 7/7] cmd: efidebug: add memmap command
AKASHI Takahiro
- [U-Boot] [PATCH v7 4/7] cmd: efidebug: add drivers command
AKASHI Takahiro
- [U-Boot] [PATCH v7 1/7] cmd: env: add "-e" option for handling UEFI variables
AKASHI Takahiro
- [U-Boot] [PATCH v7 2/7] cmd: add efidebug command
AKASHI Takahiro
- [U-Boot] [RFC 1/1] efi_loader: in situ relocation
AKASHI Takahiro
- [U-Boot] [PATCH v7 4/7] cmd: efidebug: add drivers command
AKASHI Takahiro
- [U-Boot] [PATCH v8 0/8] cmd: add efidebug for efi environment
AKASHI Takahiro
- [U-Boot] [PATCH v8 1/8] cmd: env: add "-e" option for handling UEFI variables
AKASHI Takahiro
- [U-Boot] [PATCH v8 2/8] efi_loader: define load option attributes
AKASHI Takahiro
- [U-Boot] [PATCH v8 3/8] cmd: add efidebug command
AKASHI Takahiro
- [U-Boot] [PATCH v8 4/8] cmd: efidebug: add devices command
AKASHI Takahiro
- [U-Boot] [PATCH v8 5/8] cmd: efidebug: add drivers command
AKASHI Takahiro
- [U-Boot] [PATCH v8 6/8] cmd: efidebug: add dh command
AKASHI Takahiro
- [U-Boot] [PATCH v8 7/8] cmd: efidebug: add images command
AKASHI Takahiro
- [U-Boot] [PATCH v8 8/8] cmd: efidebug: add memmap command
AKASHI Takahiro
- [U-Boot] [PATCH v7 1/7] cmd: env: add "-e" option for handling UEFI variables
AKASHI Takahiro
- [U-Boot] [PATCH v8 4/8] cmd: efidebug: add devices command
AKASHI Takahiro
- [U-Boot] [RFC] efi_loader: memory type in device path allocation
AKASHI Takahiro
- [U-Boot] [PATCH v9 0/8] cmd: add efidebug for efi environment
AKASHI Takahiro
- [U-Boot] [PATCH v9 1/8] cmd: env: add "-e" option for handling UEFI variables
AKASHI Takahiro
- [U-Boot] [PATCH v9 2/8] efi_loader: define load option attributes
AKASHI Takahiro
- [U-Boot] [PATCH v9 3/8] cmd: add efidebug command
AKASHI Takahiro
- [U-Boot] [PATCH v9 4/8] cmd: efidebug: add devices command
AKASHI Takahiro
- [U-Boot] [PATCH v9 5/8] cmd: efidebug: add drivers command
AKASHI Takahiro
- [U-Boot] [PATCH v9 6/8] cmd: efidebug: add dh command
AKASHI Takahiro
- [U-Boot] [PATCH v9 7/8] cmd: efidebug: add images command
AKASHI Takahiro
- [U-Boot] [PATCH v9 8/8] cmd: efidebug: add memmap command
AKASHI Takahiro
- [U-Boot] [PATCH v2 1/5] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior
AKASHI Takahiro
- [U-Boot] [PATCH v2 4/5] cmd: bootefi: run an EFI application of a specific load option
AKASHI Takahiro
- [U-Boot] [PATCH v2 5/5] cmd: run: add "-e" option to run an EFI application
AKASHI Takahiro
- [U-Boot] [PATCH v2 1/5] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior
AKASHI Takahiro
- [U-Boot] [PATCH v2 5/5] cmd: run: add "-e" option to run an EFI application
AKASHI Takahiro
- [U-Boot] [PATCH v2 4/5] cmd: bootefi: run an EFI application of a specific load option
AKASHI Takahiro
- [U-Boot] [PATCH v2 1/5] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior
AKASHI Takahiro
- [U-Boot] [PATCH v2 4/5] cmd: bootefi: run an EFI application of a specific load option
AKASHI Takahiro
- [U-Boot] [PATCH v2 5/5] cmd: run: add "-e" option to run an EFI application
AKASHI Takahiro
- [U-Boot] [PATCH v2 5/5] cmd: run: add "-e" option to run an EFI application
AKASHI Takahiro
- [U-Boot] [PATCH] spi: cadence_qspi: Add quad write support
Ley Foon Tan
- [U-Boot] [PATCH] spi: cadence_qspi: Add quad write support
Ley Foon Tan
- [U-Boot] [PATCH v2] spi: cadence_qspi: Add quad write support
Ley Foon Tan
- [U-Boot] [PATCH v3 16/20] mtd: spi: Add lightweight SPI flash stack for SPL
Jagan Teki
- [U-Boot] [PATCH v3 19/20] configs: Don't use SPI_FLASH_BAR as default
Jagan Teki
- [U-Boot] [PATCH v2 1/2] Kconfig: Migrate CONFIG_BUILD_TARGET
Jagan Teki
- [U-Boot] IMX6 NAND boot regression
Jagan Teki
- [U-Boot] [PATCH v3 19/20] configs: Don't use SPI_FLASH_BAR as default
Jagan Teki
- [U-Boot] [PATCH v3 16/20] mtd: spi: Add lightweight SPI flash stack for SPL
Jagan Teki
- [U-Boot] [PATCH v3 00/20] SF: Migrate to Linux SPI NOR framework
Jagan Teki
- [U-Boot] [PATCH v3 0/5] spi-flash: switch to "jedec, spi-nor" binding
Jagan Teki
- [U-Boot] [PATCH v4 00/20] SF: Migrate to Linux SPI NOR framework
Jagan Teki
- [U-Boot] Pull request: u-boot-spi/master
Jagan Teki
- [U-Boot] [PATCH 1/3] spi: Kconfig: Mark CONFIG_SPI as Legacy spi support
Jagan Teki
- [U-Boot] [PATCH 2/3] mtd: spi: Kconfig: Update CONFIG_SPI_FLASH
Jagan Teki
- [U-Boot] [PATCH 3/3] mtd: spi: Kconfig: Select SPI_FLASH if DM_SPI_FLASH
Jagan Teki
- [U-Boot] [PATCH 00/10] spi: Add Allwinner A31 SPI driver
Jagan Teki
- [U-Boot] [PATCH 01/10] spi: sun4i: Poll for rxfifo empty
Jagan Teki
- [U-Boot] [PATCH 02/10] clk: sunxi: Implement SPI clocks, resets
Jagan Teki
- [U-Boot] [PATCH 03/10] spi: sun4i: Simplify reg writes using set/clrbits_le32
Jagan Teki
- [U-Boot] [PATCH 04/10] spi: sun4i: Access registers and bits via enum offsets
Jagan Teki
- [U-Boot] [PATCH 05/10] spi: sun4i: Support fifo_depth via drvdata
Jagan Teki
- [U-Boot] [PATCH 06/10] spi: sun4i: Add CLK support
Jagan Teki
- [U-Boot] [PATCH 07/10] spi: sun4: Add A31 spi controller support
Jagan Teki
- [U-Boot] [PATCH 08/10] spi: sun4i: Driver cleanup
Jagan Teki
- [U-Boot] [PATCH 09/10] spi: kconfig: Enable SUN4I_SPI by default if ARCH_SUNXI
Jagan Teki
- [U-Boot] [PATCH 10/10] board: sopine: Enable SPI/SPI-FLASH
Jagan Teki
- [U-Boot] [PATCH] arm: sunxi: Enable SPL/SPI boot for Olinuxino Lime2-eMMC boards
Jagan Teki
- [U-Boot] [PATCH] sf: Add support for Macronix mx25u12835f
Jagan Teki
- [U-Boot] [PATCH v2] mtd: add spi flash id s25fl064l
Jagan Teki
- [U-Boot] [PATCH v2 1/2] distro_bootcmd: add spi flash boot command
Jagan Teki
- [U-Boot] [PATCH] configs: tbs_a711: lower dram frequency
Jagan Teki
- [U-Boot] [PATCH v3] dm: spi: Read default speed and mode values from DT
Jagan Teki
- [U-Boot] [PATCH] mtd: qspi: support read the flag status in fspi driver
Jagan Teki
- [U-Boot] [PATCH] spi: qspi: Fix issue when booting with DDR mode
Jagan Teki
- [U-Boot] [PATCH 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1
Jagan Teki
- [U-Boot] [PATCH v2 00/13] net: Add Allwinner EMAC CLK, RESET support
Jagan Teki
- [U-Boot] [PATCH v2 01/13] clk: sunxi: Implement A10 EMAC clocks
Jagan Teki
- [U-Boot] [PATCH v2 02/13] net: sunxi_emac: Add CLK support
Jagan Teki
- [U-Boot] [PATCH v2 03/13] net: sun8i_emac: Retrieve GMAC clock via 'syscon' phandle
Jagan Teki
- [U-Boot] [PATCH v2 04/13] clk: Get the CLK by index without device
Jagan Teki
- [U-Boot] [PATCH v2 05/13] clk: Use clk_get_by_index_tail()
Jagan Teki
- [U-Boot] [PATCH v2 06/13] test/dm: clk: Add clk_get_by_index[_nodev] test
Jagan Teki
- [U-Boot] [PATCH v2 07/13] reset: Get the RESET by index without device
Jagan Teki
- [U-Boot] [PATCH v2 08/13] test/dm: reset: Add reset_get_by_index[_nodev] test
Jagan Teki
- [U-Boot] [PATCH v2 09/13] clk: sunxi: Implement EMAC, GMAC clocks, resets
Jagan Teki
- [U-Boot] [PATCH v2 10/13] net: sun8i_emac: Add CLK and RESET support
Jagan Teki
- [U-Boot] [PATCH v2 11/13] clk: sunxi: h3: Implement EPHY CLK and RESET
Jagan Teki
- [U-Boot] [PATCH v2 12/13] net: sun8i_emac: Add EPHY CLK and RESET support
Jagan Teki
- [U-Boot] [PATCH v2 13/13] board: sunxi: gmac: Remove Ethernet clock and reset
Jagan Teki
- [U-Boot] [PATCH] Kconfig: fix BUILD_TARGET for ARCH_MVEBU
Jagan Teki
- [U-Boot] [PATCH v4 0/4] spi-flash: switch to "jedec, spi-nor" binding
Jagan Teki
- [U-Boot] [PATCH v2] mtd: add spi flash id s25fl064l
Jagan Teki
- [U-Boot] [PATCH] sun50i: h5: Orange Pi Zero Plus: Fix SdCard detection
Jagan Teki
- [U-Boot] [linux-sunxi] [PATCH v2 0/4] sunxi: SPI: Add SUN6I generation SPI support
Jagan Teki
- [U-Boot] [PATCH] configs: tbs_a711: lower dram frequency
Jagan Teki
- [U-Boot] [PATCH 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1
Jagan Teki
- [U-Boot] [PATCH 2/3] mtd: spi: Kconfig: Update CONFIG_SPI_FLASH
Jagan Teki
- [U-Boot] [PATCH 3/3] mtd: spi: Kconfig: Select SPI_FLASH if DM_SPI_FLASH
Jagan Teki
- [U-Boot] [PATCH 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1
Jagan Teki
- [U-Boot] [PATCH 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1
Jagan Teki
- [U-Boot] [PATCH 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1
Jagan Teki
- [U-Boot] [PATCH 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1
Jagan Teki
- [U-Boot] [PATCH 03/10] spi: sun4i: Simplify reg writes using set/clrbits_le32
Jagan Teki
- [U-Boot] [PATCH 10/10] board: sopine: Enable SPI/SPI-FLASH
Jagan Teki
- [U-Boot] [PATCH 06/10] spi: sun4i: Add CLK support
Jagan Teki
- [U-Boot] [PATCH 07/10] spi: sun4: Add A31 spi controller support
Jagan Teki
- [U-Boot] [PATCH 2/3] sunxi: Rename Sinovoip BPI M2 Plus to Bananapi M2 Plus H3
Jagan Teki
- [U-Boot] [PATCH 4/4] power: axp818: Fix typo in axp_set_dldo
Jagan Teki
- [U-Boot] [PATCH 2/4] sunxi: Fix build when CONFIG_CMD_PXE or CONFIG_CMD_DHCP are disabled
Jagan Teki
- [U-Boot] [ANN] Monthly developer call
Jagan Teki
- [U-Boot] [PATCH v2 0/8] spi: Add Allwinner A31 SPI driver
Jagan Teki
- [U-Boot] [PATCH v2 1/8] spi: sun4i: Poll for rxfifo empty
Jagan Teki
- [U-Boot] [PATCH v2 2/8] clk: sunxi: Implement SPI clocks, resets
Jagan Teki
- [U-Boot] [PATCH v2 3/8] spi: sun4i: Simplify reg writes using set/clrbits_le32
Jagan Teki
- [U-Boot] [PATCH v2 4/8] spi: sun4i: Access registers and bits via enum offsets
Jagan Teki
- [U-Boot] [PATCH v2 5/8] spi: sun4i: Support fifo_depth via drvdata
Jagan Teki
- [U-Boot] [PATCH v2 6/8] spi: sun4i: Add CLK support
Jagan Teki
- [U-Boot] [PATCH v2 7/8] spi: sun4: Add A31 spi controller support
Jagan Teki
- [U-Boot] [PATCH v2 8/8] spi: sun4i: Driver cleanup
Jagan Teki
- [U-Boot] [PATCH v3] dm: spi: Read default speed and mode values from DT
Jagan Teki
- [U-Boot] [PATCH] sf: Add Macronix MX25R6435F SPI NOR flash to flash parameters array
Jagan Teki
- [U-Boot] [PATCH 1/3] videomodes: Allow EDID timings where hsync/vsync pulse is 0
Jagan Teki
- [U-Boot] Pull request: u-boot-sunxi/master
Jagan Teki
- [U-Boot] [PATCH v2 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1
Jagan Teki
- [U-Boot] [PATCH v2 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1
Jagan Teki
- [U-Boot] [PATCH v2 8/8] spi: sun4i: Driver cleanup
Jagan Teki
- [U-Boot] [PATCH v2 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1
Jagan Teki
- [U-Boot] [PATCH v2 2/3] sunxi: Rename Sinovoip BPI M2 Plus to Bananapi M2 Plus H3
Jagan Teki
- [U-Boot] [PATCH v2 2/3] sunxi: Rename Sinovoip BPI M2 Plus to Bananapi M2 Plus H3
Jagan Teki
- [U-Boot] [PATCH V2 1/3] sunxi: Use clrsetbits_le32 instead of multiple instruction
Jagan Teki
- [U-Boot] [PATCH v2 7/8] spi: sun4: Add A31 spi controller support
Jagan Teki
- [U-Boot] [PATCH v2 4/8] spi: sun4i: Access registers and bits via enum offsets
Jagan Teki
- [U-Boot] [PATCH v2 4/8] spi: sun4i: Access registers and bits via enum offsets
Jagan Teki
- [U-Boot] [PATCH v3 0/9] spi: Add Allwinner A31 SPI driver
Jagan Teki
- [U-Boot] [PATCH v3 1/9] spi: sun4i: Poll for rxfifo to be filled up
Jagan Teki
- [U-Boot] [PATCH v3 2/9] clk: sunxi: Implement SPI clocks, resets
Jagan Teki
- [U-Boot] [PATCH v3 3/9] spi: sun4i: Simplify reg writes using set/clrbits_le32
Jagan Teki
- [U-Boot] [PATCH v3 4/9] spi: sun4i: Access registers and bits via enum offsets
Jagan Teki
- [U-Boot] [PATCH v3 5/9] spi: sun4i: Support fifo_depth via drvdata
Jagan Teki
- [U-Boot] [PATCH v3 6/9] spi: sun4i: Add CLK support
Jagan Teki
- [U-Boot] [PATCH v3 7/9] spi: sun4: Add A31 spi controller support
Jagan Teki
- [U-Boot] [PATCH v3 8/9] spi: sun4i: Driver cleanup
Jagan Teki
- [U-Boot] [PATCH v3 9/9] spi: Rename sun4i_spi.c into spi-sunxi.c
Jagan Teki
- [U-Boot] [PATCH v3 00/13] net: Add Allwinner EMAC CLK, RESET support
Jagan Teki
- [U-Boot] [PATCH v3 01/13] clk: sunxi: Implement A10 EMAC clocks
Jagan Teki
- [U-Boot] [PATCH v3 02/13] net: sunxi_emac: Add CLK support
Jagan Teki
- [U-Boot] [PATCH v3 03/13] net: sun8i_emac: Retrieve GMAC clock via 'syscon' phandle
Jagan Teki
- [U-Boot] [PATCH v3 04/13] clk: Get the CLK by index without device
Jagan Teki
- [U-Boot] [PATCH v3 05/13] clk: Use clk_get_by_index_tail()
Jagan Teki
- [U-Boot] [PATCH v3 06/13] test/dm: clk: Add clk_get_by_index[_nodev] test
Jagan Teki
- [U-Boot] [PATCH v3 07/13] reset: Get the RESET by index without device
Jagan Teki
- [U-Boot] [PATCH v3 08/13] test/dm: reset: Add reset_get_by_index[_nodev] test
Jagan Teki
- [U-Boot] [PATCH v3 09/13] clk: sunxi: Implement EMAC, GMAC clocks, resets
Jagan Teki
- [U-Boot] [PATCH v3 10/13] net: sun8i_emac: Add CLK and RESET support
Jagan Teki
- [U-Boot] [PATCH v3 11/13] clk: sunxi: h3: Implement EPHY CLK and RESET
Jagan Teki
- [U-Boot] [PATCH v3 12/13] net: sun8i_emac: Add EPHY CLK and RESET support
Jagan Teki
- [U-Boot] [PATCH v3 13/13] board: sunxi: gmac: Remove Ethernet clock and reset
Jagan Teki
- [U-Boot] Pull request: u-boot-sunxi/master
Jagan Teki
- [U-Boot] [RFC] efi_loader: EFI variables
Daniel Thompson
- [U-Boot] eMMC boot partition possible with an eMMC 4.2 controller ?
Joakim Tjernlund
- [U-Boot] [PATCH v2 1/2] splash: Use splashfile instead of location->name
Melin Tomas
- [U-Boot] [PATCH v2 1/2] splash: Use splashfile instead of location->name
Melin Tomas
- [U-Boot] [PATCH v2 1/2] splash: Use splashfile instead of location->name
Melin Tomas
- [U-Boot] [PATCH v2 1/2] splash: Use splashfile instead of location->name
Melin Tomas
- [U-Boot] [PATCH v2 1/2] splash: Use splashfile instead of location->name
Melin Tomas
- [U-Boot] [PATCH v3 1/2] splash: Use splashfile instead of location->name
Melin Tomas
- [U-Boot] [U-Boot, 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now
Philipp Tomsich
- [U-Boot] [U-Boot, 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now
Philipp Tomsich
- [U-Boot] [U-Boot, 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now【请注意,邮件由u-boot-bounces at lists.denx.de代发】
Philipp Tomsich
- [U-Boot] [U-Boot, 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now【请注意,邮件由u-boot-bounces at lists.denx.de代发】
Philipp Tomsich
- [U-Boot] [PATCH 1/2] rockchip: rk3399-puma: enable SPL_ATF_NO_PLATFORM_PARAM
Philipp Tomsich
- [U-Boot] [PATCH 2/2] rockchip: rk3399: spl: ensure that debug_uart_init is called
Philipp Tomsich
- [U-Boot] [PATCH 2/2] rockchip: rk3399: spl: ensure that debug_uart_init is called
Philipp Tomsich
- [U-Boot] [PATCH 1/2] rockchip: rk3399-puma: enable SPL_ATF_NO_PLATFORM_PARAM
Philipp Tomsich
- [U-Boot] [PULL] Please pull u-boot-rockchip:tags/for-master-20190201
Philipp Tomsich
- [U-Boot] [PULL] Please pull u-boot-rockchip:tags/for-master-20190201
Philipp Tomsich
- [U-Boot] [PATCH] rockchip: rk3399-puma: support Gigadevice SPI-NOR flash
Philipp Tomsich
- [U-Boot] [PATCH 0/8] rockchip: Improve SPI-NOR read performance for the RK3399-Q7
Philipp Tomsich
- [U-Boot] [PATCH 1/8] rockchip: spi: add debug message for delay in CS toggle
Philipp Tomsich
- [U-Boot] [PATCH 2/8] rockchip: spi: remove unused code and fields in priv
Philipp Tomsich
- [U-Boot] [PATCH 3/8] rockchip: spi: fix off-by-one in chunk size computation
Philipp Tomsich
- [U-Boot] [PATCH 4/8] rockchip: spi: consistently use false/true with rkspi_enable_chip
Philipp Tomsich
- [U-Boot] [PATCH 5/8] rockchip: spi: only wait for completion, if transmitting
Philipp Tomsich
- [U-Boot] [PATCH 6/8] rockchip: spi: add optimised receive-only implementation
Philipp Tomsich
- [U-Boot] [PATCH 7/8] rockchip: spi: add driver-data and a 'rxonly_manages_fifo' flag
Philipp Tomsich
- [U-Boot] [PATCH 8/8] rockchip: spi: make optimised receive-handler unaligned-safe
Philipp Tomsich
- [U-Boot] [PATCH] rockchip: Remove rejected files with .rej suffix
Philipp Tomsich
- [U-Boot] [PATCH] rockchip: Remove rejected files with .rej suffix
Philipp Tomsich
- [U-Boot] [PULL] Please pull u-boot-rockchip: tags/for-master-20190205
Philipp Tomsich
- [U-Boot] [PULL] Please pull u-boot-rockchip:tags/for-master-20190201
Philipp Tomsich
- [U-Boot] [PATCH] .gitignore: ignore patch rejects (*.rej) files
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 7/9] rockchip: defconfig: Clean the unused pinctrl config
Philipp Tomsich
- [U-Boot] [PATCH] rockchip: make_fit_atf: Use BL31 environ variable for file location
Philipp Tomsich
- [U-Boot] [PATCH] rockchip: make_fit_atf: Use BL31 environ variable for file location
Philipp Tomsich
- [U-Boot] [PATCH] .gitignore: ignore patch rejects (*.rej) files
Philipp Tomsich
- [U-Boot] [PATCH 2/3] arm: introduce _relaxed MMIO accessors
Philipp Tomsich
- [U-Boot] [PATCH 1/3] arm: clean up asm/io.h
Philipp Tomsich
- [U-Boot] [PATCH 1/2] configs: Remove version control leftovers
Philipp Tomsich
- [U-Boot] [PATCH 2/3] arm: introduce _relaxed MMIO accessors
Philipp Tomsich
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
Philipp Tomsich
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
Philipp Tomsich
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
Philipp Tomsich
- [U-Boot] [PATCH 0/7] SMP support for RISC-V
Philipp Tomsich
- [U-Boot] [PATCH] pinctrl: rockchip: Add 32bit writing function for rk3288 gpio0 pinctrl
Philipp Tomsich
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
Philipp Tomsich
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
Philipp Tomsich
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
Philipp Tomsich
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
Philipp Tomsich
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
Philipp Tomsich
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
Philipp Tomsich
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
Philipp Tomsich
- [U-Boot] [RFC 1/1] configs: rk3288: SPL file must fit into 32 KiB
Philipp Tomsich
- [U-Boot] [RFC 1/1] configs: rk3288: SPL file must fit into 32 KiB
Philipp Tomsich
- [U-Boot] [RFC 1/1] configs: rk3288: SPL file must fit into 32 KiB
Philipp Tomsich
- [U-Boot] [PATCH] lib/crc16: use non-C99 loop style
Philipp Tomsich
- [U-Boot] [PATCH] lib/crc16: use non-C99 loop style
Philipp Tomsich
- [U-Boot] [PATCH] lib/crc16: use non-C99 loop style
Philipp Tomsich
- [U-Boot] [PATCH V2 3/3] sunxi: Fix A33 memory initialization
Philipp Tomsich
- [U-Boot] [PATCH v2 1/1] configs: rk3288: Tinker Board SPL file must fit into 32 KiB
Philipp Tomsich
- [U-Boot] [PATCH V2 3/3] sunxi: Fix A33 memory initialization
Philipp Tomsich
- [U-Boot] [PATCH V2 3/3] sunxi: Fix A33 memory initialization
Philipp Tomsich
- [U-Boot] [PATCH 2/9] Makefile: use "arm64" architecture for U-Boot image files
Philipp Tomsich
- [U-Boot] [PATCH 3/9] SPL: read and store arch property from U-Boot image
Philipp Tomsich
- [U-Boot] [PATCH 3/9] SPL: read and store arch property from U-Boot image
Philipp Tomsich
- [U-Boot] [PATCH 4/9] sunxi: introduce RMR switch to enter payloads in 64-bit mode
Philipp Tomsich
- [U-Boot] [PATCH v7 1/7] cmd: env: add "-e" option for handling UEFI variables
Philipp Tomsich
- [U-Boot] [PATCH 2/3] env: Don't check CONFIG_ENV_OFFSET_REDUND for SPL build
Philipp Tomsich
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
Philipp Tomsich
- [U-Boot] [RFC PATCH 1/3] sunxi: Use clrsetbits_le32 instead of multiple instruction
Michael Trimarchi
- [U-Boot] [RFC PATCH 2/3] sunxi: Don't change the rank in dram size detection in A33
Michael Trimarchi
- [U-Boot] [RFC PATCH 3/3] sunxi: Fix A33 memory initialization
Michael Trimarchi
- [U-Boot] [PATCH V2 1/3] sunxi: Use clrsetbits_le32 instead of multiple instruction
Michael Trimarchi
- [U-Boot] [PATCH V2 2/3] sunxi: Don't change the rank in dram size detection in A33
Michael Trimarchi
- [U-Boot] [PATCH V2 3/3] sunxi: Fix A33 memory initialization
Michael Trimarchi
- [U-Boot] [RFC PATCH 2/3] sunxi: Don't change the rank in dram size detection in A33
Michael Nazzareno Trimarchi
- [U-Boot] [RFC PATCH 3/3] sunxi: Fix A33 memory initialization
Michael Nazzareno Trimarchi
- [U-Boot] [RFC PATCH 2/3] sunxi: Don't change the rank in dram size detection in A33
Michael Nazzareno Trimarchi
- [U-Boot] [PATCH V2 3/3] sunxi: Fix A33 memory initialization
Michael Nazzareno Trimarchi
- [U-Boot] [PATCH V2 3/3] sunxi: Fix A33 memory initialization
Michael Nazzareno Trimarchi
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
Michael Nazzareno Trimarchi
- [U-Boot] [PATCH 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1
Chen-Yu Tsai
- [U-Boot] [PATCH 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1
Chen-Yu Tsai
- [U-Boot] [PATCH 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1
Chen-Yu Tsai
- [U-Boot] [PATCH 07/10] spi: sun4: Add A31 spi controller support
Chen-Yu Tsai
- [U-Boot] [PATCH 2/3] sunxi: Rename Sinovoip BPI M2 Plus to Bananapi M2 Plus H3
Chen-Yu Tsai
- [U-Boot] [PATCH v2 0/3] sunxi: Sync Bananapi M2+ dts files and add H5 variant
Chen-Yu Tsai
- [U-Boot] [PATCH v2 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1
Chen-Yu Tsai
- [U-Boot] [PATCH v2 2/3] sunxi: Rename Sinovoip BPI M2 Plus to Bananapi M2 Plus H3
Chen-Yu Tsai
- [U-Boot] [PATCH v2 3/3] sunxi: Add Bananapi M2+ H5 board
Chen-Yu Tsai
- [U-Boot] [PATCH v2 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1
Chen-Yu Tsai
- [U-Boot] [PATCH v2 2/3] sunxi: Rename Sinovoip BPI M2 Plus to Bananapi M2 Plus H3
Chen-Yu Tsai
- [U-Boot] [PATCH v2 1/3] sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1
Chen-Yu Tsai
- [U-Boot] [PATCH 2/3] ARM: rmobile: Add basic PSCI support for r8a7790 SoC
Oleksandr Tyshchenko
- [U-Boot] [BUG] ls1012afrwy: U-Boot no detect sd card
Bhaskar Upadhaya
- [U-Boot] [U-Boot, v2, 7/9] rockchip: defconfig: Clean the unused pinctrl config
Emmanuel Vadot
- [U-Boot] [PATCH] rockchip: make_fit_atf: Use BL31 environ variable for file location
Emmanuel Vadot
- [U-Boot] [PATCH] rockchip: make_fit_atf: Use BL31 environ variable for file location
Emmanuel Vadot
- [U-Boot] [PATCH v2] nand: fix up badblock skipping
Jiri Valek
- [U-Boot] [PATCH v2 1/2] fs: fat: dynamically allocate memory for temporary buffer
Marek Vasut
- [U-Boot] [PATCH v3] net: phy: add TSE PCS support to dwmac-socfpga
Marek Vasut
- [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Marek Vasut
- [U-Boot] [PATCH v7 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
Marek Vasut
- [U-Boot] [PATCH v7 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Marek Vasut
- [U-Boot] [PATCH v2 1/2] fs: fat: dynamically allocate memory for temporary buffer
Marek Vasut
- [U-Boot] [PATCH v7 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Marek Vasut
- [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Marek Vasut
- [U-Boot] [PATCH v7 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
Marek Vasut
- [U-Boot] [PATCH 1/2] fdt: Allow indicating a node is for U-Boot proper only
Marek Vasut
- [U-Boot] [PATCH 1/3] ARM: rmobile: Switch CPU to non-secure HYP mode for r8a7790 based boards
Marek Vasut
- [U-Boot] [PATCH 2/3] ARM: rmobile: Add basic PSCI support for r8a7790 SoC
Marek Vasut
- [U-Boot] [PATCH 3/3] ARM: rmobile: Add possibility to debug main PSCI commands
Marek Vasut
- [U-Boot] [PATCH] fs: ext4: Unmount FS in do_fs_type()
Marek Vasut
- [U-Boot] [PATCH 1/2] mmc: Export {sd,mmc}_select_mode_and_width()
Marek Vasut
- [U-Boot] [PATCH 2/2] mmc: tmio: renesas: Downgrade SD/MMC from UHS/HS200/HS400 modes before boot
Marek Vasut
- [U-Boot] [PATCH] mmc: Do not poll using CMD13 when changing timing
Marek Vasut
- [U-Boot] [PATCH 1/3] ARM: rmobile: Switch CPU to non-secure HYP mode for r8a7790 based boards
Marek Vasut
- [U-Boot] [PATCH 1/2] fdt: Allow indicating a node is for U-Boot proper only
Marek Vasut
- [U-Boot] [PULL] u-boot-sh/master
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: move gen5 SDR driver to DM
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: move gen5 SDR driver to DM
Marek Vasut
- [U-Boot] [PULL] u-boot-sh/master
Marek Vasut
- [U-Boot] [PULL] u-boot-sh/master
Marek Vasut
- [U-Boot] [PATCH 3/3] ARM: rmobile: Add possibility to debug main PSCI commands
Marek Vasut
- [U-Boot] [PATCH 2/3] ARM: rmobile: Add basic PSCI support for r8a7790 SoC
Marek Vasut
- [U-Boot] [PATCH 1/3] ARM: rmobile: Switch CPU to non-secure HYP mode for r8a7790 based boards
Marek Vasut
- [U-Boot] [PATCH 1/3] ARM: rmobile: Switch CPU to non-secure HYP mode for r8a7790 based boards
Marek Vasut
- [U-Boot] [PULL] u-boot-sh/master
Marek Vasut
- [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Marek Vasut
- [U-Boot] [PATCH v7 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
Marek Vasut
- [U-Boot] [PATCH 1/2] fdt: Allow indicating a node is for U-Boot proper only
Marek Vasut
- [U-Boot] [PATCH 2/3] ARM: rmobile: Add basic PSCI support for r8a7790 SoC
Marek Vasut
- [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Marek Vasut
- [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Marek Vasut
- [U-Boot] [PATCH v7 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Marek Vasut
- [U-Boot] [PATCH v7 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Marek Vasut
- [U-Boot] [PATCH v8 1/8] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Marek Vasut
- [U-Boot] [PATCH v8 2/8] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
Marek Vasut
- [U-Boot] [PATCH v8 3/8] fit: Add function declarations to the header file
Marek Vasut
- [U-Boot] [PATCH v8 4/8] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Marek Vasut
- [U-Boot] [PATCH v8 6/8] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs
Marek Vasut
- [U-Boot] [PATCH v8 2/8] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
Marek Vasut
- [U-Boot] [PATCH v3] net: phy: add TSE PCS support to dwmac-socfpga
Marek Vasut
- [U-Boot] [PATCH v8 1/8] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Marek Vasut
- [U-Boot] [PATCH v8 2/8] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
Marek Vasut
- [U-Boot] [PATCH v8 4/8] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Marek Vasut
- [U-Boot] [PATCH v8 6/8] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs
Marek Vasut
- [U-Boot] [PATCH v8 2/8] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
Marek Vasut
- [U-Boot] [PATCH v8 6/8] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs
Marek Vasut
- [U-Boot] [PATCH v8 3/8] fit: Add function declarations to the header file
Marek Vasut
- [U-Boot] [PATCH v8 4/8] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Marek Vasut
- [U-Boot] [PATCH] mmc: Downgrade SD/MMC from UHS/HS200/HS400 modes before boot
Marek Vasut
- [U-Boot] [PATCH v8 2/8] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
Marek Vasut
- [U-Boot] [PATCH v8 4/8] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Marek Vasut
- [U-Boot] [PATCH v8 6/8] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs
Marek Vasut
- [U-Boot] [PATCH v8 4/8] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Marek Vasut
- [U-Boot] [PATCH v8 2/8] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
Marek Vasut
- [U-Boot] [PATCH v8 6/8] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs
Marek Vasut
- [U-Boot] [PULL] u-boot-sh/master
Marek Vasut
- [U-Boot] [ANN] Monthly developer call
Marek Vasut
- [U-Boot] [ANN] Monthly developer call
Marek Vasut
- [U-Boot] [PATCH v1] mmc: dwmmc: Enable small delay before returning error
Marek Vasut
- [U-Boot] [PATCH v1] ARM: socfpga: stratix10: Return valid error code from FPGA driver
Marek Vasut
- [U-Boot] [PATCH 1/6] ARM: rmobile: Imply clock drivers per SoC
Marek Vasut
- [U-Boot] [PATCH 2/6] ARM: rmobile: Imply pinctrl drivers per SoC
Marek Vasut
- [U-Boot] [PATCH 3/6] clk: rmobile: Drop def_bool per SoC
Marek Vasut
- [U-Boot] [PATCH 4/6] pinctrl: renesas: Drop def_bool per SoC
Marek Vasut
- [U-Boot] [PATCH 5/6] ARM: rmobile: Imply SoC per board
Marek Vasut
- [U-Boot] [PATCH 6/6] ARM: rmobile: Sync Gen3 defconfigs
Marek Vasut
- [U-Boot] [PATCH v1] mmc: dwmmc: Enable small delay before returning error
Marek Vasut
- [U-Boot] [PATCH] ARM: cache: Fix incorrect bitwise operation
Marek Vasut
- [U-Boot] [PATCH] ARM: socfpga: Configure PL310 latencies
Marek Vasut
- [U-Boot] [PULL] u-boot-socfpga/master
Marek Vasut
- [U-Boot] [PATCH] ARM: rmobile: Convert Gen2 to OF_SEPARATE
Marek Vasut
- [U-Boot] [PATCH] treewide: Replace CONFIG_DM_SPI_FLASH with CONFIG_IS_ENABLED(DM_SPI_FLASH)
Marek Vasut
- [U-Boot] [PATCH] spi: sh_qspi: Replace CONFIG_DM_SPI with CONFIG_IS_ENABLED(DM_SPI)
Marek Vasut
- [U-Boot] [PATCH] ARM: dts: rmobile: Force 1-bit bus width on Gen2 QSPI
Marek Vasut
- [U-Boot] [PATCH] ARM: rmobile: Convert Gen2 Stout, Porter, Silk to DM_SPI{, _FLASH}
Marek Vasut
- [U-Boot] [PATCH] ARM: socfpga: Clear PL310 early in SPL
Marek Vasut
- [U-Boot] [PATCH] ARM: socfpga: Clear PL310 early in SPL
Marek Vasut
- [U-Boot] [PATCH] ARM: socfpga: Clear PL310 early in SPL
Marek Vasut
- [U-Boot] [PATCH] ARM: socfpga: Clear PL310 early in SPL
Marek Vasut
- [U-Boot] [PATCH] ARM: socfpga: Clear PL310 early in SPL
Marek Vasut
- [U-Boot] [PATCH V2] ARM: rmobile: Convert Gen2 Stout, Porter, Silk to DM_SPI{, _FLASH}
Marek Vasut
- [U-Boot] [PATCH] ARM: socfpga: Clear PL310 early in SPL
Marek Vasut
- [U-Boot] [PATCH] ARM: socfpga: Clear PL310 early in SPL
Marek Vasut
- [U-Boot] [PATCH] mmc: dw_mmc: Round up descriptor end to nearest multiple of cacheline size
Marek Vasut
- [U-Boot] [PATCH] treewide: Replace CONFIG_DM_SPI_FLASH with CONFIG_IS_ENABLED(DM_SPI_FLASH)
Marek Vasut
- [U-Boot] [PATCH] treewide: Replace CONFIG_DM_SPI_FLASH with CONFIG_IS_ENABLED(DM_SPI_FLASH)
Marek Vasut
- [U-Boot] [PATCH 2/4] Kconfig: tegra: Migrate USB_EHCI_TEGRA
Marek Vasut
- [U-Boot] [PATCH v3 1/1] gpio: altera_pio: fix get_value
Marek Vasut
- [U-Boot] [PATCH 2/4] Kconfig: tegra: Migrate USB_EHCI_TEGRA
Marek Vasut
- [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer
Marek Vasut
- [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer
Marek Vasut
- [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer
Marek Vasut
- [U-Boot] [PATCH V2] ARM: socfpga: Clear PL310 early in SPL
Marek Vasut
- [U-Boot] [PATCH 1/2] mmc: tmio: Clear BUSWIDTH bit when WMODE bit is set
Marek Vasut
- [U-Boot] [PATCH 2/2] mmc: renesas: Unconditionally set DTCNTL TAPNUM to 8
Marek Vasut
- [U-Boot] [PATCH v1] mmc: dwmmc: Enable small delay before returning error
Marek Vasut
- [U-Boot] [U-Boot, v3, 1/2] fs: fat: dynamically allocate memory for temporary buffer
Marek Vasut
- [U-Boot] [PATCH v2 1/8] arm: socfpga: gen5: sync devicetrees to Linux
Marek Vasut
- [U-Boot] [PATCH v2 2/8] arm: socfpga: gen5: add reset & sdr node to SPL devicetrees
Marek Vasut
- [U-Boot] [PATCH v2 5/8] spi: cadence_qspi: add reset handling
Marek Vasut
- [U-Boot] [PATCH v2 6/8] reset: socfpga: add reset handling for old kernels
Marek Vasut
- [U-Boot] [PATCH v2 7/8] arm: socfpga: gen5: deassert peripheral reset by default
Marek Vasut
- [U-Boot] [PATCH v2 8/8] arm: socfpga: implement proper peripheral reset
Marek Vasut
- [U-Boot] [PATCH v2 1/8] arm: socfpga: gen5: sync devicetrees to Linux
Marek Vasut
- [U-Boot] [PATCH v2 2/8] arm: socfpga: gen5: add reset & sdr node to SPL devicetrees
Marek Vasut
- [U-Boot] [PATCH v2 2/8] arm: socfpga: gen5: add reset & sdr node to SPL devicetrees
Marek Vasut
- [U-Boot] [PATCH v2 5/8] spi: cadence_qspi: add reset handling
Marek Vasut
- [U-Boot] [PATCH v2 6/8] reset: socfpga: add reset handling for old kernels
Marek Vasut
- [U-Boot] [PATCH v2 7/8] arm: socfpga: gen5: deassert peripheral reset by default
Marek Vasut
- [U-Boot] [PATCH v1] mmc: dwmmc: Enable small delay before returning error
Marek Vasut
- [U-Boot] [PATCH v2 2/8] arm: socfpga: gen5: add reset & sdr node to SPL devicetrees
Marek Vasut
- [U-Boot] [PATCH v2 5/8] spi: cadence_qspi: add reset handling
Marek Vasut
- [U-Boot] [PATCH v2 7/8] arm: socfpga: gen5: deassert peripheral reset by default
Marek Vasut
- [U-Boot] [PATCH v2 8/8] arm: socfpga: implement proper peripheral reset
Marek Vasut
- [U-Boot] [PATCH v2 2/8] arm: socfpga: gen5: add reset & sdr node to SPL devicetrees
Marek Vasut
- [U-Boot] [PATCH v2 8/8] arm: socfpga: implement proper peripheral reset
Marek Vasut
- [U-Boot] [PATCH v2 2/8] arm: socfpga: gen5: add reset & sdr node to SPL devicetrees
Marek Vasut
- [U-Boot] [PATCH v2 8/8] arm: socfpga: implement proper peripheral reset
Marek Vasut
- [U-Boot] [PATCH v2 8/8] arm: socfpga: implement proper peripheral reset
Marek Vasut
- [U-Boot] [PATCH 1/3] ARM: rmobile: Switch CPU to non-secure HYP mode for r8a7790 based boards
Marek Vasut
- [U-Boot] [PATCH 2/3] ARM: rmobile: Add basic PSCI support for r8a7790 SoC
Marek Vasut
- [U-Boot] [PULL] u-boot-sh/master
Marek Vasut
- [U-Boot] [PULL] u-boot-socfpga/master
Marek Vasut
- [U-Boot] [PATCH 2/3] arm: socfpga: a10: move SPL stack size to Kconfig
Marek Vasut
- [U-Boot] [PATCH 3/3] arm: socfpga: put initial U-Boot stack into DDR
Marek Vasut
- [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support
Abel Vesa
- [U-Boot] [PATCH v4 01/20] common: spl_fit: Fix the spl_fit_image_get_os for FIT_IMAGE_TINY
Abel Vesa
- [U-Boot] [PATCH v4 02/20] usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE
Abel Vesa
- [U-Boot] [PATCH v4 03/20] usb: ehci-mx6: Make regulator DM_REGULATOR dependent
Abel Vesa
- [U-Boot] [PATCH v4 04/20] configs: imx6sabreauto: Add DM_MMC support
Abel Vesa
- [U-Boot] [PATCH v4 05/20] configs: imx6sabreauto: Add DM_USB support
Abel Vesa
- [U-Boot] [PATCH v4 06/20] mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds
Abel Vesa
- [U-Boot] [PATCH v4 07/20] board: mx6sabresd: Add board_fit_config_name_match to support FIT in SPL
Abel Vesa
- [U-Boot] [PATCH v4 08/20] board: mx6sabreauto: Add board_fit_config_name_match to support FIT in SPL
Abel Vesa
- [U-Boot] [PATCH v4 09/20] arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files
Abel Vesa
- [U-Boot] [PATCH v4 10/20] arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd]
Abel Vesa
- [U-Boot] [PATCH v4 11/20] configs: mx6sabreauto: Add SPL FIT and DM support
Abel Vesa
- [U-Boot] [PATCH v4 12/20] configs: mx6sabresd: Add SPL FIT and DM support
Abel Vesa
- [U-Boot] [PATCH v4 13/20] mx6sabreauto: Add DM_GPIO support
Abel Vesa
- [U-Boot] [PATCH v4 14/20] mx6sabresd: Add DM_GPIO support
Abel Vesa
- [U-Boot] [PATCH v4 15/20] configs: mx6sabreauto: Add DM_SPI_FLASH necessary configs
Abel Vesa
- [U-Boot] [PATCH v4 16/20] configs: mx6sabresd: Add DM_SPI_FLASH necessary configs
Abel Vesa
- [U-Boot] [PATCH v4 17/20] board: mx6sabreauto: Remove the non-DM code
Abel Vesa
- [U-Boot] [PATCH v4 18/20] board: mx6sabresd: Remove non-DM code
Abel Vesa
- [U-Boot] [PATCH v4 19/20] board: mx6sabresd: Remove the enet reset gpio handling
Abel Vesa
- [U-Boot] [PATCH v4 20/20] configs: mx6sabresd: Reduce SPL size by disabling DOS, EXT and EFI support
Abel Vesa
- [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support
Abel Vesa
- [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support
Abel Vesa
- [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support
Abel Vesa
- [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support
Abel Vesa
- [U-Boot] [PATCH v4 01/20] common: spl_fit: Fix the spl_fit_image_get_os for FIT_IMAGE_TINY
Abel Vesa
- [U-Boot] [PATCH 1/3] configs: am65x_evm_r5: Enable GPT support
Lokesh Vutla
- [U-Boot] [PATCH 2/3] am65x_evm: Allow bootm to load larger kernels
Lokesh Vutla
- [U-Boot] [PATCH 3/3] armv7R: K3: am654: Fix order of debug elements in x509 template
Lokesh Vutla
- [U-Boot] [PATCH] arm: mach-k3: common: Clean up ATF image startup function
Lokesh Vutla
- [U-Boot] [PATCH v1 1/2] configs: k2g_evm: Enable CONFIG_BLK
Lokesh Vutla
- [U-Boot] [PATCH v1 2/2] configs: Enable CONFIG_BLK in am57xx_evm and am57xx_hs_evm
Lokesh Vutla
- [U-Boot] [PATCH 1/7] ARM: k2g-ice: Add pinmux support for rgmii interface
Lokesh Vutla
- [U-Boot] [PATCH 2/7] ARM: k2g-gp-evm: update to rgmii pinmux configuration
Lokesh Vutla
- [U-Boot] [PATCH] board: ti: Move fastboot functions out of TI_SECURE_DEVICE ifdef
Lokesh Vutla
- [U-Boot] [PATCH 1/7] arm: K3: Avoid use of MCU_PSRAM0 before SYSFW is loaded
Lokesh Vutla
- [U-Boot] [PATCH 2/7] firmware: ti_sci: Add support for firewall management
Lokesh Vutla
- [U-Boot] [PATCH 5/7] arm: mach-k3: Add secure device build support
Lokesh Vutla
- [U-Boot] [PATCH 5/7] arm: mach-k3: Add secure device build support
Lokesh Vutla
- [U-Boot] [PATCH 1/7] arm: K3: Avoid use of MCU_PSRAM0 before SYSFW is loaded
Lokesh Vutla
- [U-Boot] [PATCH v3 01/13] arm64: dts: k3: Sync sdhci0 node from kernel
Lokesh Vutla
- [U-Boot] Pincontroller not getting initialized on imx6 in SPL with SPL_PINCTRL and OF_CONTROL
Lokesh Vutla
- [U-Boot] Pincontroller not getting initialized on imx6 in SPL with SPL_PINCTRL and OF_CONTROL
Lokesh Vutla
- [U-Boot] [PATCH] configs: dra7xx_evm: Remove ENV_IS_IN_FAT and SPL_ENV_*
Lokesh Vutla
- [U-Boot] [PATCH] configs: dra7xx_evm: Remove ENV_IS_IN_FAT and SPL_ENV_*
Lokesh Vutla
- [U-Boot] [PATCH v2] configs: dra7xx_evm: Remove ENV_IS_IN_FAT
Lokesh Vutla
- [U-Boot] Booting linux zImage on vexpress-a15
Andre Wagner
- [U-Boot] Booting linux zImage on vexpress-a15
Andre Wagner
- [U-Boot] Booting linux zImage on vexpress-a15
Andre Wagner
- [U-Boot] [PATCH v2 00/11] SiFive FU540 Support
Paul Walmsley
- [U-Boot] [REGRESSION] tegra124: nyan-big: LPAE not working
Stephen Warren
- [U-Boot] [PATCH] ARM: tegra: Reserve 32MB for the Linux kernel
Stephen Warren
- [U-Boot] [PATCH] ARM: tegra: enable ums on nyan boards
Stephen Warren
- [U-Boot] [PATCH v2] ARM: tegra: enable ums on nyan boards
Stephen Warren
- [U-Boot] [PATCH v2 1/1] board: raspberrypi: add serial and revision to the device tree
Stephen Warren
- [U-Boot] [PATCH v2 1/1] board: raspberrypi: add serial and revision to the device tree
Stephen Warren
- [U-Boot] [PATCH] fs: ext4: cache extent data
Stephen Warren
- [U-Boot] ut dm pch sandbox test failures
Stephen Warren
- [U-Boot] ut dm pch sandbox test failures
Stephen Warren
- [U-Boot] [PATCH 1/2] kbuild: make arch-dtbs target PHONY
Stephen Warren
- [U-Boot] [PATCH 2/2] kbuild: fix DTB .cmd source variable
Stephen Warren
- [U-Boot] ut dm pch sandbox test failures
Stephen Warren
- [U-Boot] [PATCH 1/2] kbuild: make arch-dtbs target PHONY
Stephen Warren
- [U-Boot] [PATCH 1/2] kbuild: make arch-dtbs target PHONY
Stephen Warren
- [U-Boot] Pull request, u-boot-tegra/master
Tom Warren
- [U-Boot] Pull request, u-boot-tegra/master
Tom Warren
- [U-Boot] [PATCH 2/4] Kconfig: tegra: Migrate USB_EHCI_TEGRA
Tom Warren
- [U-Boot] [PATCH] test: Update test-imagetools.sh to match new syntax
Martyn Welch
- [U-Boot] [PATCH] test: Update test-imagetools.sh to match new syntax
Martyn Welch
- [U-Boot] [PATCH 1/3] Add support for the MT41K128M16JT125K memory modules
Martyn Welch
- [U-Boot] [PATCH 2/3] env: Don't check CONFIG_ENV_OFFSET_REDUND for SPL build
Martyn Welch
- [U-Boot] [PATCH 3/3] am335x, guardian: Add support for the bosch guardian board
Martyn Welch
- [U-Boot] [PATCH 3/3] am335x, guardian: Add support for the bosch guardian board
Martyn Welch
- [U-Boot] [PATCH 2/3] env: Don't check CONFIG_ENV_OFFSET_REDUND for SPL build
Martyn Welch
- [U-Boot] [PATCH 2/3] env: Don't check CONFIG_ENV_OFFSET_REDUND for SPL build
Martyn Welch
- [U-Boot] [PATCH v2 1/3] Add support for the MT41K128M16JT125K memory modules
Martyn Welch
- [U-Boot] [PATCH v2 2/3] env: Don't check CONFIG_ENV_OFFSET_REDUND for SPL build
Martyn Welch
- [U-Boot] [PATCH v2 3/3] am335x, guardian: Add support for the bosch guardian board
Martyn Welch
- [U-Boot] [PATCH] imx: mx6qsabrelite: Update the SabreLite README
Martyn Welch
- [U-Boot] [PATCH v3 1/3] Add support for the MT41K128M16JT125K memory modules
Martyn Welch
- [U-Boot] [PATCH v3 2/3] env: Don't check CONFIG_ENV_OFFSET_REDUND for SPL build
Martyn Welch
- [U-Boot] [PATCH v3 3/3] am335x, guardian: Add support for the bosch guardian board
Martyn Welch
- [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Westergreen, Dalon
- [U-Boot] [PATCH v8 6/8] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs
Westergreen, Dalon
- [U-Boot] [PATCH v8 6/8] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs
Westergreen, Dalon
- [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Dalon L Westergreen
- [U-Boot] [PATCH v7 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Dalon L Westergreen
- [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Dalon L Westergreen
- [U-Boot] [PATCH] arm: socfpga: move gen5 SDR driver to DM
Dalon L Westergreen
- [U-Boot] [PATCH] arm: socfpga: move gen5 SDR driver to DM
Dalon L Westergreen
- [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Dalon L Westergreen
- [U-Boot] [PATCH] arm: socfpga: move gen5 SDR driver to DM
Dalon L Westergreen
- [U-Boot] [PATCH v7 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Dalon L Westergreen
- [U-Boot] [PATCH v8 2/8] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
Dalon L Westergreen
- [U-Boot] [PATCH v9 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Dalon L Westergreen
- [U-Boot] [PATCH 2/2] efi_loader: set the dhcp ack received flag
Patrick Wildt
- [U-Boot] [RFC] Reserve ATF memory on Marvell Armdada 3700/7K/8K
Patrick Wildt
- [U-Boot] [PATCH] hikey: Allow environment to store in eMMC and increase bootdelay
Neil Williams
- [U-Boot] [PATCH] hikey: Allow environment to store in eMMC and increase bootdelay
Neil Williams
- [U-Boot] [RFC] Reserve ATF memory on Marvell Armdada 3700/7K/8K
Marcin Wojtas
- [U-Boot] [PATCH] MTD: mxs_nand: Fix BCH read timeout error on boards requiring ECC
Scott Wood
- [U-Boot] [PATCH 2/2] ARM: omap3_logic: Enable SPL booting device tree
Derald D. Woods
- [U-Boot] [PATCH 2/2] ARM: omap3_logic: Enable SPL booting device tree
Derald D. Woods
- [U-Boot] [PATCH 1/2] ARM: DTS: omap3-u-boot.dtsi
Derald D. Woods
- [U-Boot] [PATCH] ARM: omap3: evm: Update DM SPL support
Derald D. Woods
- [U-Boot] [PATCH 1/2] omap3_beagle: Update for DM SPL support
Derald D. Woods
- [U-Boot] [PATCH] ARM: at91: Apply PMECC header for NAND_BOOT only
Derald D. Woods
- [U-Boot] [PATCH] pinctrl: rockchip: Add 32bit writing function for rk3288 gpio0 pinctrl
David Wu
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
David Wu
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
David Wu
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
David Wu
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
David Wu
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
David Wu
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
David Wu
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
David Wu
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
David Wu
- [U-Boot] [BUG] booting on the Tinker Board (tinker-rk3288_defconfig) is broken
David Wu
- [U-Boot] [PATCH] .gitignore: ignore patch rejects (*.rej) files
Masahiro Yamada
- [U-Boot] [PATCH] preboot: Introduce CONFIG_USE_PREBOOT and migrate CONFIG_PREBOOT
Masahiro Yamada
- [U-Boot] [PATCH] ARM: dts: uniphier: sync with Linux 5.0-rc2
Masahiro Yamada
- [U-Boot] [PATCH 1/2] kbuild: make arch-dtbs target PHONY
Masahiro Yamada
- [U-Boot] [PATCH 1/2] kbuild: make arch-dtbs target PHONY
Masahiro Yamada
- [U-Boot] [PATCH 2/2] kbuild: fix DTB .cmd source variable
Masahiro Yamada
- [U-Boot] [PATCH 1/2] kbuild: make arch-dtbs target PHONY
Masahiro Yamada
- [U-Boot] [U-Boot, 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now【请注意,邮件由u-boot-bounces at lists.denx.de代发】
Andy Yan
- [U-Boot] [U-Boot, 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now【请注意,邮件由u-boot-bounces at lists.denx.de代发】
Kever Yang
- [U-Boot] [PATCH v3 0/2] While converting SATA on Apalis iMX6 to use driver model I noticed it
Marcel Ziswiler
- [U-Boot] [PATCH v3 1/2] dm: device: fail uclass_find_first_device() if list_empty
Marcel Ziswiler
- [U-Boot] [PATCH v3 2/2] cmd: sata: add null pointer check for dev
Marcel Ziswiler
- [U-Boot] [PATCH v1 0/3] imx: cpu.c, serial_mxc, dts fixes/improvements
Marcel Ziswiler
- [U-Boot] [PATCH v1 1/3] ARM: dts: i.MX6Q, i.MX6QDL: fix address/size-cells warnings
Marcel Ziswiler
- [U-Boot] [PATCH v1 2/3] imx: serial_mxc: disable ri and dcd irq in dte mode
Marcel Ziswiler
- [U-Boot] [PATCH v1 3/3] imx: cpu.c: give access to reset cause in spl
Marcel Ziswiler
- [U-Boot] [PATCH v1 0/3] toradex: common: fix/improve config block handling
Marcel Ziswiler
- [U-Boot] [PATCH v1 1/3] toradex: configblock: add an -y parameter to 'cfgblock create’
Marcel Ziswiler
- [U-Boot] [PATCH v1 2/3] toradex: common: unify behaviour when config block is missing
Marcel Ziswiler
- [U-Boot] [PATCH v1 3/3] tdx-cfg-block: fix off by one issue
Marcel Ziswiler
- [U-Boot] [PATCH v1 00/23] apalis imx6 fixes, device tree enablement and driver model conversion
Marcel Ziswiler
- [U-Boot] [PATCH v1 01/23] apalis_imx6: get rid of obsolete nospl configurations
Marcel Ziswiler
- [U-Boot] [PATCH v1 02/23] apalis_imx6: use distro defaults
Marcel Ziswiler
- [U-Boot] [PATCH v1 03/23] apalis_imx6: move console in env and dfu mmc from header file to defconfig
Marcel Ziswiler
- [U-Boot] [PATCH v1 04/23] apalis_imx6: enable fit image, gpt, imx thermal, efi loader support
Marcel Ziswiler
- [U-Boot] [PATCH v1 05/23] apalis_imx6: remove obsolete USB_GADGET_MASS_STORAGE configuration
Marcel Ziswiler
- [U-Boot] [PATCH v1 06/23] apalis_imx6: migrate to using device tree
Marcel Ziswiler
- [U-Boot] [PATCH v1 07/23] apalis_imx6: clean-up and migrate gpios to using driver model
Marcel Ziswiler
- [U-Boot] [PATCH v1 08/23] apalis_imx6: enable pin control driver
Marcel Ziswiler
- [U-Boot] [PATCH v1 09/23] apalis_imx6: migrate i2c to using driver model
Marcel Ziswiler
- [U-Boot] [PATCH v1 10/23] apalis_imx6: migrate pmic and regulator to using driver model
Marcel Ziswiler
- [U-Boot] [PATCH v1 11/23] apalis_imx6: migrate mmc and sata to using driver model
Marcel Ziswiler
- [U-Boot] [PATCH v1 12/23] apalis_imx6: migrate usb to using driver model
Marcel Ziswiler
- [U-Boot] [PATCH v1 13/23] apalis_imx6: drop CONFIG_OF_SYSTEM_SETUP
Marcel Ziswiler
- [U-Boot] [PATCH v1 14/23] apalis_imx6: add distroboot support
Marcel Ziswiler
- [U-Boot] [PATCH v1 15/23] apalis_imx6: use both sd/mmc interfaces for setsdupdate
Marcel Ziswiler
- [U-Boot] [PATCH v1 16/23] apalis_imx6: unify sd/mmc drive strength with linux kernel settings
Marcel Ziswiler
- [U-Boot] [PATCH v1 17/23] apalis_imx6: pf0100: reorder and cleanup message printing
Marcel Ziswiler
- [U-Boot] [PATCH v1 18/23] apalis_imx6: disable ri and dcd irq in uarts
Marcel Ziswiler
- [U-Boot] [PATCH v1 19/23] apalis_imx6: revert fuse value set in mfgr_fuse
Marcel Ziswiler
- [U-Boot] [PATCH v1 20/23] configs: apalis_imx6: Use ext4 file system by default
Marcel Ziswiler
- [U-Boot] [PATCH v1 21/23] apalis_imx6: use SDP if USB serial downloader has been used
Marcel Ziswiler
- [U-Boot] [PATCH v1 22/23] apalis_imx6: switch to zimage
Marcel Ziswiler
- [U-Boot] [PATCH v1 23/23] board: apalis_imx6: check for and report ecc errors in fuses
Marcel Ziswiler
- [U-Boot] [RFC PATCH v1] MLK-12883 usb: limit USB_MAX_XFER_BLK to 256
Marcel Ziswiler
- [U-Boot] [PATCH v2 00/23] apalis imx6 fixes, device tree enablement and driver model conversion
Marcel Ziswiler
- [U-Boot] [PATCH v2 01/23] apalis_imx6: get rid of obsolete nospl configurations
Marcel Ziswiler
- [U-Boot] [PATCH v2 02/23] apalis_imx6: use distro defaults
Marcel Ziswiler
- [U-Boot] [PATCH v2 03/23] apalis_imx6: move console in env from header file to defconfig
Marcel Ziswiler
- [U-Boot] [PATCH v2 04/23] apalis_imx6: enable fit image, gpt, imx thermal, efi loader support
Marcel Ziswiler
- [U-Boot] [PATCH v2 05/23] apalis_imx6: remove obsolete USB_GADGET_MASS_STORAGE configuration
Marcel Ziswiler
- [U-Boot] [PATCH v2 06/23] apalis_imx6: migrate to using device tree
Marcel Ziswiler
- [U-Boot] [PATCH v2 07/23] apalis_imx6: clean-up and migrate gpios to using driver model
Marcel Ziswiler
- [U-Boot] [PATCH v2 08/23] apalis_imx6: enable pin control driver
Marcel Ziswiler
- [U-Boot] [PATCH v2 09/23] apalis_imx6: migrate i2c to using driver model
Marcel Ziswiler
- [U-Boot] [PATCH v2 10/23] apalis_imx6: migrate pmic and regulator to using driver model
Marcel Ziswiler
- [U-Boot] [PATCH v2 11/23] apalis_imx6: migrate mmc and sata to using driver model
Marcel Ziswiler
- [U-Boot] [PATCH v2 12/23] apalis_imx6: migrate usb to using driver model
Marcel Ziswiler
- [U-Boot] [PATCH v2 13/23] apalis_imx6: drop CONFIG_OF_SYSTEM_SETUP
Marcel Ziswiler
- [U-Boot] [PATCH v2 14/23] apalis_imx6: add distroboot support
Marcel Ziswiler
- [U-Boot] [PATCH v2 15/23] apalis_imx6: use both sd/mmc interfaces for setsdupdate
Marcel Ziswiler
- [U-Boot] [PATCH v2 16/23] apalis_imx6: unify sd/mmc drive strength with linux kernel settings
Marcel Ziswiler
- [U-Boot] [PATCH v2 17/23] apalis_imx6: pf0100: reorder and cleanup message printing
Marcel Ziswiler
- [U-Boot] [PATCH v2 18/23] apalis_imx6: disable ri and dcd irq in uarts
Marcel Ziswiler
- [U-Boot] [PATCH v2 19/23] apalis_imx6: revert fuse value set in mfgr_fuse
Marcel Ziswiler
- [U-Boot] [PATCH v2 20/23] configs: apalis_imx6: Use ext4 file system by default
Marcel Ziswiler
- [U-Boot] [PATCH v2 21/23] apalis_imx6: use SDP if USB serial downloader has been used
Marcel Ziswiler
- [U-Boot] [PATCH v2 22/23] apalis_imx6: switch to zimage
Marcel Ziswiler
- [U-Boot] [PATCH v2 23/23] board: apalis_imx6: check for and report ecc errors in fuses
Marcel Ziswiler
- [U-Boot] [PATCH v1 00/26] colibri imx6 fixes, device tree enablement and driver model conversion
Marcel Ziswiler
- [U-Boot] [PATCH v1 01/26] colibri_imx6: get rid of obsolete nospl configurations
Marcel Ziswiler
- [U-Boot] [PATCH v1 02/26] colibri_imx6: use distro defaults
Marcel Ziswiler
- [U-Boot] [PATCH v1 03/26] colibri_imx6: move console in env from header file to defconfig
Marcel Ziswiler
- [U-Boot] [PATCH v1 04/26] colibri_imx6: enable fit image, gpt, imx thermal, efi loader support
Marcel Ziswiler
- [U-Boot] [PATCH v1 05/26] colibri_imx6: remove obsolete USB_GADGET_MASS_STORAGE configuration
Marcel Ziswiler
- [U-Boot] [PATCH v1 06/26] colibri_imx6: migrate to using device tree
Marcel Ziswiler
- [U-Boot] [PATCH v1 07/26] colibri_imx6: clean-up and migrate gpios to using driver model
Marcel Ziswiler
- [U-Boot] [PATCH v1 08/26] colibri_imx6: enable pin control driver
Marcel Ziswiler
- [U-Boot] [PATCH v1 09/26] colibri_imx6: migrate i2c to using driver model
Marcel Ziswiler
- [U-Boot] [PATCH v1 10/26] colibri_imx6: migrate pmic and regulator to using driver model
Marcel Ziswiler
- [U-Boot] [PATCH v1 11/26] colibri_imx6: migrate mmc to using driver model
Marcel Ziswiler
- [U-Boot] [PATCH v1 12/26] colibri_imx6: migrate usb to using driver model
Marcel Ziswiler
- [U-Boot] [PATCH v1 13/26] colibri_imx6: drop CONFIG_OF_SYSTEM_SETUP
Marcel Ziswiler
- [U-Boot] [PATCH v1 14/26] colibri_imx6: print also 64-bit IT
Marcel Ziswiler
- [U-Boot] [PATCH v1 15/26] colibri_imx6: add distroboot support
Marcel Ziswiler
- [U-Boot] [PATCH v1 16/26] colibri_imx6: unify sd/mmc drive strenght with linux kernel settings
Marcel Ziswiler
- [U-Boot] [PATCH v1 17/26] colibri imx6: pf0100: reorder and cleanup message printing
Marcel Ziswiler
- [U-Boot] [PATCH v1 18/26] colibri imx6: disable ri and dcd irq in uarts
Marcel Ziswiler
- [U-Boot] [PATCH v1 19/26] colibri_imx6: change pmic fusing according to hw 1.1 requirements
Marcel Ziswiler
- [U-Boot] [PATCH v1 20/26] colibri_imx6: revert fuse value set in mfgr_fuse
Marcel Ziswiler
- [U-Boot] [PATCH v1 21/26] toradex: colibri_imx6: overwrite CMA memory set in device tree
Marcel Ziswiler
- [U-Boot] [PATCH v1 22/26] configs: colibri_imx6: Use ext4 file system by default
Marcel Ziswiler
- [U-Boot] [PATCH v1 23/26] colibri_imx6: use SDP if USB serial downloader has been used
Marcel Ziswiler
- [U-Boot] [PATCH v1 24/26] colibri_imx6: switch to zimage
Marcel Ziswiler
- [U-Boot] [PATCH v1 25/26] colibri_imx6: added nreset gpio on reboot
Marcel Ziswiler
- [U-Boot] [PATCH v1 26/26] board: colibri_imx6: check for and report ecc errors in fuses
Marcel Ziswiler
- [U-Boot] [PATCH v1 24/26] colibri_imx6: switch to zimage
Marcel Ziswiler
- [U-Boot] [PATCH v3 03/22] vybrid: ddr: Extend vf610-pinfunc.h with DDR pads definitions
Marcel Ziswiler
- [U-Boot] [PATCH v3 01/22] net: FEC: Add compatible for vybrid (vf610) to reuse fec_mxc.c driver
Marcel Ziswiler
- [U-Boot] [PATCH v3 04/22] vybrid: clock: Provide enable_i2c_clk() function for Vybrid
Marcel Ziswiler
- [U-Boot] [PATCH v3 05/22] pcm052: board: Do not enable I2C2 code in the board file
Marcel Ziswiler
- [U-Boot] [PATCH v3 09/22] ARM: DTS: vybrid: Update vf.dtsi file to descibe more vf610 hardware
Marcel Ziswiler
- [U-Boot] [PATCH v3 14/22] config: pcm052: Use SZ_X{MK} from linux/sizes.h for include/configs/pcm052.h
Marcel Ziswiler
- [U-Boot] [REGRESSION] tegra124: nyan-big: LPAE not working
Marcel Ziswiler
- [U-Boot] [PATCH v3 07/22] pcm052: board: Remove "m4go" command as it is superseded by "bootaux"
Marcel Ziswiler
- [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion
Marcel Ziswiler
- [U-Boot] [PATCH v1 01/22] add missing space in comment
Marcel Ziswiler
- [U-Boot] [PATCH v1 02/22] vf610: ddrmc: add missing include
Marcel Ziswiler
- [U-Boot] [PATCH v1 03/22] imx: bootaux: add dependency on vf610
Marcel Ziswiler
- [U-Boot] [PATCH v1 04/22] configs: move CONFIG_USB_EHCI_VF to Kconfig
Marcel Ziswiler
- [U-Boot] [PATCH v1 05/22] configs: colibri_vf: remove obsolete mmc/sd card environment
Marcel Ziswiler
- [U-Boot] [PATCH v1 06/22] configs: colibri_vf: limit size of malloc() pool before relocation
Marcel Ziswiler
- [U-Boot] [PATCH v1 07/22] configs: move CONFIG_MXC_OCOTP to Kconfig
Marcel Ziswiler
- [U-Boot] [PATCH v1 08/22] ARM: dts: colibri_vf: update device trees
Marcel Ziswiler
- [U-Boot] [PATCH v1 09/22] configs: colibri_vf: disable obscure options
Marcel Ziswiler
- [U-Boot] [PATCH v1 10/22] colibri_vf: migrate pinctrl and regulators to dtb/dm
Marcel Ziswiler
- [U-Boot] [PATCH v1 11/22] colibri_vf: migrate fec, esdhc, nfc and usb to driver model
Marcel Ziswiler
- [U-Boot] [PATCH v1 12/22] config: colibri_vf: use macros from linux/sizes.h
Marcel Ziswiler
- [U-Boot] [PATCH v1 13/22] colibri_vf: add distroboot support
Marcel Ziswiler
- [U-Boot] [PATCH v1 14/22] colibri_vf: set fdtfile for distroboot
Marcel Ziswiler
- [U-Boot] [PATCH v1 15/22] colibri_vf: sync the board info message
Marcel Ziswiler
- [U-Boot] [PATCH v1 16/22] colibri_vf: enable user debug by default
Marcel Ziswiler
- [U-Boot] [PATCH v1 17/22] colibri_vf: disable undefined instruction events in user debug
Marcel Ziswiler
- [U-Boot] [PATCH v1 18/22] config: colibri_vf: enable mtd partitions via dt
Marcel Ziswiler
- [U-Boot] [PATCH v1 19/22] arm: vf610: add uart2 clock/pinmux support
Marcel Ziswiler
- [U-Boot] [PATCH v1 20/22] colibri_vf: adjust timing according to data sheet
Marcel Ziswiler
- [U-Boot] [PATCH v1 21/22] colibri_vf: use leveling evaluated by DDR validation tools
Marcel Ziswiler
- [U-Boot] [PATCH v1 22/22] colibri_vf: fix sdboot for vybrid modules
Marcel Ziswiler
- [U-Boot] IMX6 DM_USB / DM_MMC requires OF_CONTROL?
Marcel Ziswiler
- [U-Boot] SPL_FIT_SIGNATURE on am3358
Douglas Zobel
- [U-Boot] Extract RSA Keys from image
Douglas Zobel
- [U-Boot] SDCRARD boot on Intel Arria10 SOCDK
Marcel Gielen [Celestia-STS]
- [U-Boot] Pull request: u-boot-riscv/master
uboot at andestech.com
- [U-Boot] pre-reloc fdt scan for non-top-level nodes
viktor babrian
- [U-Boot] pre-reloc fdt scan for non-top-level nodes
viktor babrian
- [U-Boot] Extract RSA Keys from image
Jeridiah.Welti at bench.com
- [U-Boot] MTD: nand: mxs_nand: Allow driver to auto setup ECC in SPL
sbabic at denx.de
- [U-Boot] [U-Boot, 01/14] imx: ventana: mv88e61xx change LED configuration
sbabic at denx.de
- [U-Boot] [U-Boot,v4,18/20] board: mx6sabresd: Remove non-DM code
sbabic at denx.de
- [U-Boot] [U-Boot, v1, 3/3] imx: cpu.c: give access to reset cause in spl
sbabic at denx.de
- [U-Boot] [U-Boot, v4, 17/20] board: mx6sabreauto: Remove the non-DM code
sbabic at denx.de
- [U-Boot] [U-Boot,10/14] imx: ventana: add support for GW5908
sbabic at denx.de
- [U-Boot] [U-Boot, v4, 07/20] board: mx6sabresd: Add board_fit_config_name_match to support FIT in SPL
sbabic at denx.de
- [U-Boot] [U-Boot, 06/14] imx: ventana: skip nand init for nandless boards
sbabic at denx.de
- [U-Boot] [U-Boot, 05/14] imx: ventana: add support for Z101WX01 LVDS display
sbabic at denx.de
- [U-Boot] [U-Boot, 14/14] imx: ventana: fix usage of dt paths with leading 0s (Linux 4.15+)
sbabic at denx.de
- [U-Boot] MTD: mxs_nand: Fix BCH read timeout error on boards requiring ECC
sbabic at denx.de
- [U-Boot] [U-Boot, 3/6] doc: imx: habv4: Add Secure Boot guide for i.MX6 and i.MX7 non-SPL targets
sbabic at denx.de
- [U-Boot] [U-Boot, v4, 15/20] configs: mx6sabreauto: Add DM_SPI_FLASH necessary configs
sbabic at denx.de
- [U-Boot] [U-Boot, v1, 1/3] ARM: dts: i.MX6Q, i.MX6QDL: fix address/size-cells warnings
sbabic at denx.de
- [U-Boot] [U-Boot, v4, 05/20] configs: imx6sabreauto: Add DM_USB support
sbabic at denx.de
- [U-Boot] [U-Boot, 07/14] imx: ventana: add i2c detect for all LVDS displays
sbabic at denx.de
- [U-Boot] [U-Boot, v4, 06/20] mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds
sbabic at denx.de
- [U-Boot] [U-Boot, v4, 09/20] arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files
sbabic at denx.de
- [U-Boot] [U-Boot, 4/6] doc: imx: habv4: Add Secure Boot guide for i.MX6 and i.MX7 SPL targets
sbabic at denx.de
- [U-Boot] [U-Boot,08/14] imx: ventana: add support for GW5906
sbabic at denx.de
- [U-Boot] [U-Boot, v4, 12/20] configs: mx6sabresd: Add SPL FIT and DM support
sbabic at denx.de
- [U-Boot] [U-Boot, v4, 04/20] configs: imx6sabreauto: Add DM_MMC support
sbabic at denx.de
- [U-Boot] [U-Boot,2/6] doc: imx: habv4: Add HABv4 introduction
sbabic at denx.de
- [U-Boot] [U-Boot, v4, 01/20] common: spl_fit: Fix the spl_fit_image_get_os for FIT_IMAGE_TINY
sbabic at denx.de
- [U-Boot] [U-Boot, v4, 16/20] configs: mx6sabresd: Add DM_SPI_FLASH necessary configs
sbabic at denx.de
- [U-Boot] [U-Boot, 1/6] doc: imx: habv4: Remove extra hab directory for a cleaner documentation structure
sbabic at denx.de
- [U-Boot] ARM: imx6q_logic: Enable SPL Booting from NAND
sbabic at denx.de
- [U-Boot] MTD: NAND: mxs_nand_init_dma: Make mxs_nand_init_dma static
sbabic at denx.de
- [U-Boot] [U-Boot, v4, 19/20] board: mx6sabresd: Remove the enet reset gpio handling
sbabic at denx.de
- [U-Boot] [U-Boot, RESEND, 1/3] ARM: dts: imx6ul-lite*: add DTS files for liteSOM and liteboard
sbabic at denx.de
- [U-Boot] [U-Boot, v4, 03/20] usb: ehci-mx6: Make regulator DM_REGULATOR dependent
sbabic at denx.de
- [U-Boot] [U-Boot, 03/14] imx: ventana: remove setup of I2C3 from SPL
sbabic at denx.de
- [U-Boot] [U-Boot, v4, 20/20] configs: mx6sabresd: Reduce SPL size by disabling DOS, EXT and EFI support
sbabic at denx.de
- [U-Boot] [U-Boot,02/14] imx: ventana: do not iomux UART1
sbabic at denx.de
- [U-Boot] [U-Boot,v4,13/20] mx6sabreauto: Add DM_GPIO support
sbabic at denx.de
- [U-Boot] net: mv88e61xx: fix autonegotiation on ports
sbabic at denx.de
- [U-Boot] [U-Boot, 12/14] imx: ventana: add support for GW5901/GW5902
sbabic at denx.de
- [U-Boot] [U-Boot, v4, 08/20] board: mx6sabreauto: Add board_fit_config_name_match to support FIT in SPL
sbabic at denx.de
- [U-Boot] [U-Boot, v4, 10/20] arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd]
sbabic at denx.de
- [U-Boot] [U-Boot,11/14] imx: ventana: add support for GW5909
sbabic at denx.de
- [U-Boot] [U-Boot,04/14] imx: ventana: add support for GW5905
sbabic at denx.de
- [U-Boot] [U-Boot, v4, 11/20] configs: mx6sabreauto: Add SPL FIT and DM support
sbabic at denx.de
- [U-Boot] [U-Boot, 13/14] imx: ventana: gw5904/gw5909: disable RS485
sbabic at denx.de
- [U-Boot] net: dm: fec: Fix regulator enable when using DM_REGULATOR
sbabic at denx.de
- [U-Boot] ARM: imx6q_logic: Correct phy fixup for broken ethernet
sbabic at denx.de
- [U-Boot] [U-Boot, v2, 2/3] ddr: vybrid: Provide code to perform on-boot calibration
sbabic at denx.de
- [U-Boot] [U-Boot,v4,14/20] mx6sabresd: Add DM_GPIO support
sbabic at denx.de
- [U-Boot] [U-Boot,5/6] doc: imx: habv4: Move encrypted boot guide
sbabic at denx.de
- [U-Boot] [U-Boot, v1, 2/3] imx: serial_mxc: disable ri and dcd irq in dte mode
sbabic at denx.de
- [U-Boot] [U-Boot, v2, 3/3] ddr: vybrid: Add calibration code to memory controler's (DDRMC) setup code
sbabic at denx.de
- [U-Boot] [U-Boot,09/14] imx: ventana: add support for GW5907
sbabic at denx.de
- [U-Boot] [U-Boot, v2, 1/3] ddr: vybrid: Add DDRMC calibration related registers (DQS to DQ)
sbabic at denx.de
- [U-Boot] [U-Boot, v4, 02/20] usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE
sbabic at denx.de
- [U-Boot] [PATCH v1 0/2] Allow platform specific service handling on PSCI
chee.hong.ang at intel.com
- [U-Boot] [PATCH v1 1/2] ARMv8: Allow SiP service extensions on top of PSCI code
chee.hong.ang at intel.com
- [U-Boot] [PATCH v1 2/2] ARMv8: Disable fwcall when PSCI is enabled
chee.hong.ang at intel.com
- [U-Boot] [PATCH v1] ARM: socfpga: stratix10: Return valid error code from FPGA driver
chee.hong.ang at intel.com
- [U-Boot] [PATCH v1] mmc: dwmmc: Enable small delay before returning error
chee.hong.ang at intel.com
- [U-Boot] [PATCH v3 1/2] fs: fat: dynamically allocate memory for temporary buffer
tien.fong.chee at intel.com
- [U-Boot] [PATCH v3 2/2] fs: fat: Reduce default max clustersize 64KiB from malloc pool
tien.fong.chee at intel.com
- [U-Boot] [PATCH] fpga: Add support for getting external data address and length
tien.fong.chee at intel.com
- [U-Boot] [PATCH] cmd: ximg.c: Add support for getting external data address and length
tien.fong.chee at intel.com
- [U-Boot] [PATCH] fit: Add support for printing more than one FPGA node name
tien.fong.chee at intel.com
- [U-Boot] [PATCH v8 0/8] Add support for loading FPGA bitstream
tien.fong.chee at intel.com
- [U-Boot] [PATCH v8 1/8] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
tien.fong.chee at intel.com
- [U-Boot] [PATCH v8 2/8] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
tien.fong.chee at intel.com
- [U-Boot] [PATCH v8 3/8] fit: Add function declarations to the header file
tien.fong.chee at intel.com
- [U-Boot] [PATCH v8 4/8] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
tien.fong.chee at intel.com
- [U-Boot] [PATCH v8 5/8] ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK
tien.fong.chee at intel.com
- [U-Boot] [PATCH v8 6/8] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs
tien.fong.chee at intel.com
- [U-Boot] [PATCH v8 7/8] ARM: socfpga: Synchronize the configuration for A10 SoCDK
tien.fong.chee at intel.com
- [U-Boot] [PATCH v8 8/8] ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL
tien.fong.chee at intel.com
- [U-Boot] [PATCH] misc: fs_loader: Replace label with DT phandle
tien.fong.chee at intel.com
- [U-Boot] [PATCH] fpga: Replace char * with const char * for filename
tien.fong.chee at intel.com
- [U-Boot] [PATCH v9 0/7] Add support for loading FPGA bitstream
tien.fong.chee at intel.com
- [U-Boot] [PATCH v9 1/7] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
tien.fong.chee at intel.com
- [U-Boot] [PATCH v9 2/7] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK
tien.fong.chee at intel.com
- [U-Boot] [PATCH v9 3/7] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
tien.fong.chee at intel.com
- [U-Boot] [PATCH v9 4/7] ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK
tien.fong.chee at intel.com
- [U-Boot] [PATCH v9 5/7] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs
tien.fong.chee at intel.com
- [U-Boot] [PATCH v9 6/7] ARM: socfpga: Synchronize the configuration for A10 SoCDK
tien.fong.chee at intel.com
- [U-Boot] [PATCH v9 7/7] ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL
tien.fong.chee at intel.com
- [U-Boot] [BUG] ls1012afrwy: U-Boot no detect sd card
jorisoffouga
- [U-Boot] U-Boot port for esp32
kbenvin
- [U-Boot] [PATCH] efi_loader: Fix serial console size detection
matthias.bgg at kernel.org
- [U-Boot] [RFC] drivers: serial: Check only input buffers in pending
matthias.bgg at kernel.org
- [U-Boot] [PATCH 0/4] Random small sunxi fixes
megous at megous.com
- [U-Boot] [PATCH 1/4] sunxi: Fix build when CONFIG_CMD_NET is disabled
megous at megous.com
- [U-Boot] [PATCH 2/4] sunxi: Fix build when CONFIG_CMD_PXE or CONFIG_CMD_DHCP are disabled
megous at megous.com
- [U-Boot] [PATCH 3/4] lib: decode_timing_property should return -NOENT when proprty is not found
megous at megous.com
- [U-Boot] [PATCH 4/4] power: axp818: Fix typo in axp_set_dldo
megous at megous.com
- [U-Boot] [PATCH v2] sunxi: Fix build when CONFIG_CMD_PXE or CONFIG_CMD_DHCP are disabled
megous at megous.com
- [U-Boot] [PATCH v2] lib: decode_timing_property should return -NOENT when proprty is not found
megous at megous.com
- [U-Boot] [PATCH v2] power: axp818: Fix typo in axp_set_dldo
megous at megous.com
- [U-Boot] [PATCH] MAINTAINERS: update u-boot-atmel tree
Eugen.Hristev at microchip.com
- [U-Boot] [PATCH 2/2] configs: sama5d27_som1_ek: Activate misc init for uSD variant
Eugen.Hristev at microchip.com
- [U-Boot] [PATCH] configs: at91: remove SPL_GENERATE_ATMEL_PMECC_HEADER from non-nand configs
Eugen.Hristev at microchip.com
- [U-Boot] [PATCH] ARM: at91: Apply PMECC header for NAND_BOOT only
Eugen.Hristev at microchip.com
- [U-Boot] [PATCH] configs: at91: remove SPL_GENERATE_ATMEL_PMECC_HEADER from non-nand configs
Eugen.Hristev at microchip.com
- [U-Boot] [PATCH v2 3/4] ARM: atmel: at91sam9x5ek: enable spl support
Eugen.Hristev at microchip.com
- [U-Boot] [PATCH v2 3/4] ARM: atmel: at91sam9x5ek: enable spl support
Eugen.Hristev at microchip.com
- [U-Boot] [PATCH] spi: designware: Change include order
Horatiu.Vultur at microchip.com
- [U-Boot] [PATCH] MAINTAINERS: update u-boot-atmel tree
Nicolas.Ferre at microchip.com
- [U-Boot] [PATCH v2 1/3] fsl_sec: fix register layout on Layerscape architectures
laurentiu.tudor at nxp.com
- [U-Boot] [PATCH v2 2/3] armv8: fsl-layerscape: fix SEC QI ICID setup
laurentiu.tudor at nxp.com
- [U-Boot] [PATCH v2 3/3] armv8: fsl-layerscape: avoid DT fixup warning
laurentiu.tudor at nxp.com
- [U-Boot] [U-Boot, 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now
andy.yan at rock-chips.com
- [U-Boot] Kernel hang when replace older uboot with uboot master
rosysong at rosinson.com
- [U-Boot] Kernel hang when replace older uboot with uboot master V2
rosysong at rosinson.com
- [U-Boot] Kernel hang when replace older uboot with uboot master V2
rosysong at rosinson.com
- [U-Boot] Kernel hang when replace older uboot with uboot master V2
rosysong at rosinson.com
- [U-Boot] Kernel hang when replace older uboot with uboot master V2
rosysong at rosinson.com
- [U-Boot] [PATCH] rockchip: rk3399-puma: support Gigadevice SPI-NOR flash
klaus.goger at theobroma-systems.com
Last message date:
Thu Feb 28 23:59:12 UTC 2019
Archived on: Fri Mar 1 00:01:09 UTC 2019
This archive was generated by
Pipermail 0.09 (Mailman edition).