[U-Boot] [PATCH v3 0/5] spi-flash: switch to "jedec, spi-nor" binding

[Neil Armstrong]

Le 07/02/2019 13:28, Jagan Teki a écrit :
> On Tue, Jan 15, 2019 at 6:29 PM Neil Armstrong <narmstrong at baylibre.com> wrote:
>>
>> There is no reason not to use the Linux "jedec,spi-nor" binding in u-boot.
>> This patchset :
>> - adds this compatible into sf_probe and will avoid changing the
>>   device tree files to add a u-boot specific compatible to probe a spi flash.
>> - switches all DTS/DTSI files to "jedec,spi-nor"
>> - remove the "spi-flash" compatible from sf-probe
>> - switch GENERIC_SPI_FLASH to jedec,spi-nor in fdtdec
>> - switches dt bindings examples files to "jedec,spi-nor"
>>
>> Changes since v2:
>> - collected tags
>> - extracted x86 dts changed and merged it with the fdtdec change
>> - updated for new boards
>>
>> Neil Armstrong (5):
>>   mtd: sf_probe: add jedec,spi-nor compatible
>>   dts: switch spi-flash to jedec,spi-nor compatible
>>   x86: dts: switch spi-flash to jedec,spi-nor compatible
>>   mtd: sf_probe: remove spi-flash compatible
>>   doc: device-tree-bindings: switch from spi-flash to jedec,spi-nor
> 
> Reviewed-by: Jagan Teki <jagan at openedev.com>
> 
> Please send v4 on top of u-boot-spi/master and skip the 1/5 (picked
> this from Vignesh series)
> 

OK, will re-spin.

Neil