[U-Boot] [PATCH v4 13/20] mx6sabreauto: Add DM_GPIO support

[Abel Vesa]

Add the DM_GPIO related config for mx6sabreauto.
Also add the gpio request calls.

Signed-off-by: Abel Vesa <abel.vesa at nxp.com>
Reviewed-by: Peng Fan <peng.fan at nxp.com>
---
 board/freescale/mx6sabreauto/mx6sabreauto.c | 3 +++
 configs/mx6sabreauto_defconfig              | 1 +
 2 files changed, 4 insertions(+)

diff --git a/board/freescale/mx6sabreauto/mx6sabreauto.c b/board/freescale/mx6sabreauto/mx6sabreauto.c
index c8f1263..c7e3e67 100644
--- a/board/freescale/mx6sabreauto/mx6sabreauto.c
+++ b/board/freescale/mx6sabreauto/mx6sabreauto.c
@@ -501,6 +501,7 @@ iomux_v3_cfg_t const backlight_pads[] = {
 
 static void setup_iomux_backlight(void)
 {
+	gpio_request(IMX_GPIO_NR(2, 9), "backlight");
 	gpio_direction_output(IMX_GPIO_NR(2, 9), 1);
 	SETUP_IOMUX_PADS(backlight_pads);
 }
@@ -594,6 +595,7 @@ int board_init(void)
 	else
 		setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info1);
 	/* I2C 3 Steer */
+	gpio_request(IMX_GPIO_NR(5, 4), "steer logic");
 	gpio_direction_output(IMX_GPIO_NR(5, 4), 1);
 	SETUP_IOMUX_PADS(i2c3_pads);
 #ifndef CONFIG_SYS_FLASH_CFI
@@ -602,6 +604,7 @@ int board_init(void)
 	else
 		setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info2);
 #endif
+	gpio_request(IMX_GPIO_NR(1, 15), "expander en");
 	gpio_direction_output(IMX_GPIO_NR(1, 15), 1);
 	SETUP_IOMUX_PADS(port_exp);
 
diff --git a/configs/mx6sabreauto_defconfig b/configs/mx6sabreauto_defconfig
index c3843ec..3b37766 100644
--- a/configs/mx6sabreauto_defconfig
+++ b/configs/mx6sabreauto_defconfig
@@ -57,6 +57,7 @@ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_SPL_DM=y
 CONFIG_DFU_MMC=y
 CONFIG_DFU_SF=y
+CONFIG_DM_GPIO=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_NAND=y
-- 
2.7.4