[U-Boot] [PATCH v1 17/26] colibri imx6: pf0100: reorder and cleanup message printing
Marcel Ziswiler
marcel at ziswiler.com
Fri Feb 8 17:42:20 UTC 2019
From: Max Krummenacher <max.krummenacher at toradex.com>
Keep debug code at the end of the function.
Use a one line informational message for the PMIC only.
Signed-off-by: Max Krummenacher <max.krummenacher at toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
---
board/toradex/colibri_imx6/pf0100.c | 82 ++++++++++++++---------------
1 file changed, 41 insertions(+), 41 deletions(-)
diff --git a/board/toradex/colibri_imx6/pf0100.c b/board/toradex/colibri_imx6/pf0100.c
index 5e411f1743..09c3cc950a 100644
--- a/board/toradex/colibri_imx6/pf0100.c
+++ b/board/toradex/colibri_imx6/pf0100.c
@@ -35,7 +35,7 @@ unsigned pmic_init(void)
uchar bus = 1;
uchar devid, revid, val;
- puts("PMIC: ");
+ puts("PMIC: ");
rc = i2c_get_chip_for_busnum(bus, PFUZE100_I2C_ADDR, 1, &dev);
if (rc) {
printf("failed to get device for PMIC at address 0x%x\n",
@@ -51,7 +51,46 @@ unsigned pmic_init(void)
puts("i2c pmic revid read failed\n");
return 0;
}
- printf("device id: 0x%.2x, revision id: 0x%.2x\n", devid, revid);
+ printf("device id: 0x%.2x, revision id: 0x%.2x, ", devid, revid);
+
+ /* get device programmed state */
+ val = PFUZE100_PAGE_REGISTER_PAGE1;
+ if (dm_i2c_write(dev, PFUZE100_PAGE_REGISTER, &val, 1)) {
+ puts("i2c write failed\n");
+ return 0;
+ }
+ if (dm_i2c_read(dev, PFUZE100_FUSE_POR1, &val, 1) < 0) {
+ puts("i2c fuse_por read failed\n");
+ return 0;
+ }
+ if (val & PFUZE100_FUSE_POR_M)
+ programmed++;
+
+ if (dm_i2c_read(dev, PFUZE100_FUSE_POR2, &val, 1) < 0) {
+ puts("i2c fuse_por read failed\n");
+ return programmed;
+ }
+ if (val & PFUZE100_FUSE_POR_M)
+ programmed++;
+
+ if (dm_i2c_read(dev, PFUZE100_FUSE_POR3, &val, 1) < 0) {
+ puts("i2c fuse_por read failed\n");
+ return programmed;
+ }
+ if (val & PFUZE100_FUSE_POR_M)
+ programmed++;
+
+ switch (programmed) {
+ case 0:
+ puts("not programmed\n");
+ break;
+ case 3:
+ puts("programmed\n");
+ break;
+ default:
+ puts("undefined programming state\n");
+ break;
+ }
#ifdef DEBUG
{
@@ -103,45 +142,6 @@ unsigned pmic_init(void)
}
#endif /* DEBUG */
- /* get device programmed state */
- val = PFUZE100_PAGE_REGISTER_PAGE1;
- if (dm_i2c_write(dev, PFUZE100_PAGE_REGISTER, &val, 1)) {
- puts("i2c write failed\n");
- return 0;
- }
- if (dm_i2c_read(dev, PFUZE100_FUSE_POR1, &val, 1) < 0) {
- puts("i2c fuse_por read failed\n");
- return 0;
- }
- if (val & PFUZE100_FUSE_POR_M)
- programmed++;
-
- if (dm_i2c_read(dev, PFUZE100_FUSE_POR2, &val, 1) < 0) {
- puts("i2c fuse_por read failed\n");
- return programmed;
- }
- if (val & PFUZE100_FUSE_POR_M)
- programmed++;
-
- if (dm_i2c_read(dev, PFUZE100_FUSE_POR3, &val, 1) < 0) {
- puts("i2c fuse_por read failed\n");
- return programmed;
- }
- if (val & PFUZE100_FUSE_POR_M)
- programmed++;
-
- switch (programmed) {
- case 0:
- printf("PMIC: not programmed\n");
- break;
- case 3:
- printf("PMIC: programmed\n");
- break;
- default:
- printf("PMIC: undefined programming state\n");
- break;
- }
-
return programmed;
}
--
2.20.1
More information about the U-Boot
mailing list