[U-Boot] [PATCH v2 0/3] Add Ethernet support for Poplar board
Shawn Guo
shawn.guo at linaro.org
Mon Feb 18 03:37:39 UTC 2019
The series adds Ethernet support for Poplar board. It firstly creates
a reset driver for HiSilicon platform, then introduces higmacv300
Ethernet driver, and finally enables Ethernet support for Poplar board.
Changes for v2:
- Rename driver symbol to HIGMACV300_ETH.
- Remove the use of temp variable 'addr' in higmac_recv().
- Simplify the return of function higmac_ofdata_to_platdata() and
higmac_probe().
- Combine delaration and initialization for phyintf in function
higmac_ofdata_to_platdata().
- Eliminate the MDIO read/write macros.
- Use wait_for_bit_le32() for MDIO command completion polling.
- Set up RX packet buffers in RX_FQ descriptor at initialization time,
so that we do not need to allocate/free packet buffers repeatedly.
- Inform GMAC that the RX descriptor is no longer in use in function
higmac_free_pkt().
- Define BITS_DESC_ENA instead of using magic number 0xf.
Shawn Guo (3):
reset: add reset driver for HiSilicon platform
net: add higmacv300 Ethernet driver for HiSilicon platform
poplar: enable Ethernet driver support
arch/arm/dts/hi3798cv200-u-boot.dtsi | 6 +
configs/poplar_defconfig | 3 +
drivers/net/Kconfig | 9 +
drivers/net/Makefile | 1 +
drivers/net/higmacv300.c | 597 +++++++++++++++++++++++++++
drivers/reset/Kconfig | 6 +
drivers/reset/Makefile | 1 +
drivers/reset/reset-hisilicon.c | 95 +++++
8 files changed, 718 insertions(+)
create mode 100644 drivers/net/higmacv300.c
create mode 100644 drivers/reset/reset-hisilicon.c
--
2.18.0
More information about the U-Boot
mailing list