[U-Boot] [PATCH 5/7] arm: mach-k3: Add secure device build support
Lokesh Vutla
lokeshvutla at ti.com
Fri Feb 15 12:13:32 UTC 2019
On 2/15/2019 4:25 AM, Andrew F. Davis wrote:
> On 2/13/19 9:46 PM, Lokesh Vutla wrote:
>>
>>
>> On 14/02/19 12:07 AM, Andrew F. Davis wrote:
>>> K3 HS devices require signed binaries for boot, use the SECDEV tools
>>> to sign the boot artifacts during build.
>>>
>>> Signed-off-by: Andrew F. Davis <afd at ti.com>
>>> ---
>>> MAINTAINERS | 1 +
>>> arch/arm/mach-k3/config.mk | 25 ++++++++++++++++++
>>> arch/arm/mach-k3/config_secure.mk | 44 +++++++++++++++++++++++++++++++
>>> tools/k3_fit_atf.sh | 8 ++++--
>>> 4 files changed, 76 insertions(+), 2 deletions(-)
>>> create mode 100644 arch/arm/mach-k3/config_secure.mk
>>>
>>> diff --git a/MAINTAINERS b/MAINTAINERS
>>> index 18cdca9447..ac6bd8cfca 100644
>>> --- a/MAINTAINERS
>>> +++ b/MAINTAINERS
>>> @@ -717,6 +717,7 @@ F: arch/arm/mach-omap2/omap5/sec_entry_cpu1.S
>>> F: arch/arm/mach-omap2/sec-common.c
>>> F: arch/arm/mach-omap2/config_secure.mk
>>> F: arch/arm/mach-k3/security.c
>>> +F: arch/arm/mach-k3/config_secure.mk
>>> F: configs/am335x_hs_evm_defconfig
>>> F: configs/am335x_hs_evm_uart_defconfig
>>> F: configs/am43xx_hs_evm_defconfig
>>> diff --git a/arch/arm/mach-k3/config.mk b/arch/arm/mach-k3/config.mk
>>> index be00d79fb0..2d8f61f9db 100644
>>> --- a/arch/arm/mach-k3/config.mk
>>> +++ b/arch/arm/mach-k3/config.mk
>>> @@ -36,6 +36,14 @@ cmd_gencert = cat $(srctree)/tools/k3_x509template.txt | sed $(SED_OPTS) > u-boo
>>> # If external key is not provided, generate key using openssl.
>>> ifeq ($(CONFIG_SYS_K3_KEY), "")
>>> KEY=u-boot-spl-eckey.pem
>>> +# On HS use real key or warn if not available
>>> +ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
>>> +ifneq ($(wildcard $(TI_SECURE_DEV_PKG)/keys/custMpk.pem),)
>>> +KEY=$(TI_SECURE_DEV_PKG)/keys/custMpk.pem
>>> +else
>>> +$(warning "WARNING: signing key not found. Random key will NOT work on HS hardware!")
>>> +endif
>>> +endif
>>> else
>>> KEY=$(patsubst "%",$(srctree)/%,$(CONFIG_SYS_K3_KEY))
>>> endif
>>> @@ -65,6 +73,15 @@ ALL-y += tiboot3.bin
>>> endif
>>>
>>> ifdef CONFIG_ARM64
>>> +ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
>>> +SPL_ITS := u-boot-spl-k3_HS.its
>>> +$(SPL_ITS): FORCE
>>> + IS_HS=1 \
>>> + $(srctree)/tools/k3_fit_atf.sh \
>>> + $(patsubst %,$(obj)/dts/%.dtb,$(subst ",,$(CONFIG_SPL_OF_LIST))) > $@
>>> +
>>> +ALL-y += tispl.bin_HS
>>> +else
>>> SPL_ITS := u-boot-spl-k3.its
>>> $(SPL_ITS): FORCE
>>> $(srctree)/tools/k3_fit_atf.sh \
>>> @@ -72,7 +89,15 @@ $(SPL_ITS): FORCE
>>>
>>> ALL-y += tispl.bin
>>> endif
>>> +endif
>>> +
>>> +else
>>>
>>> +ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
>>> +ALL-y += u-boot.img_HS
>>> else
>>> ALL-y += u-boot.img
>>> endif
>>> +endif
>>> +
>>> +include $(srctree)/arch/arm/mach-k3/config_secure.mk
>>> diff --git a/arch/arm/mach-k3/config_secure.mk b/arch/arm/mach-k3/config_secure.mk
>>> new file mode 100644
>>> index 0000000000..6d63c57665
>>> --- /dev/null
>>> +++ b/arch/arm/mach-k3/config_secure.mk
>>> @@ -0,0 +1,44 @@
>>> +# SPDX-License-Identifier: GPL-2.0
>>> +#
>>> +# Copyright (C) 2018 Texas Instruments, Incorporated - http://www.ti.com/
>>> +# Andrew F. Davis <afd at ti.com>
>>> +
>>> +quiet_cmd_k3secureimg = SECURE $@
>>> +ifneq ($(TI_SECURE_DEV_PKG),)
>>> +ifneq ($(wildcard $(TI_SECURE_DEV_PKG)/scripts/secure-binary-image.sh),)
>>> +cmd_k3secureimg = $(TI_SECURE_DEV_PKG)/scripts/secure-binary-image.sh \
>>> + $< $@ \
>>> + $(if $(KBUILD_VERBOSE:1=), >/dev/null)
>>> +else
>>> +cmd_k3secureimg = echo "WARNING:" \
>>> + "$(TI_SECURE_DEV_PKG)/scripts/secure-binary-image.sh not found." \
>>> + "$@ was NOT secured!"; cp $< $@
>>> +endif
>>> +else
>>> +cmd_k3secureimg = echo "WARNING: TI_SECURE_DEV_PKG environment" \
>>> + "variable must be defined for TI secure devices." \
>>> + "$@ was NOT secured!"; cp $< $@
>>> +endif
>>> +
>>> +%.dtb_HS: %.dtb FORCE
>>> + $(call if_changed,k3secureimg)
>>> +
>>> +$(obj)/u-boot-spl-nodtb.bin_HS: $(obj)/u-boot-spl-nodtb.bin FORCE
>>> + $(call if_changed,k3secureimg)
>>> +
>>> +tispl.bin_HS: $(obj)/u-boot-spl-nodtb.bin_HS $(patsubst %,$(obj)/dts/%.dtb_HS,$(subst ",,$(CONFIG_SPL_OF_LIST))) $(SPL_ITS) FORCE
>>> + $(call if_changed,mkfitimage)
>>> +
>>> +MKIMAGEFLAGS_u-boot.img_HS = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
>>> + -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
>>> + -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
>>> + $(patsubst %,-b arch/$(ARCH)/dts/%.dtb_HS,$(subst ",,$(CONFIG_OF_LIST)))
>>
>> I guess these HS postfixed dtbs will never get cleaned. I see the same issue
>> with other TI secure devices as well. Can you update the clean rules as well?
>>
>
> tiboot3.bin and tispl.bin also don't seem to be getting cleaned. I tried
Yeah, these should be cleaned as well.
> adding them to clean-files and CLEAN_FILES, neither worked. Outside of
looks like clean-files is relative to the current directory. You can
update arch/arm/dts/Makefile but it might be very generic.
Tom, any suggestions to clean files in this case?
Thanks and regards,
Lokesh
> manually deleting them on an appended clean rule I don't know what the
> recommended trick is for this.
>
>> Thanks and regards,
>> Lokesh
>>
>>> +
>>> +OF_LIST_TARGETS = $(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST)))
>>> +$(OF_LIST_TARGETS): dtbs
>>> +
>>> +u-boot-nodtb.bin_HS: u-boot-nodtb.bin FORCE
>>> + $(call if_changed,k3secureimg)
>>> +
>>> +u-boot.img_HS: u-boot-nodtb.bin_HS u-boot.img $(patsubst %.dtb,%.dtb_HS,$(OF_LIST_TARGETS)) FORCE
>>> + $(call if_changed,mkimage)
>>> diff --git a/tools/k3_fit_atf.sh b/tools/k3_fit_atf.sh
>>> index 430b5ca616..4e9f69c087 100755
>>> --- a/tools/k3_fit_atf.sh
>>> +++ b/tools/k3_fit_atf.sh
>>> @@ -21,6 +21,10 @@ if [ ! -f $TEE ]; then
>>> TEE=/dev/null
>>> fi
>>>
>>> +if [ ! -z "$IS_HS" ]; then
>>> + HS_APPEND=_HS
>>> +fi
>>> +
>>> cat << __HEADER_EOF
>>> /dts-v1/;
>>>
>>> @@ -51,7 +55,7 @@ cat << __HEADER_EOF
>>> };
>>> spl {
>>> description = "SPL (64-bit)";
>>> - data = /incbin/("spl/u-boot-spl-nodtb.bin");
>>> + data = /incbin/("spl/u-boot-spl-nodtb.bin$HS_APPEND");
>>> type = "standalone";
>>> os = "U-Boot";
>>> arch = "arm64";
>>> @@ -66,7 +70,7 @@ do
>>> cat << __FDT_IMAGE_EOF
>>> $(basename $dtname) {
>>> description = "$(basename $dtname .dtb)";
>>> - data = /incbin/("$dtname");
>>> + data = /incbin/("$dtname$HS_APPEND");
>>> type = "flat_dt";
>>> arch = "arm";
>>> compression = "none";
>>>
More information about the U-Boot
mailing list