[U-Boot] [PATCH v2 3/4] mmc: stm32_sdmmc2: Update DT properties with v4.19 bindings

[Patrice Chotard]

From: Patrick Delaunay <patrick.delaunay at st.com>

Some properties name has been updated:
  - st,dirpol becomes st,sig-dir
  - st,negedge becomes st,neg-edge
  - st,pin-ckin becomes st,use-ckin

Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
Signed-off-by: Patrice Chotard <patrice.chotard at st.com>
---

Changes in v2:
     - Remove a "Reviewed-by: CITOOLS ..."

 drivers/mmc/stm32_sdmmc2.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/stm32_sdmmc2.c b/drivers/mmc/stm32_sdmmc2.c
index a36612dd937e..bab7efe754aa 100644
--- a/drivers/mmc/stm32_sdmmc2.c
+++ b/drivers/mmc/stm32_sdmmc2.c
@@ -585,11 +585,11 @@ static int stm32_sdmmc2_probe(struct udevice *dev)
 	if (priv->base == FDT_ADDR_T_NONE)
 		return -EINVAL;
 
-	if (dev_read_bool(dev, "st,negedge"))
+	if (dev_read_bool(dev, "st,neg-edge"))
 		priv->clk_reg_msk |= SDMMC_CLKCR_NEGEDGE;
-	if (dev_read_bool(dev, "st,dirpol"))
+	if (dev_read_bool(dev, "st,sig-dir"))
 		priv->pwr_reg_msk |= SDMMC_POWER_DIRPOL;
-	if (dev_read_bool(dev, "st,pin-ckin"))
+	if (dev_read_bool(dev, "st,use-ckin"))
 		priv->clk_reg_msk |= SDMMC_CLKCR_SELCLKRX_CKIN;
 
 	ret = clk_get_by_index(dev, 0, &priv->clk);
-- 
1.9.1