[U-Boot] [PATCH v2 31/34] x86: sound: Add support for broadwell I2S
Simon Glass
sjg at chromium.org
Sun Feb 17 03:25:04 UTC 2019
I2S is used to send digital audio data to an audio codec. Add support for
this on broadwell.
Signed-off-by: Simon Glass <sjg at chromium.org>
Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
---
Changes in v2: None
drivers/sound/Makefile | 1 +
drivers/sound/broadwell_i2s.c | 306 ++++++++++++++++++++++++++++++++++
drivers/sound/broadwell_i2s.h | 301 +++++++++++++++++++++++++++++++++
3 files changed, 608 insertions(+)
create mode 100644 drivers/sound/broadwell_i2s.c
create mode 100644 drivers/sound/broadwell_i2s.h
diff --git a/drivers/sound/Makefile b/drivers/sound/Makefile
index 2a6fd7420c2..07b590156c9 100644
--- a/drivers/sound/Makefile
+++ b/drivers/sound/Makefile
@@ -17,4 +17,5 @@ obj-$(CONFIG_SOUND_MAX98090) += max98090.o maxim_codec.o
obj-$(CONFIG_SOUND_MAX98095) += max98095.o maxim_codec.o
obj-$(CONFIG_SOUND_INTEL_HDA) += hda_codec.o
obj-$(CONFIG_SOUND_I8254) += i8254_beep.o
+obj-$(CONFIG_INTEL_BROADWELL) += broadwell_i2s.o
obj-$(CONFIG_SOUND_IVYBRIDGE) += ivybridge_sound.o
diff --git a/drivers/sound/broadwell_i2s.c b/drivers/sound/broadwell_i2s.c
new file mode 100644
index 00000000000..998792b2399
--- /dev/null
+++ b/drivers/sound/broadwell_i2s.c
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Intel Broadwell I2S driver
+ *
+ * Copyright 2019 Google LLC
+ *
+ * Modified from dc i2s/broadwell/broadwell.c
+ */
+
+#define LOG_CATEGORY UCLASS_I2S
+
+#include <common.h>
+#include <dm.h>
+#include <i2s.h>
+#include <asm/io.h>
+#include "broadwell_i2s.h"
+
+enum {
+ BDW_SHIM_START_ADDRESS = 0xfb000,
+ BDW_SSP0_START_ADDRESS = 0xfc000,
+ BDW_SSP1_START_ADDRESS = 0xfd000,
+};
+
+struct broadwell_i2s_priv {
+ enum frame_sync_rel_timing_t rel_timing;
+ enum frame_sync_pol_t sfrm_polarity;
+ enum end_transfer_state_t end_transfer_state;
+ enum clock_mode_t sclk_mode;
+ uint sclk_dummy_stop; /* 0-31 */
+ uint sclk_frame_width; /* 1-38 */
+ struct i2s_shim_regs *shim;
+ struct broadwell_i2s_regs *regs;
+};
+
+static void init_shim_csr(struct broadwell_i2s_priv *priv)
+{
+ /*
+ * Select SSP clock
+ * Turn off low power clock
+ * Set PIO mode
+ * Stall DSP core
+ */
+ clrsetbits_le32(&priv->shim->csr,
+ SHIM_CS_S0IOCS | SHIM_CS_LPCS | SHIM_CS_DCS_MASK,
+ SHIM_CS_S1IOCS | SHIM_CS_SBCS_SSP1_24MHZ |
+ SHIM_CS_SBCS_SSP0_24MHZ | SHIM_CS_SDPM_PIO_SSP1 |
+ SHIM_CS_SDPM_PIO_SSP0 | SHIM_CS_STALL |
+ SHIM_CS_DCS_DSP32_AF32);
+}
+
+static void init_shim_clkctl(struct i2s_uc_priv *uc_priv,
+ struct broadwell_i2s_priv *priv)
+{
+ u32 clkctl = readl(&priv->shim->clkctl);
+
+ /* Set 24Mhz mclk, prevent local clock gating, enable SSP0 clock */
+ clkctl &= SHIM_CLKCTL_RESERVED;
+ clkctl |= SHIM_CLKCTL_MCLK_24MHZ | SHIM_CLKCTL_DCPLCG;
+
+ /* Enable requested SSP interface */
+ if (uc_priv->id)
+ clkctl |= SHIM_CLKCTL_SCOE_SSP1 | SHIM_CLKCTL_SFLCGB_SSP1_CGD;
+ else
+ clkctl |= SHIM_CLKCTL_SCOE_SSP0 | SHIM_CLKCTL_SFLCGB_SSP0_CGD;
+
+ writel(clkctl, &priv->shim->clkctl);
+}
+
+static void init_sscr0(struct i2s_uc_priv *uc_priv,
+ struct broadwell_i2s_priv *priv)
+{
+ u32 sscr0;
+ uint scale;
+
+ /* Set data size based on BPS */
+ if (uc_priv->bitspersample > 16)
+ sscr0 = (uc_priv->bitspersample - 16 - 1) << SSP_SSC0_DSS_SHIFT
+ | SSP_SSC0_EDSS;
+ else
+ sscr0 = (uc_priv->bitspersample - 1) << SSP_SSC0_DSS_SHIFT;
+
+ /* Set network mode, Stereo PSP frame format */
+ sscr0 |= SSP_SSC0_MODE_NETWORK |
+ SSP_SSC0_FRDC_STEREO |
+ SSP_SSC0_FRF_PSP |
+ SSP_SSC0_TIM |
+ SSP_SSC0_RIM |
+ SSP_SSC0_ECS_PCH |
+ SSP_SSC0_NCS_PCH |
+ SSP_SSC0_ACS_PCH;
+
+ /* Scale 24MHz MCLK */
+ scale = uc_priv->audio_pll_clk / uc_priv->samplingrate / uc_priv->bfs;
+ sscr0 |= scale << SSP_SSC0_SCR_SHIFT;
+
+ writel(sscr0, &priv->regs->sscr0);
+}
+
+static void init_sscr1(struct broadwell_i2s_priv *priv)
+{
+ u32 sscr1 = readl(&priv->regs->sscr1);
+
+ sscr1 &= SSP_SSC1_RESERVED;
+
+ /* Set as I2S master */
+ sscr1 |= SSP_SSC1_SCLKDIR_MASTER | SSP_SSC1_SCLKDIR_MASTER;
+
+ /* Enable TXD tristate behavior for PCH */
+ sscr1 |= SSP_SSC1_TTELP | SSP_SSC1_TTE;
+
+ /* Disable DMA Tx/Rx service request */
+ sscr1 |= SSP_SSC1_TSRE | SSP_SSC1_RSRE;
+
+ /* Clock on during transfer */
+ sscr1 |= SSP_SSC1_SCFR;
+
+ /* Set FIFO thresholds */
+ sscr1 |= SSP_FIFO_SIZE << SSP_SSC1_RFT_SHIFT;
+ sscr1 |= SSP_FIFO_SIZE << SSP_SSC1_TFT_SHIFT;
+
+ /* Disable interrupts */
+ sscr1 &= ~(SSP_SSC1_EBCEI | SSP_SSC1_TINTE | SSP_SSC1_PINTE);
+ sscr1 &= ~(SSP_SSC1_LBM | SSP_SSC1_RWOT);
+
+ writel(sscr1, &priv->regs->sscr1);
+}
+
+static void init_sspsp(struct broadwell_i2s_priv *priv)
+{
+ u32 sspsp = readl(&priv->regs->sspsp);
+
+ sspsp &= SSP_PSP_RESERVED;
+ sspsp |= priv->sclk_mode << SSP_PSP_SCMODE_SHIFT;
+ sspsp |= (priv->sclk_dummy_stop << SSP_PSP_DMYSTOP_SHIFT) &
+ SSP_PSP_DMYSTOP_MASK;
+ sspsp |= (priv->sclk_dummy_stop >> 2 << SSP_PSP_EDYMSTOP_SHIFT) &
+ SSP_PSP_EDMYSTOP_MASK;
+ sspsp |= priv->sclk_frame_width << SSP_PSP_SFRMWDTH_SHIFT;
+
+ /* Frame Sync Relative Timing */
+ if (priv->rel_timing == NEXT_FRMS_AFTER_END_OF_T4)
+ sspsp |= SSP_PSP_FSRT;
+ else
+ sspsp &= ~SSP_PSP_FSRT;
+
+ /* Serial Frame Polarity */
+ if (priv->sfrm_polarity == SSP_FRMS_ACTIVE_HIGH)
+ sspsp |= SSP_PSP_SFRMP;
+ else
+ sspsp &= ~SSP_PSP_SFRMP;
+
+ /* End Data Transfer State */
+ if (priv->end_transfer_state == SSP_END_TRANSFER_STATE_LOW)
+ sspsp &= ~SSP_PSP_ETDS;
+ else
+ sspsp |= SSP_PSP_ETDS;
+
+ writel(sspsp, &priv->regs->sspsp);
+}
+
+static void init_ssp_time_slot(struct broadwell_i2s_priv *priv)
+{
+ writel(3, &priv->regs->sstsa);
+ writel(3, &priv->regs->ssrsa);
+}
+
+static int bdw_i2s_init(struct udevice *dev)
+{
+ struct i2s_uc_priv *uc_priv = dev_get_uclass_priv(dev);
+ struct broadwell_i2s_priv *priv = dev_get_priv(dev);
+
+ init_shim_csr(priv);
+ init_shim_clkctl(uc_priv, priv);
+ init_sscr0(uc_priv, priv);
+ init_sscr1(priv);
+ init_sspsp(priv);
+ init_ssp_time_slot(priv);
+
+ return 0;
+}
+
+static void bdw_i2s_enable(struct broadwell_i2s_priv *priv)
+{
+ setbits_le32(&priv->regs->sscr0, SSP_SSC0_SSE);
+ setbits_le32(&priv->regs->sstsa, SSP_SSTSA_EN);
+}
+
+static void bdw_i2s_disable(struct broadwell_i2s_priv *priv)
+{
+ clrbits_le32(&priv->regs->sstsa, SSP_SSTSA_EN);
+ clrbits_le32(&priv->regs->sstsa, SSP_SSTSA_EN);
+}
+
+static int broadwell_i2s_tx_data(struct udevice *dev, void *data,
+ uint data_size)
+{
+ struct broadwell_i2s_priv *priv = dev_get_priv(dev);
+ u32 *ptr = data;
+
+ log_debug("data=%p, data_size=%x\n", data, data_size);
+ if (data_size < SSP_FIFO_SIZE) {
+ log_err("Invalid I2S data size\n");
+ return -ENODATA;
+ }
+
+ /* Enable I2S interface */
+ bdw_i2s_enable(priv);
+
+ /* Transfer data */
+ while (data_size > 0) {
+ ulong start = timer_get_us() + 100000;
+
+ /* Write data if transmit FIFO has room */
+ if (readl(&priv->regs->sssr) & SSP_SSS_TNF) {
+ writel(*ptr++, &priv->regs->ssdr);
+ data_size -= sizeof(*ptr);
+ } else {
+ if ((long)(timer_get_us() - start) > 0) {
+ /* Disable I2S interface */
+ bdw_i2s_disable(priv);
+ log_debug("I2S Transfer Timeout\n");
+ return -ETIMEDOUT;
+ }
+ }
+ }
+
+ /* Disable I2S interface */
+ bdw_i2s_disable(priv);
+ log_debug("done\n");
+
+ return 0;
+}
+
+static int broadwell_i2s_probe(struct udevice *dev)
+{
+ struct i2s_uc_priv *uc_priv = dev_get_uclass_priv(dev);
+ struct broadwell_i2s_priv *priv = dev_get_priv(dev);
+ struct udevice *adsp = dev_get_parent(dev);
+ u32 bar0, offset;
+ int ret;
+
+ bar0 = dm_pci_read_bar32(adsp, 0);
+ if (!bar0) {
+ log_debug("Cannot read adsp bar0\n");
+ return -EINVAL;
+ }
+ offset = dev_read_addr_index(dev, 0);
+ if (offset == FDT_ADDR_T_NONE) {
+ log_debug("Cannot read address index 0\n");
+ return -EINVAL;
+ }
+ uc_priv->base_address = bar0 + offset;
+
+ /*
+ * Hard-code these values. If other settings are required we can add
+ * this to the device tree.
+ */
+ uc_priv->rfs = 64;
+ uc_priv->bfs = 32;
+ uc_priv->audio_pll_clk = 24 * 1000 * 1000;
+ uc_priv->samplingrate = 48000;
+ uc_priv->bitspersample = 16;
+ uc_priv->channels = 2;
+ uc_priv->id = 0;
+
+ priv->shim = (struct i2s_shim_regs *)uc_priv->base_address;
+ priv->sfrm_polarity = SSP_FRMS_ACTIVE_LOW;
+ priv->end_transfer_state = SSP_END_TRANSFER_STATE_LOW;
+ priv->sclk_mode = SCLK_MODE_DDF_DSR_ISL;
+ priv->rel_timing = NEXT_FRMS_WITH_LSB_PREVIOUS_FRM;
+ priv->sclk_dummy_stop = 0;
+ priv->sclk_frame_width = 31;
+
+ offset = dev_read_addr_index(dev, 1 + uc_priv->id);
+ if (offset == FDT_ADDR_T_NONE) {
+ log_debug("Cannot read address index %d\n", 1 + uc_priv->id);
+ return -EINVAL;
+ }
+ log_debug("bar0=%x, uc_priv->base_address=%x, offset=%x\n", bar0,
+ uc_priv->base_address, offset);
+ priv->regs = (struct broadwell_i2s_regs *)(bar0 + offset);
+
+ ret = bdw_i2s_init(dev);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static const struct i2s_ops broadwell_i2s_ops = {
+ .tx_data = broadwell_i2s_tx_data,
+};
+
+static const struct udevice_id broadwell_i2s_ids[] = {
+ { .compatible = "intel,broadwell-i2s" },
+ { }
+};
+
+U_BOOT_DRIVER(broadwell_i2s) = {
+ .name = "broadwell_i2s",
+ .id = UCLASS_I2S,
+ .of_match = broadwell_i2s_ids,
+ .probe = broadwell_i2s_probe,
+ .ops = &broadwell_i2s_ops,
+ .priv_auto_alloc_size = sizeof(struct broadwell_i2s_priv),
+};
diff --git a/drivers/sound/broadwell_i2s.h b/drivers/sound/broadwell_i2s.h
new file mode 100644
index 00000000000..ba87abfc6ae
--- /dev/null
+++ b/drivers/sound/broadwell_i2s.h
@@ -0,0 +1,301 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Intel Broadwell I2S driver
+ *
+ * Copyright 2019 Google LLC
+ *
+ * Modified from dc i2s/broadwell/broadwell.h
+ */
+
+#ifndef __BROADWELL_I2S_H__
+#define __BROADWELL_I2S_H__
+
+enum {
+ SSP_FIFO_SIZE = 7,
+};
+
+enum frame_sync_rel_timing_t {
+ NEXT_FRMS_AFTER_END_OF_T4 = 0,
+ NEXT_FRMS_WITH_LSB_PREVIOUS_FRM,
+};
+
+enum frame_sync_pol_t {
+ SSP_FRMS_ACTIVE_LOW = 0,
+ SSP_FRMS_ACTIVE_HIGH,
+};
+
+enum end_transfer_state_t {
+ SSP_END_TRANSFER_STATE_LOW = 0,
+ SSP_END_TRANSFER_STATE_PEVIOUS_BIT,
+};
+
+enum clock_mode_t {
+ /* Data driven (falling), data sampled (rising), idle state (low) */
+ SCLK_MODE_DDF_DSR_ISL,
+ /* Data driven (rising), data sampled (falling), idle state (low) */
+ SCLK_MODE_DDR_DSF_ISL,
+ /* Data driven (rising), data sampled (falling), idle state (high) */
+ SCLK_MODE_DDR_DSF_ISH,
+ /* Data driven (falling), data sampled (rising), idle state (high) */
+ SCLK_MODE_DDF_DSR_ISH,
+};
+
+struct i2s_shim_regs {
+ u32 csr; /* 0x00 */
+ u32 reserved0[29]; /* 0x14 - 0x77 */
+ u32 clkctl; /* 0x78 */
+ u32 reserved1; /* 0x7c */
+ u32 cs2; /* 0x80 */
+};
+
+struct broadwell_i2s_regs {
+ u32 sscr0; /* 0x00 */
+ u32 sscr1; /* 0x04 */
+ u32 sssr; /* 0x08 */
+ u32 ssitr; /* 0x0c */
+ u32 ssdr; /* 0x10 */
+ u32 reserved0[5]; /* 0x14 - 0x27 */
+ u32 ssto; /* 0x28 */
+ u32 sspsp; /* 0x2c */
+ u32 sstsa; /* 0x30 */
+ u32 ssrsa; /* 0x34 */
+ u32 sstss; /* 0x38 */
+ u32 sscr2; /* 0x40 */
+ u32 sspsp2; /* 0x44 */
+};
+
+/* SHIM Configuration & Status */
+enum {
+ /* Low Power Clock Select */
+ SHIM_CS_LPCS = 1 << 31,
+ /* SSP Force Clock Running */
+ SHIM_CS_SFCR_SSP1 = 1 << 28,
+ SHIM_CS_SFCR_SSP0 = 1 << 27,
+ /* SSP1 IO Clock Select */
+ SHIM_CS_S1IOCS = 1 << 23,
+ /* SSP0 IO Clock Select */
+ SHIM_CS_S0IOCS = 1 << 21,
+ /* Parity Check Enable */
+ SHIM_CS_PCE = 1 << 15,
+ /* SSP DMA or PIO Mode */
+ SHIM_CS_SDPM_PIO_SSP1 = 1 << 12,
+ SHIM_CS_SDPM_DMA_SSP1 = 0 << 12,
+ SHIM_CS_SDPM_PIO_SSP0 = 1 << 11,
+ SHIM_CS_SDPM_DMA_SSP0 = 0 << 11,
+ /* Run / Stall */
+ SHIM_CS_STALL = 1 << 10,
+ /* DSP Clock Select */
+ SHIM_CS_DCS_DSP320_AF80 = 0 << 4,
+ SHIM_CS_DCS_DSP160_AF80 = 1 << 4,
+ SHIM_CS_DCS_DSP80_AF80 = 2 << 4,
+ SHIM_CS_DCS_DSP320_AF160 = 4 << 4,
+ SHIM_CS_DCS_DSP160_AF160 = 5 << 4,
+ SHIM_CS_DCS_DSP32_AF32 = 6 << 4,
+ SHIM_CS_DCS_MASK = 7 << 4,
+ /* SSP Base Clock Select */
+ SHIM_CS_SBCS_SSP0_24MHZ = 1 << 3,
+ SHIM_CS_SBCS_SSP0_32MHZ = 0 << 3,
+ SHIM_CS_SBCS_SSP1_24MHZ = 1 << 2,
+ SHIM_CS_SBCS_SSP1_32MHZ = 0 << 2,
+ /* DSP Core Reset */
+ SHIM_CS_RST = 1 << 1,
+};
+
+/* SHIM Clock Control */
+enum {
+ /* Clock Frequency Change In Progress */
+ SHIM_CLKCTL_CFCIP = 1 << 31,
+ /* SSP MCLK Output Select */
+ SHIM_CLKCTL_MCLK_MASK = 0x3,
+ SHIM_CLKCTL_MCLK_SHIFT = 24,
+ SHIM_CLKCTL_MCLK_DISABLED = 0 << 24,
+ SHIM_CLKCTL_MCLK_6MHZ = 1 << 24,
+ SHIM_CLKCTL_MCLK_12MHZ = 2 << 24,
+ SHIM_CLKCTL_MCLK_24MHZ = 3 << 24,
+ /* DSP Core Prevent Local Clock Gating */
+ SHIM_CLKCTL_DCPLCG = 1 << 18,
+ /* SSP Clock Output Enable */
+ SHIM_CLKCTL_SCOE_SSP1 = 1 << 17,
+ SHIM_CLKCTL_SCOE_SSP0 = 1 << 16,
+ /* DMA Engine Force Local Clock Gating */
+ SHIM_CLKCTL_DEFLCGB_DMA1_CGE = 0 << 6,
+ SHIM_CLKCTL_DEFLCGB_DMA1_CGD = 1 << 6,
+ SHIM_CLKCTL_DEFLCGB_DMA0_CGE = 0 << 5,
+ SHIM_CLKCTL_DEFLCGB_DMA0_CGD = 1 << 5,
+ /* SSP Force Local Clock Gating */
+ SHIM_CLKCTL_SFLCGB_SSP1_CGE = 0 << 1,
+ SHIM_CLKCTL_SFLCGB_SSP1_CGD = 1 << 1,
+ SHIM_CLKCTL_SFLCGB_SSP0_CGE = 0 << 0,
+ SHIM_CLKCTL_SFLCGB_SSP0_CGD = 1 << 0,
+
+ /* Reserved bits: 30:26, 23:19, 15:7, 4:2 */
+ SHIM_CLKCTL_RESERVED = 0x1f << 26 | 0x1f << 19 | 0x1ff << 7 | 0x7 << 2,
+};
+
+/* SSP Status */
+enum {
+ /* Bit Count Error */
+ SSP_SSS_BCE = 1 << 23,
+ /* Clock Sync Statu s*/
+ SSP_SSS_CSS = 1 << 22,
+ /* Transmit FIFO Underrun */
+ SSP_SSS_TUR = 1 << 21,
+ /* End Of Chain */
+ SSP_SSS_EOC = 1 << 20,
+ /* Receiver Time-out Interrupt */
+ SSP_SSS_TINT = 1 << 19,
+ /* Peripheral Trailing Byte Interrupt */
+ SSP_SSS_PINT = 1 << 18,
+ /* Received FIFO Level */
+ SSP_RFL_MASK = 0xf,
+ SSP_RFL_SHIFT = 12,
+ /* Transmit FIFO Level */
+ SSP_TFL_MASK = 0xf,
+ SSP_TFL_SHIFT = 8,
+ /* Receive FIFO Overrun */
+ SSP_SSS_ROR = 1 << 7,
+ /* Receive FIFO Service Request */
+ SSP_SSS_RFS = 1 << 6,
+ /* Transmit FIFO Service Request */
+ SSP_SSS_TFS = 1 << 5,
+ /* SSP Busy */
+ SSP_SSS_BSY = 1 << 4,
+ /* Receive FIFO Not Empty */
+ SSP_SSS_RNE = 1 << 3,
+ /* Transmit FIFO Not Full */
+ SSP_SSS_TNF = 1 << 2,
+};
+
+/* SSP Control 0 */
+enum {
+ /* Mode */
+ SSP_SSC0_MODE_NORMAL = 0 << 31,
+ SSP_SSC0_MODE_NETWORK = 1 << 31,
+ /* Audio Clock Select */
+ SSP_SSC0_ACS_PCH = 0 << 30,
+ /* Frame Rate Divider Control (0-7) */
+ SSP_SSC0_FRDC_MASK = 0x7,
+ SSP_SSC0_FRDC_SHIFT = 24,
+ SSP_SSC0_FRDC_STEREO = 1 << 24,
+ /* Transmit FIFO Underrun Interrupt Mask */
+ SSP_SSC0_TIM = 1 << 23,
+ /* Receive FIFO Underrun Interrupt Mask */
+ SSP_SSC0_RIM = 1 << 22,
+ /* Network Clock Select */
+ SSP_SSC0_NCS_PCH = 0 << 21,
+ /* Extended Data Size Select */
+ SSP_SSC0_EDSS = 1 << 20,
+ /* Serial Clock Rate (0-4095) */
+ SSP_SSC0_SCR_SHIFT = 8,
+ SSP_SSC0_SCR_MASK = 0xfff << SSP_SSC0_SCR_SHIFT,
+ /* Synchronous Serial Port Enable */
+ SSP_SSC0_SSE = 1 << 7,
+ /* External Clock Select */
+ SSP_SSC0_ECS_PCH = 0 << 6,
+ /* Frame Format */
+ SSP_SSC0_FRF_MOTOROLA_SPI = 0 << 4,
+ SSP_SSC0_FRF_TI_SSP = 1 << 4,
+ SSP_SSC0_FRF_NS_MICROWIRE = 2 << 4,
+ SSP_SSC0_FRF_PSP = 3 << 4,
+ /* Data Size Select */
+ SSP_SSC0_DSS_SHIFT = 0,
+ SSP_SSC0_DSS_MASK = 0xf << SSP_SSC0_DSS_SHIFT,
+};
+
+/* SSP Control 1 */
+enum {
+ /* TXD Tristate Enable on Last Phase */
+ SSP_SSC1_TTELP = 1 << 31,
+ /* TXD Tristate Enable */
+ SSP_SSC1_TTE = 1 << 30,
+ /* Enable Bit Count Error Interrupt */
+ SSP_SSC1_EBCEI = 1 << 29,
+ /* Slave Clock Running */
+ SSP_SSC1_SCFR = 1 << 28,
+ /* Enable Clock Request A */
+ SSP_SSC1_ECRA = 1 << 27,
+ /* Enable Clock Request B */
+ SSP_SSC1_ECRB = 1 << 26,
+ /* SSPCLK Direction */
+ SSP_SSC1_SCLKDIR_SLAVE = 1 << 25,
+ SSP_SSC1_SCLKDIR_MASTER = 0 << 25,
+ /* SSPFRM Direction */
+ SSP_SSC1_SFRMDIR_SLAVE = 1 << 24,
+ SSP_SSC1_SFRMDIR_MASTER = 0 << 24,
+ /* Receive without Transmit */
+ SSP_SSC1_RWOT = 1 << 23,
+ /* Trailing Byte */
+ SSP_SSC1_TRAIL = 1 << 22,
+ /* DMA Tx Service Request Enable */
+ SSP_SSC1_TSRE = 1 << 21,
+ /* DMA Rx Service Request Enable */
+ SSP_SSC1_RSRE = 1 << 20,
+ /* Receiver Timeout Interrupt Enable */
+ SSP_SSC1_TINTE = 1 << 19,
+ /* Periph. Trailing Byte Int. Enable */
+ SSP_SSC1_PINTE = 1 << 18,
+ /* Invert Frame Signal */
+ SSP_SSC1_IFS = 1 << 16,
+ /* Select FIFO for EFWR: test mode */
+ SSP_SSC1_STRF = 1 << 15,
+ /* Enable FIFO Write/Read: test mode */
+ SSP_SSC1_EFWR = 1 << 14,
+ /* Receive FIFO Trigger Threshold */
+ SSP_SSC1_RFT_SHIFT = 10,
+ SSP_SSC1_RFT_MASK = 0xf << SSP_SSC1_RFT_SHIFT,
+ /* Transmit FIFO Trigger Threshold */
+ SSP_SSC1_TFT_SHIFT = 6,
+ SSP_SSC1_TFT_MASK = 0xf << SSP_SSC1_TFT_SHIFT,
+ /* Microwire Transmit Data Size */
+ SSP_SSC1_MWDS = 1 << 5,
+ /* Motorola SPI SSPSCLK Phase Setting*/
+ SSP_SSC1_SPH = 1 << 4,
+ /* Motorola SPI SSPSCLK Polarity */
+ SSP_SSC1_SPO = 1 << 3,
+ /* Loopback mode: test mode */
+ SSP_SSC1_LBM = 1 << 2,
+ /* Transmit FIFO Interrupt Enable */
+ SSP_SSC1_TIE = 1 << 1,
+ /* Receive FIFO Interrupt Enable */
+ SSP_SSC1_RIE = 1 << 0,
+
+ SSP_SSC1_RESERVED = 17 << 1,
+};
+
+/* SSP Programmable Serial Protocol */
+enum {
+ /* Extended Dummy Stop (0-31) */
+ SSP_PSP_EDYMSTOP_SHIFT = 26,
+ SSP_PSP_EDMYSTOP_MASK = 0x7 << SSP_PSP_EDYMSTOP_SHIFT,
+ /* Frame Sync Relative Timing */
+ SSP_PSP_FSRT = 1 << 25,
+ /* Dummy Stop low bits */
+ SSP_PSP_DMYSTOP_SHIFT = 23,
+ SSP_PSP_DMYSTOP_MASK = 0x3 << SSP_PSP_DMYSTOP_SHIFT,
+ /* Serial Frame Width */
+ SSP_PSP_SFRMWDTH_SHIFT = 16,
+ SSP_PSP_SFRMWDTH_MASK = 0x3f << SSP_PSP_SFRMWDTH_SHIFT,
+ /* Serial Frame Delay */
+ SSP_PSP_SFRMDLY_MASK = 0x7f,
+ SSP_PSP_SFRMDLY_SHIFT = 9,
+ /* Start Delay */
+ SSP_PSP_STRTDLY_MASK = 0x7,
+ SSP_PSP_STRTDLY_SHIFT = 4,
+ /* End of Transfer Data State */
+ SSP_PSP_ETDS = 1 << 3,
+ /* Serial Frame Polarity */
+ SSP_PSP_SFRMP = 1 << 2,
+ /* Serial Clock Mode */
+ SSP_PSP_SCMODE_SHIFT = 0,
+ SSP_PSP_SCMODE_MASK = 0x3 << SSP_PSP_SCMODE_SHIFT,
+
+ SSP_PSP_RESERVED = 1 << 22,
+};
+
+/* SSP TX Time Slot Active */
+enum {
+ SSP_SSTSA_EN = 1 << 8,
+ SSP_SSTSA_MASK = 0xff,
+};
+
+#endif /* __BROADWELL_I2S_H__ */
--
2.21.0.rc0.258.g878e2cd30e-goog
More information about the U-Boot
mailing list