[U-Boot] [PATCH v2 3/7] ARM: zynq: Remove addresses for i2c controllers

[Michal Simek]

All platforms have been converted to DM that's why there is no reason to
keep addresses in headers. They are all read from DT now.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

Changes in v2: None

 arch/arm/mach-zynq/include/mach/hardware.h | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm/mach-zynq/include/mach/hardware.h b/arch/arm/mach-zynq/include/mach/hardware.h
index 58b6f95395a4..5412ed682797 100644
--- a/arch/arm/mach-zynq/include/mach/hardware.h
+++ b/arch/arm/mach-zynq/include/mach/hardware.h
@@ -9,8 +9,6 @@
 #define ZYNQ_SYS_CTRL_BASEADDR		0xF8000000
 #define ZYNQ_DEV_CFG_APB_BASEADDR	0xF8007000
 #define ZYNQ_SCU_BASEADDR		0xF8F00000
-#define ZYNQ_I2C_BASEADDR0		0xE0004000
-#define ZYNQ_I2C_BASEADDR1		0xE0005000
 #define ZYNQ_QSPI_BASEADDR		0xE000D000
 #define ZYNQ_SMC_BASEADDR		0xE000E000
 #define ZYNQ_NAND_BASEADDR		0xE1000000
-- 
1.9.1