[U-Boot] [RFT 6/8] power: regulator: s2mps11: Add enable delay

[Lukasz Majewski]

Hi Krzysztof,

> According to datasheet, the output on LDO regulators will start
> appearing after 10-15 us.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>
> ---
>  drivers/power/regulator/s2mps11_regulator.c | 9 ++++++++-
>  1 file changed, 8 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/power/regulator/s2mps11_regulator.c
> b/drivers/power/regulator/s2mps11_regulator.c index
> 723d27f67c9a..1f1581852ee2 100644 ---
> a/drivers/power/regulator/s2mps11_regulator.c +++
> b/drivers/power/regulator/s2mps11_regulator.c @@ -551,7 +551,14 @@
> static int ldo_get_enable(struct udevice *dev) 
>  static int ldo_set_enable(struct udevice *dev, bool enable)
>  {
> -	return s2mps11_ldo_enable(dev, PMIC_OP_SET, &enable);
> +	int ret;
> +
> +	ret = s2mps11_ldo_enable(dev, PMIC_OP_SET, &enable);
> +
> +	/* Wait the "enable delay" for voltage to start to rise */
> +	udelay(15);

I assume, that this value is the same as in the Linux driver?

> +
> +	return ret;
>  }
>  
>  static int ldo_get_mode(struct udevice *dev)




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190211/6dfd218b/attachment.sig>