[U-Boot] [PATCH v2 2/8] arm: socfpga: gen5: add reset & sdr node to SPL devicetrees

Marek Vasut marex at denx.de
Fri Feb 22 16:07:08 UTC 2019


On 2/22/19 7:20 AM, Simon Goldschmidt wrote:
> On Thu, Feb 21, 2019 at 11:13 PM Marek Vasut <marex at denx.de> wrote:
>>
>> On 2/21/19 11:11 PM, Simon Goldschmidt wrote:
>>>
>>>
>>> Am Do., 21. Feb. 2019, 23:05 hat Marek Vasut <marex at denx.de
>>> <mailto:marex at denx.de>> geschrieben:
>>>
>>>     On 2/21/19 11:03 PM, Simon Goldschmidt wrote:
>>>     >
>>>     >
>>>     > Am Do., 21. Feb. 2019, 22:56 hat Marek Vasut <marex at denx.de
>>>     <mailto:marex at denx.de>
>>>     > <mailto:marex at denx.de <mailto:marex at denx.de>>> geschrieben:
>>>     >
>>>     >     On 2/21/19 10:43 PM, Simon Goldschmidt wrote:
>>>     >     > The SPL for socfpga gen5 currently takes all peripherals out
>>>     of reset
>>>     >     > unconditionally. To implement proper reset handling for
>>>     peripherals,
>>>     >     > the reset node has to be provided with the SPL dts.
>>>     >     >
>>>     >     > In preparation to move the DDR driver to DM, the sdr node is
>>>     required
>>>     >     > in SPL, too.
>>>     >     >
>>>     >     > This patch adds "u-boot,dm-pre-reloc" to U-Boot specific
>>>     dtsi addon
>>>     >     > files so that the reset manager and SDR driver correctly
>>>     probe in SPL.
>>>     >     >
>>>     >     > Signed-off-by: Simon Goldschmidt
>>>     <simon.k.r.goldschmidt at gmail.com
>>>     <mailto:simon.k.r.goldschmidt at gmail.com>
>>>     >     <mailto:simon.k.r.goldschmidt at gmail.com
>>>     <mailto:simon.k.r.goldschmidt at gmail.com>>>
>>>     >     > ---
>>>     >     >
>>>     >     > Changes in v2: None
>>>     >     >
>>>     >     >  arch/arm/dts/socfpga_arria5_socdk-u-boot.dtsi          | 8
>>>     ++++++++
>>>     >     >  arch/arm/dts/socfpga_cyclone5_dbm_soc1.dts             | 8
>>>     ++++++++
>>>     >     >  arch/arm/dts/socfpga_cyclone5_de0_nano_soc-u-boot.dtsi | 8
>>>     ++++++++
>>>     >     >  arch/arm/dts/socfpga_cyclone5_de10_nano.dts            | 8
>>>     ++++++++
>>>     >     >  arch/arm/dts/socfpga_cyclone5_de1_soc.dts              | 8
>>>     ++++++++
>>>     >     >  arch/arm/dts/socfpga_cyclone5_is1.dts                  | 8
>>>     ++++++++
>>>     >     >  arch/arm/dts/socfpga_cyclone5_socdk-u-boot.dtsi        | 8
>>>     ++++++++
>>>     >     >  arch/arm/dts/socfpga_cyclone5_sockit-u-boot.dtsi       | 8
>>>     ++++++++
>>>     >     >  arch/arm/dts/socfpga_cyclone5_socrates-u-boot.dtsi     | 8
>>>     ++++++++
>>>     >     >  arch/arm/dts/socfpga_cyclone5_sr1500.dts               | 8
>>>     ++++++++
>>>     >     >  arch/arm/dts/socfpga_cyclone5_vining_fpga-u-boot.dtsi  | 8
>>>     ++++++++
>>>     >     >  11 files changed, 88 insertions(+)
>>>     >     >
>>>     >     > diff --git a/arch/arm/dts/socfpga_arria5_socdk-u-boot.dtsi
>>>     >     b/arch/arm/dts/socfpga_arria5_socdk-u-boot.dtsi
>>>     >     > index c44d1ee2fa..8aaec56285 100644
>>>     >     > --- a/arch/arm/dts/socfpga_arria5_socdk-u-boot.dtsi
>>>     >     > +++ b/arch/arm/dts/socfpga_arria5_socdk-u-boot.dtsi
>>>     >     > @@ -17,6 +17,14 @@
>>>     >     >       };
>>>     >     >  };
>>>     >     >
>>>     >     > +&rst {
>>>     >     > +     u-boot,dm-pre-reloc;
>>>     >     > +};
>>>     >     > +
>>>     >     > +&sdr {
>>>     >     > +     u-boot,dm-pre-reloc;
>>>     >     > +};
>>>     >
>>>     >     What about some socfpga-common-u-boot.dtsi to avoid duplication ?
>>>     >
>>>     >
>>>     > Right. I tested with 'socfpga-u-boot.dtsi' but the hot included for
>>>     > gen10 as well.
>>>
>>>     hot included ? I don't think I understand.
>>>
>>>
>>> Argh. I'm writing from my mobile...
>>
>> It can wait till tomorrow ...
>>
>>> What I meant was that file got included by the automatism so I couldn't
>>> use it.
>> Errr, which file ? What automatism ? Really, wait till tomorrow with a
>> reply, please.
> 
> Let me try again: I started this patch with trying to centralize the
> "u-boot,dm-pre-reloc"
> lines in one file named "socfpga-u-boot.dtsi" since it is valid for
> all gen5 devices
> and including it automatically would be OK.
> 
> However, the automatism to search for a "-u-boot.dtsi" file caught
> that file also for
> a10 and even s10 due to the lack of a more specific match.
> 
> In the end I dropped that idea and added it to all board dtsi files.
> 
> However, by using a name that doesn't match the automatism rules, I
> can centralize
> these settings. I'll do that for V3.

I think applying it on A10 would be fine too, dunno about S10.

-- 
Best regards,
Marek Vasut


More information about the U-Boot mailing list